Text preview for : ACCESS.PDF part of Hasselblad PME45, APO1.4, CW, 2XE, SWC Service Manual Meter Prism, Proshade, Adapter, Converter, Extension, D-Flash, Winder, Body, Zoom, Teleconverter - (4.087Kb) 2 Part File - pag. 131
Back to : accessories_III_.part1.ra | Home
Service Manual Accessories III
May 1993
Victor Hasselblad AB
Göteborg Sweden
Copyright © 1998 by Victor Hasselblad AB. All rights reserved. No parts of this material may be reproduced, stored in retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopy, recording, or otherwise, without the prior written permission of the Company.
Contents list Accessories III
1.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23.
Revision 1
Meter prism viewfinder PME5 Prism viewfinder PM5 Proshade 6093 Focusing screen adapter SWC Tripod quick-coupling Meter prism viewfinder PME51 Prism viewfinder PM90 Converter 2XE Extension tube 16E, 32E, 56E Standard focusing hood Focucing hood E Proshade 6093-T FlexBody Reflex viewfinder RMfx Magnifying hood HM2 Tripod quick-coupling S Teleconverter 1.4XE Meter prism viewfinder PME90 Winder CW D-Flash 40 Snap-lock flash grip ArcBody Focusing screen adapter, standard
April 1998
Contents list Accessories III
2.
24. 25. 26. 27. 28. 29. 30. 31.
Teleconverter APO1.4XE Zoom lens FE 4.8/60 - 120 mm View magnifier Winder F Extension tube 16, 32, 56 TCC Prism viewfinder PM45 Meter prism viewfinder PME45 View magnifier PM45/PME45
Revision 4
January 2001
Related Service Infos Accessories 15/93 18/93 19/93 21/95 06/96 07/96 13/96 15/96 16/96 02/97 03/97 08/97 09/97 13/97 18/97 21/97 22/97 23/97 30/97 32/97 02/98 04/98 05/98
Revision 0
1.
Meter prism viewfinder PME90 Meter prism viewfinder PME, PME3 and PME5 Meter prism viewfinder PME51 Proshade 6093-T Prism viewfinder PM5 and PME51 FlexBody D-Flash 40 Winder CW Meter prism viewfinder PME90 IR Remote control and Winder CW Winder CW Prism viewfinder PM5 and PME51 Prism viewfinder PM5 and PME51 Winder CW Winder CW FlexBody FlexBody focusing screen Tripod quick-coupling S ArcBody Winder CW D-Flash 40 IR Remote control Snap lock flash grip
October 1998
Related Service Infos Accessories 06/98 10/98 11/98 11/99 12/99 01/00 03/00 04/00 06/00 07/00 09/00 12/00 04/01 2.
FlexBody ArcBody and Grandagon lenses Teleconverter APO 1.4XE Zoom lens FE 4.8/60 - 120 mm View magnifier New CD-ROM - Version 1.2 Prism viewfinder PM90 Prism viewfinder PM45 Meter prism viewfinder PME45 Meter prism viewfinder PME45 and VHABSTS New CD-ROM - Version 1.3 Winder CW New CD-ROM - Version 2.0
Revision 4
January 2001
Meter prism viewfinder PME5
Code No. 42295 Construction No. 414 003
44 43 42 41 40 45
5 PME
1
PME5.EPS Link to: VHABSTS
930326
39 30 37 32 31
M A A S X A
38
35 33 34 24
B A T
36
RED BLACK ORANGE BLUE YELLOW
29
23
22
19 28 26 27 15 14 13 12
V6
25
21
20
16 19 17 11 18
1 2
10 9
8 7 3
4 6 5
COPYRIGHT © 1993 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
Revision 1
February 2000
Meter prism viewfinder PME5
Pos Pcs No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 1 1 2 4 1 2 1 1 1 2 1 1 1 1 1 1 2 1 2 1 1 1 1 1 1 1 1 1 1 5 1 1 1 1 1 1 2 1 1 1 1 3 1 1 1 Spare Part No. 414 500 414 497 823 679 826 009 823 685 414 360 414 361 414 362 825 862 414 431 414 417 -01 414 407 13 455 414 325 414 104 810 524 810 540 820 650 414 044 414 366 414 022 414 491 414 413 414 106 814 523 414 102 414 454 820 630 414 401 414 322 414 410 414 403 414 499 414 411 820 670 414 424 414 434 414 108 824 604 405 412 414 421 414 420 Description Insulation plate Light shield Screw Screw Cover Screw Engraved frame Shim Frame Screw Shim Battery sign Cover Disc Prism Display prism Spacer Washer Screw Display board Photo cell holder Metering unit, compl. Light shield Button Indicator, compl. Spring Battery lid Cable Battery Screw Ring Shell Window Plate Diffusor Window Screw Ocular Rubber eyepiece Plate spring Shoe Screw Insulating plate Leather Leather Remark
1
Sales code No. 52191 Please state serial No.
6 volt, type PX28
Sales code No. 42412
Revision 1
February 2000
Prism viewfinder PM5
COPYRIGHT © 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
2
PM501.EPS
970213
30
29 28 27 26
31
25
24 23 12 20 21 = Loctite 480 22 19 12 21
18 14 13 12 16 17
15
33
11 10 9 8
7 6 1
2 32 5 4 3
Revision 1
February 1997
Prism viewfinder PM5
Pos Pcs No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 2 1 1 4 2 1 1 1 2 1 1 7 1 1 1 1 1 1 1 1 2 1 2 1 1 1 1 3 1 1 1 Spare Part No. 826 007 414 566 826 009 823 685 414 360 414 361 414 362 825 862 414 431 414 350 830 440 414 345 414 342 414 368 414 325 414 491 414 366 414 404 414 330 414 472 414 403 830 460 414 424 414 434 406 110 829 660 405 412 414 421 414 471 Description Screw Name plate Cover Screw Screw Engraved frame Shim Prism frame Screw Shim Cover Screw Bracket Prism cover Support Prism Light shield Holder Bracket Shell Cover Plate Screw Ocular Rubber eyepiece Plate spring Shoe Screw Insulating plate Leather Leather Remark
2
Sales code No. 52191 Please state serial No.
Sales code No. 42412
Serial No. 401EU1001 - forwards
32 33 1 1 414 387 414 800 Engraved frame Prism frame Please state serial No.
Revision 2
May 2000
Proshade 6093
Code No. 40738 Construction No. 415 334
7
PROSHADE.EPS
930324
3
8 8 9 10 8 4 14 2
15 11 12 16
6
13 5 17
4
18
3
19 2
1
COPYRIGHT © 1993 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
Revision 0
May 1993
Proshade 6093
Pos Pcs No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 1 4 1 2 1 1 1 5 1 1 1 1 1 2 1 1 1 1 1 Spare Part No. 415 371 415 419 415 370 415 446 415 335 415 336 415 444 826 010 415 445 415 384 415 410 415 440 415 447 415 408 415 385 815 857 415 369 415 386 415 454 Description Front frame Screw Bellows Joint Rear frame Interm. frame Catch Screw Link coupling Locking arm Spring Brake Lifter Plate Locking shaft Spring Rail Rail, compl. Tape Remark
3
Revision 0
May 1993
Focusing screen adapter SWC
Code No. 41050 Construction No. 402 348
Mattskiveadapter SWC.EPS
930219
4
5
4
3
Matt surface 6
2 1 7 9 8
Smooth surface
10
11 1 12
COPYRIGHT © 1993 ANDERS ENGSTRÖM
Revision 0
May 1993
ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
Focusing screen adapter SWC
Pos Pcs No. 1 2 3 4 5 6 7 8 9 10 11 12 3 1 1 1 1 1 4 2 1 2 1 1 Spare Part No. 830 440 402 476 402 324 402 475 815 808 413 321 402 477 402 480 413 421 402 478 402 302 402 325 Description Screw Holder Frame Locking arm Spring Focusing screen Spacer Spacer Fresnel lens Spring Rear plate Locking arm Remark
4
Revision 0
May 1993
Tripod quick-coupling
Code No. 45130 Construction No. 406 002
SNABBKPL.EPS
930518
5
1
2 14 4 3 13 12
5 11
6 7 10
8
9
1
COPYRIGHT © 1993 ANDERS ENGSTRÖM
Revision 0
ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
May 1993
Tripod quick-coupling
Pos Pcs No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 6 1 1 1 1 1 1 1 1 1 1 1 1 1 Spare Part No. 829 640 406 402 817 115 406 344 406 301 406 410 406 409 406 406 406 405 406 408 406 407 815 803 406 342 406 404 Description Screw Plate Clip Handle Base Spring Spring Guide Plate Spring Plate Spring Pawl Pin Remark
5
Revision 0
May 1993
COPYRIGHT © 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
Meter prism viewfinder PME51
39 38 37 36 35 40
PME5101.EPS
970213 Link to: VHABSTS
6
34 18 2 29
M A A S X A
33
31 30 22
BLACK RED BLUE ORANGE YELLOW
32
28 27
RED GREEN
20 21
18 26
23
24 25 15 14 = Loctite 480 42 13
V6
16 18
19 1
12
11
17
10 9
8 7 2
41
6 4 5
3
Revision 2
January 2001
Meter prism viewfinder PME51
Pos Pcs No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 1 4 1 1 4 2 1 1 1 2 1 1 1 1 1 1 1 7 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1 Spare Part No. 414 497 830 460 414 567 826 009 823 685 414 360 414 361 414 362 825 862 414 431 414 417 414 407 13 455 414 325 414 104 810 540 830 440 810 524 414 022 414 491 414 413 414 106 814 523 414 102 414 454 414 401 414 322 414 410 414 403 414 472 414 424 414 429 414 434 406 110 829 660 405 412 414 421 414 420 Description Light shield Screw Name plate Cover Screw Screw Engraved frame Shim Prism frame Screw Shim Battery sign Cover Disc Prism Display prism Washer Screw Spacer Metering unit, compl. Light shield Button Indicator, compl. Spring Battery lid Cable Battery Ring Shell Window Plate Cover Ocular Rubber eyepiece Rubber ring Plate spring Shoe Screw Insulating plate Leather Leather Remark
6
Sales code No. 52191 Please state serial No.
