TEAC CD-W540E.pdf part of teac CD-W540E TEAC CD-W540E.pdf, teac TEAC CD-W540E.pdf text manual preview

Text preview for : TEAC CD-W540E.pdf part of teac CD-W540E teac TEAC CD-W540E.pdf

Back to : TEAC CD-W540E.pdf | Home

CD-W540E
CD-RW Drive
User's Manual

40x12x48
Internal IDE Drive
Safety Precautions
TEAC CD Rewritable (CD-RW) Drives are high-precision electronic devices. Do not use
them in any manner other than as specified in this manual. Please read this manual in its
entirety before you begin the installation procedure. Use of controls, adjustments, or
performance of procedures other than those specified herein may result in hazardous
radiation exposure.
To prevent fire or shock, do not expose the unit to moisture or rain.
To prevent electrical shock, do not attempt to disassemble the CD-RW drive. Refer
servicing to authorized personnel.
The CD-RW drive utilizes a laser beam that can be harmful to the eyes. Do not disassemble
the cabinet or unit. Do not attempt to look through the front panel or into the unit while the
power is turned on.
A user who changes or modifies the unit or operating procedures specified herein without
express written approval by the manufacturer will void user authority to operate the
equipment.
Specifications and features subject to change without notice or obligation.

FCC Radio Frequency Interference Regulations
Warning: This equipment generates, uses, and can radiate radio frequency energy and if
not installed and used in accordance with the instructions contained in this manual, may
cause harmful interference to radio and television communications. This equipment has
been tested and found to comply with the limits for a Class B digital device pursuant to
Subpart J of Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. However, there is no
guarantee that interference will not occur in a particular installation. To ensure compliance
with FCC rules, the cable that connects the unit to the computer must be a shielded interface
cable.
Note: Connecting this device to peripheral devices that do not comply with Class B
requirements or using an unshielded peripheral cable could result in interference to radio
or television reception. To ensure that the use of this product does not contribute to
interference, use a shielded interface cable.
If this equipment does cause harmful interference to radio or television reception (which
can be determined by turning the equipment off and on), the user may try to correct the
interference by one or more of the following measures: