Text preview for : NSX-SZ-AJ 300 - 305 Rev_BIS.pdf part of Aiwa NSX-AJ300, NSX-AJ305, NSX-SZ300, NSX-SZ305 Service Manual Cd Stereo System - Tape mech. ZZM-3 PR1NM, Cd Mech. BZG-5 ZD3NM - (5.955Kb) 3 Part File - pag. 39
Back to : cd_stereo_system.part1.ra | Home
NSX-AJ300 NSX-AJ305 NSX-SZ300 NSX-SZ305
U U LH,EZ EZ
SERVICE MANUAL
COMPACT DISC STEREO SYSTEM BASIC TAPE MECHANISM : ZZM-3 PR1NM BASIC CD MECHANISM : BZG-5 ZD3NM
SYSTEM NSX-AJ300 NSX-AJ305 NSX-SZ300 NSX-SZ305 CD CASSEIVER CX-NAJ300 CX-NAJ305 CX-NSZ300 SX-NSZ302 CX-NSZ305 SPEAKER SX-NAJ302 SX-NAJ302 SX-R145 RC-ZAS02 REMOTE CONTROLLER
· This Service Manual is the "Revision Publishing" and replaces "Simple Manual" of NSX-AJ300/SZ300/AJ305, (S/M Code No. 09-011-440-5T1) and NSX-SZ305, (S/M Code No. 09-012-440-5T2). · If requiring information about the CD mechanism, see Service Manual of BZG-5, (S/M Code No. 09-00C-353-3N2).
S/M Code No. 09-012-440-5R1
RE VI SIO DA N TA
SPECIFICATIONS
Main unit CX-NAJ300/CX-NSZ300/CX-NAJ305/CX-NSZ305
Tuning range Usable sensitivity (IHF) Antenna terminals Tuning range Usable sensitivity Antenna Tuning range Usable sensitivity Antenna Power output 87.5 MHz to 108 MHz U,LH: 13.2 dBf EZ: 16.8 dBf 75 ohms (unbalanced) Power requirements U: 120 V AC, 60 Hz LH: 120 V/220-230 V/240 V AC (switchable), 50/60 Hz EZ: 230 V AC, 50 Hz 300U: 70 W 305U: 85 W LH: 90 W EZ: 75 W With ECO mode on: 0.6 W With ECO mode off: U: 20 W LH: 19 W EZ: 17 W 260 x 324 x 351 mm (101/4 x 127/8 x 137/8 in.) 300U: 6.4 kg (14 lbs 2 oz.) 305U: 6.5 kg (14 lbs 5 oz.) LH: 6.9 kg EZ: 5.8 kg
Power consumption
530 kHz to 1710 kHz (10 kHz step) 531 kHz to 1602 kHz (9 kHz step) 350 µV/m Loop antenna
Power consumption in standby mode
144 kHz to 290 kHz 1400 µV/m Loop antenna
Dimensions of main unit (W x H x D) Weight of main unit
Total harmonic distortion
Inputs Outputs
Rated U: 60 W + 60 W (50 Hz 20 kHz, THD less than 1%, 6 ohms) LH: 62 W + 62 W (1 kHz, THD 1%, 6 ohms) EZ: 32 W + 32 W (6 ohms, THD 1%, 1 kHz/DIN 45500) Reference U: 75 W + 75 W (1 kHz, THD less than 10%, 6 ohms) LH: 80 W + 80 W (1 kHz, THD 10%, 6 ohms) EZ: 40 W + 40 W (6 ohms, THD 10%,1 kHz/DIN 45324) EZ: DIN MUSIC POWER: 120 W + 120 W U: 0.08 % (30 W, 1 kHz, 6 ohms, DIN AUDIO) LH: 0.08 % (40 W, 1 kHz, 6 ohms, DIN AUDIO) EZ: 0.08 % (20 W, 1 kHz, 6 ohms, DIN AUDIO) VIDEO/AUX: 500 mV SPEAKERS: 6 ohms or more SURROUND SPEAKERS <305U> 8 ohms to 16 ohms PHONES: 32 ohms or more
Front Speakers SX-NAJ302/SX-NSZ302
Speaker system 3 way, bass reflex (magnetic shielded type) Speaker units Woofer: 160 mm (63/8 in.) cone Tweeter: 60 mm (23/8 in.) cone Super tweeter: 20 mm (13/16 in.) ceramic Impedance 6 ohms Output sound pressure level 87 dB/W/m Dimensions (W x H x D) 230 x 324 x 235 mm (91/8 x 127/8 x 93/8 in.) Weight U: 3.5 kg (7 lbs 11 oz.) LH: 4.5 kg EZ: 4.3 kg
Surround Speakers SX-R145 (NSX-AJ305 only)
Speaker system Speaker units Impedance Dimensions (W x H x D) Weight 1 way, bass reflex Full range: 80 mm (31/4 in.) cone 8 ohms 100 x 132 x 116 mm (4 x 51/4 x 45/8 in.) 0.5 kg (1 lbs 2 oz.)
Track format Frequency response Recording system Heads
4 tracks, 2 channels stereo 50 Hz 15 kHz AC bias Deck 1: Playback x 1 Deck 2: Recording/Playback x 1, erase x 1
· Design and specifications are subject to change without notice. · The word "BBE"and the "BBE symbol" are trademarks of BBE Sound, Inc. Under license from BBE Sound,Inc.
Laser Semiconductor laser ( =780 nm) D-A converter 1 bit dual Signal-to-noise ratio 85 dB (1 kHz, 0 dB) Harmonic distortion 0.05 % (1 kHz, 0 dB)
2
PROTECTION OF EYES FROM LASER BEAM DURING SERVICING
This set employs laser. Therefore, be sure to follow carefully the instructions below when servicing.
CAUTION
Use of controls or adjustments or performance of procedures other than those specified herin may result in hazardous radiation exposure.
WARNING!!
WHEN SERVICING, DO NOT APPROACH THE LASER EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO CONFIRM LASER BEAM EMISSION. BE SURE TO OBSERVE FROM A DISTANCE OF MORE THAN 30cm FROM THE SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
s Caution: Invisible laser radiation when open and interlocks defeated avoid exposure to beam. Advarsel: Usynlig laserståling ved åbning, når sikkerhedsafbrydere er ude af funktion. Undgå udsættelse for stråling.
ATTENTION
L'utillisation de commandes, réglages ou procédures autres que ceux spécifiés peut entraîner une dangereuse exposition aux radiations.
ADVARSEL
Usynlig laserståling ved åbning, når sikkerhedsafbrydereer ude af funktion. Undgå udsættelse for stråling. This Compact Disc player is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT label is located on the rear exterior.
s
VAROITUS!
Laiteen Käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saataa altistaa käyt-täjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. VARNING! Om apparaten används på annat sätt än vad som specificeras i denna bruksanvising, kan användaren utsättas för osynling laserstrålning, som överskrider gränsen för laserklass 1.
CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1
LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT
Precaution to replace Optical block (KSS-213F)
Body or clothes electrostatic potential could ruin laser diode in the optical block. Be sure ground body and workbench, and use care the clothes do not touch the diode. 1) After the connection, remove solder shown in the right figure.
(KSS 213F) PICKUP Assy PWB
Solder
3
NOTE ON BEFORE STARTING REPAIR
1. Forced discharge of electrolytic capacitor of power supply block
When repair is going to be attempted in the set that uses relay circuit in the power supply block, electric potential is kept charged across the electrolytic capacitors (C101, 102) even though AC power cord is removed. If repair is attempted in this condition, secondary defect can occur. In order to prevent the secondary trouble, perform the following measures before starting repair work.
Discharge procedure
1 Remove the AC power cord. 2 Connect a discharging resistor at an end of lead wire that has clips at both ends. Connect the other end of the lead wire to metal chassis. 3 Contact the other end of the discharging resistor to the positive (+) side (+VH) of C101. (For two seconds) 4 Contact the same end of the discharging resistor as step 3 to the negative (-) side (-VH) of C102 in the same way. (For two seconds) 5 Check that voltage across C101 and C102 has decreased to 1 V or less using a multimeter or an oscilloscope.
MAIN C.B D101
3
C101
C102
4
2
2
Select a discharging resistor referring to the following table. Charging voltage (V) (C101, 102) 25-48 49-140 Discharging resistor () 100 220 Rated power (W) 3 5 Parts number 87-A00-247-090 87-A00-232-090
Fig-1
Note: The reference numbers (C101, C102) of the electrolytic capacitors can change depending on the models. Be sure to check the reference numbers of the charging capacitors on schematic diagram before starting the discharging work.
2. Check items before exchanging the MICROCOMPUTER
Be sure to check the following items before exchanging the MICROCOMPUTER. Exchange the MICROCOMPUTER after confirming that the MICROCOMPUTER is surely defective.
2-1. Regarding the HOLD terminal of the MICROCOMPUTER
When the HOLD terminal (INPUT) of the MICROCOMPUTER is "H", the MICROCOMPUTER is judged to be operating correctly. When this terminal is "L", the main power cannot be turned on. Therefore, be sure to check the terminal voltage of the HOLD terminal before exchange. When the MICROCOMPUTER is not defective, the HOLD terminal can also go "L" when the POWER AMPLIFIER has any abnormalities that triggers the abnormality detection circuit on the MAIN C. B. that sets the HOLD terminal to "L".
