Text preview for : шасси L63A(P)-.pdf part of Samsung шасси L63A(P)- Samsung LCD TV SP43L2H SP43L2HX шасси L63A(P)-.pdf
Back to : шасси L63A(P)-.pdf | Home
Alignment and Adjustments
1-12 ASSEMBLY
1-12-1 ASSY COVER P-FAN
ASSY COVER P-FAN Separation :
Remove the 3 screws securing the COVER-DUCT, TOP.
ASSY COVER P-FAN Separation :
Pull out the screws while holding and pressing on the HOOK of the HOLDER-FILTER.
1-8 Samsung Electronics
Alignment and Adjustments
ASSY COVER P-FAN Separation :
Pull out the HANDLE-FILTER in the direction shown in the figure.
ASSY COVER P-FAN Separation :
Lift up the COVER-DUCT TOP with your hand in order to pull out the FAN.
Samsung Electronics 1-9
Alignment and Adjustments
ASSY COVER P-FAN Separation :
Pull out the FAN and let go of the COVER-DUCT TOP .
1-10 Samsung Electronics
Alignment and Adjustments
1-12-2 LAMP_BALLAST
LAMP CONNECTOR Separation :
6003-000335 SCREW-TAPTITE :RH,+2S,M3,L8,ZPC(YEL)SWRCH18A 4EA
Remove the 4 screws in order to pull out the LAMP_BALLAST CONNECTOR
LAMP CONNECTOR Separation :
Pull out the connector connected to the LAMP-BALLAST and the LAMP (Left Figure), and lift it up to
separate the two parts.(Right Figure)
Samsung Electronics 1-11
LAMP CONNECTOR Separation :
Remove the 4 screws securing the LAMP-BALLAST.
Remove the ON/OFF CABLE inserted in the LAMP-BALLAST.
LAMP CONNECTOR Separation :
Remove the LAMP-BALLAST, and replace it.
Alignment and Adjustments
1-12-3 ASSY PCB S-LCD DRIVER
COVER-LENS Separation :
Remove the marked screws.
COVER-LENS Separation :
BP63-00039A COVER-LENS : HIPS VO BLACK
Pull out the COVER-LENS in upward direction as shown in the figure.
Samsung Electronics 1-13
Alignment and Adjustments
ASSY MISC P-SHIELD-CASE,TOP Separation :
6003-000335 SCREW-TAPTITE :RH,+2S,M3,L8,ZPC(YEL)SWRCH18A
Remove the 4 marked screws.
ASSY MISC P-SHIELD-CASE,TOP Separation :
ABP96-00186A SSY MISC P-SHIELD-CASE,TOP
Hold both sides of the ASSY MISC P-SHIELD-CASE TOP and pull it out in the direction of the arrow to
separate it.
1-14 Samsung Electronics
Alignment and Adjustments
LCD-PANEL Separation :
Separate the 3 marked parts of PANEL R,G,B.
Refer to the figure for details.
LCD PANEL Separation :
Separate each PANEL HOLDER
Refer to the figure for details.
LCD PANEL Separation :
Push both sides of each PANEL HOLDER in
direction of the arrow in the figure to separate it.
Samsung Electronics 1-15
Alignment and Adjustments
LCD PANEL Separation :
A figure showing three separated panels
ASSY PCB S-LCD DRIVER Separation :
6003-000365 SCREW TAPTITE : BH S M3 L8 ZPC(YEL) SWRCH18A 4EA
Remove the 4 marked screws.
1-16 Samsung Electronics
Alignment and Adjustments
ASSY PCB S-LCD DRIVER Separation :
Hold both sides of the ASSY MISC P-SHIELD-CASE BOT and pull it out upward in the direction of arrow
to separate it.
ASSY PCB S-LCD DRIVER Separation :
6003-000335 SCREW-TAPTITE :RH,+2S,M3,L8,ZPC(YEL)SWRCH18A 4EA
Remove the 4 marked screws.
Samsung Electronics 1-17
Alignment and Adjustments
ASSY PCB S-LCD DRIVER Separation :
BP94-00474A ASSY PCB S-LCD DRIVER 1EA
Pull out the ASSY PCB S-LCD DRIVER.
1-12-4 FAN(FAN-BALLAST)
FAN-BALLAST Separation :
Remove the 2 screws securing the HOLDER-BALLAST.
1-18 Samsung Electronics
Alignment and Adjustments
FAN-BALLAST Separation :
Pull out the ASSY BALLAST as shown in the figure.
FAN-BALLAST Separation :
Remove the 2 HOLDER screws securing the FAN.
Samsung Electronics 1-19
Alignment and Adjustments
FAN-BALLAST Separation : FAN-BALLAST Separation :
Remove the 2 screws securing the FAN. Pull out the FAN as shown in the figure and
replace it with a new one.
1-12-5 FAN(FAN-LAMP)
FAN-LAMP Separation : FAN-LAMP Separation :
Remove the 2 screws Turn the HANDLE-LAMP by 90