Text preview for : 3JY-002a.pdf part of Kyocera 3JY-002a Kyocera Printer _OPTIONS DF-710 SERVICEBULLETINS 3JY-002a.pdf
Back to : 3JY-002a.pdf | Home
Service Bulletin
SB Number: SB 3JY-002 Creation Date: 11/02/2008
Subject: Firmware change, new model support
Model: DF-710/730, DP-710
The firmware for DF-710 and DP-710 has been changed to support KM-C4035E.
The firmware for DF-730 has been changed to support KM-2560/3060/2540/3040 and KM-C4035E.
NOTE:
The below table describes the compatibility between current and new machines/accessories.
The newer DF-710/730 and DP-710 are compatible with the KM-C4035E.
Compatible with present model Support for new model
Main body to KM-C2520/C3225/C3232 KM-C4035E
which it can be installed KM-C2525E/C3232E DF 730 supports KM-2560/3060/2540/3040.
Label on the
outer carton
DF-710 DF-730 DP-710 DF-710 DF-730 DP-710
Item code: 1203JY3UT0 1205H13UT0 1203J93UT0 1203JY3U10 1205H13U10 1203J93U10
DF-710
No. Old Parts New Parts Description Q'ty Interchange Firmware version.
No. No. ablity
Old New Old New
1 303JY01022 303JY01023 MIDDLE PWB ASS'Y 1 1 X O 3JY_9600.004.002
3JY01022 3JY01023
2 303JY80014 303JY80015 MAIN PWB ASS'Y WITH 1 1 X O 3JY_9200.006.003
3JY80014 3JY80015 SOFTWARE SP
DP-710
No. Old Parts New Parts Description Q'ty Interchange Firmware version.
No. No. ablity
Old New Old New
1 303J901011 303J901012 DRIVER PWB ASS'Y 1 1 X O 3J9_9500.004.005
3J901011 3J901012
DF-730
No. Old Parts New Parts Description Q'ty Interchange Firmware version.
No. No. ablity
Old New Old New
1 305H180020 305H180021 PBA-CONT-F 1 1 X O 5H1_9200.002.007
5H180020 5H180021
KMIS Service Department, Kyocera Mita Europe Page of 2 8095 / SB 3JY-002
Service Bulletin
Affected machine serial numbers
Model Item code Start serial number
DF-710 1203JY0U10 PRA7508105 and higher
1203JY3U10 PNP7502090 and higher
DF-730 1205H10U10 URF7412474 and higher
PRK******1 and higher
1205H13U10 UNN******1 and higher
PNX******1 and higher
DP-710 1203J95J10 PVM7507511 and higher
1203J90K10 PAQ7517537 and higher
1203J93U10 PNN7503761 and higher
Contents of changes in firmware
Model Item Contents
1 DF-710 Support for KM-C4035E. Changed the conveying speed.
DF-730
DP-710
2 DF-710 The timing of paper holding solenoid In order to reduce the sound of the paper holding lever hitting
has been adjusted. the main tray, the operation timing of the paper holding solenoid
has been changed.
3 DF-710 Method to prevent JAM 88 There is a possibility that JAM88 might occur when copying 3
(Main tray eject JAM). sheets monochrome A4 copies with 2 staples continuously.
4 DP-710 The paper feeding timing when using When using the Auto select function, there is a possibility that
the Auto select function has been small sized originals are detected as large sized originals and
changed. the copy image is printed half on the large sized paper.
KMIS Service Department, Kyocera Mita Europe Page 2 of 2 8095 / SB 3JY-002