Text preview for : 1155030A.PDF part of Minolta 1155030A Minolta Copiers Di620 1155030A.PDF



Back to : 1155030A.PDF | Home

MINOLTA CO., LTD., SERVICE ENGINEERING DIVISION
PAGE NO. : 1/3
SERVICE BULLETIN
PROBLEM FUNCTION SAFETY

SERVICEABILITY OTHERS

MODEL NAME : Di620 OTHERS PERFORMANCE CORRECTION

SAFETY REGULATION OTHERS
MODEL CODE : 1155
NO. : 030A
DATE : 990408
SUBJECT : PROVISIONS FOR NEW BLUE ANGEL MARK


The materials used for exterior covers and labels have been changed to enhance recyclability, thereby meeting the
requirements of the new blue angel mark. The products that meet the new blue angel mark requirements will be
marketed only in Europe, having serial numbers 005761 and onward.


Part Name Reason for Change Details
Exterior Covers To enable recycling of the label (caution label, Materials used are either PC + PS
(01 to 06) operation label, etc.) affixed to the exterior cover or ABS + PVC.
without having to peel it off the cover, materials of
similar quality (having compatibility with each other)
are now used for the exterior cover and label.
Labels To enable recycling of the label (caution label, The material used is either PS or
(07 to 11) operation label, etc.) affixed to the exterior cover polyester film.
without having to peel it off the cover, materials of
similar quality (having compatibility with each other)
are now used for the exterior cover and label.




By newly incorporating the following electrical parts (12 to 18), the electric power consumption can be reduced to 2W
or less when the machine is OFF (plugged in). Parts (19 to 22) are the modified parts.




17
15 12


18
14
16
13




PCJ-242iA PRINTED IN JAPAN
S/B NO. : 1155-030A PAGE NO. : 2/3



The following modifications have also been made.

- The location to which the maker plate is affixed has been changed.



After
Modification




Before
Modification

- The identification labels shown below are separately dispatched, not shipped with the product (not affixed to the
product). Be sure to affix the identification labels (07, 09) of PS to the product that has undergone this modification.



Before Modification After Modification
Material Polyester film PS



07




09




BEFORE MODI. AFTER MODI. QTY
NO. F-IND PART NO. PART NO. F-IND PART NAME I SE/NO. AREA


01 01-12AA 1155-1051-02 1155-1051-13 01-12AB FRONT DOOR-LWR 1 1 Y 005691 0702

02 01-12CA 1155-1041-01 1155-1041-12 01-12CB FRONT DOOR-LWR 1 1 Y 005652 0400

03 02-01AA 1155-1056-02 1155-1056-13 02-01AB TOP COVER-RR 1 1 Y 005652 0000

04 02-17AA 1136-1030-01 1136-1030-02 02-17AB COVER 1 1 Y 005776 0000

05 02-26AA 1139-1015-01 1174-1015-01 02-26AB COVER 1 1 Y 0000

06 02-27AA 1155-1052-01 1155-1052-02 02-27AB RIGHT COVER-UPR 1 1 Y 005437 0000




PCJ-247iA PRINTED IN JAPAN
S/B NO. : 1155-030A PAGE NO. : 3/3



BEFORE MODI. AFTER MODI. QTY
NO. F-IND PART NO. PART NO. F-IND PART NAME I SE/NO. AREA


07 01-16BA 1155-7312-01 1155-7312-12 01-16BB LABEL TONER 1 1 Y ------ 2706

08 01-19AA 1161-7329-01 1161-7329-12 01-19AB LABEL TONERBOTTLE 1 1 Y 005127 0000

09 01-23BA 1155-7336-01 1155-7336-12 01-23BB LABEL WARNING 1 1 Y ------ 2000

10 01-24AA 1155-7320-01 1155-7320-12 01-24AB LABEL ADJUST 1 1 Y 005150 0000

11 32-08AA 1155-7332-01 1155-7332-12 32-08AB LABEL PUSH 1 1 Y 005117 0000

12 1134-0141-01 37-39AA PW BOARD-V 1 N 005861 2706

13 1134-0142-01 37-40AA PW BOARD-W 1 N 005861 2706

14 1155-2461-01 37-41AA BRACKET 1 N 005861 2706

15 9384-1900-57 37-42AA PWB SUPPORT 9.53H 4 N 005861 2706

16 9384-1900-56 37-43AA PWB SUPPORT 6.35H 4 N 005861 2706

17 1155-6864-01 37-44AA HARNESS 1 N 005861 2706

18 1155-6865-01 37-45AA HARNESS 1 N 005861 2706

19 36-50AA 1155-6840-03 1155-6840-15 36-50AB HARNESS 1 1 N 005861 0000

20 36-50BA 1155-6863-01 1155-6863-12 36-50BB HARNESS 1 1 N 005744 0000

21 37-15AA 1155-2415-02 1155-2415-03 37-15AB BRACKET 1 1 Y 005861 0000

22 37-20AA 1155-2417-02 1155-2417-13 37-20AB BRACKET 1 1 N 005733 0000




The following modification was implemented on/around November 1998 production.
The effective Se/No. was not confirmed.




PCJ-247iA PRINTED IN JAPAN