Text preview for : Panel_LG_Display_LC320WXE-SBC1_0_[DS].pdf part of . Various Panel LG Display LC320WXE-SBC1 0 [DS] . Various LCD Panels Panel_LG_Display_LC320WXE-SBC1_0_[DS].pdf



Back to : Panel_LG_Display_LC320WXE | Home

Global LCD Panel Exchange Center www.panelook.com




LC320WXE
Product Specification




SPECIFICATION
FOR
APPROVAL


( ) Preliminary Specification
( ) Final Specification


Title 32.0" WXGA TFT LCD

BUYER SUPPLIER LG.Display Co., Ltd.
MODEL *MODEL LC320WXE
SUFFIX SBC1 (RoHS Verified)
*When you obtain standard approval,
please use the above model name without suffix


SIGNATURE SIGNATURE
APPROVED BY APPROVED BY
DATE DATE

/ J. T Kim / Team Leader



REVIEWED BY

/ Y. H Choi / Project Leader




PREPARED BY
/ Y. D Lee / Engineer


Please return 1 copy for your confirmation with TV Products Development Dept.
your signature and comments. LG. Display LCD Co., Ltd


Ver. 1.0 1 / 43




One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com




LC320WXE
Product Specification


CONTENTS

Number Item Page
COVER 1
CONTENTS 2

RECORD OF REVISIONS 3
1 GENERAL DESCRIPTION 4
2 ABSOLUTE MAXIMUM RATINGS 5
3 ELECTRICAL SPECIFICATIONS 6
3-1 ELECTRICAL CHARACTERISTICS 6
3-2 INTERFACE CONNECTIONS 8

3-3 SIGNAL TIMING SPECIFICATIONS 10
3-4 SIGNAL TIMING WAVEFORMS 11
3-5 COLOR INPUT DATA REFERENCE 12
3-6 POWER SEQUENCE 13
4 OPTICAL SPECIFICATIONS 15
5 MECHANICAL CHARACTERISTICS 19
6 RELIABILITY 22

7 INTERNATIONAL STANDARDS 23
7-1 SAFETY 23
7-2 EMC 23
8 PACKING 24
8-1 INFORMATION OF LCM LABEL 24
8-2 PACKING FORM 24
9 PRECAUTIONS 25
9-1 MOUNTING PRECAUTIONS 25

9-2 OPERATING PRECAUTIONS 25
9-3 ELECTROSTATIC DISCHARGE CONTROL 26
9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE 26
9-5 STORAGE 26

9-6 HANDLING PRECAUTIONS FOR PROTECTION FILM 26


Ver. 1.0 2 / 43




One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com




LC320WXE
Product Specification


RECORD OF REVISIONS

Revision No. Revision Date Page Description
1.0 Mar, 06, 2009 - P8 32HD Final CAS V1.0 Release
Final Specification




Ver. 1.0 3 / 43




One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com




LC320WXE
Product Specification


1. General Description
The LC320WXE is a Color Active Matrix Liquid Crystal Display with an integral External Electrode Fluorescent
Lamp(EEFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element.
It is a transmissive type display operating in the normally black mode. It has a 31.51 inch diagonally measured
active display area with WXGA resolution (768 ver tical by 1366 horizontal pixel array).
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes.
Gray scale or the luminance of the sub-pixel color is determined with a 8-bit gray scale signal for each dot,
thus presenting a palette of more than 16.7M(true) colors.
It has been designed to apply the 8-bit 1-port LVDS interface.
It is intended to support LCD TV, PCTV where high brightness, super wide viewing angle, high color gamut,
high color depth and fast response time are important.

EEPROM

+12.0V SCL SDA
LVDS 1Port
LVDS Select #9 Timing Controller TFT - LCD Panel
CN1 (1366 768 x RGB pixels)
(30pin) [LVDS Rx + ODC + OPC
+ SDRAM + Spread Spectrum [Gate In Panel]
integrated]



S1 S1366
Power Circuit RGB
Block Source Driver Circuit

High Input
CN2, 3Pin, 12 Lamps/@93 mA
High Input Back light Assembly (12EEFL)
CN3, 3Pin, 12 Lamps/@93 mA

General Features
Active Screen Size 31.51 inches(800.4mm) diagonal
Outline Dimension 760.0 mm(H) x 450.0 mm(V) x 43.0 mm(D) (Typ.)
Pixel Pitch 510.75 x 170.25 x RGB
Pixel Format 1366 horiz. by 768 vert. pixels RGB stripe arrangement
Color Depth 8bit, 16,7 M colors
Luminance, White 500 cd/m2 (Center 1 point) (Typ.)
Viewing Angle (CR>10) Viewing angle free ( R/L 178(Min.), U/D 178(Min.))
Power Consumption Total 87.5Watt (Typ.) (Logic=3.5 W, Inverter= 84W [VBR-A=1.65V] )
Weight 5,5Kg(Typ.)
Display Operating Mode Transmissive mode, normally black
Surface Treatment Hard coating(3H), anti-glare treatment of the front polarizer (Haze 10%)


Ver. 1.0 4 / 43




One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com




LC320WXE
Product Specification


2. Absolute Maximum Ratings
The following items are maximum values which, if exceeded, may cause faulty operation or damage to the
LCD module.


