Text preview for : servtools.pdf part of Nokia 6081 Service Manual, Part, Variant, Tools, Troubleshooting, Schematic, ecc. - File 33
Back to : NME-2A.part1.rar | Home
Programmes After Market Services (P.A.M.S.) Technical Documentation NME2A SeriesTransceivers
Service Tools/Accessories
Original 08/97
NME2A Service Tools/Accessories
P.A.M.S. Technical Documentation
[This page intentionally left blank]
Page 2
Original 08/97
P.A.M.S. Technical Documentation
NME2A Service Tools/Accessories
Contents Service Tools/Accessories
Page No
List of Service Accessories Audio Test Box JBA3 Product Code View of Audio Test Box Service Cable Product Code View of Service Cable System Cable SCM1 Product Code View of System Cable Remote SIM Reader CAE2 and SIM Snap with Connector & Cable DKS4 Product Code View of External SIM Reader and Accessories SIM Guide Removal Tool SRT1 Product Code View of SIM Guide Removal Tool Modular Cable DKH1 Product Code View of Modular Cable PC/MBUS Adapter DAU2 Product Code View of DAU2 D9/D25 RS232 Adapter Product Code View of Adapter SW Security Device "Dongle" PKD1 Product Code View of SW Security Device Flash Prommer FPS3 Product Code View of Flash Prommer 5 5 5 6 6 6 6 7 7 7 8 8 8 9 9 9 10 10 10 11 11 11 11 11 11 12 12 12 13 13 13
Original 08/97
Page 3
NME2A Service Tools/Accessories
P.A.M.S. Technical Documentation
This page intentionally left blank.
Page 4
Original 08/97
P.A.M.S. Technical Documentation
NME2A Service Tools/Accessories
List of Service Accessories
Audio Test Box JBA3
The Audio Test Box has two main functions: To assemble the DAU2 PC/MBUS adapter cable, the Handset's spiral cable, and the Transceiver MBUS cable, so service software's audio test can be performed. To connect the handset audio to the Celluar GSM Tester, so the the audio frequency and audio signal value can be measured. It is also possible insert an external audio generator into "Ext MIC Input", and switch between the ext. audio and int. handset MIC. E.i. with the switch in the "Handset MIC Output" position it is possible to monitor signals from the handset and when the switch is in the "Ext MIC Input" position an external microphone/generator may be monitored. The "Handset EAR Output" is output from the transceiver to the earpice, monitoring the uplink signal. For audio testing connect the coaxial cable as follows: Connect both coaxal BNCBNC cable to the connectors of AudioTest Box marked as Ext MIC input and Handset EAR output. Attach Handset EAR output line to AF INPUT of test equipment. Attach EXT MIC input line to MOD GEN OUTPUT of test equipment and switch to "EXT MIC INPUT". For service software use connect the cable as follows: Attach the handset's spiral cable to the "Handset" on the Audio Test Box Attach one end of the DKH1 Modular cable to the DAU2 and the other end to the Audio Test Box. Attach one end of the DKH1 Modular cable to the phone's system cable and the other end to the Audio Test Box.
Product Code
Audio Test Box JBA3:
0694044
Original 08/97
Page 5
NME2A Service Tools/Accessories
P.A.M.S. Technical Documentation
View of Audio Test Box
Service Cable
The service cable offers an optional possibility to test phone if audio test box is not available.
Product Code
Service Cable:
0730038
View of Service Cable
Page 6
Original 08/97
P.A.M.S. Technical Documentation
NME2A Service Tools/Accessories
System Cable SCM1
The system cable connects the phone to the power supply and service accessories.
Product Code
System Cable:
0730066
View of System Cable
G0730066
Original 08/97
Page 7
NME2A Service Tools/Accessories
P.A.M.S. Technical Documentation
Remote SIM Reader CAE2 and SIM Snap with Connector & Cable DKS4
The Remote SIM Reader has only one function, namely to connect a SIM card to the phone when it is disassembled. The normal SIM card holder can not be used as it is part of the mechanics. The reader consists of two parts: firstly a snap with integrated PCB and a cable and secondly a modified NME1 external cardreader. (can only be used for this application !) The function is very simple. A large SIM card (network or test SIM) is insertedinto the SIM reader, the 8pin modular connector is connected to the reader and the snap is fitted on top of the SIM reader mounted on the PCB and clicked in position. Observe that the card detect switch is engaged. The NME2 transceiver is then operational.
Product Code
Remote SIM Reader CAE2: SIM Snap with Connector & Cable DKS4:
0630098 0750106
View of External SIM Reader and Accessories
Page 8
Original 08/97
P.A.M.S. Technical Documentation
NME2A Service Tools/Accessories
SIM Guide Removal Tool SRT1
The tool is designed to destructively remove the SIM guide plastic part from the bottom enclosure. To remove a SIM guide, insert the little steel plate under the SIM guide and apply downward force to the lever and the guide will breake off. New SIM guides can be ordered, code 9450588.
Product Code
SIM Tool SRT1:
0750104
View of SIM Guide Removal Tool
Original 08/97
Page 9
NME2A Service Tools/Accessories
P.A.M.S. Technical Documentation
Modular Cable DKH1
DKH1 is a standard 1 meter long flat cable with male modular8 connectors in both ends. In a complete service concept two pieces of the DKH1 is needed.
Product Code
Modular Cable:
9780084
View of Modular Cable
Page 10
Original 08/97
P.A.M.S. Technical Documentation
NME2A Service Tools/Accessories
PC/MBUS Adapter DAU2
DAU2 is connected between the phone and the serial (COM) port of the PC. It matches the M2BUS data bus signals to the serial data bus of the computer.
Product Code
PC/MBUS Adapter DAU2:
0750006
View of DAU2
D9/D25 RS232 Adapter
Suitable adapter between DAU2 and computers having 9 pin D connector as a serial port.
Product Code
D9/D25 RS232 Adapter:
4626170
View of Adapter
Original 08/97
Page 11
NME2A Service Tools/Accessories
P.A.M.S. Technical Documentation
SW Security Device "Dongle" PKD1
SW security device "Dongle" is a piece of hardware enabling the use of the service software when connected to the parallel (LPT) port of the PC. Whitout the dongle present it is not possible to use the service software. Printer or any such device can be connected to the PC through the dongle if needed.
Caution: Make sure thet you have switched off the PC and the printer before making connections! Caution: Do not connected the PKD1 to the serial port. You may damage your PKD1!
Product Code
SW Security Device PKD1:
0750018
View of SW Security Device
Page 12
Original 08/97
P.A.M.S. Technical Documentation
NME2A Service Tools/Accessories
Flash Prommer FPS3
FLASH prommer is used to update the main software of the phone, should that some day become necessary. Updating is done by first loading the new MCU software from PC to the FLASH prommer and then loading the new SW from prommer to the phone. When updating more than one phone in a row, the new MCU SW must be loaded to the prommer only in the beginning. Service software (called also PC Locals) is used to control the functions of the phone with IBM compatible PC/286 or higher or compatible personal computer during the service work. PC and PC Locals are maybe the most important service tools nowadays. Please refer to the Flash Prommer's user's guide for instructions on the flash prommer's installation and operation.
Product Code
Flash Prommer:
0770017
View of Flash Prommer
Original 08/97
Page 13
NME2A Service Tools/Accessories
P.A.M.S. Technical Documentation
This page intentionally left blank.
Page 14
Original 08/97