Text preview for : Minnesota DJ30......OperatingInstruction.pdf part of Blaupunkt Minnesota DJ30 Minnesota DJ30......OperatingInstruction
Back to : Minnesota DJ30......Opera | Home
Radio / Cassette
Augsburg C30 Boston C30 Dublin C30 Minnesota DJ30 Montreux C30 Ontario DJ30
Operating instructions
Bitte aufklappen Open here Ouvrir s.v.p. Aprite la pagina Hier openslaan a.u.b. Öppna Por favor, abrir Favor abrir 2
1 2
4 3 5 6 17 7 8 16 9 15 14 13 10 11 12
3
SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH
PORTUGUÊS
ESPAÑOL
OPERATING ELEMENTS
1 button to unlock release panel (for the Boston C30, Dublin C30, Montreux C30 and Ontario DJ30 only) FMT button, selects the FM memory levels, starts the TravelStore function (for the Boston C30, Dublin C30, Montreux C30 and Ontario DJ30 only) FM button, selects the FM memory levels (for the Augsburg C30 and the Minnesota DJ30 only) Volume control ON button, switches the unit on/ off, mute RDS button, switches the RDS convenience features on/off, selects display for variable text M·L button, selects the MW and LW wavebands (for the Boston C30, Dublin C30, Montreux C30 and Ontario DJ30 only) TS button, starts the TravelStore function (for the Augsburg C30 and the Minnesota DJ30 only) Cassette eject Cassette slot FR button, fast rewind FF button, fast forward GEO button, adjusts balance and fader < CD·C button, switches the sound source between radio, cassette and CD changer (if connected) AUDIO button, adjusts bass and treble LD, switches the Loudness function on/off Cursor buttons MENU button, activates the menu for the basic settings , displays the time 1 - 5 buttons TRAFFIC button, switches traffic information standby on/off
2
=
> ? @ A
3 4 5 6
7 8 9 : ;
24
CONTENTS
Traffic safety .................................. 26 Installation ..................................... 26 Accessories .................................. 26 Guarantee ..................................... 26 International telephone information .. 26 Starting CD changer operation ...... 38 Selecting CDs ............................... 38 Selecting tracks ............................ 38 Audible fast forward/reverse (CUE/REVIEW) ............................. 38 Switching the display mode ........... 38 Repeating individual tracks or entire CDs (REPEAT) .................... 38 Playing tracks in random order (MIX) ............................................. 39 Stopping the MIX function ............. 39 Scanning all of the tracks on all of the CDs (SCAN) ....................... 39 Adjusting Scantime ........................ 39
DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH
Important information ............ 26
CD changer operation ............ 38
Theft protection system ......... 27
Removable front panel ................... 27 Code theft protection .................... 28
Switching the car audio system on/off ......................... 29 Volume control ....................... 30
Adjusting the power-on volume ...... 30 Mute ............................................. 31 Mute during telephone operation ... 31 Switching the beep tone on/off ...... 31
Clock ...................................... 40
Displaying the clock briefly ............ 40 Setting the time ............................. 40 Selecting the 12/24-hour time display mode ................................. 40 Activating the clock for display when the car audio system is switched off ................................... 40 Displaying the time briefly when the car audio system is switched off ................................................. 40
Radio operation ...................... 32
Switching to the radio mode .......... 32 Special RDS functions (AF, REG) .. 32 Selecting wavebands/ memory banks ............................... 32 Tuning into radio stations ............... 33 Adjusting seek tuning sensitivity ..... 33 Storing radio stations ..................... 33 Recalling stored radio stations ....... 34 Program Type (PTY) ...................... 34 Interference-related treble cut (HICUT) ........................................ 35 Selecting the display of variable text ................................................ 35
Adjusting the tone .................. 41
Adjusting the bass ......................... 41 Adjusting the treble ....................... 41 Switching Loudness on/off ............ 41
Traffic information .................. 36 Tape deck operation .............. 37
Starting tape deck operation .......... 37 Cassette eject ............................... 37 Changing cassette sides ............... 37 Fast forward/rewind ...................... 37 Traffic information during cassette playback ........................................ 37
Adjusting the balance and fader ....................................... 42
Adjusting the balance .................... 42 Adjusting the fader ........................ 42
External audio sources .......... 42
Switching the AUX output on/off .... 42
Specifications ........................ 43
25
IMPORTANT INFORMATION
Important information
We are happy that you decided to purchase a Blaupunkt car audio system and hope that you will enjoy your new sound system. This instruction manual was designed to help you use your new car audio system in the optimum way. Please take the time to read the instruction manual carefully and make yourself familiar with the audio equipment. Keep this manual handy in your car for future reference. Remote control unit The optionally available RC 08 infrared remote control unit allows you to conveniently operate the most important system functions from the steering wheel. Amplifiers All Blaupunkt amplifiers can be used. CD changers The following CD changers can be connected directly: CDC A 06, CDC A 08, CDC A 072 and IDC A 09. The CDC A 05 and CDC A 071 can be connected with an adapter cable (Blaupunkt no. 7 607 889 093). The Minnesota DJ30 and the Ontario DJ30 both come included with the CDC A 08 CD changer.
