Text preview for : 60030-WW-1.pdf part of MAKITA 60030-WW-1 MAKITA 60030-WW-1.pdf
Back to : 60030-WW-1.pdf | Home
T
ECHNICAL INFORMATION
Subject Modification of Handle Cover
60030
For Models 5026D, 5036D, 5046D, 5621D, 5621RD
Country All countries
Description As illustrated below, one of the holes for tapping screw has been modified
for smoother elevation of Motor Housing for depth adjustment.
Modified hole Handle Cover
Motor Housing
Lever 42
Current New
Part No. 416691-1 417170-2
Depth A Depth A 4.0mm 3.6mm
Depth A has been reduced by 0.4mm. (See the figure on left.)
Due to this modification, Handle Cover and Motor Housing
can be joined more firmly for smoother action of Lever 42.
Magnified view of the modified hole
(view from the battery side)
Interchangeability(I/C)
Item No. Current part Q'ty I/C New part Q'ty Note
5026DW: 005 Handle Cover Handle Cover The current part can be used for
5036DW: 005 416691-1 1 417170-2 1
the repair of 5621D / 5621RD.
5046DW: 005 But Always use the new part for
5621DW: 004 5026D / 5036D / 5046D.
5621RDW: 017
Note
Interchangeability mark ; means that the new part is substituted for the current.
Implementation
Machines manufactured in Japan Machines manufactured in U.S.A.
5026D : From serial No.1013E (Feb.,2000) 5026D : From the initial production
5036D : From serial No.1017E (Feb.,2000) 5036D : From the initial production
5046D : From serial No.1013E (Feb.,2000) 5046D : From the initial production
5621D : From serial No.1131E (Feb.,2000) 5621D : From serial No.2313A (Sept.,1999)
5621RD : From serial No.7869E (Feb.,2000)