Text preview for : M39h Seats.pdf part of Daewoo Matiz Service Manual, Wiring Diagram - 16 Part File - 62 File
Back to : 796cc (My 2003).part01.ra | Home
SECTION 9H
SEATS
CAUTION: Disconnect the negative battery cable before removing or installing any electrical unit or when a tool or equipment could easily come in contact with exposed electrical terminals. Disconnecting this cable will help prevent personal injury and damage to the vehicle. The ignition must also be in B unless otherwise noted.
TABLE OF CONTENTS
Description and Operation . . . . . . . . . . . . . . . . . . Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Component Locator . . . . . . . . . . . . . . . . . . . . . . . . Front Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rear Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Repair Instructions . . . . . . . . . . . . . . . . . . . . . . . . . On-Vehicle Service . . . . . . . . . . . . . . . . . . . . . . . . . . Front Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9H-2 9H-2 9H-3 9H-3 9H-4 9H-5 9H-5 9H-5 Front Seat Cushion . . . . . . . . . . . . . . . . . . . . . . . . 9H-7 Front Seats Guide Rail . . . . . . . . . . . . . . . . . . . . 9H-9 Front Seat Cushion Frame . . . . . . . . . . . . . . . . . . 9H-9 Rear Seatback . . . . . . . . . . . . . . . . . . . . . . . . . . . 9H-10 Rear Seat Cushion . . . . . . . . . . . . . . . . . . . . . . . Rear Seatback Latch . . . . . . . . . . . . . . . . . . . . . Rear Seatback Hinge . . . . . . . . . . . . . . . . . . . . . Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9H-11 9H-11 9H-12 9H-13
Head Restraint . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9H-5 Front Seatback . . . . . . . . . . . . . . . . . . . . . . . . . . . 9H-6
Fastener Tightening Specifications . . . . . . . . . . 9H-13
DAEWOO M-150 BL2
9H 2 SEATS
DESCRIPTION AND OPERATION
SEATS
Important: Do not attempt to change the designed seat position by altering the designed seat adjuster-to-floor pan anchor provisions or the seat adjuster-to-seat frame anchor provisions. Changing the seat position could affect the performance of the seat system. This vehicle is equipped with low-backed front seats with separate head restraints and a three-passenger folding rear seat. Split folding rear seat is optional. Seats cushions and seatbacks have formed foam pads, which fit the contours of the fullpanel seatback frame assembly and the designed contour of the seat cushion frame. There are no front seat forward or rearward relocation provisions provided at either the seat adjustertoseat frame or the seat adjustertofloor pan anchor attachments.
DAEWOO M-150 BL2
SEATS 9H 3
COMPONENT LOCATOR
FRONT SEAT
D109B402
1. 2. 3. 4. 5.
Head Restraint Guide Sleeve Seatback Seatback Frame Seat Cushion
6. 7. 8. 9. 10.
Seat Cushion Frame Recliner Recliner Knob Seat Side Cover Guide Rail
DAEWOO M-150 BL2
9H 4 SEATS
REAR SEAT
D19B403A
1. 2. 3. 4. 5.
Rear Seatback Cushion Rear Seatback Frame Rear Seat Hinge Rear Seat Lock Rear Seat Cushion
6. 7. 8. 9.
Seat Release Knob Eyelet Seat Back Hinge Rear Cushion Pull Loop
DAEWOO M-150 BL2
SEATS 9H 5
REPAIR INSTRUCTIONS ONVEHICLE SERVICE
FRONT SEATS
Removal Procedure
1. Disconnect the negative battery cable. 2. Remove the front seat. D Remove the bolts (1). D Disconnect the seat belt warning lamp connector (2). D Remove the seat (3).
D109B528
Installation Procedure
1. Connect the seat belt warning lamp connector. 2. Install the front seat with the bolts.
Tighten
Tighten the seat bolt to 2328 NSm (1721 lb-ft). a. Seat bolt. 3. Connect the negative battery cable. 2328 NSm
D19B529A
HEAD RESTRAINT
Removal Procedure
1. Pull the head restraint up to the stop position. 2. Insert a small flathead screwdriver in the notch in the left guide sleeve and pull up the head restraint by pushing the head restraint left.
D109B530
DAEWOO M-150 BL2
9H 6 SEATS Installation Procedure
1. Install the head restraint into the guide sleeves. Press down in order to engage the stop pin.
D109B531
FRONT SEATBACK
Removal Procedure
1. Disconnect the negative battery. 2. Remove the front seat assembly. Refer to "Front Seats" in this section. 3. Remove the recliner knob from the front seat. D Remove the screw (1). D Remove the recliner knob (2).
D109B532
4. Remove the recliner cover from the front seat. D Remove the screws (1). D Remove the recliner cover (2).
D109B533
5. Remove the recliner from the front seat. D Remove the bolts on the seat cushion (1). D Remove the seatback cover hog rings. D Remove the seatback cover (2). D Remove the bolts on the seatback (3).
D109B534
DAEWOO M-150 BL2
SEATS 9H 7
6. Remove the seatback bolt from the seat cushion (1). 7. Remove the seatback assembly (2).
2
1
D109B535
Installation Procedure
1. Install the seatback assembly with the bolt. 2. Install the recliner with the bolts 3. Install the seatback cover with the hog rings.
