Text preview for : 4093D-TE.pdf part of MAKITA 4093D-TE MAKITA 4093D-TE.pdf
Back to : 4093D-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. 4093D
PRODUCT
P1/3
Description Cordless Cleaner W
CONCEPTION AND MAIN APPLICATIONS L
H
9.6V version of the existing Model 4073D, with higher capacity.
Its brief benefits are as follows.
* Integrated inlet is suitable form for cleaning floor, consequently
this cleaner can be operated without installing nozzle, too.
* Pipe is fit firmly to the machine.
The charger and battery are to be supplied separately from this machine.
Dimensions : mm ( " )
Width ( W ) 112 (4-3/8)
Height ( H ) 143(5-5/8)
Length ( L ) 484 (19)
965 (38) with pipe
Specification
High 1.0 m3/min.
Max air flow
Low 0.8 m3/min.
High 2.7 kPa (280mH2O)
Max sealed suction
Low 1.8 kPa (180mH2O)
Continuous operating time with High Approx. 13 minutes
full charged one battery pack Low Approx. 23 minutes
Capacity 500 mm3
Standard equipment
* Nozzle .......................... 1 pc.
* Pipe .......................... 1 pc.
* Crevice nozzle .............. 1 pc.
* Dust bag ........................ 1 pc.
* Paper filter .................... 1 pack (5 pcs. per pack.)
< Note > The standard equipment for the tool shown may differ from country to country.
Optional accessories
*Shelf nozzle *Battery 9000 *Charger DC1439
*Flexible hose *Battery 9002 *Charger DC1411
*Paper filter (10 pcs.per pack.) *Charger DC9710 *Charger DC1422
*Dust bag *Charger DC1470 *Charger DC1801
Features and benefits P2/3
So strong suction power as Mod.4073D
and besides, approx. 30% longer operating time
with one full charged battery pack.
Accepts either paper filter
bag or dust bag
Easy to attach and detach
battery 9000
< Note > Battery 9000 is
an optional accessory.
2 speed control switch
Pipe is fit firmly
to the machine.
Integrated inlet is suitable form
for cleaning floor, consequently
this cleaner can be operated
without installing nozzle, too.
Comparison of products
Specifications Model No. 4093D 4073D
Voltage ( V ) 9.6 7.2
Equipped motor Mabuchi RS550SH Mabuchi RS550SH
Paper filter pack available available
High mode 15 14
Suction rate ( W )
Low mode 7 5
Operating time High mode 13 min. 10 min.
with one full
charged battery Low mode 23 min. 20 min.
Net weight: Kg ( lbs ) 1.3 ( 2.9 ) 1.1 ( 2.4 )
Repair P3/3
< 1 > Removing fan 82
(1) Insert steel plate into the gap between fan and base.
(2) Hold the both end of steel plate.
(3) Remove motor by pressing down the motor shaft.
Press the motor shaft.
Motor shaft Fan 82
Steel plate Steel plate
Base
Motor
Fig. 1
< 2 > Assembling fan to motor
(1) Hold the motor shaft.
(2) Assemble base to the motor, and then assemble fan 82
to the motor shaft by pressing. 0.2m - 0.7mm
(3) Check the gap with thickness gauge, if its distance Fan 82
is 0.2m - 0.7mm.
If not, adjust it further, until the distance comes to
Base
the above mentioned size.
Motor
< 3 > Replacing hook and rod 2.5 Fig. 2
Assemble rod 2.5 to any of 2 hooks by pressing it. Hold here the motor shaft.
Rod 2.5
Hook
Fig. 3
< 4 > Fastening torque for tapping screws
Fastening torque for tapping screws has to be approx. 75Kgf.cm.
Over tightening is cause of damage on the threaded hole of housing set.
Circuit diagram
Resistor circuit
Red
1 2 3 4 Red
Red mark
Switch Red
DC motor
5 6 7 8
Black
Non sheathed
lead wire
Battery
Red holder