· Good or no good judgement of the MICROCOMPUTER
1 Turn on the AC main power. 2 Confirm that the main power is turned on and the HOLD terminal of the MICROCOMPUTER keeps the "H" level or not. 3 When the HOLD terminal is "L" level, the abnormality detection circuit is judged to be working correctly and the MICROCOMPUTER is judged to be good.
4
In such a case, check also if the POWER AMPLIFIER circuit or power supply circuit has any abnormalities or not.
2-2. Regarding reset
There are cases that the machine does not work correctly because the MICROCOMPUTER is not reset even though the AC power cord is re-inserted, or the software reset (pressing the STOP key + POWER key) is performed. When the above described phenomenon occurs, it can lead to wrong judgement as if the MICROCOMPUTER is defective and to exchange the MICROCOMPUTER. In such a case, perform the forced-reset by the following procedure and check good or no good of the MICROCOMPUTER. 1 Remove the AC power cord.
TE R
RO
CO
M
PU
FRONT C.B % VSS MICROC113 COMPUTER * VDD
M
18 15
IC
C113 FRONT C.B
Short with tweezers.
Fig-2-2
2 Short both ends of the electrolytic capacitor C113 that is connected to VDD of the MICROCOMPUTER with tweezers. 3 Connect the AC power cord again. If the MICROCOMPUTER returns to the normal operation, the MICROCOMPUTER is good. Note: The reference number or MICROCOMPUTER pin number of transistor (Q110) and electrolytic capacitor (C113) can change depending on the models. Be sure to check the reference numbers on schematic diagram before starting the discharging work.
2-3. Confirmation of soldering state of MICROCOMPUTER
Check the soldering state of the MICROCOMPUTER in addition to the above described procedures. Be sure to exchange the MICROCOMPUTER after surely confirming that the trouble is not caused by poor soldering but the MICROCOMPUTER itself.
5
ELECTRICAL MAIN PARTS LIST
REF. NO. IC
PART NO.
KANRI NO.
DESCRIPTION
REF. NO. C19 C19 C20 C20 C21 C22 C25 C26 C27 C28 C30 C31 C32 C33 C34 C35 C36 C38 C60 C61 C83 C83 C97 C101 C101 C102 C102 C103 C104 C105 C106 C107 C108 C109 C110 C111 C112 C113 C113 C114 C114 C117 C118 C119 C120 C123 C124 C133 C140 C186 C187 C187 C188 C188 C223 C224 C225 C226 C227 C228 C229 C230 C231 C232 C235 C236 C241 C301 C302 C303
PART NO.
87-A21-419-040 87-A21-893-040 87-A21-695-010 87-070-127-110 87-A20-440-040 87-A21-218-110 87-A21-401-040 8B-NF9-602-030 8B-NF9-601-030 87-A21-269-010 TRANSISTOR 87-A30-559-010 87-A30-492-080 87-A30-076-080 87-A30-075-080 87-A30-107-070 87-A30-484-080 87-026-610-080 87-A30-190-080 87-A30-106-040 87-A30-162-010 87-A30-091-080 87-A30-090-080 87-A30-062-080 87-A30-495-080 87-A30-234-080 89-327-143-080 87-A30-489-080 89-503-602-080 87-A30-086-040 87-A30-494-080 87-A30-528-010 87-A30-529-010 87-A30-087-080 87-A30-074-080 87-A30-582-080 87-A30-468-080 87-026-213-080 87-A30-288-040 DIODE 87-A40-393-090 87-A40-553-080 87-A40-776-080 87-A40-764-080 87-A40-270-080 87-A40-269-080 87-A40-291-080 87-A40-749-080 87-017-149-080 87-A40-454-090 87-A40-747-080 87-A40-739-080 87-A40-748-080 87-A40-455-090 MAIN C.B C3 C4 C5 C6 C9 C10 C11 C12 87-012-368-080 87-012-368-080 87-012-368-080 87-012-368-080 87-010-759-080 87-010-759-080 87-010-759-080 87-010-759-080
C-IC,NJM14558MD-TE2 C-IC,NJM14558V-TE2 IC,LA1845L IC,LC72131D C-IC,BU1920FS<305EZ> IC,NJL64H380A C-IC,M61503FP C-IC,UPD780228GF-078-3BA<305EZ> C-IC,UPD780226GF-021-3BA IC,EW732
KANRI NO. 87-A12-036-000 87-A12-776-090 87-A12-036-000 87-A12-776-090 87-A12-777-090 87-A12-777-090 87-A12-072-080 87-A12-072-080 87-A12-072-080 87-A12-072-080 87-A12-095-080 87-A12-062-080 87-012-286-080 87-A12-062-080 87-A12-072-080
DESCRIPTION CAP, CAP, CAP, CAP, CAP, CAP, CAP, CAP, CAP, CAP, E E E E E E E E E E 2200-63 2200-50 2200-63 2200-50 3300-25 M M M M M SMG 85 SKR SMG 85 SKR 85 SKR
3300-25 M 85 SKR 100-25 SMG 100-25 SMG 100-25 SMG 100-25 SMG
CAP, E 100-50 SMG CAP,E 100-10 SMG C-CAP, U 0.01-25 CAP,E 100-10 SMG CAP, E 100-25 SMG CAP, E 47-25 SMG CAP, E 330-16 SMG C-CAP, U 0.01-25 CAP,E 3.3-50 SMG CAP,E 47-25 SMG CAP, E 470-25 SMG CAP, E 470-16 SMG C-CAP,U 0.1-16 Z F C-CAP,U 2700P-50 B C-CAP,U 2200P-50 K B C-CAP,U 2700P-50 B C-CAP,U 2200P-50 K B CAP,E 0.022-50 SMG CAP,E 0.022-50 SMG C-CAP,U 1800P-50 K B GRM C-CAP,U 1800P-50 K B GRM CAP,E 3.3-50 SMG CAP,E 3.3-50 SMG C-CAP,U 100P-50 CH C-CAP,U 100P-50 CH CAP,E 33-35 SMG CAP,E 33-35 SMG C-CAP,U 100P-50 CH C-CAP,S 100P-100 J CH C-CAP,U 100P-50 CH C-CAP,S C-CAP,S C-CAP,S C-CAP,U C-CAP,U 100P-100 J CH 0.1-50 Z F 0.1-50 Z F 0.01-25 0.01-25
TR,CSB1370EF TR,2SC5343G C-TR,2SC3052F C-TR,2SA1235F C-TR,CMBT5401 C-TR,KRA102S TR,KTC3198GR TR,CC5551 C-TR,CMBT5551 FET,2SK2937 FET,2SJ460 FET,2SK2541 C-TR,KRC104S TR,2SA1981Y TR,CSC4115BC C-TR,2SC2714(O) C-TR,KRA107S C-FET,2SK360E C-TR,CSD1306E TR,2SA1980G TR,2SB1686 TR,2SD2642 C-FET,2SK2158 C-TR,RT1P141C TR,CDA1585BC C-TR,KRC102S-RTK C-TR,DTC114YK C-TR,DTC114YKA<305EZ>
87-A12-071-080 87-A12-067-080 87-012-286-080 87-A12-089-080 87-A12-071-080 87-A12-074-080 87-A12-068-080 87-010-831-080 87-012-279-080 87-012-278-080 87-012-279-080 87-012-278-080 87-A12-084-080 87-A12-084-080 87-012-277-080 87-012-277-080 87-A12-089-080 87-A12-089-080 87-012-195-080 87-012-195-080 87-A12-077-080 87-A12-077-080 87-012-195-080 87-A10-596-080 87-012-195-080 87-A10-596-080 87-A12-368-080 87-A12-368-080 87-012-286-080 87-012-286-080 87-010-177-080 87-010-177-080 87-012-282-080 87-012-278-080 87-010-759-080 87-010-866-080 87-A12-091-080 87-010-866-080 87-A12-091-080 87-012-272-080 87-012-272-080 87-012-368-080 87-012-368-080 87-012-368-080 87-012-368-080 87-012-191-080 87-012-191-080 87-012-286-080 87-012-286-080 87-A12-094-080 87-A12-094-080 87-010-831-080 87-012-275-080 87-012-275-080 87-012-275-080
DIODE,1N5402GW(F20) DIODE,1N4003 LES ZENER,UZ27BSD ZENER,UZ10BSC C-DIODE,MC2838 C-DIODE,MC2836 DIODE,1N4148M(CPT) ZENER,UZ5.6BSB ZENER,HZS6A2L DIODE,1N5393 GW 12.5 ZENER,UZ5.1BSB ZENER,UZ2.7BSA ZENER,UZ5.6BSA DIODE,RL203GW
C-CAP,S 820P-25 J SL C2012 C-CAP,S 820P-25 J SL C2012 C-CAP,U 4700P-50 C-CAP,U 2200P-50 C-CAP,U, 0.1-25F CAP,E 10-63 M VX CAP,E 10-50 SMG CAP,E 10-63 M VX CAP,E 10-50 SMG C-CAP,U 680P-50 B C-CAP,U C-CAP,S C-CAP,S C-CAP,S C-CAP,S 680P-50 B 0.1-50 Z F 0.1-50 Z F 0.1-50 Z F 0.1-50 Z F
C-CAP,S C-CAP,S C-CAP,S C-CAP,S C-CAP,U
0.1-50 0.1-50 0.1-50 0.1-50 0.1-25
Z Z Z Z Z
F F F F F
C-CAP,U 0.015-50 Z F GRM C-CAP,U 0.015-50 Z F GRM CAP, U 0.01-25 CAP, U 0.01-25 CAP,E 47-50 SMG<305U> CAP,E 47-50 SMG<305U> C-CAP,U 0.1-16 Z F C-CAP,U 1200P-50 K B GRM C-CAP,U 1200P-50 K B GRM C-CAP,U 1200P-50 K B GRM
C-CAP,U 0.1-25 Z F C-CAP,U 0.1-25 Z F C-CAP,U 0.1-25 Z F
6
REF. NO. C304 C307 C308 C309 C310 C313 C314 C315 C317 C318 C326 C327 C350 C360 C399 C401 C402 C403 C404 C405 C406 C407 C408 C409 C410 C411 C412 C452 C453 C454 C455 C456 C457 C458 C459 C460 C461 C462 C470 C605 C606 C609 C610 C611 C612 C613 C614 C615 C616 C617 C618 C620 C623 C624 C630 C631 C632 C633 C634 C661 C662 C669 C670 C677 C771 C772 C779 C780 C782 C783
PART NO.
