Text preview for : 5-rh10servtools.pdf part of NOKIA 5-rh10servtools NOKIA Mobile Phone 8280 5-rh10servtools.pdf
Back to : 5-rh10servtools.pdf | Home
CCS Technical Documentation
RH-10 Series Transceivers
Service Tools
Issue 1 09/2002 Confidential Nokia Corporation
RH-10
Service Tools CCS Technical Documentation
Page 2 Nokia Corporation Confidential Issue 1 09/2002
RH-10
CCS Technical Documentation Service Tools
Contents
Page No
Service Tools List .......................................................................................................... 5
Flashing and Testing Setup .......................................................................................... 11
POS Flash Setup 1 .....................................................................................................11
Flashing, testing, tuning with covers on (Setups 2a, 2b, 2c, 2d) ...............................12
Service Setup 2a ........................................................................................................13
Service Setup 2b ........................................................................................................14
Service Setup 2c ........................................................................................................15
Service Setup 2d ........................................................................................................16
Issue 1 09/2002 Nokia Corporation Confidential Page 3
RH-10
Service Tools CCS Technical Documentation
Page 4 Nokia Corporation Confidential Issue 1 09/2002
RH-10
CCS Technical Documentation Service Tools
Service Tools List
JBV-1 Docking Sta- 0770298 The Docking Station is needed
tion for MBus, Fbus, RF, and audio
connections. This setup allows
connection between flash prom-
mers. When the audio box is
connected, it has to be con-
nected to the phone's audio con-
nector. The Docking Station can
be powered by FPS-8 or external
power supply.
DA-5 Docking Station 0770523 Works in concert with JBV-1
Adapter Docking Station.
FLA-47 Flash Adapter 0770508 Flash Adapter allows continuous
maximum power supply for the
phone from an external power
supply. The Flash Adapter allows
Mbus/Fbus connections. The
Flash Adapter is protected
against over-voltage, over-cur-
rent, and cross-connection. The
Flash Adapter provides a regu-
lated voltage to the phone.
Note: The flash adapter is
designed for flashing only.
Issue 1 09/2002 Nokia Corporation Confidential Page 5
RH-10
Service Tools CCS Technical Documentation
MJS-59 Module Jig 0770366 The purpose of the MJS-59 mod-
ule service jig is to provide a
method of component-level test-
ing, by applying voltage from an
external power supply when the
phone engine is out of its
mechanics. The engine module
and UI module of RH-10 can be
tested with MJS-59.
RF connection is established
through a replaceable GAC-5
connector. Two SMA-type con-
nectors are available for audio
testing using ADS-7 cables. This
type of connection eliminates
the need for external audio split-
ter.
Note: The nominal supply voltage
for the MJS-59 is +4.1V. The sup-
ply voltage must not exceed
+5.0V.
FPS-8 Flash Prommer 0080321 The Flash Prommer FPS-8 is used
for heavy flash.
Includes ACF-8 AC charger
(0680032).
Includes AXS-4 D9-D9 cable
(0730090).
ADS-6 Audio Cable 0730241 The Audio Cable connects to the
Audio Box JBA-8.
ADS-7 Audio Cable 0730261 ADS-7 Audio Cable is for use
with MJS-59 Module Jig. Audio
is split at the module jig, elimi-
nating the need for a separate
audio box in this configuration.
Page 6 Nokia Corporation Confidential Issue 1 09/2002
RH-10
CCS Technical Documentation Service Tools
JBA-8 Audio Box 0770320 The JBA-8 is required for audio
testing.
XCS-4 Mbus/Fbus 0730178 The XCS-4 Service Cable is a
Cable modular cable for flashing DCT4
products when using FPS-8.
XRS-6 RF Cable 0730231 RF Cable XRS-6 is used to con-
nect the service tools to RF
measuring equipment.
AXP-8 Printer Cable 073F000 The Parallel Printer Cable con-
nects the parallel connector of
the PC and the parallel input of
the FPS-8.
SCB-3 DC Cable 0730114 The DC Cable SCB-3 is used to
connect the Service Box to the
charger connection Vin of the
phone when doing the charger
calibration service procedure.
Issue 1 09/2002 Nokia Corporation Confidential Page 7
RH-10
Service Tools CCS Technical Documentation
DAU-9S MBus Cable 0730108 The Mbus Cable DAU-9S has a
modular connector, used with
the MJS-59 Module Jig.
PCS-1 Power Cable 0730012 The Power Cable PCS-1 is used to
connect the MJS-59 Module Jig
to an external power supply.
XCS-1 Interface Cable 0730218 The Interface Cable XCS-1 is
used to connect the FLS-4S don-
gle to an FLS adapter. It provides
data connection as well as
power.
0770543 IDI type of test probe pins for
DA-5 and FLA-47, S-0-J-2.2-G.,
bag of 10
FLS-4S POS Flash 0080543 The Point of Sale (POS) Flash is a
low-cost software upgrade tool.
This requires the XCS-1 Interface
Cable, FLA-47 Flash Adapter, and
ACP-8U Power Supply for opera-
tion.
