Text preview for : 2LW-016.pdf part of Kyocera 2LW-016 Kyocera Printer FS-3040-3140MFP SERVICEBULLETIN 2LW-016.pdf
Back to : 2LW-016.pdf | Home
Service Bulletin
SB Number: SB 2LW-016 Creation Date: 02/02/2012
Subject: Failure to install the Main charger unit at the Drum unit frame
Model: FS-3040MFP/3140MFP/3040MFP+/3140MFP+/3540MFP/3640MFP
Phenomenon The Service parts Main charger unit can not be installed at the Drum unit frame.
Cause The Hook of the Main charger unit may be deformed due to pressure in the Vacuum pack of
the Packing material.
Solution The Packing material has been changed as follows:
1. A part of the Cardboard has been removed.
2. A Spacer has been added to the inner side of the hook
Regular condition Deformed hook
Part of the Cardboard has been removed Spacer has been added to the inner side of the hook
KMIS Service Department, Kyocera Mita Europe Page 1 of 2 B425 / SB 2LW-016
Service Bulletin
Classification Entire stock rework X In-field modification by case No modification necessary
In-field modification at next visit
Field measure When the above mentioned phenomenon occurs, please replace the Main charger unit with the
latest type.
Parts
No. Old Parts New Parts Description Q'TY Interchange-
No. No. ability
Old New Old New
1 302J093092 302J093093 MC-320 1 1 X O
2J093092 2J093093
KMIS Service Department, Kyocera Mita Europe Page 2 of 2 B425 / SB 2LW-016