KANRI NO. 87-012-275-080 87-A12-062-080 87-A12-062-080 87-012-188-080 87-012-188-080
DESCRIPTION C-CAP,U 1200P-50 K B GRM CAP,E 100-10 SMG CAP,E 100-10 SMG C-CAP,U 47P-50 J CH C-CAP,U 47P-50 J CH CAP, U 6800P-50 CAP, U 6800P-50 CAP,E 100-10 SMG CAP,E 0.33-50 SMG CAP,E 0.33-50 SMG C-CAP,U 0.022-25 K B C-CAP,U 0.1-16 Z F C-CAP,U 0.01-25 K B CAP,E 1-50 SMG C-CAP, U 470P-50 J CH CAP,E 0.1-50 SMG CAP,E 0.1-50 SMG C-CAP,U 82P-50 CH C-CAP,U 82P-50 CH CAP, U 0.01-25 CAP, U 0.01-25 CAP, U 0.01-25 CAP, U 0.01-25 C-CAP,U 2200P-50 B C-CAP,U 2200P-50 B CAP,E 10-50 SMG CAP,E 10-50 SMG CAP,E 22-25 SMG C-CAP,U 2700P-50 B C-CAP,U 2700P-50 B C-CAP,U 2700P-50 B CAP, U 0.01-25 CAP,M 5600P-100 J CP CHIP CAP,U 1000P-50B CAP, U 560P-50 C-CAP,U 0.1-16 Z F C-CAP,S 390P-50 J CH GRM C-CAP,S 390P-50 J CH GRM CAP, CER 470P-50V C-CAP,U 3300P-50 K B C-CAP,U 3300P-50 K B C-CAP,U 0.015-25 K B GRM C-CAP,U 0.015-25 K B GRM CAP,E 0.22-50 SMG CAP,E 0.22-50 SMG CAP,E 0.22-50 SMG CAP,E 0.22-50 SMG CAPACITOR CHIP U 10P CH CAP,E 470-10 M SMG CAP,E 470-10 M SMG CAP,E 10-50 SMG CAP,E 100-10 M 11L SME CAP,M 0.047-100 JP CAP,M 0.047-100 JP C-CAP,S 0.1-25 K B C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U 3900P-50 K B GRM 3900P-50 K B GRM 0.033-16 K B 0.033-16 K B 330P-50 J SL
REF. NO. C784 C785 C786 C788 C789 C789 C790 C790 C791 C792 C793 C795 C796 C797 C798 C799 C799 C800 C801 C802 C803 C804 C807 C808 C809 C810 C814 C815 C816 C818 C821 C823 C823 C824 C825 C831 C842 C844 C850 C851 C852 C853 C858 C859 C860 C869 C870 C871 C872 C873 C874 C875 C876 C877 C878 C879 C901 C904 C905 C907 C908 C909 C910 C911 C912 C913 C914 C915 C916 C917
PART NO.
KANRI NO. 87-012-286-080 87-012-286-080 87-012-286-080 87-012-167-080 87-A12-052-080
DESCRIPTION CAP, U 0.01-25 CAP, U 0.01-25 CAP, U 0.01-25 C-CAP,U 5P-50 CH C-CAP,S 0.033-25 J B C-CAP,U 0.022-25 J B GRM C-CAP,S 0.033-25 J B C-CAP,U 0.022-25 J B GRM C-CAP,U,0.1-16F CAP, U 0.01-25 CAP,E 4.7-50 SMG CAP, U 0.01-25 CAP, U 0.01-25 CAP,E 10-50 SMG CAP, U 0.01-25 CAP,E 33-50 SMG CAP,E 33-16 M 11L SME<305EZ> CAP, U 0.047-16 CAP,E 3.3-50 SMG CAP, U 0.047-16 CAP, U 0.022-25 K B CAP,E 100-10 SMG CAP,E 0.47-50 SMG CAP,E 1-50 SMG CAP,E 1-50 SMG C-CAP,U,0.1-16F CAP, U 0.01-25 CAP,E 0.47-50 SMG CAP,E 0.47-50 SMG C-CAP,U 1500P-50 K B CAP,E 10-50 SMG C-CAP,S 820P-50 J SL C2012 C-CAP,S 1000P-50 J CH GRM CAP,E 4.7-50 SMG C-CAP,S 0.047-16 K R C2012 CAP,E 22-50 SMG CAP, U 0.01-25 CAP, U 0.01-25 CAP,E 47-25 SMG CAP, U 0.01-25 CAP, U 0.01-25 CAP, U 0.01-25 C-CAP,U 0.1-16 Z F C-CAP,U 0.1-16 Z F C-CAP,U 0.01-25 K B C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U 0.01-25 K B<305EZ> 1000P-50 K B<305EZ> 220P-50 J CH<305EZ> 220P-50 J CH<305EZ> 470P-50 J CH<305EZ>
87-012-284-080 87-012-284-080 87-A12-062-080 87-A12-085-080 87-A12-085-080 87-010-787-080 87-010-831-080 87-012-286-080 87-A12-087-080 87-A10-039-080 87-A12-083-080 87-A12-083-080 87-012-193-080 87-012-193-080 87-012-286-080 87-012-286-080 87-012-286-080 87-012-286-080 87-012-278-080 87-012-278-080 87-A12-091-080 87-A12-091-080 87-A12-069-080 87-012-279-080 87-012-279-080 87-012-279-080 87-012-286-080 87-A12-361-080 87-012-274-080 87-012-271-080 87-010-831-080 87-012-158-080 87-012-158-080 87-018-127-080 87-012-280-080 87-012-280-080 87-010-785-080 87-010-785-080 87-A12-084-080 87-A12-084-080 87-A12-084-080 87-A12-084-080 87-012-172-080 87-016-459-080 87-016-459-080 87-A12-091-080 87-010-263-080 87-A12-372-080 87-A12-372-080 87-016-669-080 87-012-281-080 87-012-281-080 87-A11-070-080 87-A11-070-080 87-012-336-080 87-012-336-080 87-012-274-080 87-012-274-080 87-012-286-080 87-A12-062-080 87-012-286-080 87-010-949-080 87-010-949-080 87-012-286-080 87-012-286-080
87-016-118-080 87-A12-052-080 87-016-118-080 87-010-831-080 87-012-286-080 87-A12-090-080 87-012-286-080 87-012-286-080 87-A12-091-080 87-012-286-080 87-A12-093-080 87-010-265-080 87-010-829-080 87-A12-089-080 87-010-829-080 87-010-787-080 87-A12-062-080 87-A12-086-080 87-A12-087-080 87-A12-087-080 87-010-831-080 87-012-286-080 87-A12-086-080 87-A12-086-080 87-012-276-080 87-A12-091-080 87-010-177-080 87-012-349-080 87-A12-090-080 87-010-596-080 87-A12-092-080 87-012-286-080 87-012-286-080 87-A12-071-080 87-012-286-080 87-012-286-080 87-012-286-080 87-010-831-080 87-010-831-080 87-012-286-080 87-012-286-080 87-012-274-080 87-012-199-080 87-012-199-080 87-A10-039-080 87-A12-091-080 87-010-759-080 87-A12-091-080 87-012-286-080 87-012-184-080 87-012-180-080 87-018-145-080 87-012-286-080 87-012-286-080 87-012-286-080 87-A10-915-080 87-012-286-080 87-012-174-080 87-012-170-080 87-012-195-080 87-012-286-080 87-012-166-080 87-012-174-080 87-012-180-080 87-012-186-080
CAP,E 10-50 SMG<305EZ> C-CAP,U 0.1-25 Z F<305EZ> CAP,E 10-50 SMG C-CAP,U 0.01-25 K B<305EZ> C-CAP,U 33P-50 J CH<305EZ> C-CAP,U 22P-50 J CH<305EZ> CAP,TC-U 6.8P-50 CH C-CAP,U 0.01-25 C-CAP,U 0.01-25 C-CAP,U 0.01-25 C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U 1000P-25 J CH 0.01-25 12P-50 J CH 8P-50 CH 100P-50CH 0.01-25 4P-50 C CH 12P-50 J CH 22P-50 CH 39P-50 CH
C-CAP,U 330P-50 J SL C-CAP,U 1000P-50 K B C-CAP,U 1000P-50 K B CAP, U 0.01-25 CAP,E 100-10 SMG CAP, U 0.01-25 C-CAP,S 0.01-50 J B C-CAP,S 0.01-50 J B CAP, U 0.01-25 CAP, U 0.01-25
7
REF. NO. C918 C921 C922 C940 C942 C947 C948 C952 C957 C958 C959 C960 C961 C962 C963 C971 C972 C973 C974 C979 C981 C982 C983 C984 C985 C987 C989 C991 C992 C993 C995 C997 C998 C999 CF831 CF831 CF832 CF832 CN301 CN351 CN601 CN602 CNA001 D902 D903 FC602 FFE831 J201 J201 J203 J205 J602 J831 J832 JR123 JR123 JR124 JR124 L201 L202 L451 L801 L802 L811 L832 L861 L902 L903 L904 L905
PART NO.
