Text preview for : TVCR2delta_dfu_14PV320_user_manual.rar part of Philips TVCR2delta dfu 14PV320 user manual Philips TV-VCR TVCR2delta_dfu_14PV320_user_manual.rar
Back to : TVCR2delta_dfu_14PV320_us | Home
CONTENTS
1. CONNECTING YOUR TV-VIDEO COMBI . . . . . . . . . . . . . . 4 Switching the On-screen display (OSD) on or off . . . . . 20
Connecting the cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Switching to 16:9 wide screen picture . . . . . . . . . . . . . . 20
Connecting a decoder or other equipment . . . . . . . . . . . . 4 Continuous playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Switch off function (SLEEP TIMER) . . . . . . . . . . . . . . . . . 21
2. INSTALLING YOUR TV-VIDEO COMBI . . . . . . . . . . . . . . . . 5
Switch on function (WAKE-UP TIMER) . . . . . . . . . . . . . . 21
Initial installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Allocating a decoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 9. Before you call an engineer . . . . . . . . . . . . . . . . . . . . . . . 22
Manual TV channel search . . . . . . . . . . . . . . . . . . . . . . . . . 6 Technical terms used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Satellite receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Special installation functions . . . . . . . . . . . . . . . . . . . . . . . 7
Automatic TV channel search . . . . . . . . . . . . . . . . . . . . . . 7
Channel Number Allocation . . . . . . . . . . . . . . . . . . . . . . . . 7
Delete a TV Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting the language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting the time and date . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3. IMPORTANT NOTES FOR OPERATION . . . . . . . . . . . . . . 10
SUMMARY OF USER GUIDE . . . . . . . . . . . . . . . . . . . . . . . 10
User guide (OSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4. TV SET FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Selecting a TV programme . . . . . . . . . . . . . . . . . . . . . . . . 11
Selecting the picture setting (SMART PICTURE) . . . . . . 11
Automatic volume control (AVL) . . . . . . . . . . . . . . . . . . . . 11
5. PLAYBACK FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Playing a cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Playing NTSC cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Tape position indication . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Searching for tape position with the picture (picture
search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Still picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Searching for tape position without the picture (wind
and rewind) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Instant View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Automatic search for a tape position (index search) . . 13
Picture interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Cleaning the video heads . . . . . . . . . . . . . . . . . . . . . . . . . 13
6. MANUAL RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Recording without automatic switch-off . . . . . . . . . . . . 14
Recording with automatic switch-off (OTR
one-touch-recording) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Protecting your recordings . . . . . . . . . . . . . . . . . . . . . . . . 14
Auto-assembling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
7. PROGRAMMED RECORDING (TIMER) . . . . . . . . . . . . . . . 16
'VPS' (Video Programming System) and 'PDC'
(Programme Delivery Control) . . . . . . . . . . . . . . . . . . . . . 16
Programming a recording (with 'VIDEOplus') . . . . . . . . 16
Programming a recording (without 'VIDEOPlus') . . . . . 17
How to check or change a TIMER . . . . . . . . . . . . . . . . . . 18
8. ADDITIONAL FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 19
How to read TELETEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Parental control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3
&
OPERATING INSTRUCTIONS IN BRIEF
The remote control PLAY G Playback : To play a recorded cassette
H Rewind : During STOP and STANDBY: rewind, during PLAYBACK: reverse
TELETEXT e TELETEXT: To switch TELETEXT on or off
scanning
STANDBY m Switch off : To switch off set, interrupt menu
STOP h Pause/Stop: To stop the tape, except while a TIMER-recording is being made
function, interrupt a programmed recording
(TIMER) I Forward wind: During STOP and STANDBY: forward wind, during
PLAYBACK: forward scanning
SMART (green) SMART PICTURE (green): To show the preset
picture settings INDEX E Index search: In combination with H / I : to search for
SMART #(yellow) No function previous/next recording on the cassette.
