Text preview for : NSM3-027.PDF part of NOKIA NSM3-027 NOKIA Mobile Phone Nokia_8210 NSM3-027.PDF



Back to : NSM3-027.PDF | Home

CONFIDENTIAL 1 (2)




Nokia Mobile Phones Service Bulletin No. SB-027/12.06.00
Technical Support, Europe & Africa

NSM-3


NEW SERVICE SOFTWARE VERSION 3.11

New service software version 3.11 has been released for NSK-1/3, NSE-1/3/6,
NSM-1/2/3 and NSB-1/3/6/7 products.

Note: You cannot use DLL version 3.11 before WinTesla version 6.10 or
later with dongle drivers is installed.

This release of the WinTesla DLL is Y2K compliant.

Changes made from version 3.01 to version 3.11:

- Faultlog scanning speeded up
- Support for NSB-6 and NSB-7 added
- 6 digit dongle serial number support
- Fixed band change problem during phone change
- Menu Product/Initialise:
- "Communication" selection can be used to set phone back to test mode
without resetting phone
- Menu Tuning/TX Power:
- More accurate TX Power tuning values
- Menu Tuning/AM-Suppression:
- RSSI value format changed
- Menu Tuning/RX Calibration:
- Finnish 'Nro' (NSM-2, NSM-3 and NSB-6) removed
- Menu Tuning/TX I/Q:
- Amplitude or Phase Difference cannot be tuned out of range
- DSP init after TX I/Q tuning added
- Menu Testing:
- Sleep Mode Test added
- Call Simulation removed
- Noise Sensitivity removed from NSM-2, NSM-3, NSB-6 and NSB-7
- Menu Testing/User Interface:
- Two display tests added for NSM-2, NSM-3, NSB-6 and NSB-7
- Menu Testing/Audio/Internal:
- Buzzer level maximum to 127
- Menu Testing/ADC Readings:
- Hourglass shown during data reading
- Menu Software/Phone Identity:
- More informative error messages
- Some validity checks added
- File name is generated from IMEI when data is saved
- "Add SIM" and "Clear SIM" buttons added dialog to allow manual
entering of multi-index SIM-lock data



NSM-3 SB-027
CONFIDENTIAL 2 (2)




- Menu Software/Production Data Edit:
- Product code and HW version editing is disabled for NSB-1 and NSB-3
- HW version edit for NSB-6 and NSB-7 phones disabled when using
PKD-1
- Product Code and Basic Product Code checks improved
- Menu Dealer/Restore User Defaults:
- Market area is not shown, if corresponding Voice Mail Box or VAS file is
not present
- Menu Dealer/User Settings:
- Wakeup text and Wakeup graphic editing is disabled for NSB-6 and
NSB-7
- Error message shown, if security code check fails


CODE DESCRIPTION
0774080 SERVICE SW NSE/K/B-1/3, NSM-1/2/3, NSE-6 3.5'' DISK




NSM-3 SB-027