Text preview for : NSXSZ 70-72-73 Rev.pdf part of Aiwa Hi-Fi NSX-SZ70, NSX-SZ72, NSX-SZ73 CD Stereo Tape Receiver - Tape mech. 2ZM-3MK2 PR4NM, CD mech. AZG-1 ZD3RDM - (11.473Kb) pag. 37
Back to : 707273.part1.rar | Home
NSX-SZ70 NSX-SZ72 NSX-SZ73
EZ,K EZ EZ
SERVICE MANUAL
COMPACT DISC STEREO CASSETTE RECEIVER BASIC TAPE MECHANISM: 2ZM-3MK2 PR4NM BASIC CD MECHANISM: AZG-1 ZD3RDM SYSTEM NSX-SZ70 NSX-SZ72 NSX-SZ73 CD-CASSEIVER SPEAKER SX-WNSZ70 CX-NSZ70 SX-WNSZ71 CX-NSZ72 SX-WNH81 CX-NSZ73 REMOTE CONTROLLER RC-ZAS01
· This Service Manual is the "Revision Publishing" and replaces "Simple Manual" NSX-SZ70/SZ72/SZ73 (S/M Code No. 09-002-425-3T3). · If requiring information about the CD mechanisim, see Service Manual of AZG-1 (S/M Code No. 09-001-335-3N8).
S/M Code No. 09-006-425-3R3
RE VI SIO DA N TA
SPECIFICATIONS
Tuning range Usable sensitivity(IHF) Antenna terminals Tuning range Usable sensitivity Antenna Tuning range Usable sensitivity Antenna 87.5 MHz to 108 MHz 13.2 dBf 75 ohms (unbalanced) Laser Semiconductor laser ( =780 nm) D-A converter 1 bit dual Signal-to-noise ratio 85 dB (1 kHz, 0 dB) Harmonic distortion 0.05 % (1 kHz, 0 dB) Wow and flutter Unmeasurable (NSX-SZ70/NSX-SZ72) Speaker system 3 way, Built-in subwoofer(magnetic shielded type Speaker units Subwoofer : 160 mm cone type Full range: 100 mm cone type Super Tweeter : 20 mm ceramic type Impedance 6 ohms / 8 ohms Sensitivity 87 dB/W/m Dimensions (W x H x D) 240 x 324 x 281 mm Weight 5.0 kg, 5.2 kg (NSX-SZ73) Speaker system 3 way, Built-in subwoofer(magnetic shielded type Speaker units Subwoofer : 200 mm cone type Full range: 120 mm cone type Super Tweeter : 20 mm ceramic type Impedance 6 ohms / 8 ohms Sensitivity 87 dB/W/m Dimensions (W x H x D) 240 x 324 x 285 mm Weight 5.7 kg
531 kHz to 1602 kHz (9 kHz step) 530 kHz to 1710 kHz (10 kHz step) 350 uV/m Loop antenna
144 kHz to 290 kHz 1400 uV/m Loop antenna
Mid-high frequency amplifier Power output Rated: 25 W + 25 W (8 ohms, T.H.D. 1 %,1 kHz/DIN 45500) Reference: 30 W + 30 W (8 ohms, T.H.D. 10 %,1 kHz/DIN 45324) DIN MUSIC POWER: 60 W + 60 W Total harmonic distortion 0.1 % (10 W, 1 kHz, 8 ohms, DIN AUDIO) Low frequency amplifier Power output Rated: 75 W + 75 W (6 ohms, T.H.D. 1 %, 130 Hz/DIN 45500) Reference: 90 W + 90 W (6 ohms, T.H.D. 10 %,130 Hz/DIN 45324) DIN MUSIC POWER: 170 W + 170 W Total harmonic distortion 0.1 % (35 W,130 Hz,6 ohms, DIN AUDIO) Inputs VIDEO/AUX : 316 mV (adjustable) MD: 316 mV (adjustable) MIC: 1.8 mV (10 kohms)<70EZ,K> MIC1, MIC2: 1 mV (10 kohms) Outputs SPEAKERS HIGH FREQ : accept speakers of 8 ohms or more SPEAKERS LOW FREQ : accept speakers of 6 ohms or more SURROUND SPEAKERS : accept speakers of 8 to 16 ohms LINE OUT: 210 mV PHONES (stereo jack) : accepts headphones of 32 ohms or more Track format Frequency response Signal-to-noise ratio Recording system Heads
Power requirements Power consumption Power consumption in standby mode
Dimensions (W x H x D) Weight
230 V AC, 50 Hz 170W, 175 W If the power-economizing mode is ECO OFF: 24 W, 26 W If the power-economizing mode is ECO ON or ECO AUTO: 0.9 W 260 x 330 x 360mm 8.9 kg
· Design and specifications are subject to change without notice. · Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. "DOLBY" and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. · The word "BBE"and the "BBE symbol" are trademarks of BBE Sound, Inc. Under license from BBE Sound,Inc.
4 tracks, 2 channels stereo CrO2 tape: 50 Hz 16000 Hz Normal tape: 50 Hz 15000 Hz 60 dB (Dolby B NR ON, CrO2 tape peak level) AC bias Deck 1: Playback head x 1 Deck 2: Recording/Playback head x 1, erase head x 1
-2-
PROTECTION OF EYES FROM LASER BEAM DURING SERVICING
This set employs laser. Therefore, be sure to follow carefully the instructions below when servicing.
CAUTION
Use of controls or adjustments or performance of procedures other than those specified herin may result in hazardous radiation exposure.
WARNING!!
WHEN SERVICING, DO NOT APPROACH THE LASER EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO CONFIRM LASER BEAM EMISSION. BE SURE TO OBSERVE FROM A DISTANCE OF MORE THAN 30cm FROM THE SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
s Caution: Invisible laser radiation when open and interlocks defeated avoid exposure to beam. Advarsel: Usynlig laserståling ved åbning, når sikkerhedsafbrydere er ude af funktion. Undgå udsættelse for stråling.
ATTENTION
L'utillisation de commandes, réglages ou procédures autres que ceux spécifiés peut entraîner une dangereuse exposition aux radiations.
ADVARSEL
Usynlig laserståling ved åbning, når sikkerhedsafbrydereer ude af funktion. Undgå udsættelse for stråling. This Compact Disc player is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT label is located on the rear exterior.
s
VAROITUS!
Laiteen Käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saataa altistaa käyt-täjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. VARNING! Om apparaten används på annat sätt än vad som specificeras i denna bruksanvising, kan användaren utsättas för osynling laserstrålning, som överskrider gränsen för laserklass 1.
CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1
LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT
Precaution to replace Optical block
(KSS-213F)
Body or clothes electrostatic potential could ruin laser diode in the optical block. Be sure ground body and workbench, and use care the clothes do not touch the diode.
PICK-UP Assy P.C.B
1) After the connection, remove solder shown in right figure. Solder
-3-
NOTE ON BEFORE STARTING REPAIR
1. Forced discharge of electrolytic capacitor of power supply block
When repair is going to be attempted in the set that uses relay circuit in the power supply block, electric potential is kept charged across the electrolytic capacitors (C101, 102) even though AC power cord is removed. If repair is attempted in this condition, secondary defect can occur. In order to prevent the secondary trouble, perform the following measures before starting repair work.
Discharge procedure
1 Remove the AC power cord. 2 Connect a discharging resistor at an end of lead wire that has clips at both ends. Connect the other end of the lead wire to metal chassis. 3 Contact the other end of the discharging resistor to the positive (+) side (+VH) of C101. (For two seconds) 4 Contact the same end of the discharging resistor as step 3 to the negative (-) side (-VH) of C102 in the same way. (For two seconds) 5 Check that voltage across C101 and C102 has decreased to 1 V or less using a multimeter or an oscilloscope.
MAIN C.B D101
3
C101
C102
4
2
2
Select a discharging resistor referring to the following table. Charging voltage (V) (C101, 102) 25-48 49-140 Discharging resistor () 100 220 Rated power (W) 3 5 Parts number 87-A00-247-090 87-A00-232-090
Fig-1
Note: The reference numbers (C101, C102) of the electrolytic capacitors can change depending on the models. Be sure to check the reference numbers of the charging capacitors on schematic diagram before starting the discharging work.
2. Check items before exchanging the MICROCOMPUTER
Be sure to check the following items before exchanging the MICROCOMPUTER. Exchange the MICROCOMPUTER after confirming that the MICROCOMPUTER is surely defective.
2-1. Regarding the HOLD terminal of the MICROCOMPUTER
When the HOLD terminal (INPUT) of the MICROCOMPUTER is "H", the MICROCOMPUTER is judged to be operating correctly. When this terminal is "L", the main power cannot be turned on. Therefore, be sure to check the terminal voltage of the HOLD terminal before exchange. When the MICROCOMPUTER is not defective, the HOLD terminal can also go "L" when the POWER AMPLIFIER has any abnormalities that triggers the abnormality detection circuit on the MAIN C. B. that sets the HOLD terminal to "L".
· Good or no good judgement of the MICROCOMPUTER
1 Turn on the AC main power. 2 Confirm that the main power is turned on and the HOLD terminal of the MICROCOMPUTER keeps the "H" level or not. 3 When the HOLD terminal is "L" level, the abnormality detection circuit is judged to be working correctly and the MICROCOMPUTER is judged to be good.
-4-
In such a case, check also if the POWER AMPLIFIER circuit or power supply circuit has any abnormalities or not.
2-2. Regarding reset
There are cases that the machine does not work correctly because the MICROCOMPUTER is not reset even though the AC power cord is re-inserted, or the software reset (pressing the STOP key + POWER key) is performed. When the above described phenomenon occurs, it can lead to wrong judgement as if the MICROCOMPUTER is defective and to exchange the MICROCOMPUTER. In such a case, perform the forced-reset by the following procedure and check good or no good of the MICROCOMPUTER. 1 Remove the AC power cord.
