Text preview for : 4190D-TE.pdf part of MAKITA 4190D-TE MAKITA 4190D-TE.pdf
Back to : 4190D-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. 4190D
New Tool
Description MAKITA 80 mm Battery cutter
CONCEPT AND MAIN APPLICATIONS 313
This machine, wherein the bevel cutting
function capable of angle-cutting (45"cutting)
for the tile etc. is additionally built in the
model 4103D(80 mm cordless diamond cutter),
has been developed to enlarge the application range.
The 4190D is the model without the charger
123
and diamond wheel.
The 4190DW is made through the combination
147
of 4190D, Battery, charger and diamond wheel.
(The height of the water supply unit is not included)
Specifications
Motor DC 9.6 V magnet motor
No load speed (R.P.M.) 1000/min.
Overall length of machine 460 mm
Max. cutting depth 0-18 mm in the right angle, 0-16 mm in beveling at 45
Inner diameter (mm) 15
Net weight 1.9 kg(Battery included)
Power supply cord
Standard equipment
Diamond wheel 80(for wet-type) --- Only for 4190DW
Hexagon rod spanner 4 --- Attached on the body
Optional accessories
Diamond wheel 80
Battery 9600
Rubber plate(For holding the bottom of base, for preventing the material surface to be cut from damaging)
Features and benefits
(1) With the bevel cutting function(0-45), the tiles on the bath room or the entrance of a house can be jointed
together.
[Other are the same as 4103D.]
(2) The water supply unit mounted on the body as well as the cordless type requires no power cord or the water hose
and it can be used at any place.
(3) The safety lock switch built in the switch provides the safety operation wherein the diamond wheel cannot run
even if the trigger on the switch is pulled out once the safety lock has been locked.
(4) The cartridge type spare battery enables the continuous operation.
The standard equipment for the tools shown may differ form country to country
Repair
(1) Conform to the 4130D. Diamond whell
(2) Check if the clearance between the edge of water supply
tube and the diamond wheel is the one as shown on the
figure 1. If extremely out-of-positioned, adjust the water supply tube.
Water supply wheel
About 1 mm
[Figure 1]