6 volt, type PX28
Sales code No. 42412 Standard Optional
Serial No. 402EU1001 - forwards
41 42 1 1 414 387 414 800 Engraved frame Prism frame Please state serial No.
Revision 2
May 2000
Meter prism viewfinder PME51 Calibration
Use the following equipment for calibration work: Light box Test shell 901654 Camera body (500 or 2000) Planar lens 2.8/80 Focusing screen Acute Matte (Hasselblad Service Test System)
6:1
NOTE! Using a 203FE/205FCC/TCC camera body will give an error of approx. 0.1 EV due to the partially transparent mirror and is therefore normally not recommended. CAUTION! When handling the circuit board a grounded bench mat and a wrist strap must be used to prevent ESD damage. RV22 RV20
RV6
NOTE! Potentiometer RV20 and RV22 are pre-adjusted and sealed. They must not be touched.
Setup for calibration: PME51 ISO/ASA Max f Aperture Focus EV K-factor LL 100 2.8 2.8
Planar 2.8/80
¥
Light box*
12 1.04 9
See page 6:2
Light box**
Attach the test shell 901654 and install a battery. Fit the finder to the camera body. Connect the camera body to the light box. Adjust the potentiometer RV6 so that LED 11 is lighting up and LED 12 is twinkling (0.25 EV accuracy). * Light box type "Kyoritsu" with fixed light levels in EV. ** Light box type "Spectron" with infinitely variable light levels in LL.
Revision 1
February 2000
Meter prism viewfinder PME51 Calibration
6:2
Hasselblad Service Test System & Kyoritsu Light box
In the present version of the Service Test System (Ver. 1.5/1.6) the message "Set light source to K=1.3" is displayed in the PME mode when using a Kyoritsu light box. This to get suitable light levels equivalent to 1/2stops when calibrating the PME, PME3 and PME5. For the PME51 a light level equivalent to a 1/4 or 3/4 stop must be used. Therefore measure the light box EV 12 setting with the test system. During the measurement try different K-factors until an acceptable 1/4 or 3/4 level is reached. (Either one can later on be used for calibration).
PME51 calibration should then be made according to the instruction, Calibration 6:1
Revision 0
September 1993
Prism viewfinder PM90
COPYRIGHT ' 1999 ANDERS ENGSTR M ANDERS ENGSTR M, ILLUSTRAT R stra v gen 46 430 91 H N TEL/FAX 031- 96 84 64 [email protected]
7
1 2 3 4
PM90/01.EPS SVART 991221
5
6
7 9 10 8 Double-sided tape
Serial No. 411EE1700 - fwd Prism protection
11 Protective foil
12 13
14 15 16 21 20 19 22 18
17
23
Revision 1
February 2000
Prism viewfinder PM90
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 1 1 2 1 1
7
Description
Plate Screw Shoe Plate spring Leather Shell Pad Plate Holder Prism protection Prism Prism Protective foil Spring Frame Ocular Rubber ring Rubber eyepiece Screw Name plate Magazine catch Screw Engraved frame Cover Please state serial No. Sales code No. 52191 Serial No. 411EE1700 - fwd Serial No. 411EE1700 - fwd
Spare Part No.
405 412 829 660 406 110 414 434 414 550 414 492 414 576 414 403 414 383 414 553 414 331 414 332 415 468 816 931 414 493 414 561 414 429 414 424 826 022 414 560 414 385 826 014 414 387
Remark
Revision 3
January 2001
Converter 2XE
Sales code No. 20605 Construction No. 435 007
8
CONV2XE.EPS Converter 2XE SVART 940421
1
2
14
3 1 16
15 5 4 6
14
13
12 7 Reflection protector "Palpas" 8 11 9 10
COPYRIGHT © 1994 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 TEL/FAX 031- 96 84 64
430 0 Revision 91 HÖNÖ
April 1994
Converter 2XE
Pos Pcs No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 3 1 2 1 1 1 1 4 4 1 1 1 1 6 1 1 Spare Part No. 826 002 435 342 829 325 435 110 435 041 816 304 435 353 815 513 435 402 435 111 435 404 435 109 403 346 812 311 816 929 435 341 Description Screw Cover Screw Holder Locking mechanism Spring Holder Spring Contact pin Holder Roller Key Spring Pin Spring Catch Optics Housing Remark
8
Incl. 816 304
Alternatively 812 313/314
Not available as spare part Not available as spare part
Revision 1
August 1995
Extension tube 16E, 32E, 56E
Sales code No. 40654, 40655, 40656 Construction No. 435 004, 435 005, 435 006
9
EXTNSN56.EPS Mellanringar 16, 32, 56 950813
1
2 3
14
1 16
15 5 4 6
14
13 12
7 Reflection protector "Palpas" 8 9 10 17 19 20 11
18
21
Extension tube 32E
Extension tube 16E
COPYRIGHT © 1995 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031- 96 84 64
Revision 0
August 1995
Extension tube 16E, 32E, 56E
Pos Pcs No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 3 1 2 1 1 1 1 4 4 1 1 1 1 6 1 1 1 1 4 1 1 Spare Part No. 826 002 435 342 829 325 435 108 435 041 816 304 435 353 815 513 435 402 435 106 435 404 435 104 403 346 812 311 816 929 435 341 435 107 435 103 435 403 435 105 435 101 Description Screw Cover Screw Holder Locking mechanism Spring Holder Spring Contact pin Holder Roller Key Spring Pin Spring Catch Holder Key Contact pin Holder Key Remark
9
56E Incl. 816 304 32E, 56E
56E Alternatively 812 313/314 32E 32E 16E 16E 16E
Revision 0
August 1995
Focusing hood
Sales code No. 42315, 42323 Construction No. 416 001, 416 002
30 11
10
FOCHOOD.EPS Focusing hood standard
950616
31 28 27 18 1 2 3 4 7 5 26 25
29
24 23
8 9 10 11 20 12 13 14 6 21
22
19
18
17 16 15
COPYRIGHT © 1995 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
Revision 1
August 1995
Focusing hood
Pos Pcs No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1 2 2 1 1 1 1 1 4 1 3 2 1 2 1 1 1 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Spare Part No. 416 043 416 415 416 414 416 403 416 404 416 402 416 401 416 342 416 416 416 408 816 925 815 612 416 407 816 924 416 419 416 427 416 111 416 413 836 001 416 040 416 041 416 348 416 425 416 426 416 346 416 417 416 347 814 507 416 345 416 112 416 423 Description Plate assembly Axle Axle Side plate, left Side plate, right Side plate, right Side plate, left Rear plate Axle Hinge, upper Spring Spring Hinge, lower Spring Axle Light seal Frame Axle Pin Lid Lid Lock Leather Leather Grip Plate Lock Spring Catch Bracket Axle Magnifier, 0 Neutral Remark
10
Front Front Rear Rear
Chrome Black
Sales Code No. 42331
Revision 1
August 1995
Focusing hood E
Sales code No. 42317, 42325 Construction No. 416 003, 416 004
11
FOCHOODE.EPS Focusing hood E
950616
29 11
30 27 26 18 1
28
2
24
23 22
3 4 7 5
25
21 8 9 10 11 19 12 13 14 6 20
18
17 16 15
COPYRIGHT © 1995 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
Revision 0
August 1995
Focusing hood E
Pos Pcs No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 1 2 2 1 1 1 1 1 4 1 3 2 1 2 1 2 1 4 1 1 1 1 1 1 1 1 1 1 1 1 1 Spare Part No. 416 044 416 415 416 414 416 403 416 404 416 402 416 354 416 342 416 416 416 408 816 925 815 612 416 407 816 924 416 419 416 428 416 460 416 413 416 045 416 046 416 348 416 425 416 426 416 346 416 417 416 347 814 507 416 345 416 112 416 423 Description Plate assembly Axle Axle Side plate, left Side plate, right Side plate, right Side plate, left Rear plate Axle Hinge, upper Spring Spring Hinge, lower Spring Axle Light seal Frame Axle Lid Lid Lock Leather Leather Grip Plate Lock Spring Catch Bracket Axle Magnifier, -1 Diopters Remark
