Text preview for : Service Bulletin OST-898.PDF part of DENON Service Bulletin OST-898 DENON DVD Video Player DVD Video Player Denon - DVD-3910 Service Bulletin OST-898.PDF
Back to : Service Bulletin OST-898. | Home
100 Corporate Drive Mahwah, NJ 07430
Service Bulletin
No. : OST-898
Date: May 30, 2007
_____________________________________________________________
Model: DVD-3910
Subject: Countermeasure for improving blinking IEEE1394 Indication.
Symptom: Under the following condition, the FL Display on the subject model
remains blinking and the sound is not outputted.
1) Connect the DVD-3910 to an AV Amplifier that is conformable to the
IEEE1394 via the IEEE1394 connection, and set to the IEEE1394 mode.
2) Approximately one second after turning off (standby off or turn off the primary
side of the Power supply) the Power of the Amplifier that is conformable to the
IEEE1394, turn off the Power of the DVD-3910 so that it turns into the Standby-
off mode.
3) The IEEE1394 indication on the FL Display of the DVD-3910 remains blinking
and the sound is not output when the Power of the DVD-3910 and the Amplifier
that is conformable to the IEEE1394 were switched on.
Solution: Corrected the standby-off process-software in the System MICON.
Record the supplied file onto a blank CD-R and upgrade your customer's unit
upon claim.
Supplied Program File:
______________________________________________________________________________________
CONFIDENTIALITY NOTICE:
The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss
resulting from the misuse of the information contained in this document.
Note: