Text preview for : HK1810-TE.pdf part of MAKITA HK1810-TE MAKITA HK1810-TE.pdf
Back to : HK1810-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. HK1810
New Tool
Description Power Scraper
CONCEPTION AND MAIN APPLICATIONS 315
Model HK1810 is equipped with a variable speed function which
HK1800 does not have.
Hammering power can be adjusted so the operation range is wide in
192
various construction site such as small chipping work, peeling off of 85
joints, installation work of glass, waterproofing work, plastering work,
and all that.
Specifications
Continuous Rating (W) Max.
Voltage (V) Current (A) Cycle (Hz) Output(W)
Input Output
100 5.2 50/60 505 180 400
115 4.5 50/60 505 180 400
200 2.6 50/60 505 180 400
220 2.4 50/60 505 180 400
240 2.2 50/60 505 180 400
Blows per minute 0 - 3200 /min
Overall length Outer diameter 12 x length 40 mm
(same as HK1800)
Net weight 3.2kg (7lbs)
Power supply cord 5m (16.4ft)
Standard equipment
Scaling chisel 30-50, Scaling chisel 50-150, Bull point 13-220, Hex. wrench
Optional accessories
Scaling chisel 30-150, Scaling chisel 50-150, Bull point 13-220, Grooving chisel 8-170,
Grooving chisel 12-170, Hammer grease (contains 30g), Protector glasses
Features and benefits
Variable speed change function enables optimum setting of hammering power so that even the soft material
can be chaplet work without scratching or damaging.
Other features are same as HK1800 ( See document NEW TOOL INFORMATION BL- 1039.)
Comparison chart and the procedures for repair work is same as #HK1800.