11
Front Front Rear Rear
Chrome Black
Sales Code No. 42374
Revision 0
August 1995
Proshade 6093-T
Code No. 40739 Construction No. 415 390
12
PRSHADE1.EPS
950904
7
8 8 10 15 8 4 2
9
6 11
16 17
18 12 13 5 14
4
20
3
19
21 2
1
COPYRIGHT © 1993 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
Revision 0
September 1995
Proshade 6093-T
Pos Pcs No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 1 4 1 2 1 1 1 5 1 1 2 2 1 1 2 1 1 1 1 1 1 Spare Part No. 415 371 415 419 415 370 415 446 415 335 415 336 415 444 826 010 415 445 415 384 815 708 415 413 415 440 415 447 415 408 415 385 815 857 415 457 415 458 415 391 415 454 Description Front frame Screw Bellows Joint Rear frame Interm. frame Catch Screw Link coupling Locking arm Spring Pin Brake Lifter Plate Locking shaft Spring Rack, long Rack, short Rail, compl. Tape Remark
12
Revision 0
September 1995
FlexBody
13:1
FLXBDY01.EPS
970528
COPYRIGHT © 1997 ANDERS ENGSTRÖM
ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
47 1 2 3 46 45 44 49 43 42
48 41 7 8 11 9 10 38 12 13 7 37 32 7 14 16 17 35 18 19 25 24 23 22 21 20 34 17 32 31 33 15 36 17 40
4
5
6
39
30
1 2 28 26 29
27
Revision 1
August 1997
FlexBody
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 2 2 2 1 1 2 3 1 1 2 1 1 1 2 1 1 4 1 1 1 1 2 1 1 1 1 6 1 2 1 1 2 1 1 4 1 2 1 1 1 1 3 1 2 1 2 1 1 1
13:1
Spare Part No.
13 379 109 101 821 820 12 166 109 354 825 960 810 919 109 422 109 360 821 663 812 503 109 367 109 341 824 963 825 764 13 190 -1 825 733 109 352 109 330 109 353 810 958 824 964 109 355 109 349 825 704 30 763 829 790 109 022 821 911 109 356 109 366 840 906 109 419 109 362 823 451 109 364 109 405 109 347 812 903 109 415 109 453 825 732 840 905 812 705 109 361 109 363 109 365 109 346 13 456
Description
Remark
Leather Knob, complete Screw Leather Knob Screw Spring washer Bearing Support, outer Screw Pin Guide Intermediate part Screw Stop screw Name plate Screw Rod Slider Nut Spring washer Screw Pin Foot Screw Tripod foot Screw Foot, complete Screw Attachment Plate, right Bearing Locking ring Plate, left Screw Gear ring Shim (0,05mm) Adjusting screw Pin Shrink sleeve Leather Screw Bearing Pin Support, inner Slide bar Gear Adjusting screw, complete Level Below Serial No. 451EU1308 " Alternatively 109 409 (0,10mm)
Revision 1
August 1997
FlexBody
13:2
COPYRIGHT © 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
FLXBDY02.EPS
970514
30 27
1 24 23 2 25
26
28 29
22 21 20 19 15 16 17 18 14 13 12
3
11
5
10
4
6 7 9 8
Revision 1
August 1997
FlexBody
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 1 1 2 1 1 1 1 2 4 1 1 2 2 2 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1
13:2
Spare Part No.
109 357 109 301 109 421 22 807 109 322 825 733 109 401 812 311 821 661 109 359 109 402 308 447 812 202 820 430 830 060 810 736 109 414 109 413 109 403 109 424 109 342 815 754 811 201 823 015 109 343 13 826 30 484 -1 13 810 -1 812 207 109 025 109 024
Description
Remark
Frame Bellows Tape Stray light mask Rear plate Screw Support plate Pin Screw Guide pin Magazine hook Screw Pin Screw Screw Washer Latch Locking washer Gear Spring Housing Spring Pin Screw Driving shaft Spring Crank support Handle Pin Crank mechanism, complete Rear plate, complete
Please state serial No.
Please state serial No.
Revision 1
August 1997
FlexBody
20 19 18 16 15
13:3
FLXBDY03.EPS
960610
1
17
14
8
9 11 10 12 13
7 2
3
4 5 6
COPYRIGHT © 1996 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
= Loctite 638
February 1998
Revision 1
FlexBody
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 4 1 1 1 1 6 2 1 1 1 1 1 2 1 1 1 1 1 1 1
13:3
Spare Part No.
821 460 109 049 403 346 435 341 816 929 812 311 821 910 13 411 811 201 21 519 109 116 21 514 820 016 13 774 13 777 13 779 825 002 13 778 109 429 109 021
Description
Remark
Screw Lens holder Spring Catch Spring Pin Screw Rod Pin Spring Washer Mechanism, complete Screw Catch Cover Socket Screw Knob Sign plate Lens holder, complete Alternatively 812 313/314
Revision 1
February 1998
Focusing screen adapter FlexBody
COPYRIGHT © 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
13:4
FLXBDY10.EPS
970521
1
2 3
18 16 17 16
15
4
14
7
11
5 7 8 9
10 11 13
6
COPYRIGHT © 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
FLXBDY11.EPS
970604
12
19
Revision 1
September 1997
Focusing screen adapter FlexBody
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1 1 1 1 2 1 2 1 1 1 2 4 1 1 1 2 1 1
13:4
Remark
Spare Part No.
436 412 436 102 436 404 436 041 830 440 402 476 109 368 413 323 413 415 413 416 436 407 823 783 436 321 402 475 809 030 815 808 436 409 829 435
Description
Level Holder Support Frame Screw Holder Holder Focusing screen Glass Frame Spring Screw Rear plate Locking arm Steel ball Spring Spring support Screw
19
1
436 041 -1
Frame, incl. focusing screen
Previous type Focusing screen adapter FlexBody. (Please see Service Info 22/97)
Revision 1
August 1997
Lubrication 13:5 FlexBody
= Isoflex Topas L32 = Barierta L25DL = Loctite 638 = Loctite 243 = Loctite 415 = Safety lacquer
FLXBDY02.EPS
960806
FLXBDY01.EPS
960624
COPYRIGHT © 1996 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
FLXBDY03.EPS
960610
Revision 0
August 1996
Repair 13:6 FlexBody
Control/adjustment of the focal length (infinity position)
Control/adjustment should be carried out each time the FlexBody has been in for repair. The FlexBody is so-called over focused. The focal length is 71.40 mm - 0.2 mm. The following test equipment is required: Planar CF80 mm lens at full aperture with controlled infinity position. Deviation max. ± 0.03 mm. Magazine fitted with a front surface coated mirror resting on the edges of the picture frame. The Hasselblad mirror with part No. 103 452 is suitable. Lens collimator.
-
-
Adjustment Adjust the lens extension mechanism to infinity position and control that the slider 109 330 is resting on the stop screw 825 764. Note! The tilt and shift controls should be in the neutral (0-) position. FLXBDY01.EPS Adjust by rotating the stop screw 825 764 and secure with safety lacquer. (See fig. below) 960624
825 764, stop screw
109 330, Slider
COPYRIGHT © 1996 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
Revision 0
August 1996
Repair 13:7 FlexBody
Centering the front mechanism (21 514)
Mount the tool 902658 (V-2075) into the lens holder and connect tool 902918 (V-2219). Turn the key using 902918 to a vertical position. Check that the free play is even in both directions. If there is more resistance at one direction than the other move the front mechanism to obtain a balance. Carry out the same procedure with the key in a horizontal position. Also check at the 180o points in both vertical and horizontal position. When the key is centralised tighten both screws 820 016. The hole for the locating pin 811 201 is bored with 1.2 mm drill. Drive in the pin until it is on a level with the lens holder and secure it with loctite. Remove the swarf and lubricate the bevel gears with grease.