Table 1. ABSOLUTE MAXIMUM RATINGS
Value
Parameter Symbol Unit Remark
Min Max

Power Input
LCD circuit VLCD +8.0 +14.0 V [DC] r
Voltage

Operating Voltage r
B/L Input voltage VOP 600 1300 V [RMS]
(one side) Burst Dimming Duty 100%

Option Input Voltage ( LVDS Select ) VI -0.3V +3.6V Page 9 #9 pin
Operating Temperature TOP 0 +50 C
Storage Temperature TST -20 +60 C
Note 1
Operating Ambient Humidity HOP 10 90 %RH
Storage Humidity HST 10 90 %RH

Note 1. Temperature and relative humidity range are shown in the figure below.
Wet bulb temperature should be 39 C Max, and no condensation of water.
2. Gravity mura can be guaranteed under 40 C condition.




90%

60
60%

50 Storage
Humidity [(%)RH]




Wet Bulb
Temperature [ C]
40
40%
Operation
30

20
10
0
10%


-20 0 10 20 30 40 50 60 70 80

Dry Bulb Temperature [ C]




Ver. 1.0 5 / 43




One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com




LC320WXE
Product Specification


3. Electrical Specifications
3-1. Electrical Characteristics
It requires two power inputs. One is employed to power for the LCD circuit. The other input power for the
EEFL/Backlight is to power inverter.


Table 2. ELECTRICAL CHARACTERISTICS
Value
Parameter Symbol Unit Note
Min Typ Max

Circuit :

Power Input Voltage VLCD 10.8 12.0 13.2 V [DC]

- 290 380 mA 1
Power Input Current ILCD
- 400 520 mA 2

Power Consumption PLCD - 3.5 5.16 Watt 1

Rush current IRUSH - - 3.0 A 3


Note : 1. The specified current and power consumption are under the VLCD=12.0V, 25 r 2 C, fV=60Hz
condition whereas mosaic pattern(8 x 6) is displayed and fV is the frame frequency.
2. The current is specified at the maximum current pattern.
3. The duration of rush current is about 2ms and rising time of power input is 0.5ms (min.).



White : 255Gray
Black : 0Gray




Mosaic Pattern(8 x 6)



Ver. 1.0 6 / 43




One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com




LC320WXE
Product Specification
Table 3. ELECTRICAL CHARACTERISTICS (Continue)

Values
Parameter Symbol Unit Notes
Min Typ Max
Backlight Assembly :
Operating Voltage
VBL 860 1020 1187 VRMS 1, 2
(one side,fBL=63KHz,IBL= 93 mArms)

Operating Current (one side) IBL 87 93 99 mARMS 1

Established Starting 0 - - 1095
VS VRMS 1, 3
Voltage (one side) 25 - - 920
Operating Frequency fBL 61 63 65 kHz 4
Striking Time S TIME - - 2 sec 3
Power Consumption PBL 84 Watt 6
Burst Dimming Duty { a/T } * 100 20 100 % 9
Burst Dimming Frequency 1/T 95 - 182 Hz 9

Values
Parameter Symbol Unit Notes
Min Typ Max
Lamp : (APPENDIX-VI)
Lamp Voltage (one side) VLAMP 689 1035 1187 VRMS 2
Lamp Current (one side) ILAMP 3 7.75 8.5 mARMS
Discharge Stabilization Time TS - - 3 Min 5
Lamp Frequency f LAMP 40 63 80 KHz
Lamp Temperature TLAMP 130 C
Established Starting 0 VS 1095
VRMS 3
Voltage (one side) 25 VS 920
Life Time 50,000 Hrs 7
Note : The design of the inverter must have specifications for the lamp in LCD Assembly.
The electrical characteristics of inverter are based on High-High Driving type.
The performance of the lamps in LCM, for example life time or brightness, is extremely influenced by
the characteristics of the DC-AC inverter. So, all the parameters of an inverter should be carefully
designed so as not to produce too much leakage current from high-voltage output of the inverter.
When you design or order the inverter, please make sure unwanted lighting caused by the mismatch
of the lamp and the inverter (no lighting, flicker, etc) has never been occurred. When you confirm it,
the LCD