TE R
RO
CO
M
PU
FRONT C.B % VSS MICROC113 COMPUTER * VDD
M
18 15
IC
C113 FRONT C.B
Short with tweezers.
Fig-2-2
2 Short both ends of the electrolytic capacitor C113 that is connected to VDD of the MICROCOMPUTER with tweezers. 3 Connect the AC power cord again. If the MICROCOMPUTER returns to the normal operation, the MICROCOMPUTER is good. Note: The reference number or MICROCOMPUTER pin number of transistor (Q110) and electrolytic capacitor (C113) can change depending on the models. Be sure to check the reference numbers on schematic diagram before starting the discharging work.
2-3. Confirmation of soldering state of MICROCOMPUTER
Check the soldering state of the MICROCOMPUTER in addition to the above described procedures. Be sure to exchange the MICROCOMPUTER after surely confirming that the trouble is not caused by poor soldering but the MICROCOMPUTER itself.
-5-
ELETRICAL MAIN PARTS LIST
REF. NO. IC
PART NO.
KANRI NO.
DESCRIPTION
REF. NO. C21 C22 C25 C26 C27 C28 C31 C32 C34 C35 C36 C38 C39 C40 C60 C80 C81 C82 C104 C105 C111 C112 C113 C114 C115 C116 C121 C122 C161 C162 C171 C172 C173 C174 C175 C176 C177 C178 C301 C302 C303 C304 C305 C306 C307 C311 C312 C313 C314 C315 C316 C317 C318 C319 C320 C321 C322 C324 C325 C327 C328 C332 C335 C336 C337 C339 C340 C351 C352 C354
PART NO.
8A-NF6-610-010 8A-NF6-605-010 8A-NF6-605-130 87-A21-398-010 87-A21-396-010 87-A21-482-010 87-A20-783-040 87-A21-577-040 87-A21-021-040 87-070-289-040 87-A21-452-040 87-A21-560-010 87-070-127-110 87-A20-355-010 87-A21-018-040 87-A20-440-040 87-020-454-010 TRANSISTOR 87-026-245-080 87-026-609-080 87-A30-198-080 87-026-610-080 87-A30-076-080 87-A30-075-080 87-A30-318-080 89-213-702-010 87-A30-087-080 87-A30-107-070 87-A30-073-080 87-A30-074-080 87-A30-269-040 87-A30-106-070 87-A30-105-080 87-A30-086-040 87-A30-329-080 89-327-143-080 87-A30-072-080 87-A30-234-080 87-A30-086-070 89-503-602-080 87-026-463-080 DIODE 87-A40-548-090 87-017-654-060 87-A40-547-090 87-020-465-080 87-A40-553-080 87-A40-781-080 87-A40-764-080 87-A40-313-080 87-A40-270-080 87-A40-269-080 87-A40-768-080 87-A40-752-080 87-A40-802-080 87-017-978-080 87-A40-745-080 87-A40-748-080 87-017-149-080 MAIN C.B C3 C4 87-012-368-080 87-012-368-080
C-IC,LC876564V-5P35<70EZ,K> C-IC,LC876572V-5P63<73EZ> C-IC,LC876572V5P63<72EZ> IC,STK490-110 IC,STK490-040 IC,RPM6938-H4 C-IC,BA7762AFS C-IC,M61506FP C-IC,BU2099FV IC,BU 2092F C-IC,BD3876KS2 IC,LA1844L-A IC,LC72131 D IC,CXA1553P C-IC,M65849BFP631D<73EZ> C-IC,BU1920FS<73EZ> IC,DN6851
KANRI NO. 87-016-658-000 87-016-658-000 87-010-406-080 87-010-406-080 87-010-406-080
DESCRIPTION CAP,E 4700-35 M SMG CAP,E 4700-35 M SMG CAP, ELECT 22-25V CAP, ELECT 22-25V CAP, ELECT 22-25V CAP, CAP, CAP, CAP, CAP, CAP, CAP, CAP, CAP, CAP, CAP, CAP, CAP, CHIP CHIP CAP, CAP, CAP, CAP, CAP, ELECT 22-25V ELECT 100-10V CHIP 0.01 DM ELECT 100-25V ELECT 22-50V ELECT 330-16V ELECT 220-35V ELECT 220-35V CHIP 0.01 DM ELECT 3.3-50V ELECT 1-50V ELECT 47-25V ELECT 47-25V CAPACITOR,0.1-25 CAPACITOR,0.1-25 ELECT ELECT ELECT ELECT ELECT 0.22-50V 0.22-50V 0.22-50V 0.22-50V 0.33-50V
87-010-406-080 87-010-263-080 87-010-197-080 87-010-384-080 87-010-406-080 87-010-381-080 87-010-394-080 87-010-394-080 87-010-197-080 87-010-403-080 87-010-401-080 87-010-260-080 87-010-260-080 87-010-196-080 87-010-196-080 87-010-545-080 87-010-545-080 87-010-545-080 87-010-545-080 87-010-546-080 87-010-546-080 87-010-545-080 87-010-545-080 87-010-176-080 87-010-176-080 87-012-368-080 87-012-368-080 87-012-368-080 87-012-368-080 87-010-191-080 87-010-191-080 87-010-197-080 87-010-197-080 87-010-318-080 87-010-318-080 87-012-157-080 87-012-157-080 87-012-157-080 87-012-157-080 87-010-196-080 87-010-198-080 87-010-198-080 87-010-181-080 87-010-181-080 87-010-179-080 87-010-179-080 87-A10-201-080 87-A10-201-080 87-012-141-080 87-012-141-080 87-012-141-080 87-012-141-080 87-010-260-080 87-010-370-080 87-010-404-080 87-010-404-080 87-010-196-080 87-010-401-080 87-010-401-080 87-010-196-080 87-010-196-080 87-010-196-080 87-012-140-080 87-012-140-080 87-010-175-080
TR,DTC114ES TR,KTA1266GR TR,KTC3199GR TR,KTC3198GR C-TR,2SC3052F C-TR,2SA1235F TR,CSA952K TR,2SB1370 (1.8W) C-FET,2SK2158 C-TR,CMBT5401 C-TR,RT1N 141C C-TR,RT1P 141C C-FET,2SJ461-T1 C-TR,CMBT5551 C-TR,RT1P 441C C-TR,CSD1306E TR,CD1585BC TR,2SC2714 (0.1W) C-TR,RT1P 144C TR,CSC4115BC C-TR,CSD1306E C-TR,2SK360E TR,2SA933SRS
CAP, ELECT 0.33-50V CAP, ELECT 0.22-50V CAP, ELECT 0.22-50V C-CAP,S 680P-50 J SL C-CAP,S 680P-50 J SL C-CAP,S C-CAP,S C-CAP,S C-CAP,S C-CAP,S C-CAP,S C-CAP,S C-CAP,S C-CAP,S C-CAP,S 0.1-50 F 0.1-50 F 0.1-50 F 0.1-50 F 0.015-50 Z F GRM 0.015-50 Z F GRM 0.01-25 K B C2012 0.01-25 K B C2012 47P-50 CH 47P-50 CH
C-CAP,S 330P-50 CH C-CAP,S 330P-50 CH C-CAP,S 330P-50 CH C-CAP,S 330P-50 CH CHIP CAPACITOR,0.1-25 CAP, CHIP 0.022 CAP, CHIP 0.022 CAP,CHIP S B1800P CAP,CHIP S B1800P CAP,CHIP S B1200P CAP,CHIP S B1200P C-CAP,S 0.33-16 K C-CAP,S 0.33-16 K C-CAP,S 0.22-16 Z C-CAP,S 0.22-16 Z B B F C2012 F C2012
DIODE,D3SBA20 DIODE,GBU6J DIODE,D5SBA20 DIODE,1SS133 DIODE,1N4003 LES ZENER,UZ36BSA ZENER,UZ10BSC C-DIODE,MC 2840 C-DIODE,MC2838 C-DIODE,MC2836 ZENER,UZ16BSA ZENER,UZ6.2BSC ZENER,UZ5.1BSC DIODE,1N4003 ZENER,UZ4.7BSA ZENER,UZ5.6BSA ZENER,HZS6A2L
C-CAP,S 0.22-16 Z F C2012 C-CAP,S 0.22-16 Z F C2012 CAP, ELECT 47-25V CAP,E 330-6.3 SME CAP, ELECT 4.7-50V CAP, CHIP CAP, CAP, CHIP ELECT 4.7-50V CAPACITOR,0.1-25 ELECT 1-50V ELECT 1-50V CAPACITOR,0.1-25
C-CAP,S 0.1-50 F C-CAP,S 0.1-50 F
CHIP CAPACITOR,0.1-25 CHIP CAPACITOR,0.1-25 CAP 470P CAP 470P CAP 560P
-6-
REF. NO. C355 C356 C357 C358 C359 C360 C363 C370 C371 C372 C373 C374 C375 C376 C378 C381 C382 C383 C384 C385 C386 C388 C391 C392 C393 C394 C501 C502 C503 C504 C505 C506 C507 C508 C509 C510 C511 C512 C513 C514 C515 C516 C517 C518 C531 C532 C533 C534 C535 C536 C538 C541 C609 C610 C611 C612 C613 C614 C616 C617 C618 C619 C620 C621 C623 C624 C626 C627 C628 C629
PART NO.
