CS580_10.PDF part of LG CS580 10 CS580_10.PDF, LG Monitor sw56i CS580

Text preview for : CS580_10.PDF part of LG CS580 10 LG Monitor sw56i CS580_10.PDF

Back to : CS580_10.PDF | Home

DISASSEMBLY

1. TILT/SWIVEL REMOVAL
Set the monitor face down.
Pressing the latch , carefully remove the Tilt/Swivel
by pulling it upward.

4. CRT BOARD ASSEMBLY REMOVAL
2. BACK COVER REMOVAL Remove three pins .
Remove four screws from the Back Cover. Carefully separate the CRT Board Assembly from
Slide the Back Cover away from the Front Cabinet the CRT neck.
of the monitor. Discharge the remaining static electricity by shorting
between the Anode Cap and the CRT ground.
Disconnect the Anode Cap from the CRT

Anode cap

3. TOTAL CHASSIS ASSEMBLY REMOVAL
Disconnect P902(Degaussing pin) and P701
(DY pin).
Remove five screws from the Bottom Bracket to
remove the Ground Wire of the CRT.
Remove two screws from the Main Bracket to
separate it from the Front Cabinet.

- 11 -
5. BOTTOM BRACKET REMOVAL 6. MAIN BOARD ASSEMBLY REMOVAL
Remove two screws . Remove three screws .
Remove the Bottom Bracket. Remove three screws .
Release four latches from the Main Board
Assembly.

Bottom bracket

- 12 -