FLXBDY03.EPS
960610
21 514
820 016 811 201
Revision 0
August 1996
Reflex viewfinder RMfx
14
13
4
1 12
2
3 4
5 11
6 7 10
9
8
= Loctite 243
Revision 0 September 1996
Reflex viewfinder RMfx
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 1 1 1 2 1 1 6 1 1 1 1 1 1
14
Description Remark
Spare Part No.
436 348 436 352 109 408 436 401 436 403 436 410 826 024 436 358 436 353 436 322 436 402 436 411 436 347
Rubber eyepiece Lens holder Lens Locking ring Locking ring Mirror Screw Frame Holder Housing Leather Key Lens holder
Revision 0
September 1996
Magnifying hood HM2
15
12 1
11 2 10 3
4
5
6
7
9
= Loctite 243 = Loctite 480 = Losoid 3342
Revision 0
8
September 1996
Magnifying hood HM2
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 1 1 1 1 1 1 1 6 1 1 1 1
15
Description Remark
Spare Part No.
436 348 436 346 436 344 109 408 436 345 436 101 436 350 826 024 436 358 436 411 436 401 436 347
Rubber eyepiece Holder Ring Lens Lens Holder Lens assembly Housing Screw Frame Key Locking ring Lens holder
Revision 0
September 1996
Tripod quick-coupling S
16
1 2
15
3 4 5 13 6 7 12 11 8 10 14
9
Revision 0
September 1996
Tripod quick-coupling S
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 1 1 4 1 1 1 1 1 1 1 1 1 1 1 1
16
Description Remark
Spare Part No.
812 604 406 413 406 412 810 918 406 400 406 322 406 345 406 399 825 905 825 904 828 905 406 346 13 455 13 456 406 321 816 934
Pin Pressure plate Rod Spring washer Spring Handle Holder Cover Screw Screw Nut Base Washer Level Stop key Spring
2.5 mm 3 mm, Please see Service Info 23/97
Revision 1
September 1997
Teleconverter 1.4XE
17
COPYRIGHT © 1996 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
CON1.4XE.EPS Converter 1.4XE
960730
1
2 3
14
1 16
4 5 15
6
14
13
12 7 8 9 10 11
Revision 0
September 1996
Teleconverter 1.4XE
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 3 1 2 1 1 1 1 4 4 1 1 1 1 6 1 1
17
Description Remark
Spare Part No.
826 002 435 342 829 325 435 041 816 304 435 112 435 353 815 513 435 402 435 111 435 404 403 346 435 113 812 311 816 929 435 341
Screw Cover Screw Locking mechanism Spring Holder Holder Spring Contact pin Holder Roller Spring Key Pin Spring Catch Optics Housing
Incl. 816 304
Alternatively 812 313/314
Not available as spare part Not available as spare part
Revision 0
September 1996
Meter prism viewfinder PME90
18:1
1 2 3 4
9 5 6 4 7 8 10 11 14 15 16 36 17 33 See page 18:2 13 12
18 19
4 35
34 20 33 21 24 22 23 25 26 27 28 29 30 31 12 32
Revision 0
September 1996
Meter prism viewfinder PME90
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 1 1 1 8 1 1 5 1 1 1 1 1 1 4 1 4 1 1 1 6 1 1 1 1 1 3 1 1 2 1 1 2 4 1 1 1
18:1
Remark
Spare Part No.
414 616 414 392 414 654 830 016 414 612 414 635 107 421 414 676 414 391 414 675 414 655 414 395 414 696 414 576 414 336 826 018 414 332 414 669 414 387 826 022 815 805 414 666 414 665 414 667 414 600 826 020 414 672 414 606 414 582 414 388 414 631 826 017 826 019 414 617 414 607 414 597
Description
Locking bar Light transmitter Diffusor Screw LCD Rubber contact pad O-ring Display prism 1 Display prism 2 Insulator Support Main PC board, complete Flex Pad Prism holder Screw Prism Frame Engraved frame Screw Spring Arm Arm Catch Name plate Screw Cover Support Spot diaphragm Sensor unit, complete Integral diaphragm Screw Screw Locking arm Catch Eye cup Cover Sales code No. 52191 Incl. sensor board
State serial No.
Revision 0
September 1996
Meter prism viewfinder PME90
5
18:2
1
4
3
9 10 7 8
2 6
16 18 17 15 14 13 12
11
19
20
26 25 24 27 21
23 22
Revision 0
September 1996
Meter prism viewfinder PME90
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 1 2
18:2
Remark
Spare Part No.
414 642 414 674 414 671 414 643 414 673 414 396 414 670 414 659 414 652 826 018 414 393 414 661 414 434-01 406 110 405 412 829 660 414 585 414 602 414 394 414 403 414 390 414 618 414 662 414 640 414 641 414 663 826 021
Description
Control unit, complete Shaft Battery cover Contact spring Panel Rubber keypad Circuit board Contact, Contact, + Screw Housing, complete Housing Plate spring Shoe Plate Screw Dome Leather Window Plate Eye-piece unit, complete Focusing ring Locking clip Lens, outer Lens, inner Spring Screw Battery 3 volt, type CR-123A Lithium
Revision 1
May 2000
18:3 Meter prism viewfinder PME90
Calibration:
The PME90 has microprocessor controlled electronics. Variable resistors are eliminated. The calibration is done by software writing corrections into an EE-prom. Therefore the Hasselblad Service Test System and an IBM compatible PC must be used for calibration work. The procedure is described in the Service Test System user manual. Tolerances Exposure meter: Max. deviation ± 0.3 EV. Current Drain: Max. 50uA. CAUTION! When handling the circuit board a grounded bench mat and a wrist strap must be used to prevent ESD damage.
Link to: VHABSTS
Cleaning:
Note! The figures in brackets below refers to the exploded view page 18:1. Remove the housing held by three screws (26). Separate the housing and the control unit. Disconnect the flex from the control unit. The prism: The prism is held in position by a prism holder (15) which is secured by four screws (16). After removal of the screws, the prism holder including the main PC board can be separated from the prism. Ensure that the two cables connecting the main PC board and the sensor board are not damaged. The prism can now be removed for cleaning. Note! The sensor unit and the eye-piece remains in position. The eye-piece unit: It consists of two glass lenses (three if a correction lens is installed) and is held in position by two screws. Remove the catch (35), the locking arm (34) and the screws (33). The eye-piece is now removable for cleaning. Note! The eye-piece must be rotated fully clockwise before it is removed. If not, it could damage the sensitive plastic lens mounted in the sensor unit next to it. The sensor unit: It is also held by two similar screws (33). Before it can be removed for cleaning, the two screws retaining the rear part of the main PC board must be removed. Note! Only a blower or a clean brush should be used for cleaning the plastic lens. If the lens is damaged, the complete unit should be changed. (Factory calibrated).
Revision 2 May 2000
18:4 Meter prism viewfinder PME90
Display:
Note! If the display has been disassembled for cleaning care must be taken when it is reassembled. The two prisms, the LCD and the light transmitter can easily be scratched. Reassembly: Mount the display prism 2 (1) with two screws (2). (Final position later). Mount the display prism 1 (3). Put the rubber contact pad (4) into the slot of the prism 1. Place the LCD (5) in position and push it to the left according to fig. 1. Note! The profile should face the right hand side. Cover the LCD with the diffusor (6) and make sure the upper end of the diffusor is placed underneath the PC board. Mount the light transmitter (7) and carefully secure with the locking bar (8). Re-check the LCD position. The final display position is set by adjusting the display prism 2 (1) when viewing through the eye-piece.
Display position adjustment
Profile
2 8 1 7 6 5 4 Fig. 2
Fig. 1
3
Revision 0 September 1996
18:5 Meter prism viewfinder PME90
Spot adjustment:
The spot metering system consists of two channels. Each channel has a mirror, a lens, and a metal diaphragm mounted in the sensor unit. Two sensors (light sensitive diode) are mounted on the sensor board. The position of the two diaphragms defines the spot position. Each one should be checked optically before an adjustment. (Instruction below). The diaphragms are secured with safety lacquer. Normally there is no need to adjust the spot position except when the sensor unit has been replaced. Before the spot position can be adjusted the eye-piece unit and the sensor board must be removed. The sensor board is attached to the sensor unit by two screws. Note! The eye-piece must be rotated fully clockwise before it is removed. If not, it could damage the sensitive plastic lens mounted in the sensor unit next to it. Mount the finder onto a camera body fitted with the focusing screen adapter V-4705. Illuminate each diaphragm (one at the time) from above with a concentrated light beam. The image of the diaphragm circle will be projected on the screen and is visible on the camera mirror. The image should fill the 12 mm screen circle if the spot position is correctly set. If an adjustment is required, the diaphragms can be moved according to the sketch until correct position is achieved. Do not forget to secure with safety lacquer.
