Text preview for : 9207SPB-TE.pdf part of MAKITA 9207SPB-TE MAKITA 9207SPB-TE.pdf
Back to : 9207SPB-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. 9207SPB
New Tool
Description 180 mm Sander polisher
CONCEPTION AND MAIN APPLICATIONS
This machine has been for export exclusive type
until now, but also selling for domestic is started.
The sander and polisher can be individually used
by the use of 2-speed and the double insulation
structure can conform to both domestic and foreign
regulation.
Specifications
Voltage(V) Current (A) Frequency (Hz) Continuous rating input(W)
100 6 50-60 570
No load speed 3800/2000 min.
Overall length of machine 460 mm
Weight 3.4 kg
Cord length 2.5 m
Standard equipment
Names Applications Quantity
1 Sanding disc 180-16 For grinding and sanding 2
2 Sanding disc 180-20 For grinding and sanding 2
3 Sanding disc 180-24 For grinding and sanding 2
4 Sanding disc 180-50 For grinding and sanding 2
5 Sanding disc 180-80 For grinding and sanding 2
6 Wool bonnet 180 For polishing 1
7 Lock nut wrench 28 For mounting the rubber pad 1
8 Spanner 17 For mounting the rubber pad 1
Optional accessories
1 Sanding disc 180-30 For grinding and sanding
2 Sanding disc 180-100 For grinding and sanding
3 Sanding disc 180-120 For grinding and sanding
4 Cup wire brush 90 For grinding and sanding
Features and benefits
(1) The double insulation structure provides no concern for getting an electrical shock.
(2) The 2-speed structure enables to select the most suitable rotation for the sander and polisher, thereby the higher
working efficiency achieved.
The standard equipment for the tools shown may differ form country to country
Repair
(1) Replacing of ball bearing 6201LLB inside the bearing box
a. Disconnect the mounting screws M4x14(4 pieces) on the bearing box.
b. Separate the bearing box from the gear housing and disconnect the circle clip(shaft)12 mounting the spiral bevel
gear to remove the spiral bevel gear from the spindle.
c. Use the hand press to disconnect the spindle from the bearing box, turn the bearing retainer 22-34 in left to take
away it, and then replace the ball bearing 6201LLB. For assembling, proceed in the reverse orders against said
procedures.
(2) Replacing of ball bearing 6002LLB at fan side of armature
a. Disconnect the bearing box and then remove the gear housing from the gear housing cover.
b. Turn right the bearing retainer 19-33 on the gear housing cover to remove it, remove the circle clip(shaft)15
holding the ball bearing 6002LLB from the armature shaft, and then disconnect the armature from the gear
housing cover to replace the ball bearing 6002LLB