Text preview for : 6319D-TE.pdf part of MAKITA 6319D-TE MAKITA 6319D-TE.pdf
Back to : 6319D-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. 6319D/ 6339D/ 6349D
L
PRODUCT
P 1 / 12
Description Cordless Driver Drills 12V/ 14.4V/ 18V
CONCEPT AND MAIN APPLICATIONS
The above products have been developed as successor models
H
of the current 6343D series models and as the highest grade
series models among Makita Cordless Driver Drills.
Their brief advantages are;
*Powerful motor provides high operation efficiency.
*Mechanical 3-speed;
W
3rd speed: higher than the predecessors for finishing
light duty jobs with extremely high efficiency
Dimensions: mm (")
1st speed: lower than the predecessors for extra-heavy
Model No. 6319D 6339D 6349D
duty applications
*Easy operation mode change Length (L) 246 (9-11/16)
*All the great advantages as Model 6343D series models Width (W) 94 (3-11/16) 94 (3-11/16) 95 (3-3/4)
Height (H) 243 (9-9/16) 247 (9-3/4) 252 (9-7/8)
These new products are available in the following variations:
6319D
Battery Battery cover
Model No. (quantity) Charger Flash light
type Quantity
6319DWAE 1222 (Ni-Cd 2.0Ah) 2 2
w/o light
6319DWAE3 1222 (Ni-Cd 2.0Ah) 3 3
6319DWALE 1222 (Ni-Cd 2.0Ah) 2 2 ML120
6319DWDE 1234 (Ni-MH 2.6Ah) 2 2
DC1414 w/o light
6319DWDE3 1234 (Ni-MH 2.6Ah) 3 3
6319DWDLE 1234 (Ni-MH 2.6Ah) 2 2 ML120
6319DWFE 1235 (Ni-MH 3.0Ah) 2 2
w/o light
6319DWFE3 1235 (Ni-MH 3.0Ah) 3 3
6339D
Battery Battery cover
Model No. type Quantity Charger Flash light
(quantity)
6339DWAE 1422 (Ni-Cd 2.0Ah) 2 2
w/o light
6339DWAE3 1422 (Ni-Cd 2.0Ah) 3 3
6339DWALE 1422 (Ni-Cd 2.0Ah) 2 2 ML140
6339DWDE 1434 (Ni-MH 2.6Ah) 2 2
DC1414 w/o light
6339DWDE3 1434 (Ni-MH 2.6Ah) 3 3
6339DWDLE 1434 (Ni-MH 2.6Ah) 2 2 ML140
6339DWFE 1435 (Ni-MH 3.0Ah) 2 2
w/o light
6339DWFE3 1435 (Ni-MH 3.0Ah) 3 3
6349D
Battery Battery cover
Model No. type (quantity) Charger Flash light
Quantity
6349DWAE 1822 (Ni-Cd 2.0Ah) 2 2
w/o light
6349DWAE3 1822 (Ni-Cd 2.0Ah) 3 3
6349DWALE 1822 (Ni-Cd 2.0Ah) 2 2 ML180
6349DWDE 1834 (Ni-MH 2.6Ah 2 2
DC1804 w/o light
6349DWDE3 1834 (Ni-MH 2.6Ah) 3 3
6349DWDLE 1834 (Ni-MH 2.6Ah) 2 2 ML180
6349DWFE 1835 (Ni-MH 3.0Ah) 2 2
w/o light
6349DWFE3 1835 (Ni-MH 3.0Ah) 3 3
P 2 / 12
Specification
Model No. 6319D 6339D 6349D
Voltage: V 12V 14.4V 18V
Battery
2.0/ Ni-Cd 2.0/ Ni-Cd 2.0/ Ni-Cd
Capacity: Ah/ Cell 2.6/ Ni-MH 2.6/ Ni-MH 2.6/ Ni-MH
3.0/ Ni-MH 3.0/ Ni-MH 3.0/ Ni-MH
Max. out put: W 210 250 310
3rd (Heighest) 0 - 1,600 0 - 1,700
No load speed:
2nd (High) 0 - 550 0 - 600
min.-1=rpm
1st (Low) 0 - 300 0 - 300
Fastening torque: Hard joint 65 (47.9) 70 (51.6) 80 (59.0)
N.m (ft.lbs) Soft joint 31 (22.8) 32 (23.6) 40 (25.7)
Capacity: mm (") 1.5 -13 (1/16 - 1/2)
Drill chuck
Type Keyless, Single sleeve
Drilling capacity: Steel 13 (1/2) 13 (1/2) 13 (1/2)
mm (") Wood 45 (1-3/4) 50 (2) 65 (2-9/16 )
Electric brake Yes
Torque adjustment Yes
Variable speed control Yes
Reverse switch Yes
Net weight: kg (lbs)
2.2 (4.9) 2.3 (5.1) 2.6 (5.7)
[includes battery]
Standard equipment
(for all variations listed in page 1)
Philips bit 2-45 .................................. 2
Grip assembly .................................. 1
Battery cover ..................................... For quantity, see the variation list in page 1.
