Text preview for : Confirming the firmware’s AVR-2807.PDF part of DENON Confirming the firmware’s AVR-2807 DENON AV Surround Receiver AV Surround Receiver Denon - AVR-2807 & 987 Confirming the firmware’s AVR-2807.PDF
Back to : Confirming the firmware’s | Home
Page 1 / 1
Confirming the firmware's number after upgraded
After completion of the updating operation, the new version number can be confirmed by
starting up the AVR-2807 according to the following procedure.
With the following operation, the AVR-2807 can be set to the Flash-ROM
Version-Number Confirmation Mode.
Turn the power of the AVR-2807 on, while holding both "STATUS" button and
"ROOM EQ" button on the front panel simultaneously.
Turn
STATUS ROOM EQ
Power ON
Every time the "STATUS" Button is pressed, version numbers of the MAIN, SUB,
etc. are indicated on the front panel section in the following order.
Depression Button Name Remarks
1 STATUS MODEL AVR
2 STATUS MAIN 00.63
3 STATUS SUB 00.32
4 STATUS DSP 27.04