Text preview for : M39m Exterior Trim.pdf part of Daewoo Matiz Service Manual, Wiring Diagram - 16 Part File - 62 File



Back to : 796cc (My 2003).part01.ra | Home

SECTION 9M

EXTERIOR TRIM
TABLE OF CONTENTS
Description and Operation . . . . . . . . . . . . . . . . . . 9M-2 Emblems and Lettering . . . . . . . . . . . . . . . . . . . . . 9M-2 Mud Guards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9M-2 Repair Instructions . . . . . . . . . . . . . . . . . . . . . . . . . 9M-3 On-Vehicle Service . . . . . . . . . . . . . . . . . . . . . . . . . . 9M-3 Roof Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9M-3 Rear Spoiler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9M-3 Front Bumper Spacer . . . . . . . . . . . . . . . . . . . . . . 9M-4 Tailgate Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . 9M-5

DAEWOO M-150 BL2

9M ­ 2 EXTERIOR TRIM

DESCRIPTION AND OPERATION
EMBLEMS AND LETTERING
The emblems and lettering on the vehicle are attached by adhesive. The company emblem appears on the hood. The lettering, which appears in several places on the body of the vehicle, features the model, the grade, and the company name.

MUD GUARDS
Front and rear mud guards are optional equipment on all models. Mud guards will help prevent an excessive buildup of mud on the body.

DAEWOO M-150 BL2

EXTERIOR TRIM 9M ­ 3

REPAIR INSTRUCTIONS ON­VEHICLE SERVICE
ROOF MOLDING
Removal Procedure
1. Remove the roof molding from the plastic clips (1).

D109E586

Installation Procedure
1. Press the roof molding onto the plastic clips.

D109E587

REAR SPOILER
Removal Procedure
1. Open the tailgate. 2. Remove the spoiler seals.

D19E588A

DAEWOO M-150 BL2

9M ­ 4 EXTERIOR TRIM
3. Remove the rear spoiler from the tailgate. D Remove the nuts (1). D Remove the rear spoiler (2).

D19E589A

Installation Procedure
1. Install the rear spoiler on the tailgate with the nuts. 2. Install the spoiler seals.

D19E590A

FRONT BUMPER SPACER
Removal Procedure
1. Support the hood suitably. 2. Disconnect the negative battery cable. 3. Remove the front bumper spacer. D Remove the bolts (1). D Remove the front bumper spacer from the bumper fascia (2). 4. Remove the turn signal lamps. Refer to Section 9B, Lighting Systems.
D209B109

Installation Procedure
1. Install the turn signal lamps. Refer to Section 9B, Lighting Systems. 2. Install the front bumper spacer with the bolts. 3. Connect the negative battery cable.

D209B110

DAEWOO M-150 BL2

EXTERIOR TRIM 9M ­ 5

TAILGATE HANDLE
Removal Procedure
1. Disconnect the negative battery cable. 2. Open the tailgate. 3. Remove the tailgate lock cylinder. Refer to Section 9P, Doors. 4. Remove the license plate lamps. Refer to Section 9B, Lighting Systems. 5. Remove the tailgate handle. D Remove the screws (1). D Remove the tailgate handle (2).

D209B111

Installation Procedure
1. Install the tailgate handle with the screws. 2. Install the license plate lamps. Refer to Section 9B, Lighting Systems. 3. Remove the tailgate lock cylinder. Refer to Section 9P, Doors. 4. Connect the negative battery cable.

D209B112

DAEWOO M-150 BL2