Traffic safety
Traffic safety is always the top priority. Do not attempt to operate your car audio system unless the traffic conditions permit. Familiarize yourself with the equipment before you start driving. Always make sure that you are still able to hear any warning signals coming from outside the vehicle, such as police or fire engine sirens, at all times. As a result, please always select a moderate volume for playing your car audio system while you are driving.
Guarantee
The scope of the guarantee is determined by the laws in the country where the unit is purchased. Regardless of the legal guarantee regulations, Blaupunkt affords a 12-month guarantee. If you have any questions about the guarantee, please contact your authorised Blaupunkt dealer. Your cash register receipt is a valid guarantee coupon.
Installation
If you would like to install your new car stereo yourself or add other audio components to the existing ones, then please read the instructions on installation and connection at the end of this manual carefully.
International telephone information
If you have any questions on the operation of this equipment or require more information, just give us a call! You will find the international telephone and fax numbers on the last page of this manual.
Accessories
Use only Blaupunkt-approved accessories. 26
THEFT PROTECTION SYSTEM
Removable front panel
Your new car audio system (Boston C30, Dublin C30, Montreux C30 and Ontario DJ30) has been equipped with a removable front panel (release panel) to protect it against theft. Without this operating panel, the equipment is useless to thieves. Protect your car audio system against theft and take the operating panel with you each time you leave the vehicle. Never leave the release panel in the car, even if it is well hidden. The panel has been designed so that it is easy to remove. Notes: q Do not drop the release panel. q Do not expose the release panel to direct sunlight or other heat sources. q Do not expose the release panel to moisture. q Store the release panel in the case supplied. Removing the operating panel
q
q
q
Replacing the operating panel
guides from left to right.
Press the left-hand side of the panel onto the car audio system until it locks into place.
Press
1.
The release panel will unlock.
1
27
PORTUGUÊS
Note: q While replacing the panel, be careful not to press on the display. If the car audio system was on when you removed the panel, it will automatically switch back on using the same settings when you replace it (radio, tape deck or CD changer).
ESPAÑOL
SVENSKA
NEDERLANDS
ITALIANO
Slide the operating panel into the
FRANÇAIS
ward and then slide it to the left to remove it. When you remove the operating panel, the car audio system will automatically switch off. All of the settings will remain stored. A cassette tape inserted into the car audio system will remain in place.
ENGLISH
DEUTSCH
Theft protection system
First pull the operating panel for-
THEFT PROTECTION
Code theft protection
To protect your car audio system against theft, it has been equipped with a fourdigit code number. This number has to be entered each time the car audio system is disconnected from its power supply. The code inquiry is not activated for the car audio system at the factory, but you can activate it yourself. You will find the code number in the Radio Pass. Note: Do not leave the Radio Pass in your vehicle! Activating/deactivating the code Entering the code number
Switch on the car audio system.
"CODE" and then "0000" will appear in the display.
Press station key 1 @ repeatedly
until the first digit of your code number appears in the display.
Press station key 2 @ repeatedly
until the second digit of your code number appears in the display.
Press station key 3 @ repeatedly
until the third digit of your code number appears in the display.
Press station key 4 @ repeatedly
until the fourth digit of your code number appears in the display.
To switch the code on/off, proceed
as follows:
Press 4 to switch the car audio
system off.