D109B536
4. Install the recliner knob and the cover with the screws. 5. Install the front seat assembly. Refer to "Front Seat" in this section. 6. Connect the negative battery cable.
D109B537
FRONT SEAT CUSHION
Removal Procedure
1. Disconnect the negative battery cable. 2. Remove the front seat assembly. Refer to "Front Seat" in this section. 3. Remove the seat belt buckle. Refer to Section 8A, Seat Belts. 4. Remove the recliner knob. D Remove the screw (1). D Remove the recliner knob (2).
D109B532
DAEWOO M-150 BL2
9H 8 SEATS
5. Remove the recliner cover. D Remove the screws (1). D Remove the recliner cover (2).
D109B533
6. Remove the seat cushion. D Remove the recliner bolts on the seat cushion (1). D Remove the seatback bolt (2). D Remove the seat cushion (3).
D109B538
Installation Procedure
1. Install the seat cushion with the seatback bolt and the recliner bolts.
D109B536
2. Install the recliner cover and the recliner knob with the screws. 3. Install the seat belt buckle. Refer to Section 8A, Seat Belts. 4. Install the front seat assembly. Refer to "Front Seats" in this section. 5. Connect the negative battery cable.
D109B537
DAEWOO M-150 BL2
SEATS 9H 9
FRONT SEATS GUIDE RAIL
Removal Procedure
1. Disconnect the negative battery cable. 2. Remove the front seat assembly. Refer to "Front Seats" in this section. 3. Remove the guide rail from the seat. D Remove the bolts (1). D Remove the guide rail (2).
D109B539
Installation Procedure
1. Install the guide rail to the seat with the bolts. 2. Install the front seat assembly. Refer to "Front Seat" in this section. 3. Connect the negative battery cable.
D109B540
FRONT SEAT CUSHION FRAME
Removal Procedure
1. Disconnect the negative battery cable. 2. Remove the front seat cushion. Refer to "Front Seat Cushion" in this section. 3. Remove the guide rail. D Remove the bolts (1). D Remove the guide rail (2).
D109B539
4. Remove the seat cushion cover. D Remove the hog rings. 5. Remove the seat cushion frame.
D109B541
DAEWOO M-150 BL2
9H 10 SEATS Installation Procedure
1. Install the seat cushion cover with the hog rings.
D109B541
2. Install the guide rail with the bolts. 3. Install the front seat cushion. Refer to "Front Seat Cushion" in this section. 4. Connect the negative battery cable.
D109B540
REAR SEATBACK
Removal Procedure
1. Remove the rear seatback. D Remove the rear seatback lock by pulling the lock knob upward (1). D Remove the seatback hinge bolts (2). D Remove the rear seatback (3).
D109B542
Installation Procedure
1. Install the rear seatback with the hinge bolts. 2328 NSm
Tighten
Tighten the hinge bolts to 2328 N.m (1721 lb-ft). a. Rear seatback hinge bolt. 2. Press the lock knob.
D19B543A
DAEWOO M-150 BL2
SEATS 9H 11
REAR SEAT CUSHION
Removal Procedure
1. Remove the rear seat cushion. D Remove the bolts (1). D Lift and remove the rear seat cushion (2).
D109B544
Installation Procedure
1. Install the rear seat cushion with the bolts.
Tighten
Tighten the rear seat cushion bolt to 2328 N.m (1721 lbft). a. Rear seat cushion bolt.
23 28 NSm
D19B546A
REAR SEATBACK LATCH
Removal Procedure
1. Remove the rear seatback assembly. Refer to "Rear Seatback" in this section. 2. Remove the lock knob from the seatback. D Remove the lock knob by twisting it (1).
D109B718
3. Remove the rear seatback cover from the seatback frame. 4. Remove the lock from the seatback frame. D Remove the bolts (1). D Remove the lock (2).
D109B719
DAEWOO M-150 BL2
9H 12 SEATS Installation Procedure
1. Install the lock to the seatback frame with the bolts. 2. Install the rear seatback cover to the seatback frame.
D109B720
3. Install the lock knob to the seatback. 4. Install the rear seatback assembly. Refer to "Rear Seatback" in this section.
D109B718
REAR SEATBACK HINGE
Removal Procedure
1. Remove the rear seatback assembly. Refer to "Rear Seatback" in this section. 2. Remove the hinge from the seatback. D Remove the nut. D Remove the hinge.
D109B721
Installation Procedure
1. Install the hinge to the seatback with the nut. 2. Install the rear seatback assembly. Refer to "Rear Seatback" in this section.
D109B722
DAEWOO M-150 BL2
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ Á Á Á ÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁ Á Á Á Á Á Á ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ Á Á ÁÁÁÁÁÁÁ Á Á Á ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ Á Á Á Á ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ Á Á Á
Rear Seatback Bolts Rear Seat Cushion Bolts Front Seat Bolts (Both) Application
DAEWOO M-150 BL2
FASTENER TIGHTENING SPECIFICATIONS
SPECIFICATIONS
23 28 23 28 23 28 NSm
17 21 17 21 17 21 Lb-Ft
SEATS 9H 13
Lb-In