Page 8 Nokia Corporation Confidential Issue 1 09/2002
RH-10
CCS Technical Documentation Service Tools
PKD-1 SW Security 0750018 SW Security Device is a piece of
Device hardware enabling the use of the
service software when connected
to the LPT (parallel port) of the
PC. A dongle is required for use
of the service software. A printer
or any such device can be con-
nected to the PC through the
dongle, if needed.
Cautions: Make sure that you
have switched off the PC and the
printer before making connec-
tions. Do not connect the PKD-1
to the serial port. You may dam-
age your PKD-1.
JBU-11 Docking Sta- 0775294 The Docking Station and RF
tion Adapter RC1 are needed for
Mbus, Fbus, and RF connections.
The Docking Station also may be
used without RC1 if RF output is
not desired. The Docking Station
may be powered by the FPS-8
setup or by an external power
supply.
Note: Toggle the DC power supply
switch to correct mode before
applying power.
RC1 RF Adapter 0775296 Used with the Docking Station
JBU-11, above. The RC1 uses the
GAC-5 for RF interface.
XRS-5 RF Connector 0730228 XRS-5 (shown at left in drawing)
is used for readings, in conjunc-
tion with the BBS-10 service
battery.
Note: Use with protection grom-
met, pictured at lower right.
GAC-5 RF Connector 0770473 GAC-5 is used with JBU-11/RC1
and MJS-59 to make RF connec-
tions. This connector is included
with both tools; however, it is
available separately as a user-
replaceable part in the event of
damage. The connector and both
jigs are designed to accept a
micro in-line attenautor. This
permits attenuation as close to
the source RF as possible.
Issue 1 09/2002 Nokia Corporation Confidential Page 9
RH-10
Service Tools CCS Technical Documentation
Flashing and Testing Setup
POS Flash Setup 1
Item Name Type Code
1 POS Flash Adapter FLA-47 0770508
2 Interface Cable XCS-1 0730218
3 AC Charger ACP-8F 0680032
4 POS Flash dongle FLS-4S 0080543
Software
Page 10 Nokia Corporation Confidential Issue 1 09/2002
RH-10
CCS Technical Documentation Service Tools
Flashing, testing, tuning with covers on (Setups 2a, 2b, 2c, 2d)
Tightened performance specifications require more precise equipment and methods for
testing and alignment. Manual tuning can't provide accurate results for RH-10 products,
which means that this task has to be automated.
These setups are intended to be used either with Phoenix or Darium SW. With the Phoe-
nix SW, it is possible to do manual testing and automated tuning. With Darium, it is pos-
sible to do automated testing and tuning.
Issue 1 09/2002 Nokia Corporation Confidential Page 11
RH-10
Service Tools CCS Technical Documentation
Service Setup 2a
Item Name Type Code
1 POS Flash Adapter FLA-47 0770508
2 Power Cable (included in FLA-47 FLC-2 0730185
sales pack)
3 Mbus/Fbus Cable XCS-4 0730178
4 Flash Prommer FPS-8 0080321
5 Printer cable (included in FPS-8 sales pack) 073F000
6 D9-D9 cable (included in FPS-8 sales pack) 0730090
7 SW Security Device PKD-1 0750018
8 AC charger ACP-8F 0680032
Page 12 Nokia Corporation Confidential Issue 1 09/2002
RH-10
CCS Technical Documentation Service Tools
Service Setup 2b
Item Name Type Code
1 Docking Station JBV-1 0770298
Docking Station Adapter DA-5 0770523
2 Power Cable PCS-1 0730012
3 Mbus/Fbus Cable XCS-4 0730178
4 Flash Prommer FPS-8 0080321
5 Printer cable (included in FPS-8 sales pack) 073F000
6 D9-D9 cable (included in FPS-8 sales pack) 0730090
7 SW Security Device PKD-1 0750018
8 AC charger ACP-8F 0680032
Issue 1 09/2002 Nokia Corporation Confidential Page 13
RH-10
Service Tools CCS Technical Documentation
Service Setup 2c
Item Name Type Code
1 Module Jig MJS-59 0770366
2 Power Cable PCS-1 0730012
3 RF Cable XRS-6 0730231
4 MBus Cable DAU-9S 0730108
5 SW Security Device PKD-1 0750018
Page 14 Nokia Corporation Confidential Issue 1 09/2002
RH-10
CCS Technical Documentation Service Tools
Service Setup 2d
Item Name Type Code
1 Docking Station JBV-1 0770298
2 Docking Station Adapter DA-5 0770523
3 RF Connector GAC-5 0770473
4 DC Cable SCB-3S 0730114
5 RF Cable XRS-6 0730231
6 Power Cable PCS-1 0730012
7 MBus Cable DAU-9S 0730108
8 SW Security Device PKD-1 0750018
Issue 1 09/2002 Nokia Corporation Confidential Page 15
RH-10
Service Tools CCS Technical Documentation
Page 16 Nokia Corporation Confidential Issue 1 09/2002