KANRI NO. 87-010-178-080 87-010-260-080 87-010-197-080 87-010-183-080 87-010-183-080
DESCRIPTION CHIP CAP 1000P CAP, ELECT 47-25V CAP, CHIP 0.01 DM C-CAP,S 2700P-50 B C-CAP,S 2700P-50 B C-CAP,S 2700P-50 B CAP,M 5600P-50 J CHIP CAPACITOR,0.1-25 C-CAP,S 560P-50 J SL C-CAP,S 560P-50 J SL C-CAP,S 1200P-50 K B GRM C-CAP,S 1200P-50 K B GRM CAP,E 0.22-50 M 11L SME CAP,E 0.22-50 M 11L SME CHIP CAPACITOR,0.1-25 CAP, CHIP 0.01 DM C-CAP,S 47P-50 J CH GRM CAP, CHIP 0.01 DM CAP, ELECT 2.2-50V C-CAP,S 3300P-50 K B C2012 CHIP CAPACITOR,0.1-25 C-CAP,S 220P-50 CH C-CAP,S 56P-50 CH C-CAP,S 56P-50 CH C-CAP,S 56P-50 CH C-CAP,S 56P-50 CH CAP,E 100-10 M 11L SME<72,73EZ> C-CAP,S 0.1-25 Z F C2012<72,73EZ> C-CAP,S 0.22-16 K W5R<72,73EZ> C-CAP,S 0.22-16 K W5R<72,73EZ> C-CAP,S C-CAP,S C-CAP,S C-CAP,S C-CAP,S 0.22-16 K W5R<72,73EZ> 3300P-50 K B<72,73EZ> 820P-50 J SL<72,73EZ> 0.1-16 K R GRM<72,73EZ> 0.1-16 K R GRM<72,73EZ>
REF. NO. C630 C631 C632 C634 C635 C636 C637 C638 C639 C641 C642 C643 C644 C667 C668 C669 C670 C671 C672 C673 C679 C680 C682 C771 C772 C773 C774 C779 C780 C782 C783 C784 C785 C786 C788 C789 C790 C791 C792 C793 C794 C794 C795 C796 C797 C798 C799 C800 C801 C802 C803 C804 C806 C807 C808 C809 C810 C810 C811 C811 C812 C812 C814 C815 C816 C818 C819 C820 C821 C823
PART NO.
KANRI NO. 87-010-383-080 87-010-185-080 87-010-185-080 87-010-196-080 87-A10-307-080 87-A10-307-080 87-A10-307-080 87-A10-307-080 87-010-405-080 87-010-401-080 87-010-401-080 87-010-196-080 87-010-401-080 87-010-322-080 87-010-322-080 87-010-322-080 87-010-322-080 87-010-322-080 87-010-322-080 87-010-197-080 87-010-196-080 87-010-197-080 87-010-196-080 87-010-263-080 87-010-197-080 87-010-184-080 87-010-184-080 87-010-188-080 87-010-188-080 87-010-197-080 87-010-197-080 87-010-197-080 87-010-197-080 87-010-197-080 87-010-149-080
DESCRIPTION CAP, ELECT 33-25V C-CAP,S 3900P-50 B C-CAP,S 3900P-50 B CHIP CAPACITOR,0.1-25 CAP,M 0.1-50 J CAP,M 0.1-50 J CAP,M 0.1-50 J CAP,M 0.1-50 J CAP, ELECT 10-50V CAP, ELECT 1-50V CAP, ELECT 1-50V CHIP CAPACITOR,0.1-25 CAP, ELECT 1-50V C-CAP,S 100P-50 J CH GRM C-CAP,S 100P-50 J CH GRM C-CAP,S 100P-50 J CH GRM C-CAP,S 100P-50 J CH GRM C-CAP,S 100P-50 CH C-CAP,S 100P-50 CH CAP, CHIP 0.01 DM CHIP CAP, CHIP CAP, CAP, CAPACITOR,0.1-25 CHIP 0.01 DM CAPACITOR,0.1-25 ELECT 100-10V CHIP 0.01 DM
87-010-183-080 87-A10-292-080 87-010-196-080 87-010-175-080 87-010-175-080 87-010-179-080 87-010-179-080 87-010-545-080 87-010-545-080 87-010-196-080 87-010-197-080 87-010-318-080 87-010-197-080 87-010-402-080 87-010-184-080 87-010-196-080 87-012-156-080 87-010-319-080 87-010-319-080 87-010-319-080 87-010-319-080 87-010-263-080 87-010-196-080 87-012-393-080 87-012-393-080 87-012-393-080 87-010-184-080 87-010-177-080 87-016-081-080 87-016-081-080 87-010-184-080 87-010-177-080 87-012-393-080 87-010-544-080 87-010-374-080 87-010-401-080 87-010-401-080 87-010-183-080 87-010-183-080 87-010-405-080 87-010-196-080 87-010-196-080 87-012-156-080 87-010-178-080 87-010-196-080 87-010-318-080 87-010-178-080 87-010-181-080 87-010-181-080 87-010-956-080 87-016-369-080 87-010-197-080 87-016-669-080 87-010-184-080 87-012-369-080 87-010-401-080 87-010-263-080 87-016-669-080 87-010-197-080 87-010-401-080 87-010-401-080 87-A10-354-080 87-010-400-080 87-010-400-080 87-A10-354-080
CHIP CAPACITOR 3300P(K) CHIP CAPACITOR 3300P(K) C-CAP,S 6800P-50 JR C-CAP,S 6800P-50 JR CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM C-CAP,S 5P-50 CH C-CAP,S 0.015-50 J B C-CAP,S 0.015-50 J B CHIP CAPACITOR,0.1-25 CAP, CHIP 0.01 DM CAP, ELECT 4.7-50V C-CAP,S 470P-50 J CH<70EZ,K> C-CAP,S 180P-50 J CH GRM<72,73EZ> CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM CAP, ELECT 10-50V CAP, CHIP 0.01 DM CAP, ELECT 33-50V C-CAP,S 0.047-50F CAP, ELECT 3.3-50V C-CAP,S 0.047-50F CAP, CHIP 0.022 CAP, ELECT 100-10V CAP,E 1-50 SME CAP, ELECT 0.47-50V CAP, ELECT 1-50V CAP, ELECT 1-50V CAP,E 100-10 CHIP CAPACITOR,0.1-25 CAP, ELECT 3.3-50V CAP,E 0.22-50 SME CAP, ELECT 3.3-50V CAP,E 10-50 CAP, CHIP 0.01 DM CAP, ELECT 3.3-50V CAP, ELECT 3.3-50V C-CAP,S 1500P-50 K B C2012 CAP,CHIP S B1200P CAP,CHIP S B1200P CAP, ELECT 10-50V C-CAP,S 1000P-50 J CH GRM
C-CAP,S 3300P-50 K B C2012<72,73EZ> C-CAP,S 820P-50 J SL C2012<72,73EZ> C-CAP,S 0.22-16 K W5R<72,73EZ> CAP,E 0.1-50 M 11L SME<72,73EZ> CAP,E 47-10 M 11L SME<72,73EZ> CAP,E 1-50 M 11L SME<72,73EZ> CAP,E 1-50 M 11L SME<72,73EZ> C-CAP,S 2700P-50 K B GRM<72,73EZ> C-CAP,S 2700P-50 K B GRM<72,73EZ> CAP,E 10-50 M 11L SME<72,73EZ> C-CAP,S 0.1-25 ZF C2012<72,73EZ> C-CAP,S 0.1-25 ZF C2012<72,73EZ> C-CAP,S 220P-50 J CH GRM<72,73EZ> C-CAP,S 1000P-50 K B C2012<72,73EZ> CHIP CAPACITOR,0.1-25 C-CAP,S 47P-50 J CH GRM<72,73EZ> C-CAP,S 1000P-50 K B<72,73EZ> CAP,CHIP S 1800P CAP,CHIP S 1800P CHIP-CAP,S 0.068-25B C-CAP,S 0.033-25 B K CAP, CHIP 0.01 DM C-CAP,S 0.1-25 K B CHIP CAPACITOR 3300P(K) C-CAP,S 0.047-50F CAP, ELECT 1-50V CAP, ELECT 100-10V C-CAP,S 0.1-25 K B CAP, CHIP 0.01 DM CAP, ELECT 1-50V CAP, ELECT 1-50V C-CAP,S 0.047-50 K B CAP, ELECT 0.47-50V CAP, ELECT 0.47-50V C-CAP,S 0.047-50 K B
87-A10-592-080 87-A10-592-080 87-010-196-080 87-010-197-080 87-010-404-080 87-012-140-080 87-012-155-080 87-010-197-080 87-010-197-080 87-010-405-080 87-010-197-080 87-010-407-080 87-012-369-080 87-010-403-080 87-012-369-080 87-010-198-080 87-010-263-080 87-010-401-040 87-010-400-080 87-010-401-080 87-010-401-080 87-010-263-040 87-010-196-080 87-010-403-080 87-010-545-040 87-010-403-080 87-010-405-040 87-010-197-080 87-010-403-080 87-010-403-080 87-010-180-080 87-010-179-080 87-010-179-080 87-010-405-080 87-012-349-080
-7-
REF. NO. C824 C825 C831 C842 C843 C844 C845 C846 C847 C848 C849 C850 C851 C852 C853 C858 C859 C860 C869 C870 C871 C872 C873 C874 C875 C876 C877 C878 C879 C940 C942 C947 C948 C952 C957 C958 C959 C960 C961 C962 C963 C971 C972 C973 C974 C979 C981 C982 C983 C984 C985 C987 C989 C991 C992 C993 C995 C997 C998 C999 CF831 CF832 CN1 CN91 CN101 CN301 CN351 CN601 CN602 CNA1
PART NO.