KANRI NO. 87-A10-039-080 87-012-195-080 87-012-174-080 87-012-286-080 87-012-165-080 87-012-286-080 87-A10-039-080 87-012-286-080 87-012-174-080 87-012-286-080 87-010-831-080 87-010-831-080 87-012-167-080 87-A12-087-080 87-015-785-080 87-A12-067-080 87-A12-090-080 87-012-286-080 87-012-286-080 87-012-195-080 87-A12-071-080 87-010-831-080 87-012-286-080 87-012-286-080 87-012-195-080 87-012-286-080 87-012-286-080 87-012-176-080 87-012-176-080 87-012-274-080 87-012-274-080 87-010-831-080 87-A12-071-080 87-A11-155-080 87-008-261-010 87-008-423-010 87-008-261-010 82-785-747-010 87-A60-620-010 87-A60-625-010 87-099-719-010 87-A60-131-010 8A-NF8-653-010 87-A40-128-080 87-A40-128-080 88-906-251-110 A8-6ZA-19H-030 87-A61-480-010 87-A60-488-010 87-A60-238-010 87-A60-881-010 87-A60-881-010 87-A60-202-010 87-A60-403-010 87-012-195-080 87-A10-596-080 87-012-195-080 87-A10-596-080 87-A50-610-010 87-A50-610-010 87-007-342-010 87-A50-608-010 87-A91-551-010 87-005-847-080 87-005-847-080 87-005-847-080 88-ZA1-602-110 88-ZA1-601-010 87-005-847-080 88-ZA1-624-010
DESCRIPTION C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U 470P-50 J CH 100P-50CH 12P-50 J CH CHJ 0.01-25 K B 3P-50 C CH 0.01-25 K B 470P-50 J CH 0.01-25 K B 12P-50 J CH 0.01-25 K B
REF. NO. L906 L941 L942 L951 L951 R129 R129 R129 R130 R130 R130 R131 R131 R131 R132 R132 R132 R243 R243 R243 R244 R244 R244 R245 R245 R245 R245 R246 R246 R246 R246 R790 R991 R993 R995 SFR451 SFR452 TC942 TH101 TH102 WH1 W99 X862 X992 FRONT C.B C108 C153 C154 C155 C156 C301 C351 C361 C362 C371 C372 C601 C801 C802 C803 C804 C805 C806 C807 C808 C809 C810 C811
PART NO.
KANRI NO. 88-ZA1-603-010 87-A50-020-010 87-A50-019-010 8A-NF8-667-010 8A-NF8-668-010 87-A00-257-080 87-A00-258-080 87-A00-262-080 87-A00-257-080 87-A00-258-080 87-A00-262-080 87-A00-257-080 87-A00-258-080 87-A00-262-080 87-A00-257-080 87-A00-258-080 87-A00-262-080 87-A00-440-050 87-A00-439-050 87-A00-999-050 87-A00-440-050 87-A00-439-050 87-A00-999-050 87-A00-440-050 87-A00-441-050 87-A00-439-050 87-A00-999-050 87-A00-440-050 87-A00-441-050 87-A00-439-050 87-A00-999-050 87-012-286-080 87-012-195-080 87-012-195-080 87-012-195-080 87-024-435-080 87-024-435-080 87-A91-774-080 87-A91-042-080 87-A91-042-080 87-A90-510-010 8A-NF9-609-010 87-A70-307-010 87-A70-306-010
DESCRIPTION COIL,FM-OSC-U 2G COIL,ANT LW (COI) 252KHZ COIL,OSC LW (COI) 856KHZ COIL,AM PACK 4(TOK) COIL,AM PACK 2(TOK) RES,M/F RES,M/F RES,M/F RES,M/F RES,M/F RES,M/F RES,M/F RES,M/F RES,M/F RES,M/F 0.15-1W 0.22-1W 0.15-2W 0.15-1W 0.22-1W 0.15-2W 0.15-1W 0.22-1W 0.15-2W 0.15-1W J<300U> J J J<300U> J J J<300U> J J J<300U>
C-CAP,U,0.1-16F C-CAP,U,0.1-16F C-CAP,U 5P-50 CH CAP,E 1-50 SMG CHIP CAPACITOR, 0.1-25 Z F CAP,E 330-16 SMG CAP,E 4.7-50 SMG CAP, U 0.01-25 CAP, U 0.01-25 C-CAP,U 100P-50CH CAP,E 47-25 SMG C-CAP,U,0.1-16F CAP, U 0.01-25 K B CAP, U 0.01-25 K B C-CAP,U 100P-50 J CH CAP, U 0.01-25 K B C-CAP, U 0.01-25 K B C-CAP,U 15P-50 J CH C-CAP,U 15P-50 J CH CHIP CAP,U 1000P-50B CHIP CAP,U 1000P-50B C-CAP,U,0.1-16F CAP,E 47-25 SMG CAP,TC U 0.01-16 Z F FILTER, SFE10.7MA5-A FILTER, CF SFE10.7MS3G-A FILTER, SFE10.7MA5-A CF,MS2 GHY,R CONN,3P V 2MM JMT CONN,8P V 2MM JMT CONN,30P TYK-B(X) CONN,6P V FE CONN ASSY,9P TID-A(480) C-VARI-CAP,HVU202A C-VARI-CAP,HVU202A FF-CABLE, 6P 1.25 6ZA-1 FEMENM JACK,DIA 6.3BLK ST W/SW JACK,DIA 6.3BLK ST W/SW<305EZ> TERMINAL,SP 4P (MSC) JACK,PIN 2P MSP 242V05 PBSN<305U> JACK,PIN 2P MSP 242V05 PBSN TERMINAL,ANT 4P MSP-154V-02 TERMINAL,ANT PAL 2P HSP-312V05 C-CAP,U 100P-50 J CH C-CAP,S 100P-100 J CH C-CAP,U 100P-50 J CH C-CAP,S 100P-100 J CH COIL,1UH K(MDEC) COIL,1UH K(MDEC) COIL,OSC 85KHZ BIAS COIL,FM DET-N(TOK) FLTR,PCFJZH-450 L(TOK) COIL,2.2UH CECS COIL,2.2UH CECS COIL,2.2UH K CECS<305EZ> COIL,FM-RF-U2 2G COIL,FM-RF-U1 2G COIL,2.2UH(CECS) COIL,FM IFT 7-6.2 (COILS)
RES,M/F 0.22-1W J RES,M/F 0.15-2W J RES,220-1/2W J RP RES,180-1/2W J RP<300EZ> RES,180-1/2W J BLT2J<305EZ> RES,220-1/2W RES,180-1/2W RES,180-1/2W RES,220-1/2W RES,270-1/2W RES,180-1/2W RES,180-1/2W RES,220-1/2W RES,270-1/2W RES,180-1/2W J J J J J J J J J J RP RP<300EZ> BLT2J<305EZ> RP RP RP<300EZ> BLT2J<305EZ> RP RP RP<300EZ>
RES,180-1/2W J BLT2J<305EZ> CAP, U 0.01-25 C-CAP,U 100P-50CH C-CAP,U 100P-50CH C-CAP,U 100P-50CH SFR,33K H RH063MC SFR,33K H RH063MC TRIMMER, PLY 30P 6.8X5.4 CDYL C-THMS,100K 55001 C-THMS,100K 55001 HLDR,WIRE 2.5-9P F-CABLE,9P 2.5 480MM VIB,XTAL 4.332MHZ CSA-309ST<305EZ> VIB,XTAL 4.500MHZ CSA-309ST
87-010-785-080 87-010-787-080 87-A12-078-040 87-010-404-040 87-010-404-040 87-012-278-080 87-A10-353-080 87-012-274-080 87-012-274-080 87-012-274-080 87-012-274-080 87-010-382-040 87-A10-804-080 87-010-316-080 87-012-280-080 87-A10-592-080 87-012-184-080 87-012-274-080 87-012-274-080 87-010-544-040 87-010-404-040 87-012-286-080 87-A12-052-080
C-CAP,U 0.015-25 K C-CAP,U 0.022-25 K CAP,E 47-35 SMG CAP,E 4.7-50 M 11L CAP,E 4.7-50 M 11L C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U
B GRM B SME SME
2200P-50 K B 0.22-10 K B 1000P-50 K B 1000P-50 K B 1000P-50 K B K B B CH GRM K B
C-CAP,U 1000P-50 CAP,E 22-25 SME C-CAP,S 0.1-25 J C-CAP,S 33P-50 J C-CAP,U 3300P-50
C-CAP,S 0.015-50 J B C-CAP,U 33P-50 J CH C-CAP,U 1000P-50 K B C-CAP,U 1000P-50 K B CAP,E 0.1-50 M 11L SME CAP,E 4.7-50 SME C-CAP,U 0.01-25 K B C-CAP,S 0.033-25 J B
8
REF. NO. C901 C902 C903 C904 C905 C906 C907 C908 C909 C910 C911 C912 C913 C914 C915 C916 C917 C919 C920 C921 C951 C952 C953 C961 C962 C963 CN104 CN701 CN731 FC104 FC731 FL901 L951 LED209 S321 S321 S322 S322 S323 S323 S324 S324 S325 S325 S326 S326 S327 S327 S328 S328 S329 S329 S330 S330 S331 S331 S332 S332 S333 S333 S334 S334 S341 S341 S342 S342 S343 S343 S344 S344
PART NO.
