Text preview for : 6830-TE.pdf part of MAKITA 6830-TE MAKITA 6830-TE.pdf
Back to : 6830-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. 6830
New Tool
Description Auto Feed Screwdriver
CONCEPTION AND MAIN APPLICATIONS
Model 6830 is a screwdriver with a mechanism to feedscrews
automatically. So you do not need to do bothersomeone-by-one
setting driving. Shorter tool length, well-balanced design and in-line
D-handle assures easieroperation.
(Note) 342mm(13-7/16")
This tool is not offered to some countries and areas.
Consult Makita Japan on this matter.
191mm(7-1/2")
Specifications 76mm(3")
Continuous Rating (W)
Voltage (V) Current (A) Cycle (Hz) Max. Output(W)
Input Output
100 5.0 50/60 470 220 400
115 4.3 50/60 470 220 400
200 2.5 50/60 470 220 400
220 2.3 50/60 470 220 400
230 2.2 50/60 470 220 400
240 2.1 50/60 470 220 400
Capacities
Drywall Screw 4mm x 25mm (5/32"x 1")
4mm x 28mm (5/32"x 1-1/8")
4mm x 32mm (5/32"x 1-1/4")
4mm x 40mm (5/32"x 1-9/16")
No Load Speed 0 - 4,700 R/min.
Net Weight 1.9Kg (4.2 lbs.)
Standard equipment
Phillips Bit 2-117 (3 pcs.), Hex Wrench 3, Plastic Carrying Case
Optional accessories
Phillips Bit 2-117 (5 pcs. per pkg)
Features and benefits
1. Double insulated
2. Refer to the attached sheet for more information.
The standard equipment for the tools shown may differ form country to country
Special mechanism to allow easy
bit installation and to prevent
the bit from coming out unex-
New silent clutch mechanism
pectedly during operation.
for quiet action
Auto-feed attachment can be
removed easily by loosening
one screw. This allows easy
bit replacement.
Variable speed trigger switch:
Handy for driving and backing
Equipped with a dust cover to screws so simple.
protect the gear from dust
Smooth sliding of feeder box D-handle grip configured ide-
for less fatigue of operator ally for sure, straight-line
driving action.
312.0 30.0
33.5
170.0
Reversing switch makes it easy
36.0
to back out screws.
Convenient carry hook can be
Adjustable stopper plate can equipped on either side.
be set for 3 different screw
lengths.It also has a notch
for easy screw centering. Hex wrench can be stored here.
High-speed (0-4,700 rpm) for
high efficiency
Screw guide assures smooth,acc-
urate feed of screw.
Depth adjusting knob lets you
drive to exact depth.No need Compact housing,well-balanced
to readjust when you change design:Better balance from
screw size. positioning the motor at 45
for easier,better driving operation