Text preview for : 7-npd1assem.pdf part of NOKIA 7-npd1assem NOKIA Mobile Phone 3570-3585 7-npd1assem.pdf



Back to : 7-npd1assem.pdf | Home

CCS Technical Documentation
NPD-1 Series Transceivers




Assembly




Issue 1 11/2002 Confidential Nokia Corporation
NPD-1
Assembly CCS Technical Documentation




Page 2 Nokia Corporation Confidential Issue 1 11/2002
NPD-1
CCS Technical Documentation Assembly


Assembly Instructions
1. Antenna assembly.
Note: Use a new part if the antenna has been removed.




If antenna is being replaced, place a new antenna into the slot and press down (see
arrows in above photos) to snap the assembly into place.

2. Parts assembly.




If any of the parts within the D-cover assembly have been removed, insert new parts into
their proper locations. The following diagrams (a through i) illustrate in detail the inser-
tion procedures for each assembly part.




Issue 1 11/2002 Nokia Corporation Confidential Page 3
NPD-1
Assembly CCS Technical Documentation

a.) Ground clip assembly




b.) Vibra assembly




c.) DC jack assembly




Page 4 Nokia Corporation Confidential Issue 1 11/2002
NPD-1
CCS Technical Documentation Assembly

d.) Microphone assembly




e.) SIM card assembly




Issue 1 11/2002 Nokia Corporation Confidential Page 5
NPD-1
Assembly CCS Technical Documentation

f.) Midi speaker assembly




g.) Battery connector assembly




Page 6 Nokia Corporation Confidential Issue 1 11/2002
NPD-1
CCS Technical Documentation Assembly

h.) Power button assembly




i.) Keymat assembly




Issue 1 11/2002 Nokia Corporation Confidential Page 7
NPD-1
Assembly CCS Technical Documentation


3. PWB assembly.




Place the PWB assembly inside the D-cover, making sure it is correctly aligned.

4. LCD assembly.




Place the display assembly on top of the PWB inside the D-cover.

Note: Be careful not to bend the display assembly during placement.




Snap the display assembly into the D-cover in the order shown.

Note: Do not touch or apply pressure directly to the display glass.




Page 8 Nokia Corporation Confidential Issue 1 11/2002
NPD-1
CCS Technical Documentation Assembly


5. Screw assembly.




Mount the screws in the order shown above.

Note: Use 23+/-2Ncm (350 RPM max).

Note: Ensure that the display assembly is inserted properly prior to mounting the screws.

6. A-cover assembly.




Mount the A-cover by fitting the guide fins into the D-cover first.

7. B-cover assembly.




Mount the B-cover as shown.




Issue 1 11/2002 Nokia Corporation Confidential Page 9
NPD-1
Assembly CCS Technical Documentation




Page 10 Nokia Corporation Confidential Issue 1 11/2002