KANRI NO. 87-012-195-080 87-012-195-080 87-012-195-080 87-012-195-080 87-012-195-080 87-012-195-080 87-012-195-080 87-012-195-080 87-012-195-080 87-012-195-080
DESCRIPTION C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U 100P-50 100P-50 100P-50 100P-50 100P-50 100P-50 100P-50 100P-50 100P-50 100P-50 CH CH CH CH CH CH CH CH CH CH
REF. NO. S345 S345 S346 S346 S347 S347 S348 S348 S349 S349 S350 S351 S352 S361 S371 PT C.B C85 CN1 PT1 PT1 PT1 PT1 PT2 PT81 PT81 PT81 RY1 RY81 RY81 S1 T1 T2 T81 T82 WH81 DECK C.B CN1 SFR1 SOL1 SOL2 SW1 SW2 SW3 SW4 SW5
PART NO.
KANRI NO. 87-A90-095-080 87-A90-164-080 87-A90-095-080 87-A90-164-080 87-A90-095-080 87-A90-164-080 87-A90-095-080 87-A90-164-080 87-A90-095-080 87-A90-164-080
DESCRIPTION SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,RTRY SW,RTRY EVQ11G04M SKQNAB(N)<305EZ> EVQ11G04M SKQNAB(N)<305EZ> EVQ11G04M SKQNAB(N)<305EZ> EVQ11G04M SKQNAB(N)<305EZ> EVQ11G04M SKQNAB(N)<305EZ> SKQNAB(N)<305EZ> SKQNAB(N)<305EZ> SKQNAB(N)<305EZ> XRE012103PVB30F-24 XRE012103PVB30F-12
87-012-274-080 87-010-831-080 87-A10-189-040 87-A10-189-040 87-010-831-080 87-010-831-080 87-010-831-080 87-012-286-080 87-010-829-080 87-012-282-080 87-012-172-080 87-010-854-080 87-012-349-080 87-010-378-040 87-012-336-080 87-010-831-080 87-A60-057-010 87-099-720-010 87-099-196-010 88-911-101-110 88-908-301-110 8B-NF9-605-010 87-A50-655-010 87-A40-317-080 87-A90-095-080 87-A90-164-080 87-A90-095-080 87-A90-164-080 87-A90-095-080 87-A90-164-080 87-A90-095-080 87-A90-164-080 87-A90-095-080 87-A90-164-080 87-A90-095-080 87-A90-164-080 87-A90-095-080 87-A90-164-080 87-A90-095-080 87-A90-164-080 87-A90-095-080 87-A90-164-080 87-A90-095-080 87-A90-164-080 87-A90-095-080 87-A90-164-080 87-A90-095-080 87-A90-164-080 87-A90-095-080 87-A90-164-080 87-A90-095-080 87-A90-164-080 87-A90-095-080 87-A90-164-080 87-A90-095-080 87-A90-164-080 87-A90-095-080 87-A90-164-080 87-A90-095-080 87-A90-164-080
C-CAP,U 1000P-50 K B C-CAP,U 0.1-16 Z F CAP,E 220-10 M 5L CAP,E 220-10 M 5L C-CAP,U 0.1-16 Z F C-CAP,U C-CAP,U C-CAP,U C-CAP,U C-CAP,U 0.1-16 Z F 0.1-16 Z F 0.01-25 K B 0.047-16 Z F 4700P-50 K B
! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
87-A90-164-080 87-A90-164-080 87-A90-164-080 87-A92-041-010 87-A92-040-010
C-CAP,U 10P-50 D CH C-CAP,S 560P-50 J CH C-CAP,S 1000P-50 J CH GRM CAP,E 10-16 M 11L SME C-CAP,U 330P-50 J SL C-CAP,U 0.1-16 Z F CONN,11P V 9604S-11C CONN,30P BLK TYK-B(P) CONN,8P V BLK 6216 FF-CABLE,11P 1.25 FF-CABLE,8P 1.25 FL,BJ814GNK COIL,CLK 4.19M (TOKO)7KLY LED,SLR-342VCT31 RED SW,TACT EVQ11G04M SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SW,TACT SKQNAB(N)<305EZ> EVQ11G04M SKQNAB(N)<305EZ> EVQ11G04M SKQNAB(N)<305EZ> EVQ11G04M SKQNAB(N)<305EZ> EVQ11G04M SKQNAB(N)<305EZ> EVQ11G04M SKQNAB(N)<305EZ> EVQ11G04M SKQNAB(N)<305EZ> EVQ11G04M SKQNAB(N)<305EZ> EVQ11G04M SKQNAB(N)<305EZ> EVQ11G04M SKQNAB(N)<305EZ> EVQ11G04M SKQNAB(N)<305EZ> EVQ11G04M SKQNAB(N)<305EZ> EVQ11G04M SKQNAB(N)<305EZ> EVQ11G04M SKQNAB(N)<305EZ> EVQ11G04M SKQNAB(N)<305EZ> EVQ11G04M SKQNAB(N)<305EZ> EVQ11G04M SKQNAB(N)<305EZ> EVQ11G04M SKQNAB(N)<305EZ>
87-010-831-080 87-A61-110-010 8B-NFY-610-010 8B-NF9-612-010 8B-NF9-615-010 8B-NF9-616-010 8B-NF9-663-010 8B-NF9-661-010 8B-NF9-665-010 8B-MA6-675-010 87-A91-339-010 87-A92-072-010 87-A91-418-010 87-A90-165-010 87-A60-317-010 87-A60-317-010 87-A60-317-010 87-A60-317-010 87-A90-510-010
C-CAP,U 0.1-16 Z F CONN,9P V TID-A PT, BNF-Y U<300U> PT, BNF-9 U<305U> PT, BNF-9 LH PT, BNF-9 EZ-LOW PT,SUB BNF H (TAM) PT,SUB BNF U (TAM) PT,SUB BNF E (TAM)<300EZ> PT,SUB BMA E (VRK)<305EZ> RELAY,AC DC12V G5PA-2 RELAY,AC DC12V HRM3H-S-1POLE RELAY,AC 12V G5PA-1-M SW,SL 1-2-3 SWS2301 TERMINAL, 1P MSC TERMINAL, TERMINAL, TERMINAL, HLDR,WIRE 1P MSC 1P MSC 1P MSC 2.5-9P
87-099-753-010 87-024-581-010 82-ZM1-618-410 82-ZM1-618-410 87-A90-673-010 87-A91-500-010 87-A91-500-010 87-A91-500-010 87-A90-673-010
CONN,11P 9604 SFR,3.3K DIA 6H SOL ASSY, 27 SOL ASSY, 27 SW,MICRO ESE11SH1C SW,MICRO SW,MICRO SW,MICRO SW,MICRO MPU11470MLB0 MPU11470MLB0 MPU11470MLB0 ESE11SH1C
9
CHIP RESISTOR PART CODE
Chip Resistor Part Coding
8 8
A
Resistor Code Value of resistor Chip resistor
Dimensions (mm)
Figure
Wattage 1/16W 1/16W 1/10W 1/8W
Type 1005 1608 2125 3216
Tolerance 5% 5% 5% 5%
Symbol CJ CJ CJ CJ
Form
L W
L 1.0
t
W 0.5 0.8 1.25 1.6
t 0.35 0.45 0.45 0.55
:A Resistor Code : A
104 108 118 128
1.6 2 3.2
TRANSISTOR ILLUSTRATION
E C B
E C B
E B C
E C B
CDA1585BC KTC3198GR
2SC5343G CC5551
2SA1980G 2SA1981Y
CSC4115BC
S
D
C
D G S D G
G S
B E
2SK360E
2SJ460 2SK2541
2SK2158
2SA1235F 2SC2714(O) 2SC3052F CMBT5401 CMBT5551 CSD1306E DTC114YK
DTC114YKA KRA102S KRC102S-RTK KRC104S KRA107S RT1P141C
B C E
G D S
B C E
2SB1686 2SD2642
2SK2937
CSB1370EF
10
FL (BJ814GNK) GRID ASSIGNMENT AND ANODE CONNECTION
GRID ASSIGNMENT
11
ANODE CONNECTION
12
WIRING 1 (MAIN)
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F
(VT)
G H I J K L M N O
~
P Q R S T U
13
SCHEMATIC DIAGRAM 1 (MAIN 1 / 2 : AMP)
14
SCHEMATIC DIAGRAM 2 (MAIN 2 / 2 : TUNER)
15
WIRING 2 (MAIN)
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F G H I J K L M N O P Q R S T U
16
SCHEMATIC DIAGRAM 3 (MAIN 1 / 2 : AMP)
17
SCHEMATIC DIAGRAM 4 (MAIN 2 / 2 : TUNER)
18
WIRING 3 (FRONT)
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F G H I J K L M N O P Q R S T U
19
SCHEMATIC DIAGRAM 5 (FRONT)
20
WIRING 4 (PT)
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F G H I J K L M N O P Q R S T U
21
SCHEMATIC DIAGRAM 6 (PT)
22
WIRING 5 (PT)
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A B C D E F G H I J K L M N O P Q R S T U
23
SCHEMATIC DIAGRAM 7 (PT)
24
WIRING 6 (DECK)
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 A B
TO FRONT C.B CN104
D DECK C.B
SW5 SW4
1 2 3 4 5 6
(FC104)
C D
7 8
9
11 10
SW3
SW2
SW1
E
CN1 (CAM2) (CST2) SOL2
1
(REA)
L
H
+
(CST1)
(CAM1)
F
1
IC2
3
SFR1 R1
IC1
3
SOL1
G H I
W1
+
H L
M1 DECK MOTOR
J K L M N O P Q R S T U
25
IC BLOCK DIAGRAM
26
27
IC DESCRIPTION
