Text preview for : 2K3-002.pdf part of Kyocera 2K3-002 Kyocera Printer FS-6025-6030MFP SERVICEBULLETINS 2K3-002.pdf
Back to : 2K3-002.pdf | Home
Service Bulletin
SB Number: SB 2K3-002 Creation Date: 04/03/2011
Subject: The LVU main PWB has been changed
Model: FS-6025MFP/6025MFP(B)/6030MFP
Contents of changes
To improve the procurement, the Parts LVU main 200 SP (302K394121) has been changed as follows:
1. The discharger IC has been added.
1.1. The capacitor (YC10), that supplies the power to the AC-cut to the jumper, has been changed.
1.2. The constant of the discharger has been changed and the discharger resistor has been discontinued.
2. Due to the above mentioned changes the following changes have been made:
2.1. The AC-cut unit has been discontinued.
2.2. The access saddles (3 pieces) and the cables (2 pieces) have been discontinued.
Parts LVU main 200 SP (302K394121)
The AC-CUT unit has been
discontinued
The access saddles
have been discontinued The cable that connects the
AC-CUT unit with the Main
PWB has been discontinued
LVU main PWB
The cables that connect the AC-CUT unit with the Main PWB (YC106) have been discontinued
Rear side of the machine
Discontinued cable Main PWB
KMIS Service Department, Kyocera Mita Europe Page 1 of 4 B031 / SB 2K3-002
Service Bulletin
Parts
No. Old Parts New Parts Description Q'TY Interchange-
No. No. ability
Old New Old New
1 302K394120 302K394121 PARTS LVU MAIN 200 SP 1 1 X O
2K394120 2K394121
Classification Entire stock rework X In-field modification by case No modification necessary
In-field modification at next visit
Field measure When replacing the Parts LVU main 200 SP, please use the latest type. When the old type of the
LVU main PWB is installed in the machine, both the old and latest type of the LVU main 200 SP
can be used. Please note that the AC-cut unit, access saddles (3 pieces) and cables (2 pieces)
have to be removed when using the latest type of the Parts LVU main 200 SP (302K394121).
Serial numbers of affected machines
Type Serial number
FS-6025MFP/6025MFP/B/6030MFP February 2011 production.
The above mentioned changes have been applied to machines produced after the above mentioned production date.
Recognizing the latest type of the LVU Main PWB
LABEL
Old LVU main PWB: 302K3****0(<--Last digit is "0")
New LVU main PWB: 302K3****1(<--Last digit is "1")
KMIS Service Department, Kyocera Mita Europe Page 2 of 4 B031 / SB 2K3-002
Service Bulletin
No. Figure Procedure
1 Remove the controller box
cover at the lower right side of
the rear side of the machine.
Controller box cover
2 Remove the rear cover.
(When refitting it, please fit the
hooks to the sections that are
circled in red in the left figure.)
3 Remove the left lower cover.
KMIS Service Department, Kyocera Mita Europe Page 3 of 4 B031 / SB 2K3-002
Service Bulletin
4 Remove the front upper cover
at the machine front side.
(When refitting it, please fit the
lower hook of the cover to the
sections that are indicated by
the red arrows and then fit the
other hooks.)
5 Remove the inner tray.
(When refitting it, please fit the
X hook (X) at the machine inner
side and the hook (Y) at the
machine left side.)
Y
KMIS Service Department, Kyocera Mita Europe Page 4 of 4 B031 / SB 2K3-002