RECORD/OTR n Record: To record the programme selected
0-9 Number buttons: 0 - 9
STILL R Still picture: To stop the tape and show a still picture
CLEAR Delete : To delete last entry or clear
programmed recording (TIMER)
TIMER k TIMER: To make a manual TIMER
Coloured TELETEXT buttons:To select TELETEXT pages directly
programming or to alter or clear a
programmed TIMER (red) TELETEXT: Select page/chapter shown at the bottom of the screen
MENU Menu : To call up or end main menu (green) TELETEXT: Select page/chapter shown at the bottom of the screen
OK Store/Confirm: To store or confirm entry (yellow) TELETEXT: Select page/chapter shown at the bottom of the screen
P pAB Programme number: To select a programme (blue) TELETEXT: Select page/chapter shown at the bottom of the screen
number up or down
P rB Select: One line up
AP q Select: One line down
SpDC Volume: To regulate the volume
DSr Select: Cursor left
SqC Select: Cursor right
y Volume off: To switch the volume on or off
z Previous programme number: To select the
previous programme number
&
Front of the set Back of the set
EXT.1 Scart socket: To connect a satellite receiver, decoder, video recorder, etc.
8 Power switch : To switch off the set
Beware: When you switch the set off with the power switch, TIMER-recordings are not 2 Aerial input socket: To connect the aerial cable
possible!
m Standby : To switch off, interrupt a function, interrupt a programmed recording (TIMER)
Pp Programme number : To select programme number up or down
Sp Volume: To regulate the volume
H Rewind : During STOP and STANDBY: rewind, during PLAYBACK: reverse scanning
I Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward
scanning
5 Record: To record the programme selected
G Playback : To play a recorded cassette
J/h Pause/Stop, eject cassette: To stop the tape and during STOP eject the cassette
AUDIO Audio input socket
VIDEO Video input socket : To connect a camcorder or videogames
w Headphones socket: To connect headphones
OPERATING INSTRUCTIONS PHILIPS 14PV320/05
Congratulations! You now own one of the most sophisticated So that you can identify your machine in the event of theft,
and simple-to-use TV-VIDEO Combinations on the market. enter the serial number (PROD.NO) here. The serial number is
With this TV-VIDEO Combi you can record and play printed on the type plate fixed at the rear of the set.
VHS-standard cassettes.
MODEL NO. 14PV320/05
Please take the time to read this operating manual before PROD.NO: . . . . . .
using your TV-VIDEO Combi.
This product complies with the requirements of the Directive
73/23/EEC + 89/336/EEC + 93/68/EEC.
Safety instructions and other notes
A Danger: High voltage!
Do not remove the top cover as there is a risk of an electrical Technical information
shock!
A The TV-VIDEO Combi does not contain any components that can Measurements in cm (W / H / D): 39.2 / 40.7 / 39.8
be repaired by the customer. To switch off the TV-VIDEO Combi Power consumption (Standby) : less than 45W (less than 4W)
completely you must push the mains switch. Voltage : 198-264V 50Hz
Headphones : Output resistance less than 120 Ohms maximum
B Make sure that air can circulate freely through the ventilation
slots on the TV-VIDEO Combi.
output voltage more than 2.6V at 120 Ohms
B Make sure that no objects or liquids enter the TV-VIDEO Combi.
If liquid is spilt into it, disconnect the TV-VIDEO Combi
immediately from the power supply and call the After-sales Emergency interrupt
Service for advice.
B The TV-VIDEO Combi should not be used immediately after You can use the STANDBY m button on the TV-VIDEO Combi or
transportation from a cold to a hot area or vice versa, or in the remote control to interrupt any function.
conditions of extreme humidity. If you want to interrupt a running Timer recording, hold the
After unpacking the TV-VIDEO Combi, it should be allowed to STANDBY m button for several seconds.
acclimatize for at least three hours before installation. So if you are having operating problems, you can just interrupt
C These operating instructions have been printed on nonpolluting the function and start again.
paper. And you can practise operating your set without any worries.
C Deposit old batteries at the relevant collection points. No matter which buttons you press, you cannot damage it.
C Please make use of the facilities available in your country for
disposing of the packaging of the TV-VIDEO Combi in a way that
helps to protect the environment.
C This electronic equipment contains many materials that can be
recycled. Please inquire about the possibilities for recycling
your old set.
D VIDEOPlus+ and PlusCode are registered trademarks of
Gemstar Development Corporation. The VIDEOPlus+ system is
manufactured under licence from Gemstar Development
Corporation.