When the correct code number appears in the display, press >. Note: If you enter the code number incorrectly three times in succession, a waiting period of one hour will go into effect. "WAIT 1 H" will appear in the display. During this waiting period, the car audio system must remain switched on.
Press and hold down station keys
1 and 4 @ at the same time.
While holding down these keys,
press 4 to switch the car audio system on.
Continue to hold down the keys until "BLAU" - "PUNKT" appears in the display.
Release the keys.
The coding has now been activated.
To deactivate the code, follow exactly the same steps. To ensure that unauthorized persons do not deactivate the code, you will be required to enter the code to finish the process.
28
THEFT PROTECTION
Activating/deactivating the LED code To visibly indicate that the Augsburg C30 and the Minnesota DJ30 are equipped with theft protection, you can activate the code LED. The code LED will flash in key 4 when the car audio system is switched off.
SWITCHING ON/OFF
DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH
Switching the car audio system on/off
The car audio system can be switched on/off in a number of ways. Switching the car audio system on/ off with the ignition If the car audio system has been connected to your vehicle ignition, it is possible to switch it on and off with the ignition. You can also switch the car audio system on when the ignition is switched off.
Press MENU ?.
"MENU" will appear in the display.
Press
or > repeatedly until "LED" appears in the display. "OFF" or "ON" will appear next to LED in the display. or >.
Press down and hold 4 until the
car audio system switches on. Note: To prevent the car battery from running down, the radio will switch off again automatically after one hour. Switching the car audio system on/ off with the removable front panel (for the Boston C30, Dublin C30, Montreux C30 and Ontario DJ30 only)
To switch the LED on or off, press Once you have completed your
settings, press MENU ?.
Remove the release panel.
The car audio system will switch off.
Replace the release panel.
The car audio system will switch on again. The last settings used (radio, tape deck or CD changer) will be activated.
29
SWITCHING ON/OFF
Switching the car audio system on/ off by pressing 4
VOLUME CONTROL
Volume control
The car audio system volume can be adjusted to levels from 0 (off) to 66 (maximum).
Press 4 to switch the car audio
system on.
Press 4 for longer than two seconds to switch the car audio system off again. The system will then switch off. Switching the car audio system on by inserting a cassette tape If the system is switched off and there is no cassette in the tape deck,
To increase the volume, turn the
volume control knob 3 to the right.
To decrease the volume, turn the
volume control knob 3 to the left.
Adjusting the power-on volume
It is possible to adjust the volume at which the car audio system switches on.
insert a cassette into the tape deck
with the open side facing towards the right until you hear it click into place. Do not use force. The audio system will switch on. Tape playback will begin.
Press MENU ?.
"MENU" will appear in the display.
Press Press
or > repeatedly until "ON VOL" appears in the display.
> to adjust the volume. If you adjust this setting to "0", the car audio system will switch on at the volume used before it was switched off. Warning of serious injury If the power-on volume is set to the maximum level, it may be extremely loud when the car audio system is switched on. If the power-on volume is set to 0 and the car audio system was played at maximum volume before it was switched off, it may be extremely loud when the car audio system is switched back on. This could result in serious injury to your ears!
Once you have selected the desired settings, press MENU ? twice. 30
VOLUME CONTROL
You can reduce the volume of the car audio system immediately (mute). For a number of functions you will hear a beep if you press a key for longer than two seconds, e.g. if you want to store a radio station on a station preset.
DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH
Mute
Switching the beep tone on/off
Press 4 briefly.
"MUTE" will appear in the display. Selecting the mute level It is possible to select the mute level.
Press MENU ?.
"MENU" will appear in the display.
Press MENU ?.
"MENU" will appear in the display.
Press
Press Press
level.
or > repeatedly until "MUTE LVL" appears in the display. > to select the mute
or > repeatedly until "BEEP" appears in the display. "ON" or "OFF" will appear next to "BEEP" in the display. or >.
To switch this function on or off,
press
Once you have adjusted the settings, press MENU ?.
Once you have made your selection, press MENU ? twice.
Mute during telephone operation
If your car audio system is equipped with a mobile telephone, it will automatically switch to mute when you use the phone. This will not work unless the mobile phone is connected to the car audio system as described in the installation instructions. If a traffic announcement is received during a phone call and traffic information priority has been activated, you will hear the traffic announcement. For more information, refer to the section on "Traffic information".