Note: The standard equipment for the tool shown above may differ from country to country.
Optional accessories
For all models For 6319D For 6339D For 6349D
*Assorted drill bits for Battery 1220 Battery 1420 Battery 1822
wood and steel Battery 1222 Battery 1422 Battery 1834
*Assorted driver bits Battery 1234 Battery 1434 Battery 1835
Battery 1235 Battery 1435 Battery 1835F
Battery 1235A Battery 1435F Charger DC1804
Battery 1235F Charger DC1414 Automotive Charger DC1822
Charger DC1414 Charger DC1439
Charger DC1439 Charger DC1804
Charger DC1804 Automotive Charger DC1422
Automotive Charger DC1422 Automotive Charger DC1822
Automotive Charger DC1822
P 3 / 12
Features and benefits
Mechanical 3-Speed Raised Logo of MXT
Provides high operation efficiency
(Metal eXtreme Technology)
Easy Operation Mode Change and a wide range of applications. This easy-to-remember nickname is
(See the graph below for details.) pad-printed, emphasizing extra-high
With merely one slide action, operation transmission durability ensured by
mode can be changed for drilling/fastening. all metal gear construction.
Single Sleeve Keyless Chuck
Powerful Motor for High
Allows fast and easy one-hand Operation Efficiency
bit installation.
Although using the same ND31
motor as 6347D series models,
higher power has been achieved
Robust Aluminum Gear Housing by employment of rare earth
magnet.
Rubberized Soft Grip
Provides comfortable operation
Side Grip of New design with better control.
For heavy duty applications
Compact Design with an Overall Length
of Only 246mm (9-11/16")
6mm (5/16") smaller than the competitor A's series models.
Note: Set plate type batteries are not available.
Mechanical 3 speed for more efficiency and a wider range of applications.
(min.-1)
6319D* *Model 6319D
6339D 3rd = 1,600 min-1
2,000 2nd = 550 min-1
6349D
1st = 300 min-1
6343D 3rd speed (highest speed):
Rotational speed
Series 1,700 Optimum for faster drilling in light duty applications
1,500
1,400
1,000
2nd speed (high speed):
600 Optimum for more efficient drilling in heavy duty applications
500
1st speed (low speed)
450 For heavy duty applications; for example, able to drill through holes in
300
38mm thick SPF with 3" Selfeed bit while impossible with the rival
model of the competitor A and Makita 6347D.