KANRI NO. 87-010-404-080 87-010-596-080 87-010-406-080 87-010-197-080 87-010-190-080 87-010-197-080 87-010-190-080 87-010-190-080 87-010-190-080 87-010-190-080 87-010-190-080 87-010-260-080 87-010-197-080 87-010-197-080 87-010-197-080 87-010-196-080 87-010-196-080 87-010-197-080 87-010-197-080 87-018-131-080 87-012-156-080 87-012-156-080 87-012-140-080 87-010-405-080 87-010-196-080 87-010-405-080 87-010-197-080 87-010-316-080 87-010-314-080 87-010-197-080 87-010-149-080 87-010-197-080 87-012-140-080 87-010-197-080 87-010-311-080 87-010-197-080 87-010-196-080 87-010-196-080 87-010-152-080 87-010-401-080 87-015-785-080 87-010-381-080 87-010-404-080 87-010-197-080 87-010-197-080 87-010-322-080 87-010-260-080 87-010-196-080 87-010-197-080 87-010-197-080 87-010-322-080 87-010-197-080 87-010-197-080 87-010-312-080 87-010-312-080 87-010-178-080 87-010-178-080 87-010-196-080 87-010-260-080 87-A11-155-080 87-008-423-010 82-785-747-010 87-A60-996-010 87-A60-109-010 87-A60-996-010 87-A60-620-010 87-A60-625-010 87-099-719-010 87-099-194-010 8A-NF8-653-010
DESCRIPTION CAP, ELECT 4.7-50V CAP, S 0.047-16 CAP,E 22-50 M 11L SME CAP, CHIP 0.01 DM S CHIP F 0.01 CAP, CHIP 0.01 DM S CHIP F 0.01 S CHIP F 0.01 S CHIP F 0.01 S CHIP F 0.01 S CHIP F 0.01 CAP, ELECT 47-25V CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM CHIP CAPACITOR,0.1-25 CHIP CAPACITOR,0.1-25 CAP, CHIP 0.01 DM C-CAP,S 0.01-25 K B C2012<72,73EZ> CAP,TC U 1000P-50 K B<72,73EZ> C-CAP,S 220P-50 J CH GRM<72,73EZ> C-CAP,S 220P-50 J CH GRM<72,73EZ> C-CAP,S 470P-50 J CH<72,73EZ> CAP,E 10-50 M 11L SME<72,73EZ> C-CAP,S 0.1-25 Z F C2012<72,73EZ> CAP,E 10-50 M 11L SME<72,73EZ> C-CAP,S 0.01-25 K B C2012<72,73EZ> C-CAP,S 33P-50 J CH GRM<72,73EZ> C-CAP,S 22P-50 J CH GRM<72,73EZ> C-CAP,S 0.01-25 K B C2012 C-CAP,S C-CAP,S C-CAP,S C-CAP,S C-CAP,S 5P-50 C CH GRM 0.01-25 K B C2012 470P-50 J CH 0.01-25 K B C2012 12P-50 J CH GRM
REF. NO. CNA2 FB301 FB501 FC602 FFE831 FFE831 J101 J102 J601 J832 L101 L102 L301 L302 L351 L801 L802 L811 L821 L822 L832 L861 L941 L942 L951 R161 R162 R163 R164 R790 R991 R993 R995 SFR301 SFR302 SFR303 SFR304 SFR305 SFR306 SFR351 SFR352 TC942 WH1 X861 X991 FRONT C.B C101 C102 C103 C104 C105 C106 C107 C108 C109 C110 C112 C113 C114 C115 C116 C118 C119 C120 C121 C122 C123 C181
PART NO.
KANRI NO. 8A-NF6-630-010 87-008-372-080 87-008-372-080 85-NF5-617-010 A8-6ZA-191-130
DESCRIPTION CONN ASSY,3P (VM) ANF-6 FLTR,EMI BL01 RN1 FLTR,EMI BL01 RN1<72,73EZ> CABLE,FFC 6P-1.25 6ZA-1 FEENM<70EZ,73EZ> 6ZA-1 YFEENC JACK,DIA6.3 BLK ST W/S KM TERMINAL,SP 4P (MSC) JACK,PIN 6P R/W MSC TERMINAL,ANT PAL 2P HSP-312V05 COIL,1UH-S COIL,1UH-S COIL,TRAP 85K(COI) COIL,TRAP 85K(COI) COIL,OSC 85K BIAS COIL,FM DET-N(TOK) FLTR,PCFJZH-450 L(TOK) COIL,2.2UH(CECS) COIL,1POLE MPX(TOK) COIL,1POLE MPX(TOK) COIL,2.2UH K CECS COIL,2.2UH K CECS<73EZ> COIL,ANT LW(COI) 252KHZ COIL,OSC LW(COI) 856KHZ COIL,AM PACK 2(TOK) RES,270-1/2W J RES,270-1/2W J RES,270-1/2W J RES,270-1/2W J CAP, CHIP 0.01 C-CAP,S C-CAP,S C-CAP,S SFR,33K SFR,33K SFR,33K SFR,33K SFR,50K SFR,50K SFR,50K RP RP RP RP DM
A8-6ZA-19C-170 87-A60-483-010 87-A60-238-010 87-A60-885-010 87-A60-403-010 87-003-383-010 87-003-383-010 87-A50-049-010 87-A50-049-010 87-007-342-010 87-A50-608-010 87-A91-551-010 87-005-847-080 87-A50-027-010 87-A50-027-010 87-005-847-080 87-005-847-080 87-A50-020-010 87-A50-019-010 8A-NF8-668-010 87-A00-441-050 87-A00-441-050 87-A00-441-050 87-A00-441-050 87-010-197-080 87-010-322-080 87-010-322-080 87-010-322-080 87-A90-557-080 87-A90-557-080 87-A90-557-080 87-A90-557-080 87-A90-433-080 87-A90-433-080 87-A90-433-080 87-A90-433-080 87-011-253-080 87-A90-510-010 87-A70-091-010 87-A70-061-010
100P-50 CH 100P-50 CH 100P-50 CH K HOKU K HOKU K K H H H HOKU HOKU NVZ6TLTA NVZ6TLTA NVZ6TLTA
C-CAP,S 0.01-25 K B C2012 CHIP CAPACITOR,0.1-25 CHIP CAPACITOR,0.1-25 C-CAP,S 8P-50 CH CAP,E 1-50 M 11L SME CHIP CAP, CAP, CAP, CAP, CAPACITOR, 0.1FZ-25Z ELECT 330-16V ELECT 4.7-50V CHIP 0.01 DM CHIP 0.01 DM
SFR,50K H NVZ6TLTA TRIMMER,CER 30P 4.0X4.5 ECRLA HLDR,WIRE 2.5-9P VIB,XTAL 4.332MHZ CSA-309<72,73EZ> VIB,XTAL 4.500MHZ CSA-309
C-CAP,S 100P-50 CH CAP, ELECT 47-25V CHIP CAPACITOR,0.1-25 CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM C-CAP,S 100P-50 J CH GRM CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM C-CAP,S 15P-50 CH C-CAP,S 15P-50 CH CHIP CAP 1000P CHIP CAP 1000P CHIP CAPACITOR,0.1-25 CAP, ELECT 47-25V CAP,TC U 0.01-16 Z F FILTER, CF SFE10.7MS3G-A CF, MS2 GHY,R CONN,13P V BLK TAC-L13X-A3 CONN,2P V S2M-2W CONN,13P V BLK TAC-L13X-A3 CONN,3P V 2MM JMT CONN,8P V 2MM JMT CONN,30P TYK-B(X) CONN,6P 6216V CONN ASSY,9P TID-A(480)
87-010-190-080 87-010-322-080 87-010-312-080 87-012-157-080 87-010-406-040 87-010-493-040 87-A10-189-040 87-A10-189-040 87-010-196-080 87-010-178-080 87-012-368-080 87-012-369-080 87-010-196-080 87-010-196-080 87-010-196-080 87-012-145-080 87-010-498-040 87-010-196-080 87-010-196-080 87-010-196-080 87-012-393-080 87-010-322-080
S CHIP F 0.01 C-CAP,S 100P-50 CH C-CAP,S 15P-50 CH C-CAP,S 330P-50 CH CAP,E 22-50 SME CAP,E 0.47-50 GAS CAP,E 220-10 CAP,E 220-10 CHIP CAPACITOR,0.1-25 CHIP CAP 1000P C-CAP,S 0.1-50 F C-CAP,S 0.047-50F CHIP CAPACITOR,0.1-25 CHIP CAPACITOR,0.1-25 CHIP CAPACITOR,0.1-25 CAP, CHIP S 270P CH CAP,E 10-16 GAS CHIP CAPACITOR,0.1-25 CHIP CAPACITOR,0.1-25 CHIP CAPACITOR,0.1-25 C-CAP,S 0.22-16 R K C-CAP,S 100P-50 J CH GRM
-8-
REF. NO. C182 C183 C202 C203 C204 C205 C206 C211 C221 C222 C223 C224 C382 C383 C384 C385 C386 C387 C392 C401 C402 C403 C404 C405 C406 C407 C408 C409 C410 C501 C502 C503 C504 C505 C521 C601 C602 C603 C604 C606 C607 C608 C609 C621 C652 C653 C701 CN102 CN104 CN901 CON101 FB601 FB801 FC104 FC901 FL201 J601 J602 L101 LED401 LED402 LED403 LED404 LED405 LED416 LED417 LED418 LED419 LED420 LED421
PART NO.
KANRI NO. 87-010-178-080 87-012-156-080 87-012-157-080 87-012-157-080 87-012-157-080
DESCRIPTION CHIP CAP 1000P C-CAP,S 220P-50 C-CAP,S 330P-50 C-CAP,S 330P-50 C-CAP,S 330P-50
REF. NO. LED422 LED423 LED424 LED440 LED441 LED442 LED443 LED444 LED445 LED454 LED455 LED499 R211 R212 S101 S102 S301 S302 S303 S304 S305 S306 S307 S308 S309 S310 S311 S312 S313 S321 S322 S323 S324 S325 S326 S327 S328 S333 S334 S341 S342 S343 S344 S345 S346 S347 S348 S349 S350 S351 S352 S353 S354 S355 VR501 AMP C.B C101 C102 C103 C104 C107 C108 C111 C112 C113 C114 C115 C116
PART NO.