Illuminate here
Spot diaphragms
Adjustment directions
Sensor unit 414388
Integral diaphragm
Revision 0
September 1996
COPYRIGHT ' 2000 ANDERS ENGSTR M
Winder CW
ANDERS ENGSTR M, ILLUSTRAT R stra v gen 46 430 91 H N tel/fax 031- 96 84 64 [email protected]
WINDCW01.EPS Winder CW
000913
19:1
5
3
4
2 1
6
8
7 18
9
17
16 14 13
10
12
15
11
Revision 1
January 2001
Winder CW
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1 1 5 1 1 1 1 2 2 1 1 1 1 1 1 1 2 1
19:1
Description Remark
Spare Part No.
438 041 830 101 438 345 438 354 438 439 438 324 438 348 438 472 438 448 22 404 438 111 820 383 438 416 826 010 438 456 438 805 826 015 438 088
Battery compartment, compl. Screw Connection plate Locking lever Cover Battery holder Connection plate Insulator Spacer Leather Housing, outer Screw Sensor holder Screw Spacer Contact flex Screw Mode selector
Revision 2
January 2001
Winder CW
1
19:2
WINDCW02.EPS Winder CW
961104
23
2 3
7 6 5
4
22
8 9 10 21
12 20
11 19
18 17 15 16
13
14
Revision 0
October 1996
Winder CW
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1 2 1 1 2 1 1 1 1 1 1 1 1 1 3 1 1 1 1 3 1 7 1
19:2
Description Remark
Spare Part No.
438 110 810 509 814 804 814 903 817 115 438 435 438 112 438 800 826 027 438 021 438 341 438 449 438 042 814 904 829 660 438 120 438 116 438 437 438 106 826 030 438 441 826 029 438 089
Locking arm Washer Spring Spring Clip Arm Clutch arm PC board Screw Winding unit, complete Coupling Spacer Release unit, complete Spring Screw Leather strap Plate Sleeve Housing, inner Screw Tape Screw Bayonet plate
Please state serial No.
Revision 3
February 1998
COPYRIGHT © 1998 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
IR Remote Control
WINDRM01.EPS Winder CW, fjärrkontroll
980130
19:3
12 1 11
10
9 2
8
6
7
3
4 5
Revision 2
February 1998
IR Remote Control
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 1 1 1 1 2 1 1 1 1 1 1 1
19:3
Description Remark
Spare Part No.
439 402 439 101 439 322 830 560 439 401 439 403 438 442 439 405 439 321 815 812 438 445
Strap Battery PC board Cover Screw Button Cover Stop pin Support Housing Spring Exposure button
3 volt, type CR-2 Lithium
Revision 2
February 1998
19:4 Winder CW
Specifications Winder CW:
Compatibility: Modes: Hasselblad 503CW and 503CXi Single exposure, continuous exposure, multiple exposure, remote control and lock/off 1.05 sec, approx. 0.8 frames/sec in continuous mode 6 x AA pen cells (LR6) 360g (13 oz) excluding batteries
Winding speeds: Battery requirement: Weight:
Specification IR Remote Control:
Battery requirement: Weight: 1 x CR-2 55g (2 oz)
Repair/Calibration:
The Winder CW requires the following equipment: Hasselblad Service Test System 970600 Adapter Winder CW 970995 (incl. cables) Torx T6 screw driver ZZ35 503CW camera body
Revision 0
October 1996
19:5 Winder CW
Disassembly:
CAUTION! When handling the circuit board a grounded bench mat and a wrist strap must be used to prevent ESD damage. Remove the battery compartment 438041. Unscrew 3 screws 829660 and 1 screw 826029, located to the right of the winder retaining slot. Separate the inner/outer housing from each other and carefully loosen the IR-sensor (contact flex) from its attachment. Disconnect the mode selector 438088 from the contact flex. Rotate one of the gear wheels of the release unit 438042 in order to move the release arm from its outer to its inner (released) position. Remove the sleeve 438437. Loosen the contact flex of the release unit from the PC board. Loosen 3 screws 826030 and remove the plate 438116 and the release unit 438042. Loosen the contact flex 438805 from the PC board. Loosen the screw 826027 and remove the board. Loosen carefully the "on/off camera" switch (see page 19:7) which is held by a double-sided tape. Loosen 2 screws 826015 and carefully remove the battery contacts. Loosen 4 screws 826029 located closest to the coupling 438341 and remove the winding unit together with the contact flex. Loosen the screws 820383 and 826010. Remove the "winding home" and the "winding counter" sensors from the winding unit (see page 19:7). Unsolder the contact flex. Loosen the remaining 2 screws 826029 and remove the bayonet plate 438089. Remove the springs 814804 and 814903 and the arms 438110, 438112 and 438435.
-
-
-
-
-
-
-
-
Revision 1
February 2000
19:6 Winder CW
Reassembly:
CAUTION! When handling the circuit board a grounded bench mat and a wrist strap must be used to prevent ESD damage. Lubricate the arms 438110, 438112 and 438435 with Gleitmo 805 K and assemble together with the springs 814804 and 814903 on the bayonet plate 438089. Solder the contact flex 438805 and fit the "winding home" and the "winding counter" sensors to the winding unit (see page 19:7). Fit the winding unit in the inner housing and secure with 4 screws 826029. Carefully fit the battery contacts and secure with 2 screws 826015. If necessary, replace the double-sided tape 438441 and place the "on/off camera" switch in its attachment (see page 19:7). Fit the PC-board and secure it with the screw 826027. Connect the contact flex to the PC-board. Make sure that the release unit 438042 (release arm) is in the inner (released) position and place it in the inner housing. Fit the plate 438116 and secure with 3 screws 826030. Fit the sleeve 438437 on the release arm and connect the contact flex to the PC-board. Connect the mode selector 438088 to the contact flex and place it in the inner housing. Connect the battery compartment (incl batteries) or a power supply set on 9V. Connect the winder to the Hasselblad Service Test System and then follow the instructions according to the STS "Users Instructions" (see page 19:7). Fit the spacer 438449 in the inner housing and 2 spacers 438448 in the outer housing. Fit the IR-sensor in its attachment and reassemble the housings. Secure with 3 screws 829660 and 1 screw 826029. Connect the winder to the Service Test System again and make a final check.
-
-
-
-
-
-
-
-
Revision 1
February 2000
19:7 Winder CW
Sensors:
Note! The gears must be rotated manually when checking the sensors. Release home Link to: VHABSTS
Release counter
Winding home
On/off camera
Release arm
Winding counter
Release arm: Sensor calibration:
Position value:
46 - 56 (Outer position)
Winding sensor RV3
Release arm sensor RV1
Release sensor RV2
Winding motor: Release motor:
No. of pulses: Reaction time in: Reaction time out: Inner position: Outer position: No. of excenter pulses:
229 - 231 Max. 50 ms Max. 150 ms 22 - 24 22 - 24 89 - 91
October 1996
Revision 0
20:1 D-Flash 40
WARNING!
For safety reasons, the main capacitors MC1 and MC2, must be discharged before disassembly. Discharge the capacitors with a 100 ohm 9 W resistor connected between GND of the sync. socket and contact 2 on the flash tube socket according to the sketch below. The voltage of the capacitors can also be measured at these points. Capacitor C10, mounted on PCB 1059, must also be discharged according to the sketch but can only be reached after disassembly of the head case.
gray
Trouble shooting guide
TRBLBLOC.EPS
991011
Flash tube socket
4 3 1 2
V
red
Main Capacitors
MC1
white
Resistor 100 ohm 9W
MC2
C10
black
V
red
PCB1059
Resistor 100 ohm 9W
CN1B (7 pin connectors) (8 pin connectors)
CN1A
CN3A
CN3B
PCB1055
PCB1056
red
black VR1
High voltage socket
CN5
blue J1 yellow
Revision 0
February 1998
20:2 D-Flash 40
Trouble shooting guide
Power is turned on.
Power switch ON
Use a power supply with more than 9 VDC, 0.5 A or new batteries.
Check oscillation sound.
Oscillation sound?
NO
A
Charge failure
YES Check if neon lamp glows.
Neon lamp glows?
NO
Ready indication failure
B
Check if ready indication light on flash unit turns on.
YES Check if ready indication light in camera viewfinder turns on. Check if the oscillation sound is interrupted or not.
ViewNO finder indication light? Ready signal failure
Check TTL cord
YES
Oscillation sound?
NO
Voltage regulator failure
C
YES Check if the unit flashes with test button.
Flash with test button?
NO
D
Flash failure
YES Check if the unit flashes with synch. and TTL cord when the camera is released.
Flash with synch. cord?
NO
Synchronize circuit failure
Check TTL cord
YES Check the unit in TTL function.
