Text preview for : TP03(05)AD.pdf part of TOPPOWER TP03AD,TP05AD 3W-5W AC-DC CONVERTERS
Back to : TP03(05)AD.pdf | Home
TP03(05)AD Series
DESCRIPTION 3W, 5W 3KVAC Isolation Wide Input AC/DC Converters
TP03(05)AD series is 3W ,5W with wide input voltage range, for both AC input and DC input application, come
with Low power consumption <0.05W , low Leakage current @0.1mA ,miniature size:35*25.4*18mm ,and
good EMC performance, can meet the EMC and safety specifications: IEC / EN61000-4 CISPR32 / EN55032,
UL62368, EN62368, IEC62368 and other related standards. This series of power supplies have important
applications in many fields such as LED, street light control, industry, office and civil industries ,etc.***please
refer to the application circuit when the parts is applied in the environment with severe electromagnetic
compatibility.
FEATURES
Universal input voltage range Low Ripple &Noise Wide input voltage: 4:1
Low power consumption <0.05W High efficiency, high power density, miniature Over load/short circuit protection
Both for AC and DC input voltage RoHS compliant Operating temperature: -40 to 70
SELECTION GUIDE
Input Output Efficiency (Typ. )
Part Number
Voltage VAC Voltage VDC VoltageVDC) CurrentA %
TP03AD220S03W 85-305 120-430 3.3 0.70 66
TP03AD220S05W 85-305 120-430 5 0.60 76
TP03AD220S09W 85-305 120-430 9 0.33 78
TP03AD220S12W 85-305 120-430 12 0.25 79
TP03AD220S15W 85-305 120-430 15 0.20 80
TP03AD220S24W 85-305 120-430 24 0.12 81
TP05AD220S03W 85-305 120-430 3.3 1.00 68
TP05AD220S05W 85-305 120-430 5 1.00 78
TP05AD220S09W 85-305 120-430 9 0.56 79
TP05AD220S12W 85-305 120-430 12 0.42 80
TP05AD220S15W 85-305 120-430 15 0.33 81
TP05AD220S24W 85-305 120-430 24 0.21 81
All specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified.
INPUT SPECIFICATIONS
Parameter Conditions Min. Typ. Max. Units
Input Voltage Range DC input 120 220 430 VDC
Input Voltage Range AC input 85 220 305 VAC
Input Frequency 47 440 HZ
Input Current 115VAC 95 mA
Input Current 230VAC 46 mA
Inrush Current 115VAC 10 A
Inrush Current 230VAC 30 A
Recommended External Fuse Fusible resistor10/1W
Hot Plug Unavailable
Leakage current 0.1mA at 265VAC/50Hz
OUTPUT SPECIFICATIONS
Parameter Conditions Min. Typ. Max. Units
Output Voltage Accuracy ±2 %
Output Voltage Accuracy 3.3Voutput
±3 %
Line Regulation ±1 %
Load Regulation ±1 %
Short Circuit Protection over-voltage/over-current/short circuit protection, self-recovery
Temperature Coefficient 0~50 ±0.03 %/
Start rising time 115VACinput 200 ms
Start rising time 230VACinput 100 ms
www.gztoppower.com TEL:0086-20-62162688 Email:[email protected] Page
1/3
TP03(05)AD Series
Output hold time 115VACinput 15 ms
Output hold time 230VAC input 40 ms
ENVIRONMENT CHARACTERISTICS
Parameter Conditions Min. Typ. Max. Units
Operating Temperature 50,[email protected]/ -40 +70
Storage Temperature -40 +85
Storage Humidity 10 95 % .RH max
Operating Humidity 85%.RHmax
Vibration coefficient 10~500Hz,2G10min./1cycle,60min.eachalongX,Y,Zaxes
Case temperature shall not exceed the maximum case temperature.
SAFETY & ELECTROMAGNETIC COMPATIBILITY
Safety Standard EN60950,EN60601,UL60950
Isolation voltage I/P-O/P:4000VAC
Isolation resistance I/P-O/P>100M Ohms/500VDC 25 70% RH
Conduction and Radiation EN55011, EN55022 (CISPR22) CLASS B (refer toTypical application circuit)
Electrostatic Discharge (ESD) IEC/EN 61000-4-2 level 4 8kV/15kV (refer toTypical application circuit)
RF radiation immunity (RF) IEC/EN 61000-4-3 (refer toTypical application circuit)
Electrical Fast Transient Burst (EFT) IEC/EN 61000-4-4 level 4 4kV (refer toTypical application circuit)
Surge IEC/EN 61000-4-5 level 4 2kV
MTBF 200K hrs min. MIL-HDBK-217F(25)
NOTES
1 The data in this manual are measured at TA=25 ° C, humidity <75%, input nominal voltage 230Vac and output rated load,except for special instructions.
2 Ripple and noise are measured with a bandwidth of 20MHz, using a 300mm twisted pair, and a 0.1uF high-frequency ceramic capacitor and a 47uF electrolytic
capacitor in parallel at the same time.
3This power supply is considered as a component in the system, and it is necessary to confirm the electromagnetic compatibility with the terminal equipment.
APPLICATION CIRCUIT
Notes:
1. C4 is electrolytic capacitor ,recommend to use High-frequency low-resistance electrolytic capacitor
(the capacitance and current refer to data sheet) ,C5 is to filter out high frequency noise
2. The EMC filter within the dashed box is connected to meet the higher EMC requirements.it is not necessary in the general application
3.The components L1,CX,NF in the dashed box, we have made them into a filter , Named PN: FA01
APPLICATION CIRCUIT TYPICAL VALUES
www.gztoppower.com TEL:0086-20-62162688 Email:[email protected] Page
2/3
TP03(05)AD Series
Component FUSE R NF MOV CX L1 C5 C4 D1
PN
3.3V output NF is 470uF/16V P6KE6.8A
MOV is
5V output Common-mode CX is Safety 470uF/16V P6KE6.8A
Fusible Varistors, 104K/50V
9V output inductance, grade 1Mh 150uF/16V P6KE16A
/ resistor recommende ceramic
12V output the value capacitance /0.5A 120uF/16V P6KE16A
10/1W d value capacitor
15V output 30mH, ,104K/275V 120uF/25V P6KE20A
14D561K
24V output current 0.5A. 100uF/35V P6KE33A
RATING GR
MECHANICAL DIMENSIONS
DIP package
PIN design
1 AC(L)
3 AC(N)
13 NC
14 -Vo
16 +Vo
Unit: MM
PIN length 4.0 MM PIN diameter0.8 MM
tolerance of PIN diameter±0.1MM Unmarked tolerances :±0.5MM
SELECTION GUIDE
TP 03 A D 220 S 05 W
W:4:1 Wide voltage input range
Main (auxiliary) output voltage
S:single output
Rated input voltage
Package type
AC-DC
Rated output power
Brand name
www.gztoppower.com TEL:0086-20-62162688 Email:[email protected] Page
3/3