CH CH CH CH
KANRI NO. 87-A40-317-080 87-A40-317-080 87-A40-317-080 87-A40-563-010 87-A40-563-010 87-A40-563-010 87-A40-563-010 87-A40-563-010 87-A40-563-010 87-A40-678-010 87-A40-678-010 87-017-733-080 87-012-156-080 87-012-156-080 87-A91-709-010 87-A91-710-010 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 87-A91-024-180 86-NFA-607-010
DESCRIPTION LED,SLR-342VCT31 RED LED,SLR-342VCT31 RED LED,SLR-342VCT31 RED LED,SEL6515C-LF62 PGRN LED,SEL6515C-LF62 PGRN LED,SEL6515C-LF62 PGRN LED,SEL6515C-LF62 PGRN LED,SEL6215S-LF62 PGRN LED,SEL6215S-LF62 PGRN LED,SELU1E10CXM BLUE-DEF LED,SELU1E10CXM BLUE-DEF LED,SEL1250SM C-CAP,S 220P-50 J CH GRM C-CAP,S 220P-50 J CH GRM SW,RTRY 1-2-24 RE012103 PV SW,RTRY SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT VR,RTRY 1-2-12 RE012103 PV KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT<72,73EZ> KSHG611BT<72,73EZ> KSHG611BT<72,73EZ> KSHG611BT<72,73EZ> KSHG611BT<72,73EZ> KSHG611BT<72,73EZ> KSHG611BT<72,73EZ> KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT KSHG611BT 10K15AX1 XV0121PVN<70EZ,K>
87-012-157-080 87-012-156-080 87-012-140-080 87-010-421-040 87-010-404-040 87-010-408-040 87-012-369-080 87-010-320-080 87-010-196-080 87-010-196-080 87-010-196-080 87-010-196-080 87-010-196-080 87-010-320-080 87-010-196-080 87-010-196-080 87-010-322-080 87-010-322-080 87-010-322-080 87-010-322-080 87-010-322-080 87-010-322-080 87-010-196-080 87-010-196-080 87-010-544-040 87-010-196-080 87-010-544-040 87-012-156-080 87-010-178-080 87-010-178-080 87-010-186-080 87-010-405-040 87-010-320-080 87-010-546-040 87-010-112-040 87-010-196-080 87-010-178-080 87-010-196-080 87-010-178-080 87-010-183-080 87-010-213-080 87-010-260-040 8A-NF7-605-010 87-099-017-010 87-A60-138-010 87-099-720-010 87-008-372-080 87-008-372-080 88-915-111-110 85-NF5-618-010 8A-NF7-601-010 87-A61-242-010 87-A61-242-010 87-A50-333-010 87-017-733-080 87-017-733-080 87-017-733-080 87-017-733-080 87-017-733-080 87-A40-619-080 87-A40-619-080 87-A40-619-080 87-A40-619-080 87-A40-619-080 87-A40-619-080
C-CAP,S 330P-50 CH C-CAP,S 220P-50 J CH GRM CAP 470P CAP,E 4.7-50 5L CAP,E 4.7-50 SME CAP,E 47-50 SME C-CAP,S 0.047-50F CHIP CAP 68P CHIP CAPACITOR,0.1-25 CHIP CAPACITOR,0.1-25 CHIP CHIP CHIP CHIP CHIP CAPACITOR,0.1-25 CAPACITOR,0.1-25 CAPACITOR,0.1-25 CAP 68P CAPACITOR,0.1-25
CHIP CAPACITOR,0.1-25 C-CAP,S 100P-50 CH C-CAP,S 100P-50 CH C-CAP,S 100P-50 CH C-CAP,S 100P-50 CH C-CAP,S 100P-50 CH C-CAP,S 100P-50 CH C-CAP,S 0.1-25 Z F C2012 CHIP CAPACITOR,0.1-25 CAP,E 0.1-50 SME<70EZ,K> CHIP CAPACITOR,0.1-25<70EZ,K> CAP,E 0.1-50 SME<70EZ,K> C-CAP,S 220P-50 CH<70EZ,K> CHIP CAP 1000P<70EZ,K> CHIP CAP 1000P<70EZ,K> CAP,CHIP 4700P CAP,E 10-50 M 11L SME<72,73EZ> CHIP CAP 68P CAP,E 0.33-50 CAP,E 100-16 CHIP CAPACITOR,0.1-25 CHIP CAP 1000P<72,73EZ> CHIP CAPACITOR,0.1-25 CHIP CAP 1000P C-CAP,S 2700P-50 B C-CAP,S 0.015-50 B CAP,E 47-25 SME CONN ASSY,4P V 80MM CONN, 15P 6216 V CONN,13P V FE CONN,30P TYK-B(P) FILTER, EMI BL OIRNI FILTER, EMI BL OIRNI FF-CABLE,15P 1.25 CABLE,FFC 13P-1.25 FL,BJ754GNK JACK,6.3 BLK MONO W/SW V JACK,6.3 BLK MONO W/SW V<72,73EZ> COIL,OSC 9.43MHZ LED,SEL1250SM LED,SEL1250SM LED,SEL1250SM LED,SEL1250SM LED,SEL1250SM LED,SLR-56PT-TE7-W GRN LED,SLR-56PT-TE7-W LED,SLR-56PT-TE7-W LED,SLR-56PT-TE7-W LED,SLR-56PT-TE7-W LED,SLR-56PT-TE7-W GRN GRN GRN GRN GRN
87-010-183-080 87-010-183-080 87-010-545-080 87-010-545-080 87-010-405-080 87-010-405-080 87-010-179-080 87-010-179-080 87-010-405-080 87-010-405-080 87-010-866-080 87-010-866-080
C-CAP,S 2700P-50 B C-CAP,S 2700P-50 B CAP, ELECT 0.22-50V CAP, ELECT 0.22-50V CAP, ELECT 10-50V CAP, ELECT 10-50V C-CAP,S 1200P-50 K B GRM<72,73EZ> C-CAP,S 1200P-50 K B GRM<72,73EZ> CAP, ELECT 10-50V CAP, ELECT 10-50V CAP, ELECT 10-63 CAP, ELECT 10-63
-9-
REF. NO. C117 C119 C120 C133 C153 C201 C202 C203 C204 C205 C206 C207 C208 C209 C210 C211 C212 C215 C216 C217 C218 C219 C221 C222 C223 C224 C251 C252 C253 C254 C255 C256 C257 C258 C401 CN101 CN102 CNA101 J201 L251 L252 R129 R130 R231 R232 WH101 PT C.B C1 C2 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C16 CN1 CN2
! ! ! ! !
PART NO.
KANRI NO. 87-012-368-080 87-010-197-080 87-010-197-080 87-010-190-080 87-010-188-080 87-A10-300-080 87-A10-300-080 87-A10-300-080 87-A10-300-080 87-010-180-080
DESCRIPTION C-CAP,S 0.1-50 ZF CAP, CHIP 0.01 DM CAP, CHIP 0.01 DM C-CAP,S 0.01-50 Z F C2012 C-CAP,S 6800P-50 K B C2012 CAP,M CAP,M CAP,M CAP,M C-CER 0.027-50 0.027-50 0.027-50 0.027-50 1500P J J J J
REF. NO. VM C.B CNA3 DECK C.B CON105 SFR1 SOL1 SOL2 SW1 SW2 SW3 SW4 SW5 SW6 SW8 SW9 W1
PART NO.
KANRI NO.
