AS-138.pdf part of Kyocera AS-138 AS-138.pdf, Kyocera Printer _OPTIONS DF-600 SERVICEBULLETIN AS-138.pdf text manual preview

Text preview for : AS-138.pdf part of Kyocera AS-138 Kyocera Printer _OPTIONS DF-600 SERVICEBULLETIN AS-138.pdf

Back to : AS-138.pdf | Home

1/3
Service Bulletin
SB Number: SB AS-138 Creation Date: 25/02/2005
Subject: Change of sub ejection section
Model: DF-600, DF-610
DF-600: finisher for KM-4530, FS-C8026N, KM-C2630/C2630D
DF-610: finisher for KM-4530/5530/6330/7530, FS-C8026N,KM-C2630/C2630D

Please be informed that the following changes have been implemented to the DF-600/610 sub ejection section.

Field Action
When replacing any of the involved parts in this modification, please mind to use the old parts for former finisher
(before affected serial number on page 3) and the new parts for the modified finisher (after affected serial number
on page 3).

CONTENTS OF CHANGES

1) Improving the efficiency of assembly work

a. The fixation method of the `RIGHT GUIDE SUB CONVEYING' to the `MOUNT, CONVEYING GUIDE' has been
changed from 3 pieces of `BINDING SCREW BVM4X6 (BLACK)' to 1 piece.

b. The fixation method of `UPPER GUIDE, SUB CONVEYING' to the `MOUNT, CONVEYING GUIDE' has been
changed from 4 pieces of `BINDING SCREW BVM4X6 (BLACK)' to 2 pieces.

c. Hook parts have been added and holes have been created to the `RIGHT GUIDE SUB CONVEYING', `UPPER
GUIDE, SUB CONVEYING' and `MOUNT, CONVEYING GUIDE'.

2) Reduction of deterioration of the shaft for `PULLEY EXIT'

d. So far, for fixation, the `PULLEY EXIT' was fitted into the `PLATE SPRING, SUB EJECT'. The fixation method
has been changed so that the `PULLEY EXIT' is put through the `SHAFT SUB EJECT PULLEY'.

3) Protecting the wires

e. In order to protect the wires of `SOLENOID PADDLE' from the edge of `MOUNT, CONVEYING GUIDE' (used for
DF-610), the `EDGING, EDS-17L (KITAGAWA)' has been added as wire protection. In addition, the hole shape
for the wires on `MOUNT, CONVEYING GUIDE' has been changed in order to attach the `EDGING, EDS-17L
(KITAGAWA)'.

4) Common use of certain parts with next new models

f. A screw hole has been created into the `MOUNT, CONVEYING GUIDE'.

Please refer to Fig. 1 on next page
Change 1
a. See dotted arrows in Fig.1.
b. See red arrows in Fig 1.
c. The hook parts of `RIGHT GUIDE SUB CONVEYING': dotted blue circled section
The hook parts of `UPPER GUIDE, SUB CONVEYING': red circled section

Change 2-d