Check if the READY lamp is turned off during continuous flashing. Check if TTL function is normal. Check auto OK lamp.
READY lamp?
NO
TTL circuit failure
Replace PCB1056
YES NO
Auto OK failure Replace PCB1056
YES Release the shutter while cutting off the light entering lens on camera.
Full flash or not.
Full flash?
NO
Not full flash
Replace PCB1056
YES Check if lo flash lamp is turned off or not.
Low flash?
NO
Not low flash
Replace PCB1056
YES
Revision 0
February 1998
20:3 D-Flash 40
Trouble shooting guide
A
The voltage of the main capacitors (MC) can be measured between GND of the synchro terminal and pin 2 of the flash tube socket.
B
Inspect the battery compartment and contacts. OK Short-circuit between pin 4 and pin 5 of CN3.
NOT GOOD
Replace battery compartment and/or contacts
Adjust MC voltage with VR1
YES
Adjust voltage to 325330V
Oscillation sound?
NO
Replace PCB1056
NO
Replace PCB1056
YES Defective BATTEXT-OFF switch.
Replace PCB1055
C
The voltage of the main capacitors (MC) can be measured between GND of the synchro terminal and pin 2 of the flash tube socket.
D
Is the flash tube normal?
Voltage of MC over 330V?
NO
Check MC for leakage. Replace PCB1056 or replace PCB1059
Check if the unit flashes when pins 8 and 6 on CN3 are short-circuited? The voltage between pins 8 and 6 on CN3 must be 915V.
YES
Flash?
YES YES
Replace PCB1055 Adjustable with VR1?
NO
Replace PCB1056
NO
Voltage?
YES NO
Replace PCB1056 Adjust VR1 to 325330V
YES
Replace PCB1059 NO
YES
Adjust VR1 here
Revision 0
February 1998
D-Flash 40
COPYRIGHT © 1998 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
20:4
DFLA4010.EPS
4 3
980128
2
5
1
12 9 7
13
8 15 10 14 11
6
17 16
18 19 20
Revision 0
February 1998
D-Flash 40
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 1 1 1 1 1 2 1 1 1 1 1 2 1 1 1 1 1 1 2 1
20:4
Spare Part No. Description Remark
K0455S02A MAC0550A ZAA7560A K0455S01A CAA8781A PAA7477A ENB0103A PAB1992A NEE0250D ASS0001A PAA5308A CAA7479A GBA7561B MAD0380C PAB1978B MAC0630A CAA8601A GAA7540A ASF0360B
Flash tube Reflector Main capacitors, compl. Head case, rear Insulator Circuit board, high voltage Locking screw Socket cover Flash tube socket Locking band Locking ring Tilt assembly Holder Locking screw Label Head case, front Holder Bracket Rotating disc Cover plate Set of various type screws
Sales code No. 55123 Sales code No. 55108
Revision 0
February 1998
COPYRIGHT © 1998 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
D-Flash 40
20:5 DFLA4020.EPS
980202
21
19
1
5
4 6
2
18
3
17
8
7
9 10 14 15 20 13 16 11 12
Revision 0
February 1998
D-Flash 40
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
20:5
Spare Part No. Description Remark
MAD0472B MAB1848B MAA8200A K0455S03A MAA8610A MAA8611A CAA8607A PAA8606A GNA3370A MAA8599A PAA8600B RAA8797A CAB1983A ASZ0213A K0455S11A EXW0240A SAA8605A MAA8609A ASS0002A 13 190-1 K0455S54A ASF0360B
Lower case, rear Selector Test button Circuit board Locking device Holder Bolt Plate Cover Locking ring Plate Rubber ring Shoe High voltage socket Main circuit board TTL sync cord assembly Spring Locking lever Swivel assembly Name plate Battery compartment, compl. Set of various type screws
Revision 0
February 1998
Snap-lock flash grip
COPYRIGHT © 2001 ANDERS ENGSTRM ANDERS ENGSTRM, ILLUSTRATR stra vgen 46 430 91 HN tel/fax 031- 96 84 64
21
SNAP01.EPS
010129
[email protected]
31 30 29 28 27
26 1 2 5 3 4 6 24
25
23
10 7 8 9
11 12
13
17 18
19
20
14 16
21 22
15
= Loctite 243 = Loctite 480
Revision 2 January 2001
Snap-lock flash grip
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1 1 1 4 1 1 1 1 1 1 1 1 1 1 6 1 1 1 1 1 1 1 1 2 1 1 3 2 2 6 2
21
Description Remark
Spare Part No.
812 604 406 413 406 412 810 918 406 419 406 321 816 934 406 400 406 414 406 322 406 345 406 325 825 905 406 399 829 760 30 763 828 905 406 324 810 926 406 415 406 416 406 353 406 350 829 845 406 417 406 323 826 039 414 434 406 110 829 660 405 412
Pin Pressure plate Rod Spring washer Cable release Stop key Spring Spring Screw Handle Holder Base Screw Cover Screw Tripod foot Nut Guide Washer Locking pin Strap button Strap Basic grip Screw Strap holder Holder Screw Spring Shoe Screw Plate
Revision 3
January 2001
22:1 ArcBody/Grandagon lenses
Repair
Please note! The parallelism and the focal length of the components are pre-set at the production stage by the use of shims. If the camera/lens is dismantled, be sure to include the shims when it is reassembled (see sketches below). Please note also that only the parts provided with a number are available as spares. In cases when spare parts without numbers are required, the camera/lens should be sent to Victor Hasselblad AB, Service Department for repair. For separating the focusing mount and the shutter, unscrew the shutter flange 013 by using the tool V000507700013.
COPYRIGHT © 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
APO4501.EPS
971125
COPYRIGHT © 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
ARCBDY02.EPS
971031
Shims
COPYRIGHT © 1998 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
013, Shutter flange
ARCBDY01.EPS
980127
Shims
Revision 0
April 1998
COPYRIGHT © 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
ARCBDY03.EPS
22:2
971125
ArcBody
= Isoflex Topas L32 = Barierta L25DL = Loctite 243 = Loctite 415
Lubrication
COPYRIGHT © 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
ARCBDY02.EPS
971031
COPYRIGHT © 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
ARCBDY04.EPS
971127
Revision 0
April 1998
ArcBody
COPYRIGHT © 1998 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
22:3
ARCBDY01.EPS
980127
7 6
1
8
2
4
3 5
2
= Loctite 415
Revision 0 April 1998
ArcBody
Pos Pcs No.
1 2 3 4 5 6 7 8 1 2 2 1 1 1 1 1 1
22:3
Spare Part No.
109 462 436 412 824 967 109 463 109 468 109 468 -1 109 421 109 469 109 058
Description
Remark
Tilt scale Level Screw Shift scale Rod Rod Tape Tape Bellows Serial No. 452ER1286 - fwd Below Serial No. 452ER1286 Incl. tape
Revision 1
September 1999
ArcBody
COPYRIGHT © 1999 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
22:4
1 2 3 17 18
ARCBDY02.EPS
990906
16 4 5 6 15
7
14
8
9 13
10
12
11
Revision 1
September 1999
ArcBody
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 1 1 1 1 1 2 1 4 1 2 4 1 1 4 1 1 1 1
22:4
Spare Part No.
436 412 829 435 436 102 109 476 109 383 820 684 812 112 824 966 109 475 821 912 829 790 30 735 109 397 812 311 816 929 109 521 103 536 435 341
Description
Remark
Level Screw Holder Spring Guide Screw Pin Screw Name plate Screw Screw Tripod foot Foot Pin Spring Foam plastic strip Index Catch
Revision 1
September 1999
ArcBody
22:5
COPYRIGHT © 1998 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
ARCBDY03.EPS
980216
29
1 21 22 23 24 25 26 2 14 12 27 2 13 3 4 11 4 14 5 6 7 10 12 13 15 5 16 17 18 17 16
28
19
20
20
8
9 18 19
Revision 0
April 1998
ArcBody
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 1 5 1 2 2 1 1 4 1 2 2 2 2 4 2 2 4 2 4 2 1 1 1 1 2 1 1 1 2
22:5
Spare Part No.
13 190 -1 825 733 109 381 109 380 840 905 109 376 810 907 823 451 109 364 109 405 812 504 815 811 809 030 812 301 821 820 109 374 109 457 109 458 825 960 109 375 817 132 810 809 109 455 109 454 109 467 109 382 109 456 109 055 824 965
Description
Remark
Name plate Screw Gear pinion Slide bar Bearing Support, inner Washer Screw Gear ring Shim (0,05mm) Pin Spring Steel ball Pin Screw Lock handle Block brake Knob Screw Grip Clip Washer Bearing Gear pinion Bearing Shift housing Bearing Shift housing, complete Screw
Alternatively 109 409 (0,10mm)
Revision 0
April 1998
ArcBody
22:6
27
COPYRIGHT © 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
ARCBDY04.EPS
971127
23 14 10 9 13 11 12 8 7 15 16 17
24 25
26 22 18
19
21 20
6
1 2
4
5 3
Revision 0
April 1998
ArcBody
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 1 1 4 2 1 2 1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 2 1 1 1 2 1
22:6
Spare Part No.