0
P 4 / 12
Comparison of products
[1] Specification Comparison
1) Main Specifications
Model No. Makita A B
Specifications 6319D 6216D/ 6316D 6217D/ 6317D A1 B1
Capacity: Ah 2.6/ 3.0 2.6/ 3.0 2.6 (1.7) 2.4
Battery
Cell Ni-MH Ni-MH Ni-MH Ni-Cd Ni-Cd
3rd 0- 1,600 0- 1,800
No load speed:
min.-1=rpm 2nd/ High 0- 550 0- 1,300 0- 1,300 0 - 1,400 0 - 1,400
1st/ Low 0- 300 0- 400 0- 400 0 - 450 0 - 400
Locking torque (USA): in.lbs 400 320 310 350 N/A
Hard joint 65 35 60 (59) 65
12V
Max fastening
torque: N.m Soft joint 31 18 25 (24) 26
Capacity: mm (") 13 (1/2) 10 (3/8) / 13 (1/2) 10 (3/8)/ 13 (1/2) 13 (1/2) 13 (1/2)
Keyless chuck
Sleeve type Single Dual Dual Single Single
Drilling capacity: Steel 13 (1/2) 10 (3/8) / 13 (1/2) 10 (3/8)/ 13 (1/2) 13 (1/2) 13 (1/2)
mm (") Wood 45 (1-3/4) 30 (1-3/16) 25.4 (1) 38 (1-1/2) 32 (1-1/4)
Length 246 (9-11/16) a) 255 (10) a) 243 (9-9/16) 252 (9-7/8) 256 (10-1/8)
Dimensions: mm (") Width 94 (3-11/16) 94 (3-11/16) 94 (3-11/16) 76 (3) 84 (3-5/16)
Height 243 (9-9/16) 240 (9-1/2) 243 (9-9/16) 241 (9-1/2) 260 (10-1/4)
Net weight: kg (lbs) Catalog 2.2 (4.9) b) 2.2 (4.9) b) 2.0 (4.4) 2.2 (4.9) 2.2 (4.9)
[includes battery] Measured 2.27 (5.0) b) 2.19 (4.8) b) 2.12 (4.7) 2.25 (5.0) N/A
a) The length when 13mm (1/2") drill chuck is attached
b) The net weight when 13mm (1/2") drill chuck is attached
Model No. Makita A B
Specifications 6339D 6236D/ 6336D 6237D/ 6337D A2 B2
Capacity: Ah 2.6/ 3.0 2.6/ 3.0 2.6 (1.7) 2.4
Battery
Cell Ni-MH Ni-MH Ni-MH Ni-Cd Ni-Cd
3rd 0 - 1,700 0 - 1,800
No load speed:
min.-1=rpm 2nd/ High 0 - 600 0 - 1,300 0 - 1,300 0 - 1,400 0 - 1,400
1st/ Low 0 - 300 0 - 400 0 - 400 0 - 450 0 - 400
Locking torque (USA): in.lbs 450 358 350 400 N/A
Max fastening Hard joint 70 40 65 (63) 70
14.4V
torque: N.m Soft joint 32 21 30 (28) 30
Capacity: mm (") 13 (1/2) 10 (3/8)/ 13 (1/2) 10 (3/8)/ 13 (1/2) 13 (1/2) 13 (1/2)
Keyless chuck
Sleeve type Single Dual Dual Single Single
Drilling capacity: Steel 13 (1/2) 10 (3/8)/ 13 (1/2) 10 (3/8)/ 13 (1/2) 13 (1/2) 13 (1/2)
mm (") Wood 50 (2) 36 (1-7/16) 32 (1-1/4) 44 (1-3/4) 35 (1-3/8)
Length 246 (9-11/16) a) 255 (10) a) 243 (9-9/16) 252 (9-7/8) 256 (10-1/8)
Dimensions: mm (") Width 94 (3-11/16) 94 (3-11/16) 94 (3-11/16) 76 (3) 84 (3-5/16)
Height 247 (9-3/4) 244 (9-5/8) 247 (9-3/4) 241 (9-1/2) 260 (10-1/4)
Net weight: kg (lbs) Catalog 2.3 (5.1) b) 2.3 (5.1) b) 2.1 (4.6) 2.4 (5.2) 2.4 (5.3)
[includes battery] Measured 2.44 (5.4) b) 2.32 (5.1) b) 2.23 (4.9) 2.41 (5.3) N/A
a) The length when 13mm (1/2") drill chuck is attached.
b) The net weight when 13mm (1/2") drill chuck is attached
P 5 / 12
Comparison of products
[1] Specification Comparison (cont.)