IC, µPD780226GF-021-3BA, IC, µPD780228GF-078-3BA<305EZ> Pin No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43
Pin Name
O-MOTOR O-SOL1 O-SOL2 O-STBY NC O-PB1 NC NC NC NC O-TU_ON O-MUTE O-KSCAN O-BIAS O-RMT NC IC VSSO VDDO O-POWER NC NC NC I-SUBQ I-WRQ I-DRF I-REA I-RDS_CLK I-RDS_DATA RESET O-DSC/O-DATA O-CLK_SFT I-IFC I-RMC I-DISH I-STEREO VDD1 X2 X1 VSS1 AVDD I-HOLD I-CDSW
I/O
O O O O O O O O O O O I I I I I I O O I I I I I I DECK MOTOR ON/OFF output. DECK1 solenoid ON/OFF output. DECK2 solenoid ON/OFF output.
Description
STANDBY LED (Echo mode) output (ON/OFF). Not connected. DECK1 playback switch output (ON/OFF). Not connected. Not connected. Not connected. Not connected. TUNER ON/OFF switch output. System MUTE ON/OFF output. Switch SCAN timing output. DECK2 BIAS ON/OFF output. DECK2 REC MUTE ON/OFF output. Not connected. Internal connection (connected to GND). GND. Power supply. System power supply ON/OFF output. Not connected. Not connected. Not connected. CD SUBQ data input. CD interrupt signal input. CD focus ON detect data input. DECK2 sideA record OK switch data input. Tuner RDS clock input <305EZ only>. Tuner RDS data input <305EZ only>. System reset input (ON/OFF). Function IC/Tuner IC, DATA output. MICON clock shift output. Tune IF count serial data input. System remote control signal input. CD turntable photo sensor input A/D converter input. Tuner STEREO detect input. Power supply. 4.19MHz oscillator circuit. 4.19MHz oscillator circuit. GND. Power supply. Power failure detected input. CD mecha switch A/D converter input.
28
Pin No.
44 45 46 47 48 49 50 51 52 53, 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74, 75 76 77, 78 79 80 81 82 83 ~ 92 93 ~100
Pin Name
I-SPEANA_1 I-SPEANA_2 I-KEY1 I-KEY2 I-SPEANA_3 I-TU_SIG AVSS O-PLL_CLK O-PLL_CE P1, P2 O-CD_CLK O-CD_DATA O-CD_CE P3 I-JOG_B I-JOG_A I-VOL_B I-VOL_A P4 I-TM_BASE P5/I-CAM2 P6/I-CAM1 P7/I-AUTO2 P8/I-AUTO1 P9/I-CST2 P10/I-CST1 P11/AM10K P12 P13/LW P14, P15 P16/RDS P17, P18 VDD2 VLOAD P19/C-JACK P20/ECO-OFF P21 ~ P30 G1 ~ G8
I/O
I I I I I I O O O O O O O I I I I O I O/I O/I O/I O/I O/I O/I O/I O O/I O O/I O O/I O/I O O
Description
A/D input for spectrum analyser level display. A/D input for spectrum analyser level display. Key A/D input 1. Key A/D input 2. A/D input for spectrum analyser level display. Tuner signal input <305EZ only>. GND. PLL IC clock enable output. PLL IC chip enable output. FL segment P1, P2 output. CD clock output. CD data output. CD chip enable output. FL segment P3 output. Dial jog rotary encoder input B. Dial jog rotary encoder input A. Volume rotary encoder input B. Volume rotary encoder input A. FL segment P4 output. Base input for clock. FL segment P5 output / DECK2 CAM STOP switch data input. FL segment P6 output / DECK1 CAM STOP switch data input. FL segment P7 output / DECK2 AUTO STOP switch data input. FL segment P8 output / DECK1 AUTO STOP switch data input. FL segment P9 output / DECK2 cassette detect switch data input. FL segment P10 output / DECK1 cassette detect switch data input. FL segment P11 output / AM10K input to diode . FL segment P12 output. FL segment P13 output / LW input to diode . FL segment P14, P15 output. FL segment P16 output / RDS input to diode <305EZ only>. FL segment P17, P18 output. Power supply. Power supply for FL display. FL segment P19 output / C-JACK data input . FL segment P20 output / ECO-OFF data input . FL segment P21 ~ P30 output. FL grid G1 ~ G8 output.
29
ADJUSTMENT
< TUNER SECTION >
1. Clock Frequency Check Settings : · Test point : TP2 (CLK) Method : Set to AM 1710kHz(U,LH), MW 1602kHz(EZ) and check that the test point is 2160kHz ± 45Hz(U,LH), 2052kHz ± 45Hz(EZ). 2. AM(MW) VT Check Settings : · Test point : TP1 (VT) Method : Set to AM 1710kHz(U,LH), MW 1602kHz(EZ) and check that the test point is less than 8.5V(U,LH), less than 8.0V(EZ). Then set to AM 530kHz(U,LH), MW 531kHz (EZ) and check that the test point is more than 0.6V. 3. LW VT Adjustment Settings : · Test point : TP1 (VT) · Adjustment location : L942 Method : Set to LW 144kHz and adjust L942 so that the test point becomes 1.3V ± 0.05V. Then set to LW 290kHz and check that the test point is less than 8.0V. 4. FM VT Adjust Settings : · Test point : TP1 (VT) · Adjustment location : L906 Method : Set to FM 87.5MHz, 108.0MHz and adjust L906 so that the test point becomes more than 0.4V (87.5MHz) and equals to 7.0V ± 0.1V (108.0MHz). 5. FM VT Check Settings : · Test point : TP1 (VT) Method : Set to FM 87.5MHz, 108.0MHz and check that the test point is more than 0.5V (87.5MHz) and less than 8.0V (108.0MHz). 6. AM(MW) Tracking Adjustment Settings : · Test point : TP8(Lch), TP9(Rch) · Adjustment location : L951(1/3) Method : Set to AM 1000kHz(U,LH), MW 999kHz(EZ) and adjust L951(1/3) to MAX. 7. LW Tracking Adjustment Settings : · Test point : TP8(Lch), TP9(Rch) · Adjustment location : L941 ..........................................................144kHz TC942 ........................................................290kHz Method : Set up TC942 to center before adjustment. Adjust L941 so that the level at 144kHz becomes maximum. Then adjust TC942 so that the level at 290kHz becomes maximum. 8. FM Tracking Adjustment Settings : · Test point : TP8(Lch), TP9(Rch) · Adjustment location : L903 Method : Set to FM 87.5MHz and adjust L903 so that the test point becomes maximum. 9. FM Tracking Check Settings : · Test point : TP8(Lch), TP9(Rch) Method : Set to FM 98.0MHz and check that the test point is less than 13dBµV. 10. AM IF Adjustment Settings : · Test point : TP8(Lch), TP9(Rch) · Adjustment location : L802 .............................................. .450kHz. 11. DC Balance / Mono Distortion Adjustment Settings : · Test point : TP3, TP4 (DC Balance) TP8(Lch), TP9(Rch) (Distortion) · Adjustment location : L801 · Input level : 60dBµV Method : Set to FM 98.0MHz and adjust L801 so that the voltage between TP3 and TP4 becomes 0V ± 500mV. Next, check that the distortion is less than 1.2%.