825 704 109 401 821 661 812 311 812 805 308 447 830 060 810 736 109 413 109 414 109 403 109 424 109 378 815 754 109 459 826 018 811 201 109 379 22 335 412 104 812 304 823 640 22 327 22 331 22 328 821 662 109 114
Description
Remark
Screw Support plate Screw Pin Pin Screw Screw Washer Locking washer Latch Gear Spring Housing Spring Bearing housing Screw Pin Driving shaft Tooth wheel Crank arm Pin Screw Nylon string Crank Spring Screw Crank mechanism, complete
Revision 0
April 1998
COPYRIGHT © 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
ADAP1801.EPS
971103
Camera inverter mount
22:7
2 3
4 5 1 17
6
7
9
8
16
10 14 13 15
11
12
= Loctite 243
Revision 0 April 1998
Camera inverter mount
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1 1 1 1 4 1 1 1 6 1 1 2 1 1 1 1 1
22:7
Description Remark
Spare Part No.
406 322 812 604 406 413 406 412 810 918 816 934 406 400 406 345 829 790 30 763 109 388 824 968 406 399 825 905 828 905 109 398 406 321
Handle Pin Pressure plate Rod Spring washer Spring Spring Holder Screw Tripod foot Bar Screw Cover Screw Nut Base Stop key
Revision 0
April 1998
Extension tube ArcBody 8, 16, 26
COPYRIGHT © 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
22:8
APOEXT01.EPS
971204
1
2
3 4
5
Revision 0
April 1998
Extension tube ArcBody 8, 16, 26
Pos Pcs No.
1 2 3 4 5 1 1 1 4 1
22:8
Remark
Spare Part No.
403 346 435 341 816 929 812 311 812 112 Spring Catch Spring Pin Pin Barrel
Description
Not available as spare part
Revision 0
April 1998
COPYRIGHT ' 2000 ANDERS ENGSTR M ANDERS ENGSTR M, ILLUSTRAT R stra v gen 46 430 91 H N tel/fax 031- 96 84 64 [email protected]
APO4501.EPS
RODENSTOCK Apo-Grandagon 4,5/45 for ArcBody
Grandagon lenses 35 - 45 - 75
22:9
000828
1
2
3
4 4 5
6
7
= Secured with loctite
Revision 1 September 2000
Grandagon lenses 35 - 45 - 75
Pos Pcs No.
1 2 3 4 5 6 7 1 1 1 1 1 1 3 1 3
22:9
Remark
Spare Part No.
109 471 109 062 109 063 109 064 1094-0000-100 2408-010-109 2408-015-112 013 2408-015-111
Description
Locking ring 35/45 Front bayonet 35 Front bayonet 45 Front bayonet 75 Copal 0 shutter, complete Rubber grip Screw DIN 914 Shutter flange Screw DIN 912
Apo-Grandagon 4,5/35mm Apo-Grandagon 4,5/45mm Apo-Grandagon 4,5/75mm
Revision 0
January 2001
Grandagon lenses 35 - 45 - 75
COPYRIGHT © 1998 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
22:10
COPAL01.EPS
980213
1
2 3 37 4 36
35 5 7 8 13 12 14 11 10 12 9 30 33 6 32 31 34
15 12
12
28 23 18 22 24 27 23 26 25 19
16 17
29
20
21
Revision 0
April 1998
Grandagon lenses 35 - 45 - 75
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 1 1 1 1 1 1 1 1 1 2 1 4 1 1 1 2 1 1 1 1 1 1 3 2 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1
22:10
Remark
Spare Part No.
012 011 301-3 301-6 301-5 301-4 301 301-2 301-1 113-1 113 111-1 0005-082-111 0005-081-116 0005-077-120 102-1 102 110 301-7 107 108 109 109-1 107-2 107-5 107-4 108-2 108-1 107-1 107-3 0005-082-117 402-1 402-2 401-1 401-2 401-4 401 401-3 402 1094-0000-100
Description
Front plate nut Front plate Change lever Screw Change lever collar Spring for 301-3 Main cocking lever Main spring collar Main spring Screw Sync socket Screw Diaphragm scale 35 Diaphragm scale 45 Diaphragm scale 75 Screw Cable release socket Shutter speed scale Nut for 301 Preview ring Diaphragm ring Diaphragm retainer Screw Screw Screw Screw Screw Diaphragm lever Preview knob Preview ring click Preview arm 35 Click spring Click Governor sheet A Governor sheet B Set screw for 401 Slow speed governor Screw Timing dial Copal 0 shutter Complete Apo-Grandagon 4,5/35mm
Apo-Grandagon 4,5/35mm Apo-Grandagon 4,5/45mm Grandagon-N 4,5/75mm
14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
Revision 0
April 1998
Focusing screen adapter, standard
23
COPYRIGHT © 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
MATTAD01.EPS
971204
1
3
2 15 16 17
15 4
5
12
6 8 7
9
10 11 14 12 13
= Loctite 415
Revision 0 April 1998
Focusing screen adapter, standard
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1 1 1 1 1 2 1 1 1 1 4 2 4 1 2 1 1
23
Remark
Spare Part No.
436 412 829 435 436 102 436 323 402 475 830 440 402 476 413 323 413 415 109 517 302 429 436 407 830 480 436 324 815 808 436 359 436 409
Description
Level Screw Holder Frame Locking arm Screw Holder Focusing screen Glass Frame Glass holder Spring Screw Rear plate Spring Locking arm Spring support
Revision 0
April 1998
Teleconverter APO 1.4XE
. COPYRIGHT © 1998
ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
24
APO1.4XE.EPS Converter APO 1.4XE
980320
1 15 2 3 1 17
16 4 6 5
15
14
7
8 9 10 11
13 12
Revision 0
April 1998
Teleconverter APO 1.4XE
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 3 1 2 1 1 1 1 1 4 4 1 1 1 1 6 1 1
24
Description Remark
Spare Part No.
826 002 435 342 829 325 435 041 816 304 435 108 435 430 435 353 815 513 435 402 435 111 435 404 403 346 435 104 812 311 816 929 435 341
Screw Cover Screw Locking mechanism Spring Holder Reflection protector Holder Spring Contact pin Holder Roller Spring Key Pin Spring Catch Optics Housing
Incl. 816 304
Alternatively 812 313/314
Not available as spare part Not available as spare part
Revision 0
April 1998
25:1 Zoom lens FE 4.8/60 - 120 mm
General
The Hasselblad zoom lens FE 60 - 120 is disassembled and reassembled according to the exploded views, page 25:5, 25:6 and 25:7.
Note! All screws and the front number ring are secured with Loctite and/or safety lacquer and must be accordingly secured at assembly. Note! Before removing the rear lens group (A), held by the retaining ring (B), the position of the lens group in the diaphragm barrel must be marked out. This, to achieve the same optical performance as before disassembly.
In cases of repair work of the focusing mount and the zoom function (C), the complete lens must be sent to VHAB, Service Department for repair.
A B
C
Revision 0
September 1999
25:2 Zoom lens FE 4.8/60 - 120 mm
Adjustment/check of the infinity position: If an adjustment of the infinity position is required, apart from an auto collimator, a lens holder like the Hasselblad V-4937 with built in movable mirror must be used. (The lens holder V-4937 is designed to be used together with horizontal type collimators). The focal length of the collimator must be minimum 300 mm. The lens flange focal length is 74.9 mm ± 0.05 mm. The deviation at infinity between 120 and 60 mm setting must not exceed 0.05 mm. The adjustment of the infinity is made in the production by adding a combination of spacers (A) in different thicknesses behind the bayonet plate and by rotation of the front group. For reference of the assortment of spacers, please see the specification page 25:6. Proceed as follows: - The lens should be fully assembled except for the number ring (ADK1371J) and the front tube (ADK1368K). Make sure that all original spacers are refitted. - Untighten the four retaining screws (B) carefully. Please note that the screws are sealed with safety lacquer. - Mount the lens in the lens holder for collimator inspection. - Set the focusing ring to infinity and the zoom ring to 120 mm position. - Rotate the front group until the infinity image is achieved by looking in the collimator. For convenience, use the tool (ADK1KJ45) when rotating. - Set the zoom ring to 60 mm position with the focusing ring still kept in the infinity setting. - If necessary, readjust the front group to obtain the infinity image again. - Set the zoom ring to 120 mm and recheck. - Repeat the front group rotation setting until 60/120 mm positions have the same (not necessarily 74.9 mm) flange distance within 0.05 mm. - Adjust with spacers (if necessary) to ensure the 74.9 mm flange distance.
