Text preview for : 07-dtx-3-servtool.pdf part of NOKIA 07-dtx-3-servtool NOKIA Mobile Phone 32 07-dtx-3-servtool.pdf
Back to : 07-dtx-3-servtool.pdf | Home
Customer Care Solutions
DTX-3 Series Transceivers
Service Tools
Issue 1 4/03 Nokia Corporation
DTX-3
Service Tools CCS Technical Documentation
Table of Contents
Page No
Flash Loading Adapter FLA-7 .....................................................................................3
Flash Prommer FPS-4 (Sales Pack) .............................................................................4
Security Box TDF-4 ....................................................................................................5
DC Power Cable SCF-7 ...............................................................................................6
D9-D9 Cable AXS-4 ....................................................................................................7
D15-D15 Cable AXS-5 ................................................................................................8
Service Cable DKT-6A ................................................................................................9
Line Adapter Test cable SCS-24 ...............................................................................10
SW Security Device PKD-1 .....................................................................................11
Power Cable PCC-1B ................................................................................................12
Modular T-Adapter ....................................................................................................13
MBUS Cable DKT-7A ..............................................................................................14
Page 2 Nokia Corporation Issue 1 4/03
DTX-3
CCS Technical Documentation Service Tools
Flash Loading Adapter FLA-7
The flash loading adapter FLA-7 is used in MCU SW upgrade. Service cable DKT-6A is also
needed.
Power is supplied to FLA-7 from ACH-6E charger. Power for the FPS-4 can be connected
via FLA-7 by SCF-7 DC power cable.
The adapter is connected to the flash prommer FPS-4 by the AXS-5 cable and to the
security box TDF-4 by the XCM-1 cable.
Product Code
Flash Loading Adapter FLA-7: 0770119
Figure 1: View of FLA-7
Issue 1 4/03 Nokia Corporation Page 3
DTX-3
Service Tools CCS Technical Documentation
Flash Prommer FPS-4 (Sales Pack)
The flash prommer FPS-4 is used to update the main software of the phone. Updating is
done by first loading the new MCU software from the PC to the flash prommer, and then
loading the new SW from the prommer to the phone. When updating more than one
phone in succession, the MCU soft ware only needs to be loaded to the prommer once.
The sales pack includes:
- Charger ACS-2 4624582
- Printer Cable 0730029
- D9 - D9 Cable AXS-4 0730090
- AXD-1 DC-Cable 0730144
- SW disc 0774228 and 0774043
Note! Due to hardware changes in RPM-3 product installation software has been
updated to contain RPM-3 specific files. Make sure that you have newest FPS-4 software
before you start setting up SW upgrade equipment.
Product Code
Flash Prommer FPS-4: 00750090
Figure 2: View of FPS-4
Page 4 Nokia Corporation Issue 1 4/03
DTX-3
CCS Technical Documentation Service Tools
Security Box TDF-4
The security box TDF-4 is required for updating MCU software, and infra red testing.
Note: TDF-4 is delivered in de-activated mode.
Fill in the enclosed Activation Request Form, and fax to NMP Salo to get the activation
code.
Product Code
Security Box TDF-4: 0770106
Figure 3: View of TDF-4
Issue 1 4/03 Nokia Corporation Page 5
DTX-3
Service Tools CCS Technical Documentation
DC Power Cable SCF-7
The DC power cable SCF-7 is used for connecting power from ACL-3 charger via FLA-7 to
FPS-4.
Product Code
DC Power Cable SCF-7: 0730141
Figure 4: View of SCF-7
Page 6 Nokia Corporation Issue 1 4/03
DTX-3
CCS Technical Documentation Service Tools
D9-D9 Cable AXS-4
The D9-D9 cable AXS-4 is used to connect two 9-pin D-connectors, for example,
between PC and TDF-4 security box. The D9-D9 cable AXS-4 is used to connect TDF-4
security box to FPS-4 Flash Prommer.
Product Code
D9 - D9 Cable AXS-4: 0730090
Figure 5: View of AXS-4
Issue 1 4/03 Nokia Corporation Page 7
DTX-3
Service Tools CCS Technical Documentation
D15-D15 Cable AXS-5
The D15-D15 cable AXS-5 is used to connect two 15-pin D-connectors, for example,
between FLA-7 and FPS-4.
Product Code
D15-D15 Cable AXS-5: 0730091
Figure 6: View of AXS-5
Page 8 Nokia Corporation Issue 1 4/03
DTX-3
CCS Technical Documentation Service Tools
Service Cable DKT-6A
Service Cable DKT-6A is used to connect FLA-7 to DTX-3.
One connector a 6-pin modular connector, the other is a 10-pin modular connector.
Product Code
Modular Cable DKT-6A: 0730213
Figure 7: View of DKT-6A
Issue 1 4/03 Nokia Corporation Page 9
DTX-3
Service Tools CCS Technical Documentation
Line Adapter Test cable SCS-24
Line Adapter Test Cable SCS-24 is connected between trunk connector and T-adapter
when testing the Nokia 32 Application Module. It consists of 50 cm flat 6-core cable
with a 6-pin modular connector at each end
Product Code
Line Adapter Test Cable SCS-24 0730223
Figure 8: View of SCS-24
Page 10 Nokia Corporation Issue 1 4/03
DTX-3
CCS Technical Documentation Service Tools
SW Security Device PKD-1
SW security device is a piece of hardware enabling the use of the service software when
connected to the parallel (LPT) port of the PC. Without the dongle present it is not possi-
ble to use the service software. Printer or any such device can be connected to the PC
through the dongle if needed.
Caution: Make sure that you have switched off the PC and the printer before mak-
ing connections!
Caution: Do not connect the PKD-1 to the serial port. You may damage your PKD-
1!
Product Code
SW Security Device PKD-1: 0750018
Figure 9: View of PKD-1
Issue 1 4/03 Nokia Corporation Page 11
DTX-3
Service Tools CCS Technical Documentation
Power Cable PCC-1B
Power Cable PCC-1B is used to connect the DTX-3 application module with the Flash
Loading Adapter.
Product Code
Power Cable PCC-1B: 0770050
Figure 10: View of PCC-1B
Page 12 Nokia Corporation Issue 1 4/03
DTX-3
CCS Technical Documentation Service Tools
Modular T-Adapter
Modular T-Adapter is used in testing the Nokia 32 Application module. SCS-24 Line
Adapter Test Cable from trunk Connector and CA-15DS Line Adapter test cable from
extension connector are connected to the T-Adapter during loop test. DKT-7A MBUS
Cable is also connected to the T-connector to make the connection to PC.
Issue 1 4/03 Nokia Corporation Page 13
DTX-3
Service Tools CCS Technical Documentation
MBUS Cable DKT-7A
Service MBUS cable connects the PC to the T-Adapter when testing the Nokia 32 Appli-
cation Module.
Product Code
MBUS Cable DKT-7A: 0730211
Figure 11: MBUS Cable DKT-7A
Page 14 Nokia Corporation Issue 1 4/03
DTX-3
CCS Technical Documentation Service Tools
Line Adapter Test Cable CA-15DS
Line adapter test cable CA-15DS is connected between extension and T-connector
(4626134) when testing the Nokia 32. It consists of 50cm of flat 6-core cable with 6-pin
modular connector at each end.
Product Code
Line Adapter Test Cable CA-15DS: 0730302
Figure 12: Line Adapter test cable CA-15DS
Issue 1 4/03 Nokia Corporation Page 15
DTX-3
Service Tools CCS Technical Documentation
[This page intentionally left blank.]
Page 16 Nokia Corporation Issue 1 4/03