Text preview for : 2MC-002.pdf part of Kyocera 2MC-002 Kyocera Printer FS-3540_3640MFP SERVICEBULLETIN 2MC-002.pdf
Back to : 2MC-002.pdf | Home
Service Bulletin
SB Number: SB 2MC-002 Creation Date: 28/02/2012
Subject: Firmware upgrade (Main v004.006/004.004 and MMI v004.008)
Model: FS-3540MFP/3640MFP, C2526MFP/2626MFP
Contents of changes
1 The Maintenance mail can now be sent when the Machine is in sleep mode. (FS-C2526MFP/2626MFP only)
2 The Catalan Optional panel language is now supported.
3 The Gloss mode option has been renamed as follows: (FS-C2526MFP/2626MFP only)
From High/Low to On/Of
4 The MP Paper size and Media type selection screen have been improved as follows:
1. The MP Tray paper size and Media type can now be changed at the Paper selection screen of the
Copy screen.
2. The MP tray paper size and Media type can now be changed at the Paper empty screen.
5 System error may appear when printing, while storing about 4.000 lines of PCL Macro data.
6 Scan may fail when scanning a large number of originals, after starting up the Computer.
7 The acquisition of the Copy counter information may fail, when using the HyPAS application (Pcounter).
8 The message "Cannot recognize the ID card reader" may be displayed as the sub message, even if the ID
card reader is disconnected when executing Equitrac application activation.
9 Sender information may be skipped from the Recipients output data, when sending the Fax if the
Job Account setting is ON, while the name is not defined at the extensible authentication.
10 Error code CF264 may appear, when printing PCL macro data from CF cards.
11 LF code may be ignored during SMB protocol printing.
12 The weekly timer may not function, when the Summer time (Daylight saving time) has been activated.
13 The Command Center settings may not be changed.
Classification Entire stock rework X In-field modification by case No modification necessary
In-field modification at next visit
Field measure When the above mentioned phenomena occur, please upgrade the firmware to the latest
version.
Firmware for the FS-3540MFP/3640MFP
Type Program No. Check SUM Version Status Date Applicable model(s)
MAIN 2MC_2F00004004 ---- 004.004 25/10/2011 FS-3540MFP
MAIN 2MD_2F00004004 ---- 004.004 25/10/2011 FS-3640MFP
MMI 2MC_7000004008 ---- 004.008 ---------- FS-3540MFP/ 3640MFP
ENGINE 2MC_1000003002 ---- 003.002 ---------- FS-3540MFP/ 3640MFP
SCANNER 2MC_1200003001 ---- 003.001 ---------- FS-3540MFP/ 3640MFP
FAX BOOT/APL 2KX_5500007001 ---- 007.001 ---------- FS-3640MFP
Note: Please upgrade all the firmware at the same time.
KMIS Service Department, Kyocera Mita Europe Page of 3 B464-B465/ SB 2MC-002
Service Bulletin
Firmware for the FS-C2526MFP/2626MFP
Type Program No. Check SUM Version Status Date Applicable model(s)
MAIN 2M8_2F00004006 ---- 004.006 16/11/2011 FS-C2526MFP
MAIN 2M9_2F00004006 ---- 004.006 16/11/2011 FS-C2626MFP
MMI 2M8_7000004008 ---- 004.008 ---------- FS-C2526MFP/2626MFP
ENGINE 2KW_1000011002 ---- 011.002 ---------- FS-C2526MFP/2626MFP
SCANNER 2M9_1200003001 ---- 003.001 ---------- FS-C2526MFP/2626MFP
FAX BOOT/APL 2KX_5500007001 ---- 007.001 ---------- FS-C2626MFP
Note: Please upgrade all the firmware at the same time.
4. The MP Paper size and Media type selection screen have been improved.
1. The MP Tray paper size and Media type can now be changed at the Paper selection screen of the
Copy screen. Previously the MP Tray paper size and Media type could only be set at the System menu.
Select [Paper Selection] at the Copy screen. Select [MP tray].
Change [Paper size] and [Media Type].
KMIS Service Department, Kyocera Mita Europe Page 2 of 3 B464-B465/ SB 2MC-002
Service Bulletin
2. The MP tray paper size and Media type can now be changed at the Paper empty screen.
Select [Paper Selection]. Select [MP tray].
Change [Paper size] and [Media Type].
KMIS Service Department, Kyocera Mita Europe Page 3 of 3 B464-B465/ SB 2MC-002