Repair
A
B
Revision 0
September 1999
25:3 Zoom lens FE 4.8/60 - 120 mm
Repair
Adjustment/check of the aperture unit (exploded view and specification, page 25:7): - Reassemble the aperture unit completely except for the locking ring (95258K) and the cam ring (970352R). - Mount the cam ring in the Cam ring gauge (ADK1KJ01) according to fig. 1 below. - Make sure that the aperture setting lever (970353T) fits properly. If not, adjust by loosening the two screws (11772J) and reset. Tighten the screws and secure with safety lacquer. - Refit the cam ring and the locking ring to the aperture unit. - Check the fully opened position of the aperture blades by moving the coupling (98282Z) in and out. The blades should disappear completely at that moment when the coupling is fully released. If not, adjust by turning the eccentric No.1, fig. 2 below. Note! The four screws (12011T) most be slightly untightened before the adjustment. - Mount the aperture unit in the Adjustment gauge (ADK1KJ08) and check the smallest aperture by using the aperture test pin (ADK1KJ07) according to fig. 3 below. The blades should just touch without any resistance. FE612__2.EPS If an adjustment is required, turn the eccentric No. 2, fig. 3 below. 990615 FE612__3.EPS Note! The four screws (12011T) most be slightly untightened before the adjusment. 990615 - Tighten the screws and mount the aperture unit in the lens.
COPYRIGHT © 1999 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
COPYRIGHT © 1999 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
970353T 11772J
Eccentric No.1
COPYRIGHT © 1999 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
98282Z
FE612__1.EPS
990615
Eccentric No.2
Fig. 1
Fig. 2
Cam ring gauge (ADK1KJ01)
Aperture test pin (ADK1KJ07)
12011T Fig. 3
Revision 0
Aperture adjustment gauge (ADK1KJ08)
September 1999
25:4 Zoom lens FE 4.8/60 - 120 mm
Tool No.
ADK1KJ01
Tools
Description
Cam ring gauge
Used for
Aperture setting lever adjustment
ADK1KJ03
Spacer mounting gauge
Mounting tool for the bayonet plate and infinity spacers
ADK1KJ07
Aperture test pin
Reference of smallest aperture
ADK1KJ08
Aperture adjustment gauge
Adjustment of aperture
ADK1KJ14
Wrench number ring
Removal of number ring
ADK1KJ15
Wrench rear group
Removal of retaining ring for rear group
ADK1KJ45
Wrench front group
Adjustment of front group infinity position
Auto collimator
Adjustment of the infinity position
Revision 0
September 1999
Revision 0
COPYRIGHT © 1999 ANDERS ENGSTRÖM
ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
September FE612010.eps 1999
990510
6
5 4 3 1 2
Hasselblad FE 4.8/60 - 120 mm
25:5
Hasselblad FE 4.8/60 - 120
Pos No.
1 2 3 4 5 6
25:5
Description
Number ring Screw Front tube Rubber grip, focus Locking screw Rubber grip, zoom
Pcs
1 4 1 1 4 1
Spare Part No.
ADK1371J 11725Q ADK1368Q 99673R 71735M 99672M
Remark
Revision 1
January 2001
Revision 0
COPYRIGHT © 1999 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
September 1999
FE612020
990614
9
1
3 6 17 11 15 2 8 7 4 5 25 23 24 40 29 34 30 22 21 31 20 42 18 19 26 27 28 33 32 43 41 36 35 16 10 12 13 14 37
38 39
Hasselblad FE 4.8/60 - 120 mm
25:6
Hasselblad FE 4.8/60 - 120
Pos No.
1 2 3 4 5 6 7 8 9
25:6
Description
Aperture ring Screw Aperture scale ring Screw Aperture unit cover Retaining ring PC-board Screw Spacer 1.00 mm Spacer 0.50 mm Spacer 0.20 mm Spacer 0.10 mm Spacer 0.05 mm Spacer 0.03 mm Key Spring Locking mechanism Bayonet plate Screw Screw Rear cover Screw Screw Barrel Screw Spring Screw Spring Stell ball Screw Screw Stop down plate Stop down button Screw Attachment Stop down lever Plate
September 1999
Pcs
1 2 1 4 1 1 1 4 1
Spare Part No.
ADK1373L 51491L ADK1364K 11405BL 99671J ADK1090W ADK1891M 11445G 96324P 96325S 96326W 96327Z 96328J 96329M ADK1957P 816 304 435 041 ADK1340V 11443AW 829 325 ADK1375P 11706BP 11718AY ADK1360Z 11461AY 94351X 51492Q 94325X 94506J 11490M 517085Y 970357J 98283J 11706J 970354W ADK1388V 99670X
Remark
For infinity adjustment (See page 25:2) " " " " "
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Revision 0
1 1 1 1 8 2 1 4 4 1 2 1 1 1 1 8 1 1 1 2 1 1 1
Hasselblad FE 4.8/60 - 120
Pos No.
33 34 35 36 37 38 39 40 41 42 43
25:6
Description
Screw Sliding contact Stop down ring Aperture coupling lever Aperture coupling ring Plate Sliding contact Screw Screw Screw Locking ring
Pcs
2 1 1 1 1 1 1 2 2 1 1
Spare Part No.
11725Q 970347Z ADK1387T ADK1372K ADK1338H 99669P 970346X 11441BR 11725Q 51490H 95259P
Remark
Revision 0
September 1999
Revision 0
COPYRIGHT © 1999 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
September 1999
FE612030
990902
23 7 6 14 3 1 9 13 12 11 15 24 27 19 8 20 21 22 25 26
10 5 2 4 17
16
18
Hasselblad FE 4.8/60 - 120 mm
25:7
Hasselblad FE 4.8/60 - 120
Pos No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25:7
Description
Locking ring Screw Cam ring Screw Aperture setting lever Clip Coupling Coupling Shaft Stop ring Clip Washer Plate Lever Stop Screw Spring Spring Screw Diaphragm barrel assembly Blade ring Aperture blade set Cover Washer Washer Washer Washer Washer Screw Spring Set of 8 blades 0.20 mm (standard) 0.25 mm (for adjustment of play) 0.30 mm (for adjustment of play) 0.35 mm (for adjustment of play)
Pcs
1 2 1 1 1 1 1 1 1 1 3 2 1 1 1 1 1 1 4 1 1 1 1 1
Spare Part No.
95258K 11772J 970352R 51489R 970353T 95262M 98281W 98282Z 98284M 98285R 95078H 95260Z ADK1968S 98280S 970356G 11772J 94349H 94348Y 12011T ADK1969T ADK1924X ADK1903R ADK1923W 95263R 95264V 95265Y 95266H 95063Y 11707AQ 94350T
Remark
25 26 27
2 1 1
Revision 0
September 1999
View magnifier
26
COPYRIGHT © 1999 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
LUP0010.EPS
990816
1
2
3
4
5 6
8 7
Revision 0
September 1999
View magnifier
Pos Pcs No.
1 2 3 4 5 6 7 8 1 1 3 1 1 1 1 1
26
Description Remark
Spare Part No.
418 392 418 390 825 001 418 431 418 101 810 650 812 605 418 412
Plate focusing eyepiece Screw Ring Screw Washer Pin Rubber eyepiece
Revision 0
September 1999
Winder F
4
27:1WIND0001
920813
3
7
5 2 6 10 1 9 8
10 14 15 Double-sided tape
16 13
17
12
18
11 19
20 21
22 23
COPYRIGHT © 1992 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
Revision 1
November 1999
Winder F
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1 1 2 1 1 1 5 1 1 2 6 1 1 1 1 1 1 1 1 3 1 1 1
27:1
Spare Part No.
419 021 419 302 821 663 419 436 419 110 419 116 419 516 419 111 823 650 826 009 419 347 419 350 13 593 419 484 419 439 419 503 419 431 419 435 821 460 419 434 822 601 419 508
Description
Battery compartment Battery compartment Screw Leather Contact plate, right Spacer Battery Removal strap Contact plate, left Screw Screw Locking knob Fuse holder Fuse Sign plate Connection plate Connection plate Plate spring Leather Screw Cover Screw Shell Complete
Remark
1.5 volt, size AA
1.6 A, slow-blow
Revision 1
November 1999
Winder F
2 1
27:2
WIND0002
920626
3 1
4
18 20 16 19 15
5 6
18 7 17 16 15 11 14 8
9 10 13 12
Revision 1
COPYRIGHT © 1992 ANDERS ENGSTRÖM ANDE