1) Main Specifications
Model No. Makita A B
Specifications 6349D 6343D 6347D A3 B3
Capacity: Ah 2.6/ 3.0 2.6/ 3.0 2.6 (2.4) 2.0
Battery
Cell Ni-MH Ni-MH Ni-MH Ni-Cd Ni-Cd
3rd 0 - 1,700 0 - 2,000
No load speed:
min.-1=rpm 2nd/ High 0 - 600 0 - 1,400 0 - 1,300 0 - 1,450 0 - 1,300
1st/ Low 0 - 300 0 - 450 0 - 400 0 - 450 0 - 400
Locking torque (USA): in.lbs 560 404 400 450 N/A
Hard joint 80 50 80 (76) 80
18V
Max fastening
torque: N.m Soft joint 40 25 35 (33) 38
Capacity: mm (") 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2)
Keyless chuck
Sleeve type Single Dual Dual Single Single
Drilling capacity: Steel 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2) 13 (1/2)
mm (") Wood 65 (2-9/16) 38 (1-1/2) 38 (1-1/2) 51 (2) 38 (1-1/2)
Length 246 (9-11/16) 255 (10) 243 (9-9/16) 252 (9-7/8) 256 (9-7/8)
Dimensions: mm (") Width 95 (3-3/4) 95 (3-3/4) 95 (3-3/4) 90 (3-1/2) --
Height 252 (9-7/8) 249 (9-3/4) 251 (9-7/8) 241 (9-1/2) 260 (10-1/4)
Net weight: kg (lbs) Catalog 2.6 (5.7) 2.5 (5.5) 2.4 (5.3) 2.7 (6.0) 2.5 (5.5)
[includes battery] Measured 2.6 7(5.9) 2.65 (5.8) 2.42 (5.3) 2.72 (6.0) N/A
2) Other Specifications
12V models 6319D 6216D /6316D 6217D /6317D A1 B1
14.4V models 6339D 6236D /6336D 6237D /6337D A2 B2
12V/ 14.4V/ 18V
18V models 6349D 6343D 6347D A3 B3
Metal gear housing Yes Yes No Yes No
Externally accessible brush Yes Yes Yes No Yes
Side grip Yes Yes (only 6343D) No Yes (only DW987) No
Soft grip Yes No Yes Yes Yes
Holders for storing bit 2 2 2 2 1
Torque adjustment 16stages+ drill 16stages+ drill 16stages+ drill 22stages+ drill 15stages+ drill
P 6 / 12
Comparison of product
[2] Performance Comparison
Note: 1. With 2.6Ah Ni-MH battery, Makita models were tested.
2. The test results depend to a great extent on the hardness of materials, etc.
3. The numbers in the bar graphs are relative values when the capacity of the predecessor model
(6317D/6337D/6347D) is indexed at 100.
4. The 3rd speed of the new models is designed for faster drilling/fastening with rotational speed higher
than that of the predecessor models. Therefore, in some applications, the energy consumption may
get higher, resulting in work volume smaller than the predecessor models.
12V 6319D
1) DRILLING IN WOOD
Test Conditions: Drilled holes through 38mm (1-1/2") spruce fir with dia. 22mm (7/8") spade bit.
[Work speed] [Work Volume]
(the time required to drill a through hole) (on a single full battery charge)
Slow Fast Few Many
Makita 6319D 135 6.1 sec. 95 35 holes
(3rd speed)
Competitor A Mod. A1 125 45
(3rd speed)
Competitor B Mod. B1
130 95
(High speed)
Makita 6316D 120 100
(High speed)
Makita 6317D 100 100
(High speed)
0 50 100 150 0 50 100 150
2) FASTENING
Test Conditions: Drove dia. 10mm (3/8") lag bolts in 38mm (1-1/2") spruce fir.
