Text preview for : 6510B2-TE.pdf part of MAKITA 6510B2-TE MAKITA 6510B2-TE.pdf
Back to : 6510B2-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. 6510B-2
New Tool
Description MAKITA 10mm(3/8") 2-speed Dril
CONCEPTION AND MAIN APPLICATIONS
This machine has been developed according to our salesmen's
request for less expensive double transmission. The model is for
export only, and the works suitable for drill diameter or holing
materials can be done so that the efficiency is improved.
Specifications
Voltage (V) Current (A) Frequency (Hz) Continuous rating input (W)
Single phase 100 3.5 50-60 330
Electric motor series commutator motor
Rotation per minute High Speed/2300 rpm, Low Speed/950 rpm
Max. drilling capability Iron 10 mm
Wood 21 mm
Total length 285 mm
Net weight 1.6 kgs
Power supply cord 2.5m
Standard equipment
Chuck key complete S10
Features and benefits
(1) Because of double transmission, the works suitable for drill diameter or material can be done and efficiency
is improved.
(2) Since it is small and light, you can use it easily and the structure is double insulation which is safe
electrically.
(3) You can use it in wide range of works owing to the attachment method.
(4) You can keep or carry it because a carry hook is applied.
Capacity
Model 6510B-2 6000R 6510PBL
Material to be shaved
Drill diameter H (2300rpm) L (950rpm) (10~2600rpm) (1050rpm)
Soft steel 6.5 3.4 A 20 SEC 2.7 A 46 SEC A SEC A SEC
t=12mm 10 4 31 3.1 65 3.8 35 3.8 60
Cast iron 6.5 3.1 22 2.6 45
t=24mm 10 3.8 33 2.8 75 3.9 33 2.8 68
Aluminum 6.5 3 17 2.5 33
t=24mm 10 3.6 20 2.8 38 3.9 23 2.8 30
The standard equipment for the tools shown may differ form country to country.
Model 6510B-2
Material to be shaved
Drill diameter H L
A SEC
12 3.5 2 2.7 A 3 SEC
15 4 2 3 3
Lauan 18 4.8 2.5 3.1 3
t=60mm 21 5~6 3 3.8 4
24 6.5~7 4 3.8 4
30 Motor rock 5~5.5 5
12 3.7 2 2.8 4
15 4.2 2 3.2 4
Hemlock 18 5 2.5 35 4
t=60mm 21 6.2(7.5) 3 4(4.6) 4.5
24 6.5(8) 4 4(4.7) 4.5
30 Motor rock 5.2(6.5) 6
For drilling in metal ones, H is suitable. Comparing to #6000R,
H has higher efficiency.
The capacity in wood works: in high speed(H) 13mm, in low speed(L) 21mm,
in terms of load current and using feeling.
Note in assembly
a. Assembly procedure of Shifter and Spindle parts
(1) Attach Shifter part. Fig. -B Fig. -A
(2)Insert Spar gear 29
(3) Attach Spindle part (See Fig 1 )
b. Relation between Shifter and Rotation Display of Handle
When Handle is in the condition of Fig.II-A against Gear-housing, Fig 1
the relation between Handle and Shifter is shown as Fig.II-B.
Distinguish here
Fig. -A Fig. -B
c. Applying of Grease
Grease should be applied in Gear part as well as between Ring 16
and Pin 4.
(Total quantity of grease: 15 g)