DESCRIPTION
87-049-919-010
CONN,3P V WHT EH
87-099-756-010 87-024-581-010 82-ZM1-618-410 82-ZM1-618-410 87-A90-248-010 87-A90-248-010 87-A90-248-010 87-036-110-010 87-036-110-010 87-036-110-010 87-A90-248-010 87-A90-248-010 82-ZM3-601-010
CONN,15P 9604 S F SFR,3.3K DIA 6H SOL ASSY,27 SOL ASSY,27 SW,MICRO ESE11SH2CXQ SW,MICRO SW,MICRO SW,MICRO SW,MICRO SW,MICRO ESE11SH2CXQ ESE11SH2CXQ SPPB62 SPPB62 SPPB62
87-010-180-080 87-010-401-080 87-010-401-080 87-010-187-080 87-010-187-080 87-010-402-080 87-010-402-080 87-012-140-080 87-012-140-080 87-010-403-080 87-010-403-080 87-010-197-080 87-010-405-080 87-010-405-080 87-010-197-080 87-010-197-080 87-010-196-080 87-010-196-080 87-010-196-080 87-010-196-080 87-010-190-080 87-010-190-080 87-010-190-080 87-010-190-080 87-010-260-080 87-A61-011-010 87-A61-011-010 8A-NF8-656-010 87-A61-148-010 87-A50-610-010 87-A50-610-010 87-A00-262-080 87-A00-262-080 87-A00-258-080 87-A00-258-080 87-A90-459-010
C-CER 1500P CAP, ELECT 1-50V CAP, ELECT 1-50V CAP CHIP S5600P CAP CHIP S5600P CAP, ELECT 2.2-50V CAP, ELECT 2.2-50V C-CAP,S 470P-50 J CH C-CAP,S 470P-50 J CH CAP, ELECT 3.3-50V CAP, CAP, CAP, CAP, CAP, CAP, CHIP CHIP CHIP CHIP ELECT 3.3-50V CHIP 0.01 DM ELECT 10-50V ELECT 10-50V CHIP 0.01 DM CHIP 0.01 DM CAPACITOR,0.1-25 CAPACITOR,0.1-25 CAPACITOR,0.1-25 CAPACITOR,0.1-25
SW,MICRO ESE11SH2CXQ SW,MICRO ESE11SH2CXQ RBN,CORD,4P-75
HEAD-1 C.B 85-ZM3-602-010 HEAD-2 C.B CON351 85-ZM3-602-010 87-NF6-616-010 PWB,FLEX A CONN ASSY,8P-RPB PWB,FLEX A
S CHIP F 0.01 S CHIP F 0.01 S CHIP F 0.01 S CHIP F 0.01 CAP, ELECT 47-25 CONN,13P H BLK TAC-L13P-A3 CONN,13P H BLK TAC-L13P-A3 CONN ASSY,5P TID-A 400 JACK,PIN 4P R/W BLUE COIL,1UH K (MDEC) COIL,1UH K (MDEC) RES,M/F 0.15-2W J RES,M/F 0.15-2W J RES,M/F 0.22-1W J RES,M/F 0.22-1W J HLDR,WIRE 2.5-5P
87-010-387-080 87-A11-148-080 87-A11-148-080 87-A11-148-080 87-A10-627-000 87-A10-627-000 87-A11-148-080 87-A11-148-080 87-A11-148-080 87-A11-148-080 87-016-520-000 87-016-520-000 87-010-403-080 87-A61-110-010 87-A61-108-010 8A-NF7-623-010 8A-NF8-673-010 87-A90-976-010 87-A60-317-010 87-A60-317-010
CAP,E 470-25 SME CAP,TC U 0.1-50 Z F CAP,TC U 0.1-50 Z F CAP,TC U 0.1-50 Z F CAP,E 2200-50 M SMG CAP,E 2200-50 M CAP,TC U 0.1-50 CAP,TC U 0.1-50 CAP,TC U 0.1-50 CAP,TC U 0.1-50 SMG Z F Z F Z F Z F
CAP,E 3300-65 M SMG CAP,E 3300-65 M SMG CAP, ELECT 3.3-50V CONN,9P V TID-A CONN,5P V TID-A PT,ANF-7 EZK PT,SUB ANF-8 RELAY,AC 12V TERMINAL, 1P TERMINAL, 1P (H) KAMI SDT-S-112LMR MSC MSC
PT1 PT2 RY2 T1 T2
- 10 -
CHIP RESISTOR PART CODE
Chip Resistor Part Coding
8 8
A
Resistor Code Value of resistor Chip resistor
Dimensions (mm)
Figure
Wattage 1/16W 1/16W 1/10W 1/8W
Type 1005 1608 2125 3216
Tolerance 5% 5% 5% 5%
Symbol CJ CJ CJ CJ
Form
L W
L 1.0
t
W 0.5 0.8 1.25 1.6
t 0.35 0.45 0.45 0.55
:A Resistor Code : A
104 108 118 128
1.6 2 3.2
TRANSISTOR ILLUSTRATION
D
G E C B E C B B C E
S
KTA1266GR KTC3198GR KTC3199GR CSA952K
CD1585BC CSC4115BC
DTC114ES 2SA933
2SB1370
2SK2158 2SJ461-T1
C
B
E
2SA1235F 2SC2714 2SC3052F CMBT5551 CMBT5401 CSD1306E
RT1N141C RT1P141C RT1P144C RT1P441C
- 11 -
WIRING - 1 (MAIN)
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
- 12 -
SCHEMATIC DIAGRAM - 1 (MAIN 1 / 3: AMP/ VM)
- 13 -
SCHEMATIC DIAGRAM - 2 (MAIN 2 / 3: DECK / HEAD-1 / HEAD-2)
- 14 -
SCHEMATIC DIAGRAM - 3 (MAIN 3 / 3: TUNER)
- 15 -
WIRING - 2 (FRONT)
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
- 16 -
SCHEMATIC DIAGRAM - 4 (FRONT/ DECK)
- 17 -
WIRING - 3 (AMP: K)
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
- 18 -
WIRIING - 4 (AMP: EZ)
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
- 19 -
SCHEMATIC DIAGRAM - 5 (AMP)
- 20 -
WIRING - 5 (PT)
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
- 21 -
SCHEMATIC DIAGRAM - 6 (PT)
- 22 -
WIRING - 6 (DECK / HEAD-1 / HEAD-2)
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
- 23 -
IC BLOCK DIAGRAM
- 24 -
- 25 -
FL (BJ754 GNK)GRID ASSIGNMENT AND ANODE CONNECTION
GRID ASSIGNMENT
- 26 -
ANODE CONNECTION
- 27 -
IC DESCRIPTION
IC, LC876564V-5P35/LC876572V-5063/LC876572V5063 Pin No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 ~ 21 22 23 24 25 26 27 28 29 30 ~ 42 43 ~ 45 46 47 48 49 50 51 52 53 54 55 56 57
Pin Name
O-CLK O-DATA O-STB O-POWER O-STB O-RYM-CS O-PLL-CE I-STEREO O-CLK SHIFT I-HP-MUTE RESET I-DISH I-SPEANA VSS1 CF 1
I/O
O O O O O O O I O I I I I Common serial CLOCK output. Common Serial DATA output. Common serial STROBE output. System power ON/OFF output. Strobe output for shift register. Chip select output for rhythm IC. Chip enable output for PLL. Stereo detect input. Tuner clock shift output (active L). Headphones connect detect input. Reset input. CD turn table photo sensor input. Spectrum analyger level AD input. Connected to GND. 9.43MHz oscillator circuit. Power supply.
Description
CF2 VDD1 I-HOLD KEY 1 ~ 3 I-CDSW I-RTVR I-JOG I-MIC I-MS I-TM-BASE I-WRQ I-RMC G13 ~ G1 P35 ~ P33 VDD3 P32/SPEANA A P31/SPEANA B P30/SPEANA C P29/BEAT-M -VP P28/AM-ST P27/LW P26/SW P25/FM1 P24/KASINO P23/ECO I I I I I I I I I I O O O O O O/I O/I O/I O/I O/I O/I O/I
Power supply voltage detect A/D input. KEY 1 ~ 3 A/D input. CD mechanism SW A/D input. Rotary encorder A/D input for VR. Rotary encorder A/D input for MULTI JOG. MIC input for auto vocal fader. DECK MS detect input Timebase clock (8Hz) input. CD WRQ input. Remote control signal input. Active: "L". FL grid G13 ~ G1 output. FL segment P35 ~ P33 output. Power supply. FL segment P32 output / Spectrum analyger band select output (A) . FL segment P31 output / Spectrum analyger band select output (B) . FL segment P30 output / Spectrum analyger band select output (C). FL segment P29 output / Beat master less diode input. Connected to -VFL. FL segment P28 output / AM-STEREO diode input (Not used). FL segment P27 output / LW diode input. FL segment P26 output / SW diode input(Not used). FL segment P25 output / FM1 diode input. FL segment P24 output / Initial KASINO DEMO diode input (Not used). FL segment P23 output / Initial ECO mode less diode input(Not used).
- 28 -
Pin No.
58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 ~ 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
Pin Name
P22/DSP P21/PRO/5.1 P20 P19/DOBLY P18 P17/AM10K P16/CST2 P15/REB P14/CAM2 P13/AUTO1 P12/AUTO2 P11/CAM1 P10/CST1 P9/REA VDD4 P8/AC-DEMO P7 ~ 1 NC O-TRAY CLOSE O-TRAY OPEN I-SUBQ O-DISH-FWD O-DISH-REV O-DATA O-LED-STBY VSS2 VDD2 O-MOTOR O-MUTE O-SOL1 O-SOL2 I-DRF I-IFC NC O-CD CLK O-CD-CE O-KSCAN
I/O
O/I O/I O O/I O O/I O/I O/I O/I O/I O/I O/I O/I O/I O/I O O O O O O O O O O O O I I O O O
Description
FL segment P22 output / DSP less diode input. FL segment P21 output / PRO-LOGIC 5.1CH diode input (Not used). FL segment P20 output. FL segment P19 output / Deck DOBLY diode input. FL segment P18 output. FL segment P17 output / AM10 change diode input (Not used). FL segment P16 output / Deck 2 cassette detect sw input. FL segment P15 output / Deck side B record permission sw input. FL segment P14 output / Deck 2 CAM sw input. FL segment P13 output / Deck 1 auto stop input. FL segment P12 output / Deck 2 auto stop input. FL segment P11 output / Deck 1 CAM sw input. FL segment P10 output / Deck 1 cassette detect sw input. FL segment P9 output / Deck side A record permission sw input. Power supply. FL segment P8 output / Demo less diode input. FL segment output (P7 ~ 1). Not connected. CD tray close output. CD tray open output. CD SUBQ detect input. CD turn table forward revolution output. CD turn table reverse revolution output. CD data output. STBY LED on output (STBY LED on during O-POWER OFF). Connected to GND. Power supply. DECK motor output. System mute ON/OFF output. DECK1 plunger ON/OFF output. DECK2 plunger ON/OFF output. CD DRF input. Tuner IFC input. Not connected. CD CLK output. CD CD output. Key scan timing output.