< FRONT SECTION >
12.
µ-CON
OSC Adjustment Settings : · Test point : TP11 (KEY-SCAN), (GND) · Adjustment location : L951 Method : Connect a frequency counter across TP11 (KEY-SCAN) and GND. Insert AC plug while pressing POWER key and TUNER function key. Then adjust L951 so that the test point becomes 112.88Hz ± 0.11Hz. To manual reset press POWER key while pressing CLEAR key.
30
< DECK SECTION >
13. Tape Speed Adjustment (DECK 2) Settings : · Test tape : TTA100 · Test point : TP8(Lch), TP9(Rch) · Adjustment location : SFR1 Method : Play back the test tape and adjust SFR1 so that the frequency counter reads 3000Hz ± 5Hz. 14. Head Azimuth Adjustment (DECK 1, DECK 2) Settings : · Test tape : TTA330 · Test point : TP8(Lch), TP9(Rch) · Adjustment location : Azimuth adjustment screw Method : Play back (FWD) the 8kHz signal of the test tape and adjust screw so that the output becomes maximum. Next, perform on REV PLAY mode. 15. PB Frequency Response Check (DECK 1, DECK 2) Settings : · Test tape : TTA330 · Test point :TP8(Lch), TP9(Rch) Method : Play back the 315Hz and 8kHz signals of the test tape and check that the output ratio of the 8kHz signal with respect to that of the 315Hz signal is within 5.0dB. 16. PB Sensitivity Check (DECK 1, DECK 2) Settings : · Test tape : TTA200 · Test point : TP8(Lch), TP9(Rch) Method : Play back the test tape and check that the output level of the test point is 110mV ± 3.0dB. 17. REC/PB Frequency Response Adjustment (DECK 2) Settings : · Test tape : TTA602 · Test point : TP8(Lch), TP9(Rch) · Input signal : 1kHz / 8kHz (LINE IN) · Adjustment location : SFR451 (Lch) SFR452 (Rch) Method : Apply a 1kHz signal and REC mode. Then adjust OSC attenuator so that the output level at the TP8, TP9 becomes -20VU (10mV). Record and play back the 1kHz and 10kHz signals and adjust SFRs so that the output of the 10kHz signals becomes 0B ± 1dB with respect to that of the 1kHz signal. 18. REC/PB Sensitivity Check (DECK 2) Settings : · Test tape : TTA602 · Test point : TP8(Lch), TP9(Rch) · Input signal : 1kHz (LINE IN) Method : Apply a 1kHz signal and REC mode. Then adjust OSC attenuator so that the output level at TP8, TP9 becomes 0VU (100mV). Record and play back the 1kHz signal and check that the output is -1dB ± 3.5dB.
31
CD TEST MODE
1. How to Start the CD Test Mode
While pressing the FUNCTION button, insert the AC plug to the power outlet. When the test mode is started, the message [CD TEST] is displayed.
2. How to Exit the CD Test Mode
Press the POWER button or disconnect the AC plug. * When any key other than PLAY is pressed during play mode, the machine exits the test mode.
3. Function Descriptions and Application of the CD Test Mode
No 1 2 Mode Start mode Search mode STOP button Operation Display Function Checking item · FL check · Microprocessor check READING · LD illuminates all the time · Focus search continuous operations *1 · APC circuit check · Laser current measurement · Focus search waveform check (DRF in the search mode is ignored) 3 Play mode RESET button 4 Traverse mode PAUSE button Normal Normal · Normal playback · If TOC cannot be read, focus search is continued · Tracking servo OFF/ON · Each time PAUSE button is pressed, the tracking servo repeats turning OFF/ON 5 Sled mode UP button CD TEST · Pickup moves to the inner circumference *2 the inner circumference DOWN button CD TEST · Pickup moves to the outer circumference *2 At the same time, lens kicks to the outer circumference 6 Spindle mode REC/REC All indicators light · The spindle motor rotates MUTE button forward (rough speed) by pressing the button and rotates backward by pressing one more time and stops by pressing again · Spindle circuit · Spindle motor · Sled circuit check · Tracking circuit check · Pickup check · Tracking balance check · Each servo circuit is checked · DRF check All indicators light · All FL indicators light
· Spindle motor continuous kick · Focus error waveform check
At the same time, lens kicks to · Mechanism operation check
*1: The driver IC heats up and the protection circuit starts working when the focus search is continued for 10 minutes or longer. There can be a case that operations cannot be performed correctly. In such a case, turn off the main power. After cooling down the machine, restart the machine. *2: Be careful not to damage the gear because the sled motor rotates while the UP or DOWN button is being pressed even if the pick-up is located in the innermost track or the outermost track.
32
MECHANICAL EXPLODED VIEW 1 / 1
BZG-5 ZD3NM A A A A PWB WIRE,BINDER 32 33 31 15 G 14 FL901 16 29 30 A A 18 17 13 11 E 5 12 F 22 3 A 23 1 7 2 4 8 D 9 25 PLATE,EARTH MECH 24 26 ZZM-3 PR1NM G 10 21 A HT-SINK 60S 300 EZ E 39 F 20 PWB 27 C 37 28 38 19 A A C 35 36 B A HT-SINK S D 34 A A 305 U A
6
11
A
24
25
A CHAS,MAIN
40
33
MECHANICAL PARTS LIST 1 / 1
REF. NO. PART NO. 1 2 3 4 5 6 7 8 9 10 10 11 12 13 13 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 8B-NF9-008-010 8B-NF9-009-010 8B-NF9-003-110 8B-NF9-004-110 8A-NF8-281-010 8A-NF8-282-010 8B-NF9-020-010 8B-NF9-019-010 8B-NF9-007-010 8B-NF9-032-010 8B-NF9-001-010 8Z-NF6-210-010 87-CE3-023-010 8B-NF9-035-010 8B-NF9-010-010 8B-NF9-037-010 8B-NF9-026-010 8B-NF9-027-010 8B-NF9-011-110 8B-NF9-021-010 8B-NF9-014-010 8B-NF9-013-010 8B-NF9-016-010 8B-NF9-012-010 8B-NF9-018-010 87-NF4-216-010 86-NF9-224-010 82-NF5-229-010 87-NF4-217-110 88-908-301-110
KANRI DESCRIPTION NO. WINDOW,CASS 1 WINDOW,CASS 2 BOX,CASS 1 BOX,CASS 2 SPR-T,EJECT 1 SPR-T,EJECT 2 KNOB,RTRY JOG KNOB,RTRY VOL PANEL,JOG CABI,FR CABI,FR U DMPR,150 N BADGE,AIWA 30N SILV WINDOW,DISP H WINDOW,DISP U<300U> WINDOW,DISP U 305<305U> PANEL,LEFT PANEL,TOP KEY,POWER REFLECTOR,ECO KEY,CD KEY,FUN KEY,OPE P KEY,T-BASS KEY,GEQ HLDR,LOCK 1 SPR-C,LOCK PLATE,LOCK HLDR,LOCK 2 FF-CABLE,8P 1.25
REF. NO. PART NO. 28 29 30 31 32 33 34 34 34 34 35 36 37 38 38 39 39 40 A B C D E F G 88-911-101-110 8B-NF9-207-010 8A-NF8-206-010 8B-NF9-006-010 88-906-251-110 8A-NF9-609-010 8B-NF9-072-010 8B-NF9-071-010 8B-NF9-069-010 8B-NF9-070-010 8B-NF9-211-010 8A-NF9-211-010 87-NF4-221-010 87-A80-092-010 87-A80-110-010 87-085-185-010 87-A91-422-010 8B-NF9-025-010 87-067-703-010 87-NF4-224-010 87-078-200-010 87-067-689-010 87-721-096-410 87-721-097-410 87-067-641-010
KANRI DESCRIPTION NO. FF-CABLE,11P 1.25 GUIDE,FL 90.2-20 HLDR,PWB M PANEL,TRAY FF-CABLE,6P 1.25(RVS-FACE) F-CABLE,9P 2.5 480MM CABI,REAR EZSM CABI,REAR LHSM CABI,REAR USM<300U> CABI,REAR USM 305<305U> HLDR,TR S HLDR,PWB PT HI HLDR,CABLE AC CORD ASSY,E BLK SUN FAI AC CORD ASSY,U SPT-2W BUSHING, AC CORD (E) BUSHING,AC CORD(U) PANEL,RIGHT TAPPING SCREW, BVT2+3-10 S-SCREW,IT3B+3-8 CU S-SCREW,ITC+4-8 R TAPPING SCREW, BVTT+3-8 QT2+3-10 GLD QT2+3-12 GLD UTT2+3-8(W/O SLOT)BL
! !