1
Special functions on your TV-VIDEO Combi
If a television programme, which transmits TELETEXT, is stored with programme
number 'P01', time and date will be set automatically.
Philips has developed a system which produces the best possible playback
quality. It reduces disturbance on old, worn video cassettes, and emphasises
the detail on very good quality cassettes.
This function allows you to save the playback settings that suit you best. Select
your own personal settings for the type of film you are currently watching.
When you have plugged your TV-VIDEO Combi into the mains, you will be
welcomed with an OSD picture. All you have to do is follow the instructions in
the "intelligent help line" for the next step. Enjoy the Automatic TV channel
search/save function and the automatic time adjustment.
Automatic Volume Leveller. It minimises sudden changes in TV volume when
commercial spots are transmitted.
We guarantee that your TV-VIDEO Combi will switch to the new millennium with
no problems whatsoever.
Simple programming system for TV-VIDEO Combis. Makes programming as easy
as making a telephone call. Simply enter the programme code which you will
find in your listings magazine.
The precision tape drive from Philips with rewind times of 100 seconds (E180)
and automatic tape length recognition.
2
1. CONNECTING YOUR TV-VIDEO COMBI
Important for the United Kingdom Connecting the cables
This machine is fitted with an approved moulded 13 Amp plug.
To change a fuse in this type of plug, please follow these
instructions.
a Take off the fuse cover and take out the fuse.
b Put in a new fuse which should be a BS1362 3A, A.S.T.A.
or BSI approved type.
c Refit the fuse cover.
If the plug fitted is not suitable for your socket, cut it off and fit
another type.
If the plug you fit contains a fuse, it should be a 3Amp fuse. If
a Insert the aerial plug into the 2 socket.
you fit a plug which does not need a fuse, make sure the fuse
on your fuse box is not greater than 5 Amps.
b Insert the plug of the mains cable into the wall socket.
D Note: Please destroy the plug you have cut off so that it
cannot be used in a 13 Amp socket somewhere else.
c If the little red light at the front of the set is not alight,
please switch on the set. The power switch 8 is
How to connect a plug located on the left side panel of the set.
The wires in the lead from the video recorder are coloured as
follows.
* Blue - 'neutral' ('N').
* Brown - 'live' ('L').
Connecting a decoder or other equipment
d Connect the blue wire to the terminal in the plug which is You can also connect additional equipment to the EXT.1
marked with the letter 'N' or coloured black. socket. For instance, a satellite receiver, decoder or
camcorder.
e Connect the brown wire to the terminal in the plug which
is marked with the letter 'L' or coloured red.
f Do not connect either of the wires to the terminal in the
plug which is marked with the letter 'E', the symbol \or
coloured green or green and yellow.
Before you refit the plug cover, make sure that the grip at the
bottom of the plug is clamped over the plastic cover of the
lead, not just over the two wires.
4
2. INSTALLING YOUR TV-VIDEO COMBI
Initial installation Allocating a decoder
a Open up the battery compartment of your remote control Some TV stations will send coded TV channels, that you can
and place the batteries in it as shown in the picture. only watch when you use a decoder. You can connect such a
decoder (descrambler) to your TV-VIDEO Combi. With the
following function, the connected decoder will automatically
be activated for the TV programme you want to watch.
a Choose the TV channel on which you wish to use the
decoder with the qSC or DSr buttons on the
TV-VIDEO Combi or the number buttons 0-9 on the
remote control.
b Close the battery compartment.
b Press the MENU button on the remote control. The main
menu will appear.
c If you have connected the aerial to the TV-VIDEO Combi,
press the OK button.
c Select the line 'Installation' with the AP q or
'Automatic TV channel search' starts. This picture will
P rB buton and confirm with the SqC button.
appear on the screen:
d Select the line 'Manual store' with the AP q or
P rB button and confirm with the SqC button.
e Select the line 'Decoder' with the AP q or
Searching...
CHANNELS FOUND: P rB button.
//////,,,,,,,,,,,,,,,,,,,,,
MANUAL STORE
Channel/Frequency FREQU.
Search 125
Fine tuning (,,,,,,n=,,,,,,$
Name edit xxx
Programme number 01
Wait until all TV channels have been found. This can take Decoder OFF
several minutes.
The initial installation is now complete.