[Work speed] [Work Volume]
(the time required to drive a lag bolt) (on a single full battery charge)
Slow Fast Few Many
Makita 6319D 105 5.2 sec. 90
(2nd speed)
Makita 6319D 85
(1st speed) 110 40 bolts
Competitor A Mod. A1 105 45
(1st speed)
Competitor B Mod. B1 95
(Low speed) 100
Makita 6316D
(Low speed) 95 90
Makita 6317D
(Low speed) 100 100
0 50 100 150 0 50 100 150
P 7 / 12
Comparison of product
[2] Performance Comparison (cont.)
14.4V 6339D
1) DRILLING IN WOOD
Test Conditions: Drilled holes through 38mm (1-1/2") spruce fir with dia. 22mm (7/8") spade bit.
[Work speed] [Work Volume]
(the time required to drill a through hole) (on a single full battery charge)
Slow Fast Few Many
Makita 6339D 130 4.0sec. 80 40 holes
(3rd speed)
Competitor A Mod. A2
(3rd speed) 120 40
Competitor B Mod. B2 80
130
(High speed)
Makita 6336D 110 85
(High speed)
Makita 6337D 100 100
(High speed)
0 50 100 150 0 50 100 150
2) FASTENING
Test Conditions: Drove dia. 10mm (3/8") lag bolts in 38mm (1-1/2") spruce fir.
[Work speed] [Work Volume]
(the time required to drive a lag bolt) (on a single full battery charge)
Slow Fast Few Many
Makita 6339D 130 4.3 sec. 75
(2nd speed)
Makita 6339D 95 90 68 bolts
(1st speed)
Competitor A Mod. A2
(1st speed) 100 55
Competitor B Mod. B2
(Low speed) 120 95
Makita 6336D
(Low speed) 100 80
Makita 6337D
(Low speed) 100 100
0 50 100 150 0 50 100 150
P 8 / 12
Comparison of product
[2] Performance Comparison (cont.)
18V 6349D
1) DRILLING IN WOOD
Test Conditions: Drilled holes through 38mm (1-1/2") spruce fir with dia. 22mm (7/8") spade bit.
[Work speed] [Work Volume]
(the time required to drill a through hole) (on a single full battery charge)
Slow Fast Few Many
Makita 6349D 120 3.0 sec. 90 68 holes
(3rd speed)
Competitor A Mod. A3
(3rd speed) 120 85
Competitor B Mod. B3
125 60
(High speed)
Makita 6343D 100 100
(High speed)
Makita 6347D 100 100
(High speed)
0 50 100 150 0 50 100 150
2) FASTENING
Test Conditions: Drove dia. 10mm (3/8") lag bolts in 38mm (1-1/2") spruce fir.
[Work speed] [Work Volume]
(the time required to drive a lag bolt) (on a single full battery charge)
Slow Fast Few Many
Makita 6349D 115 4.1 sec. 90
(2nd speed)
Makita 6349D 85 105 96 bolts
(1st speed)
Competitor A Mod. A3
(1st speed) 110 100
Competitor B Mod. B3
(Low speed) 110 90
Makita 6343D
(Low speed) 105 105
Makita 6347D
(Low speed) 100 100
0 50 100 150 0 50 100 150
P 9 / 12
Comparison of product
[2] Performance Comparison (cont.)
18V 6349D
3) HEAVY-DUTY APPLICATION
drilled holes through 38mm (1-1/2") spruce fir with dia. 3" Selfeed bit.
DRILLING
Test Conditions: Drilled holes through 38mm (1-1/2") spruce fir with dia. 3" Selfeed bit.
[Work Volume]
(on a single full battery charge)
Few Many
Makita 6349D 19 holes
(1st speed)
Competitor A Mod. A3
(1st speed) 5 holes, then the motor was burned out.
Competitor B Mod. B3
(Low speed) 3 holes, then the motor was burned out.
Makita 6347D Not applicable
(Low speed)
0 5 10 15 20
FASTENING
Test Conditions: Drove dia. 10x400 mm coarse thread screws.