COLOR NAME TABLE
Basic color symbol Color Basic color symbol Color Basic color symbol Color B Black C Cream D Orange G Green H Gray L Blue LT Transparent Blue N Gold P Pink R Red S Silver ST Titan Silver T Brown V Violet W White WT Transparent White Y Yellow YT Transparent Yellow LM Metallic Blue LL Light Blue GT Transparent Green LD Dark Blue DT Transparent Orange GM Metallic Green YM Metallic Yellow DM Metallic Orange PT Transparent Pink LA Aqua Blue GL Light Green HT Transparent Gray
34
TAPE MECHANISM EXPLODED VIEW 1 / 1
A 34 A 55 43 36 32 41 29 28 39 42 51 35 46 47 40 48 49 41 30 21 20 19 26 25 24 23 18 22 16 b 17 27 37 38 a B 40 47 48 49 21 20 19 18 27 26 25 24 IC, EW732 23 22 IC, EW732 5 6 14 10 11 15 10 7 11 12 8 4 12 13 15 13 6 5 3 2 c 14 9 16 37 PWB c 9 1 38 39 54 54 35 30 28 50 42 46 53 a 43 44 45 52 44 51 45 31 b 32 29 A 33
TERMINAL, LB1 33 31
52
TERMINAL,LB1
35
TAPE MECHANISM PARTS LIST 1 / 1
REF. NO. PART NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 8Z-ZM3-227-010 8Z-ZM3-235-010 8Z-ZM1-235-010 87-045-347-010 8Z-ZM1-232-010 8Z-ZM3-244-010 8Z-ZM3-256-010 8Z-ZM3-255-010 8Z-ZM3-231-010 8Z-ZM3-213-010 82-ZM3-616-010 8Z-ZM3-243-010 8Z-ZM3-238-010 8Z-ZM3-219-010 8Z-ZM3-206-010 8Z-ZM3-209-010 8Z-ZM3-203-010 8Z-ZM1-228-010 8Z-ZM1-265-010 8Z-ZM1-227-010 8Z-ZM1-251-110 8Z-ZM1-275-010 8Z-ZM1-257-010 8Z-ZM1-236-010 8Z-ZM3-226-010 8Z-ZM3-250-010 8Z-ZM1-269-010 8Z-ZM1-238-110 8Z-ZM3-220-010 8Z-ZM3-205-010
KANRI DESCRIPTION NO. BELT,MAIN M3 BELT,MAIN L PULLEY,MOT MOT,SHU2L 70 GEAR,IDL FF/REW GEAR,CAM TD20 FLY-WHL ASSY,M3 R FLY-WHL ASSY,M3 L SPR-T,TRIG CLR,MG RING MAGNET 4 LEVER ASSY,HD UP SPR-T,HD UP GEAR,CAM M3 LEVER,TRIG LEVER,CAM FR CHAS ASSY,M3 GEAR,SLIP T-UP B FELT,T-UP GEAR,SLIP T-UP A SPR-C,T-UP SLIP W-L,1,47-4-0.25 SPR-C,F/R CLR,SLIP FF/REW SPR-C,FR M3 GEAR,SLIP F/R A M3 FELT,FF/REW 2 GEAR,SLIP FF/REW B 2 LEVER,FR M3 LEVER,PLAY M3
REF. NO. PART NO. 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 A B 8Z-ZM3-233-010 84-ZM2-227-310 87-A90-403-110 87-A90-404-010 8Z-ZM3-239-010 8Z-ZM3-211-010 8Z-ZM3-225-010 8Z-ZM3-221-010 8Z-ZM3-234-010 8Z-ZM3-223-010 8Z-ZM1-225-110 8Z-ZM3-240-010 8Z-ZM3-237-010 8Z-ZM3-215-010 8Z-ZM1-261-110 8Z-ZM1-226-010 8Z-ZM3-222-010 8Z-ZM3-251-010 8Z-ZM3-236-010 82-ZM1-240-110 8Z-ZM3-216-010 87-B10-301-010 8Z-ZM3-212-010 8Z-ZM3-214-010 86-ZM3-605-110 84-ZM2-242-010 8Z-ZM2-220-110
KANRI DESCRIPTION NO. SPR-T,BRG M3 SPR-C,AZIMUTH HEAD,RPH MS15R HEAD,EH LE15B SPR-E,FR LEVER,EJECT R LEVER,STOP LEVER,CAS SPR-T,LVR CAS SPR-C,REEL R M3 GEAR,REEL R SPR-T,T-UP M3 SPR-T,PINCH M3 LEVER,PINCH M3 ROLLER ASSY,PINCH GEAR,REEL L SPR-C,REEL L M3 GEAR,IDL REW M3 SPR-T,PLAY M3 LVR,REC(*) LEVER,T-UP M3 W-L,1.63-3.2-05 SLIT LEVER,EJECT L HLDR,IC CONN ASSY,8P -RPB S-SCREW,AZ1-2-6.4 V+2.6 ZZM-2
36
GENERAL SPEAKER DISASSEMBLY INSTRUCTIONS (FOR REFERENCE)
Type.1 Insert a flat-bladed screwdriver into the position indicated by the arrows and remove the panel. Remove the screws of each speaker unit and then remove the speaker units. Type.4
TOOLS
1 Plastic head hammer 2 (() flat head screwdriver 3 Cut chisel
1
2
3
How to Remove the PANEL, FR
Type.2 Remove the grill frame and four pieces of rubber caps by pulling out with a flat-bladed screwdriver. Remove the screws from hole where installed rubber caps. Insert a flat-bladed screwdriver into the position indicated by the arrows and remove the panel. Remove the screws of each speaker unit and then remove the speaker units. 1. Insert the (() flat head screwdriver tip into the gap between the PANEL, FR and the PANEL, SPKR. Tap the head of the (() flat head screwdriver with the plastic hammer head, and create the clearance as shown in Fig-1. Insert the cut chisel in the clearance, and tap the head of the cut chisel with plastic hammer as shown in Fig-2, to remove the PANEL, FR. Place the speaker horizontally. Tap head of the cut chisel with plastic hammer as shown in Fig-3, and remove the PANEL, FR completely.
2.
3.
Type.3 Insert a flat-bladed screwdriver into the position indicated by the arrows and remove the panel. Turn the speaker unit to counterclockwise direction while inserting a flat-bladed screwdriver into one of the hollows around speaker unit, and then remove the speaker unit. After replacing the speaker unit, install it turning to clockwise direction until "click" sound comes out.
Fig-1
Fig-2
Fig-3
How to Attach the PANEL, FR
Attach the PANEL, FR to the PANEL, SPKR. Tap the four corners of the PANEL, FR with the plastic hammer to fit the PANEL, FR into the PANEL, SPKR completely.
37
SPEAKER PARTS LIST SX-NAJ302(YUSC,YUSL,YUSN,YUS1N,YUSC9) SX-NSZ302 (YSC,YSL,YLSC,YLSL,YSC9,YLSC9)
REF. NO. PART NO. 1 2 3 4 4 5 5 6 7 KANRI DESCRIPTION NO. 8B-NSK-001-010 PANEL,FR R 8B-NSK-002-010 PANEL,FR L 8B-NSK-005-010 PROTECTOR, ASSY 8B-NSK-602-010 SPKR,W 160 8B-NSK-608-010 SPKR,W 160 H 8B-NSK-604-010 8B-NSK-610-010 87-NS7-611-010 87-NSH-612-010 SPKR,T 60 SPKR,T 60 CORD,SPKR SPKR,CERAMIC ASSY
SPEAKER PARTS LIST SX-R145(YUSC,YUSN,YUS1N)
REF. NO. PART NO.
1 2 3 4 5
KANRI DESCRIPTION NO. 81-VSA-010-010 SPKR,CORD 87-010-384-010 CAP,E 100-25 M SME 8A-YS4-610-010 CORD,SPKR 3.5 8A-YS4-601-010 SPKR,80 8A-YS4-006-010 GRILLE, FRAME ASSY
ACCESSORIES / PACKAGE LIST
REF. NO. PART NO. 1 1 1 1 2 3 3 3 4 4
!
KANRI DESCRIPTION NO. 8B-NF9-912-010 IB,LH(ESP)M 8B-NF9-913-010 IB,U(ESF)M 8B-NF9-915-010 IB,EZ(9L)M-SZ305<305EZ> 8B-NF9-926-010 IB,EZ(9L)M<300EZ> 8Z-NF9-701-210 RC UNIT,ZAS02 87-006-225-010 87-A92-150-010 87-006-268-010 87-043-115-010 87-A90-118-010 87-A91-017-010 AM,LOOP ANT NC2 ANT,LOOP AM NO-CONT<300EZ> ANT,LOOP AM<305EZ> FEEDER-ANT FM ANT,WIRE FM(Z) PLUG CONVERSION, JT-0476
5
38
211, IKENOHATA 1CHOME, TAITO-KU, TOKYO 110, JAPAN TEL:03 (3827) 3111
9820543 0251431 Printed in Singapore