Text preview for : SAMSUNG_LW-15_17E33_34C_AS15E_17E.RAR part of Samsung LW-15 17E33 34C AS15E 17E Samsung LCD TV LW15,17E33 SAMSUNG_LW-15_17E33_34C_AS15E_17E.RAR
Back to : SAMSUNG_LW-15_17E33_34C_A | Home
4 Alignments and Adjustments
4-1 General Alignment Instruction
1. Usually, a color TV-VCR needs only slight touch-up adjustment upon installation.
Check the basic characteristics such as height, horizontal and vertical sync.
2. Use the specified test equipment or its equivalent.
3. Correct impedance matching is essential.
4. Avoid overload. Excessive signal from a sweep generator might overload the front-end
of the TV. When inserting signal markers, do not allow the marker generator to distort
test results.
5. Connect the TV only to a DC power source with voltage and frequency as specified on
the backcover nameplate.
6. Do not attempt to connect or disconnect any wire while the TV is turned on. Make sure
that the power cord is disconnected before replacing any parts.
7. To protect aganist shock hazard, use an isolation transformer.
LW15E33C/LW17E34C 4-1
4 Alignments and Adjustments
4-2 Adjustment Instruction
4-2-1 Service Mode Screen
* Service Mode entry
-. Remocon : Power off Display Menu Mute Power on
-. Factrory Remocon : Picture on Display Factory
1. Color Adjust R Gain 58
G Gain 48
B Gain 17
R Offset 49
G Offset 48
B Offset 43
Sub Contrast 13
Sub Bright 60
Sub Color 12
2. Options Default : on
Help Osd : off
Suwon Ch Table
Spain Ch Table
Eeprom clear
3. Auto Color
Auto color (PC)
Auto color (TV)
4. Checksum
5. Reset
4-2-2 Service function
1. EEPROM Clear : Initially executed when replacing OTP.
2. TV Auto Color : Used to adjust TV image color.
3. Reset : Used after all adjustments.
4. Other functions shown are not service related.
4-2-3 Adjustment Sequence for ROM change only
EEPROM Clear TV auto color PC auto color RESET
(For ROM
change only)
4-2 LW15E33C/LW17E34C