[Work Volume]
(on a single full battery charge)
Few Many
Makita 6349D 9 screws
(1st speed)
Competitor A Mod. A3 4 screws, then the motor
(1st speed) was burned out.
Competitor B Mod. B3
(Low speed) 2 screws, then the motor was burned out.
Makita 6347D Not applicable
(Low speed)
0 5 10
P 10/ 12
Repair
[1] DISASSEMBLY/ ASSEMBLY
[1] -1. Drill Chuck
REMOVAL
When replacing Gear assembly, remove Drill chuck first as described below.
(When replacing only Housing, you need not remove Drill chuck.)
1) After opening the chuck jaws to the full, remove the chuck screw (M6x22 (-) Flat head screw) by turning it clockwise.
Use impact driver drill if it is difficult to remove the screw.
2) Slide Speed change lever to the position of "1" (1st speed), and slide Action mode change lever to the drill mode
as illustrated in Fig. 1.
Secure the short arm of a hex wrench with the chuck jaws. Hold the machine firmly, and then remove Drill chuck
by hitting the long arm of the hex wrench using plastic hammer to turn Drill chuck counterclockwise. (Fig. 2)
Fig. 1 Fig. 2
Action mode Hex wrench
change lever
Speed change lever
Note: Fig. 3
This product has "Spindle Lock system".
After hex wrench is secured in Drill chuck, it is impossible to turn the wrench [WRONG]
in order to adjust the position of its long arm. (Fig. 3)
Therefore, make sure that the hex wrench is positioned as illustrated in Fig. 2
before securing it in drill chuck.
Caution:
Place the tool on a work table so that Drill chuck touches the surface of the work table as illustrated to left in Fig. 4.
Failure to follow this instruction can result in deformation of Spindle.
Fig. 4
[CORRECT] [WRONG]
Spindle can be deformed by the shock to
Drill chuck hex wrench.
Work table Hex wrench
P 11/ 12
Repair
[1] -1. Drill Chuck (cont.)
INSTALLATION
1) Make sure that Flat washer 13 is mounted to Spindle before installing Drill chuck. (Fig. 5)
2) Slide Speed change lever to the position of "1" (1st speed), and slide Action mode change lever to the drill mode as
illustrated in Fig. 1. Push in F/R change lever for the forward rotation mode. (Fig. 6)
Secure the short arm of a hex wrench in the chuck jaws, and the long arm in vise. Hold the grip of the machine firmly
so that your hand cannot be pulled away by reaction torque. And then tighten Spindle into Drill chuck by pulling the
trigger of Switch until Spindle is locked. (Fig. 6)
Note: Release the trigger of Switch just after Spindle is locked. Do not keep on pulling the trigger for longer than
one second.
3) Fasten Drill chuck to Spindle with the chuck screw (M6x22 (-) Flat head screw) by turning it counterclockwise.
If you reuse a screw removed from Drill chuck, apply an appropriate amount of adhesive (ThreeBond 1321B/ 1342 or
Loctite 242) to the screw for secure fastening.
Fig. 5 Fig. 6
Hex wrench
Flat washer 13
Push in R/F
change lever
for the forward
rotation mode.
[1] -2. Installing Speed Change Lever
1) Before installing Speed change lever on Gear assembly, make sure that;
a. Two Leaf springs are installed to Speed change lever as illustrated to left in Fig. 7.
b. Two compression springs are installed to speed change lever as illustrated to right in Fig. 7.
2) Assemble Speed change lever to the projection on Gear assembly. (Fig. 8)
Fig. 7 Fig. 8
Change lever
Leaf spring
Projection for
Change lever speed change lever
installation
Compression spring
Gear assembly
P 12/ 12
Circuit diagram
Color index of lead wires' sheath
Black
Red
Endbell complete
Receptacle
Switch
Holder
Spring terminal
Wiring diagram
Route lead wires
between rib B
and the inside wall
of Housing.
Rib B
Rib A
Route the connect lead wires
(red and black) of endbell complete Boss A
between rib A and boss A.
Do not put the lead wire (red)
on the boss A.