- 29 -
< TUNER SECTION >
1. Clock Frequency Check Settings : · Test point : TP2 (CLK) Method : Set to MW 1602kHz and check that the test point is 2052kHz ± 45Hz. 2. MW VT Check Settings : · Test point : TP1 (VT) Method : Set to MW 1602kHz and check that the test point is less than 8.0V. Then set to MW 531 kHz and check that the test point is more than 0.6 V. 3. MW Tracking Adjustment Settings : · Test point : TP8(Lch), TP9(Rch) · Adjustment location : L951(1/3)........................ 999kHz Method : Set to AM 999kHz and adjust L951(1/3) so that the test point is max. 4. LW VT Adjustment Settings: · Test point : TP1 (VT) · Ajustment location : L942 Method : Set to LW 144kHz and adjust L942 so that the test point becomes 1.3V ± 0.05 V. Then set to LW 290kHz and check that the test point is less than 8.0V. 5. LW Tracking Ajustment Settings : · Test point : TP8(Lch),TP9(Rch) · Ajustment location : L941................................144kHz TC942..............................290kHz Method: Set to TC942 to center before adjustment. The level at 144kHz is adjusted to max. by L941. Then the level at 290kHz is adjusted to max.by TC942. 6. FM VT Check Settings : · Test point : TP1 (VT) Method : Set to FM 108.0MHz and check that the test point is less than 8.0V. Set to FM 87.5MHz and check that the test point is more than 0.5V. 7. FM Tracking Check Settings : · Test point : TP8(Lch), TP9(Rch) Method : Set to FM 98.0MHz and check that the test point is less than 9.0dBµV. 8. MW IF Adjustment Settings : · Test point : TP8(Lch), TP9(Rch) · Adjustment location : L802 · Input level : Variable Method : Adjust L802 so that the output becomes max. 9. DC Balance / Mono Distortion Adjustment Settings : · Test point : TP3, TP4 (DC Balance) TP8(Lch), TP9(Rch) (Distortion) · Adjustment location : L801 · Input level : 60dBµV Method : Set to FM 98.0MHz and adjust L801 so that the voltage between TP3 and TP4 becomes 0V ± 0.3V. Next, check that the distortion is minimum.
< DECK SECTION >
10. Tape Speed Adjustment (DECK 2) Settings : · Test tape : TTA100(3kHz) · Test point : TP10(Lch), TP11(Rch) · Adjustment location : SFR1 Method : Play back the test tape and adjust SFR1 so that the frequency counter reads 3000Hz ± 5Hz(FWD) and ± 45Hz(REV) with respect to forward speed. 11. Head Azimuth Adjustment (DECK 1, DECK 2) Settings : · Test tape : TTA300 (315/10kHz) · Test point : TP10(Lch), TP11(Rch) · Adjustment location : Head azimuth adjustment screw Method : Play back the 10kHz signal of the test tape and adjust screw so that the output becomes maximum. Next, perform on each FWD PLAY and REV PLAY mode. 12. PB Frequency Response Check (DECK 1, DECK 2) Settings : · Test tape : TTA300 (315/10kHz) · Test point : TP10(Lch), TP11(Rch) Method : Play back the 315Hz and 10kHz signals of the test tape and check that the output ratio of the 10kHz signal with respect to that of the 315Hz signal is within 0 ± 3dB. 13. REC/PB Frequency Response Adjustment (DECK 2) Settings : · Test tape : TTA602 (Normal) · Test point : TP10(Lch), TP11(Rch) · Input signal : 1kHz / 10kHz (LINE IN) · Adjustment location : SFR351 (Lch) SFR352 (Rch) Method : Apply a 1kHz signal and REC mode. Then adjust OSC attenuator so that the output level at the test points becomes 9.0mV. Record and play back the 1kHz and 10kHz signals and adjust SFRs so that the output level of the 10kHz signals becomes 0dB ± 0.5dB with respect to that of the 1kHz signal. 14. REC/PB Frequency response Check (DECK 2) Settings : · Test tape : TTA-615 (CrO2) · Test point : TP10(Lch), TP11(Rch) · Input signal : 1kHz/10kHz (LINE IN) Method : Apply a 1kHz signal and REC mode. Then adjust OSC attenuator so that the output level at the test points becomes 9.0mV. Record and play back the 1kHz and 10kHz signals and check that the output is 0dB ± 2dB. 15. REC/PB Sensitivity Check (DECK 2) Settings : · Test tape : TTA-615 (CrO2) · Test point : TP10(Lch), TP11(Rch) · Input signal : 1kHz (LINE IN) Method : Apply a 1kHz signal and REC mode. Then adjust OSC attenuator so that the output level at the test points becomes 90mV. Record and play back the 1kHz signal and check that the output is -1dB ± 3dB. 16. µ-CON OSC Adjustment Settings : · Test point : TP5(K-SCAN) · Adjustment location : L101 Method : Insert AC plug with pressing TUNER function key. Adjust L101 so that the frequency across the test point is 208.8Hz ± 0.2Hz.
- 30 -
MECHANICAL EXPLODED VIEW 1 / 1
A 24 b 39 25 AZG-1 c I K A P.C.B F 23 A 22 21 29 FL201 20 45 27 A HT-SINK BINDER, WIRE 47 E 18 30 33 32 8 7 2 9 10 11 12 1 3 4 5 6 13 9 16 31 PLATE, EARTH MECHA 32 36 A 2ZM-3MK2 37 H E 34 A A A 35 48 c A 31 a P.C.B 54 P.C.B G J A A K A 46 HT-SINK B 38 a A 44 A P.C.B A L 26 D A A A A A A 41 A b 42 A A 43 A
40
19
28
14
17 C 15 BINDER, WIRE
A CHAS,MAIN 53 52 51 50 49 F
L
- 31 -
MECHANICAL PARTS LIST 1 / 1
REF. NO.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 17 18 19 19 20 20 20 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
PART NO.
KANRI NO. 8A-NF7-010-010 8A-NF7-003-010 82-NF5-218-010 8A-NF7-011-010 82-NF5-219-010
DESCRIPTION
WINDOW,CASS BOX,CASS 1 SPR-T,EJECT WINDOW,CASS SPR-T,EJECT 1 1 (SIN) 2 2 (SIN)
REF. NO.
36 37 38 39 40 41 41 41 41 42 43 44 45 46 47
!
PART NO.
KANRI NO. 87-NF4-217-110 87-NF4-221-010 8A-NF8-206-010 87-A91-711-010 8A-NF7-249-010
8A-NF7-148-010 8A-NF7-142-010 8A-NF7-159-010 8A-NF7-146-010 84-ZG1-245-210
DESCRIPTION
HLDR,LOCK 2 HLDR,CABLE HLDR,PWB M FAN, 3110GL-B4W-B34-H02 -400MM HODR,FAN H20 PANEL,REAR EZSE73-F<73EZ> PANEL,REAR EZSM-F<70EZ> PANEL,REAR EZSM73-F<73EZ> PANEL,REAR KSE-F CAP,OPTICAL COVER, REAR H20 EZ HLDR,IC2-T2 HLDR,HT L HLDR,HT R HLDR,PWB PT 85S PANEL,RIGHT V-2 AC CORD ASSY,E BLK CC BUSHING, AC CORD (E) FOOT,H13.5 COVER, PL M3 COVER, PL HLDR,PWB-M BTM TAPPING SCREW, BVT2+3-10 TAPPING SCREW, BVT2+3-15 BVTT+3-6 S-SCREW,IT3B+3-8 CU QT2+3-12 GLD UTT2+3-8(W/O SLOT)BL S-SCREW,IT+4-10 QT2+3-10W/O SLOT BL TAPPING SCREW, BVTT+3-8 TAPPING SCREW, BVT2+3-8 TAPPING SCREW, BVT2+3-6 W,3.2-8-0.45
8A-NF7-004-010 8A-NF7-012-010 8A-NF7-041-010 8Z-NF6-210-010 8A-NF7-029-010 81-532-080-010 8A-NF7-048-110 8A-NF7-024-010 8A-NF7-049-010 8A-NF7-034-010 8A-NF7-023-010 8A-NF7-082-010 8A-NF7-084-010 8A-NF7-015-010 8A-NF7-103-010 8A-NF7-105-010 8A-NF7-100-010 8A-NF7-095-010 8A-NF7-091-010 8A-NF7-093-010 8A-NF7-005-010 87-CE3-023-010 8A-NF7-008-010 8A-NF8-007-010 8A-NF8-006-010 8A-NF8-005-010 8A-NF7-035-010 8A-NF7-026-010 87-NF5-203-110 8A-NF7-021-010 82-NF5-229-010 86-NF9-224-010 87-NF4-216-010 8A-NF7-047-010 8A-NF7-033-010
BOX,CASS 2 PANEL,DIRECT KEY,ASSY CD DMPR,150 N KEY,GEQ LABEL, CASS. COMPT KNOB,RTRY ASSY JOG KEY,SURROUND<73EZ> KNOB,RTRY ASSY VOL KEY,MIC<73EZ> KEY,ENTER CABI,FR EZ<72EZ,73EZ> CABI,FR K KNOB,RTRY MIC<70EZ> PANEL,ASSY FR EZ<72EZ,73EZ> PANEL,ASSY FR K WINDOW,DISP EZ72<72EZ> WINDOW,DISP EZ73<73EZ> WINDOW,DISP HR<70EZ> WINDOW,DISP LH PANEL,TRAY U BADGE,AIWA 30N SILV PANEL,CD PANEL,LEFT V-2 WINDOW,TOP PANEL,TOP KEY,ASSY FUN KEY,ASSY OPE GUIDE,FL(*) KEY,BBE PLATE,LOCK SPR-C,LOCK HLDR,LOCK 1 KEY,DOLBY<70EZ,73EZ> KEY,RDS<73EZ>
8A-NF7-124-010 8A-NF7-226-010 8A-NF7-207-010 8A-NF7-208-010 8A-NF7-225-010 8A-NF7-112-010 87-A80-157-010 87-085-185-010 87-085-221-010 8Z-NB8-254-010 8Z-NB8-240-010 8A-NF7-209-010 87-067-703-010 87-067-581-010 87-067-688-010 87-NF4-224-010 87-721-097-410 87-067-641-010 87-078-191-010 87-723-096-410 87-067-689-010 87-067-579-010 87-067-584-010 8A-NF7-251-010
48 49 50 51 52 53 54 A B C D E F G H I J K L
COLOR NAME TABLE
Basic color symbol Color Basic color symbol Color Basic color symbol Color B Black C Cream D Orange G Green H Gray L Blue LT Transparent Blue N Gold P Pink R Red S Silver ST Titan Silver T Brown V Violet W White WT Transparent White Y Yellow YT Transparent Yellow LM Metallic Blue LL Light Blue GT Transparent Green LD Dark Blue DT Transparent Orange GM Metallic Green YM Metallic Yellow DM Metallic Orange PT Transparent Pink
- 32 -
TAPE MECHANISM EXPLODED VIEW 1 / 1
14 15 B 42 A 16 PH(DECK 1) RPH(DECK 2) B
51 SOL 2 52 8 DECK C.B
12 13
8
17 11 10 18 (DECK 2) 9 7
50 56 SOL 1
49
A 44 41 50 B 47 43 35 48 41 E 37 33
3 18 (DECK 1) 2
19
5
6 A 20 4
45
36
46
31
34 32 58
HEAD 1 C.B(DECK 1) HEAD 2 C.B(DECK 2) 57
(DECK 1)
22
D C
21 24
D
A 59
40 55 (DECK 1) 39
29
(DECK 2)
25 23 26 29 (DECK 2)
B
D C
38
A
27
1
28
C
54 53
- 33 -
TAPE MECHANISM PARTS LIST 1 / 1
REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 18 19 20 21 22 23 24 25 26 27 28 29 31 32 33 34 35
PART NO.
