Text preview for : PF-021.pdf part of Kyocera PF-021 Kyocera Printer _OPTIONS PF-100 PF-021.pdf
Back to : PF-021.pdf | Home
Service Bulletin
SB Number: SB PF-021 Creation Date: 16/11/2010
Subject: Paper jam detection due to the disengaged PI sensor
Model: PF-100
Phenomenon The paper jam at the optional paper cassette (PF-100) may be displayed and can not be cleared.
Cause The PI sensor for the paper conveying detection may disengage from the fixing hook in the
PF-100, due to the backlash from the PI sensor.
Solution The Sheet PI (303LF02120) has been added to the PI sensor.
PF-100 inside PI sensor Affixing position of the Sheet PI.
Top of the
Sensor PI
Fixing hook Sheet PI Rib
Affix the sheet within 1mm from the
edge.
Sheet PI sensor specifications
5mm
7mm
0.88mm
Parts
No. Old Parts New Parts Description Q'TY Interchangeability
No. No. Old New Old New
1 ----------- 303LF02120 SHEET PI - 1 - O
3LF02120
Classification Entire stock rework X In-field modification by case No modification necessary
In-field modification at next visit
Field measure When the above mentioned phenomenon occurs, please attach the Sheet PI to the PI sensor,
and check if the PI sensor is fixed properly after re-installing the PI sensor.
Serial numbers of affected units
Type Serial number
PF-100 WGB0X85813
The above mentioned change has been applied to machines produced after the above mentioned serial number.
KMIS Service Department, Kyocera Mita Europe Page 1 of 1 A350 / SB PF-021