Text preview for : 2LV-003.pdf part of Kyocera 2LV-003 Kyocera Printer FS-2100-4100-4200-4300 ServiceBulletin 2LV-003.pdf
Back to : 2LV-003.pdf | Home
Service Bulletin Page 1/1
C320 / SB 2LV-003
SB Number: SB 2LV-003 Creation Date: 28/01/2013
Proper formatting of SSD (Optional HD-6) (Error code F264/
Subject:
F27A)
Model: FS-2100D/2100DN/4100DN/4200DN/4300DN
Contents
Formatting of the SSD (Optional HD-6) may not be possible and system error F246 or F27A may appear, when the
machine recovers from sleep mode while formatting as mentioned in "Operation route" in the table below.
CLEAR THE ABOVE MENTIONED ERROR CODES BY TURNING THE MAIN SWITCH OFF AND ON.
Formatting will be possible afterwards. Execute [Format SSD] on the operation panel menu before the machine
enters sleep mode.
Operation route Machine operation
1 Unused SSD (HD-6) is installed in the main body [Format SSD] is displayed.
and the main switch is turned ON.
2 Main body operates until in enters sleep mode
(Initial setting is 1 minute).
3 Main body recovers from sleep mode. Models without network connection may indicate error code
F27A afterwards.
4 Formatting SSD (HD-6) is executed from the Network models may indicate error code F264 afterwards.
operation panel menu.
Classification Entire stock rework In-field modification at next visit X In-field modification by case No modification necessary
Field measure Please note the content of this service bulletin.
KDIS Service Department, KYOCERA Document Solutions Europe B.V.