KANRI NO. 82-ZM3-301-510 82-ZM1-258-110 82-ZM1-341-110 82-ZM1-333-010 82-ZM1-266-11K 82-ZM1-214-010 82-ZM1-206-81K 82-ZM3-340-010 82-ZM1-269-210 82-ZM1-219-110 82-ZM1-210-110 82-ZM1-213-010 82-ZM1-207-610 86-ZM4-206-010 82-ZM1-314-110 82-ZM1-208-110 82-ZM1-218-010 82-ZM1-263-110 82-ZM1-264-010 82-ZM1-222-21K 82-ZM1-217-310 82-ZM1-244-510 82-ZM1-285-310 82-ZM1-257-010 82-ZM1-241-310 82-ZM1-242-010 82-ZM1-243-010 82-ZM1-344-110 82-ZM1-259-110 82-ZM1-240-11K 82-ZM1-255-310 82-ZM3-305-01K 82-ZM1-227-21K 82-ZM3-306-11K 82-ZM1-265-110
DESCRIPTION CHAS ASSY,M2 SPR-T,PINCH L LVR ASSY,PINCH L2 PLATE,LINK 2 LVR,DIR SPR-T,DIR CHAS,HEAD SH,BELT D2 SPR-T,BRG SPR-T,LINK GEAR,H T SPR-T,HEAD GUIDE,TAPE S-SCREW,AZIMUTH PLATE,HEAD HLDR,HEAD SPR-E,HB LVR,EJECT L (DECK 1) LVR,EJECT R (DECK 2) LVR,PLAY REEL TABLE SPR-C,BT SPR-C,BT L SPR-T,CAS LVR,MC LVR,CAS LVR,STOP LVR ASSY,PINCH R2 SPR-T,PINCH R LVR,REC (DECK 2) SPR-E,LVR DIR GEAR,CAM M2 LVR,TRIG LVR,FR M2 SPR-E,TRIG
REF. NO. 36 37 38 39 40 41 42 42 43 44 45 46 47 47 48 48 49 50 51 52 53 54 55 56 57 58 59 A B C D E
PART NO.
KANRI NO. 82-ZM3-339-010 86-ZM1-206-010 82-ZM1-322-010 82-ZM1-220-210 82-ZM3-616-010
DESCRIPTION SHAFT,COUPLER N3(DECK 1) BELT,MAIN L SPR-T,FR60 GEAR,IDLER RING MAGNET 4 GEAR,REEL HEAD,PH HADKH2 FPC HEAD,RPH HADKH5 FPC GEAR,FR GEAR,REW SLIP DISK ASSY 2 BELT FR4 FLY-WHL,R W(DECK 2) FLY-WHL,R3 W(DECK 1) FLY-WHL,L W(DECK 2) FLY-WHL,L W(DECK 1) BELT,SBU R2 HLDR,IC MOT,SHU2L 70(M1) PULLEY,MOT 2M SH,1.63-3.2-0.5 SLT SH,1.75-3.6-0.5 SLT PULLEY,COUPLER M3(DECK 1) BELT,SBU MOT 2 SHAFT,COUPLER N3(DECK 1) BELT,MAIN L SH,BELT D2 S-SCREW,TG V+1.6-7 S-SCRW MOTOR M2 W-P,0.99-4-0.25 SLT PW,2.16-6-0.4
82-ZM1-216-31K 87-A90-319-010 87-A90-320-010 82-ZM1-225-21K 82-ZM1-226-010 82-ZM3-333-310 82-ZM1-338-010 82-ZM1-349-110 82-ZM3-338-110 82-ZM1-348-010 82-ZM1-348-010 82-ZM3-329-210 82-ZM1-245-210 87-045-347-019 82-ZM3-221-010 82-ZM1-288-019 80-ZM6-243-019 82-ZM3-335-210 82-ZM3-337-010 82-ZM3-339-010 86-ZM1-206-010 82-ZM3-340-010 85-ZM3-202-010 80-ZM6-207-019 82-ZM3-318-019 87-B10-043-010 82-ZM3-334-010
- 34 -
SPEAKER DISASSEMBLY INSTRUCTIONS
Type.1 Insert a flat-bladed screwdriver into the position indicated by the arrows and remove the panel. Remove the screws of each speaker unit and then remove the speaker units. Type.4
TOOLS
1 Plastic head hammer 2 (() flat head screwdriver 3 Cut chisel
1
2
3
How to Remove the PANEL, FR
Type.2 Remove the grill frame and four pieces of rubber caps by pulling out with a flat-bladed screwdriver. Remove the screws from hole where installed rubber caps. Insert a flat-bladed screwdriver into the position indicated by the arrows and remove the panel. Remove the screws of each speaker unit and then remove the speaker units. 1. Insert the (() flat head screwdriver tip into the gap between the PANEL, FR and the PANEL, SPKR. Tap the head of the (() flat head screwdriver with the plastic hammer head, and create the clearance as shown in Fig-1. Insert the cut chisel in the clearance, and tap the head of the cut chisel with plastic hammer as shown in Fig-2, to remove the PANEL, FR. Place the speaker horizontally. Tap head of the cut chisel with plastic hammer as shown in Fig-3, and remove the PANEL, FR completely.
2.
3.
Type.3 Insert a flat-bladed screwdriver into the position indicated by the arrows and remove the panel. Turn the speaker unit to counterclockwise direction while inserting a flat-bladed screwdriver into one of the hollows around speaker unit, and then remove the speaker unit. After replacing the speaker unit, install it turning to clockwise direction until "click" sound comes out.
Fig-1
Fig-2
Fig-3
How to Attach the PANEL, FR
Attach the PANEL, FR to the PANEL, SPKR. Tap the four corners of the PANEL, FR with the plastic hammer to fit the PANEL, FR into the PANEL, SPKR completely.
- 35 -
SPEAKER PARTS LIST SX-WNSZ70/71 (YSL)
REF. NO. 1 2 3 4 5 6 7 8 9 10 10
PART NO.
KANRI NO. 8Z-NS6-606-110 8A-NS7-604-010 88-NSK-610-010 8Z-NSJ-006-010 8A-NS7-017-010 88-NS5-610-010 88-NS5-611-010 8A-NS7-001-010 8A-NS7-004-010 8A-NS7-005-010 8A-NS7-018-010
DESCRIPTION SPKR, W 160 SPKR,M 100 SPKR, CERAMIC ASSY BADGE,AIWA S35 PROTECTOR, CORD,SPKR CORD,SPKR B/L PANEL,FR PANEL,DUCT GRILLE,FRAME ASSY GRILLE,FRAME ASSY 71
REF. NO.
PART NO.
KANRI NO.
DESCRIPTION
SPEAKER PARTS LIST SX-WNH81 (YML)
REF. NO. 1 2 3 4 5 6 7 8 9 10 11 12 PART NO. KANRI NO. 8A-NSY-001-010 8A-NSY-002-010 8A-NSY-003-010 8A-NSY-004-010 8A-NSY-005-010 8A-NSJ-006-010 8A-NS6-604-010 8A-NS0-604-010 88-NS5-610-010 88-NS5-611-010 8A-NSY-011-010 8A-NSY-012-010 DESCRIPTION PANEL,FR R PANEL,FR L PANEL,BA R PANEL,BA L GRILLE,FRAME ASSY BADGE,AIWA S35 SPKR,W 200 SPKR,M 120 CORD,SPKR CORD,SPKR B/L RING,W COVER, REAR
ACCESSORIES / PACKAGE LIST
REF. NO. 1 1 1 2 3 4
PART NO.
!
KANRI NO. 8A-NF7-905-010 8A-NF7-906-010 8A-NF7-907-010 87-006-225-010 87-A90-118-110 8Z-NF8-702-010
DESCRIPTION IB,K(E)E IB,EZ(9L)E 70(NO RDS)<70EZ> IB,EZ(9L)E 72&73(RDS)<72,73EZ> AM LOOP ANT NC2 ANT,WIRE FM (Z) RC UNIT,RC-ZAS01
- 36 -
211, IKENOHATA 1CHOME, TAITO-KU, TOKYO 110, JAPAN TEL:03 (3827) 3111
9820572 0251431 Printed in Singapore