Text preview for : DF60_SM.PDF part of Unitc DF60 SM . Rare and Ancient Equipment Unitc Copiers UNITC406 OPTIONS DF60_SM.PDF
Back to : DF60_SM.PDF | Home
DUAL JOB FEEDER
(Machine Code: A376)
28 December 1993 SPECIFICATIONS
1. SPECIFICATIONS
Original Feed Mode: Automatic document feed mode
Automatic reverse document feed mode
Semi-automatic document feed mode
Mixed sized mode (Not applicable with the A109)
Pasted original mode (Not applicable with the
A109)
Preset mode
Combine originals mode
Original Size, Weight and
Table Capacity:
40.7
46.5 52.8 64.0 81.4 104.7 128.0
Paper Weight g/m2
11 lb 12.5 14 17 22 28 34
Maximum number of
50 50 50 50 50 30 25
originals to be set
A3 lengthwise p p q q q r p
A4 lengthwise p p q q q r p
A4/A3 version
A4 sideways p p q q q r p
A5 sideways p p r r r r p
B4 lengthwise p p q q q r p
B5 lengthwise p p q q q r p
B5sideways p p q q q r p
F (8" x 13") lengthwise p p q q q r p
11" x 17" lengthwise p p q q q r p
81/2 x 14" lengthwise p p q q q r p
81/2 x 11" lengthwise p p q q q r p
81/2 x 11" sideways p p q q q r p
51/2" x 81/2" lengthwise p p r r r r p
LT/DLT version
51/2" x 81/2" sideways p p p p p p p
8" x 13" (F) lengthwise p p q q q r p
81/2 x 13" (F4)
p p q q q r p
lengthwise
8" x 101/2" lengthwise p p q q q r p
8" x 10" lengthwise p p q q q r p
8" x 10" sideways p p q q q r p
Dual Job
Feeder
10" x 14" lengthwise p p q q q r p
11" x 15" lengthwise p p q q q r p
q: Mixed Original mode
Preset mode
ADF mode (1 sided originals mode)
ARDF mode (2 sided original(s) mode)
SADF mode
r: ADF mode, ARDF mode, SADF mode
p: ADF mode, SADF mode
1
SPECIFICATIONS 28 December 1993
Original Standard Position: Rear left
Original Separation: Feed and friction belt
Original Transport: One flat belt
Power Source: DC24V from the copier, 2.0A (average)
Power Consumption: 70W
Dimensions (W x D x H): 680 x 508 x 116mm
(26.8" x 20.0" x 4.6")
Weight: 13kg (28.7lb)
2
28 December 1993 COMPONENT LAYOUT
2. COMPONENT LAYOUT
2.1 MECHANICAL COMPONENT LAYOUT
1 2 3 4 5 6 7
12 11 10 9 8
1. Friction Belt 7. Inverter Pawl
2. Original Stopper 8. Inverter Roller
3. Press Roller 9. Transport Belt
4. Side Fence 10. Pick-up Rollers
5. Original Table 11. Pull-out Roller
6. Exit Roller 12. Feed Roller
Dual Job
Feeder
3
ELECTRICAL COMPONENT DESCRIPTION 28 December 1993
3. ELECTRICAL COMPONENT DESCRIPTION
Refer to the electrical component layout on the reverse side of the attached
Point to Point for symbols and index numbers.
Symbol Name Function Index
No.
Motors
M1 Feed-in Drives the feed-in system 1
(pick-up, feed, pull-out rollers,
separation belts)
M2 Belt Drive Drives the transport belt. 2
M3 Feed-out Drives the feed-out and the 5
inverter system.
Sensors
S1 DF Position Informs the CPU when the DJF 7
is being closed so that original
size detection sensors can
check the original size.
S2 Feed-out Checks for original misfeeds and 8
sets original stop timing when in
auto-reverse mode.
S3 Registration