Text preview for : 2H9-011.pdf part of Kyocera 2H9-011 Kyocera Printer FS-1028-1128MFP SERVICEBULLETINS 2H9-011.pdf
Back to : 2H9-011.pdf | Home
Service Bulletin
SB Number: SB 2H9-011 Creation Date: 16/11/2010
Subject: Replacing/Re-assembling the Holder DU and Stay DU
Model: FS-1028MFP/1128MFP
The Holder DU and Stay DU will no longer be supplied as individual parts since the paper may feed a skewed,
when the adjustment is not performed after replacing one of the above mentioned parts individually. Therefore
please use the Parts holder DU assy SP (302FM94060), when replacing the Holder DU or Stay DU.
Above view of the machine
Old condition New condition
Pulley MID Stay DU Parts holder du assy SP
Holder DU Shaft pulley
Parts
No. Old Parts New Parts Description Q'TY Interchange- SP
No. No. ability
Old New Old New
1 ------------ 302FM94060 PARTS HOLDER DU ASSY SP (*1) - 1 - O O
2FM94060
2 2FM21010 ------------ +HOLDER DU - - - - -
5MVX861XB001
3 2FM21020 ------------ +STAY DU - - - - -
5MML821SD009
Part notes: (*1): This Assembly part contains the Holder DU (1 piece), the Stay DU (1 piece), the Shaft pulley_
302FM02421 (1 piece) and the Pulley MID_2FM02210 (2 pieces)
Classification Entire stock rework In-field modification at next visit In-field modification by case X No modification necessary
Field measure When replacing the Holder DU and Stay DU, please use the Parts holder DU assy SP
(302FM94060). Do not replace the Holder DU and Stay DU individually. Under this condition,
a skewed feeding of the paper may occur.
Serial numbers of affected machines
Type Serial number
FS-1028MFP/1128MFP Not available
KMIS Service Department, Kyocera Mita Europe Page 1 of 1 A324 / SB 2H9-011