31
RADIO OPERATION
Radio operation
This car audio system has been equipped with an RDS radio receiver. Along with their regular station programming, many FM radio stations now transmit the RDS signal, which contains such other information as the station name and the program type (PTY). As soon as the car audio system receiver detects the station name, it will appear in the display. It is also possible to display the program type. For more information, refer to the section on "Program Type (PTY)". Note: It is necessary to activate/deactivate REG in the menu. Switching REG on/off
Press MENU ?.
"MENU" will appear in the display.
Press
or > repeatedly until "REG" appears in the display. "OFF" or "ON" will appear next to "REG". or > to switch REG off
Press
or on.
Switching to the radio mode
If you are currently using the tape deck or CD changer,
Once you have completed your
settings, press MENU ?. Switching RDS functions on/off
press CD·C < repeatedly until
"RADIO" appears in the display.
To take advantage of the RDS
functions for AF and REG, press RDS 5. When the RDS functions have been activated, RDS will light up in the display.
Special RDS functions (AF, REG)
The special RDS functions for AF (Alternate Frequency) and REG (Regional) enhance the performance of your car audio system. q AF. If this RDS function is activated, the car audio system continuously searches in the background for the frequency with the best reception for the station you have tuned into. q REG. A number of radio stations broadcast different regional programming at different times of the day. Use REG to prevent your car audio system from tuning into alternate frequencies which might have different programming. 32
Selecting wavebands/memory banks
Using this car audio system, you can tune into radio stations on the FM, MW and LW (AM) wavebands (MW and LW are not available for the Augsburg C30 and the Minnesota DJ30). There are three memory banks for the FM waveband and one memory bank each for MW and LW. You can store five stations in each of these memory banks. Selecting the FM memory level
To switch between the FM memory
levels, press FMT or FM 2.
RADIO OPERATION
DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH
Selecting the MW or LW memory levels
before already. To do this, start the TravelStore function.
To switch between the MW and LW
memory levels, press M·L 6 (not available for the Augsburg C30 and the Minnesota DJ30).
Adjusting seek tuning sensitivity
It is possible to adjust the sensitivity of the seek tuning function to tune the radio into stations with strong reception signals only, or to those with weaker reception signals as well.
Tuning into radio stations
You can tune into radio stations in a number of different ways. Automatic seek tuning Press or >. The radio will tune into the next available station within reception range. Manual station selection You can also tune into radio stations manually. Press or >. Note: You cannot use manual tuning unless the RDS function and the PTY function are deactivated. Paging through the broadcasting network (for FM only) If a radio broadcasting network has more than one station, you can page through the "station network".
Press MENU ?.
"MENU" will appear in the display.
Press
or > repeatedly until "SENS" appears in the display. The currently selected setting will appear next to "SENS". "SENS HI6" indicates the highest level of sensitivity, "SENS LO1" the lowest. If you select "SENS LO", lo will light up in the display. > to select the desired sensitivity.
Press
Once you have made your selection, press MENU ?.
Storing radio stations
Storing radio stations manually
Select the desired memory bank
FM1, FM2, FMT or either MW or LW (MW and LW are not available for the Augsburg C30 and the Minnesota DJ30).
Press
or > to tune into the next station in the network.
Note: To take advantage of this function, you must have activated the RDS functions and deactivated the PTY function. It is only possible to tune into those stations which have been received once
Tune the radio into the desired station.
Press and hold down one of the
station preset buttons 1 to 5 @ on which you want to store the radio station for longer than two seconds. 33
RADIO OPERATION
Storing radio stations automatically (TravelStore) You can automatically store the five radio stations with the strongest reception in your current reception area (for FM only). These stations will be stored in the FMT memory bank. Note: Any stations stored previously in the memory bank will be deleted. These program types can include: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS Using the PTY function, you can select the radio station according to the type of program being broadcast. As soon as the radio registers a radio station broadcasting the program type selected, it will automatically switch from the station playing or from the tape deck or CD changer mode to that station. Switching PTY on/off
Press and hold down FMT 2 for
longer than two seconds or press TS 6 briefly (for the Augsburg C30 and the Minnesota DJ30 only). The storing process will begin. "T-STORE" will appear in the display. After the stations have been stored, the radio will automatically begin to play the station stored on preset button 1 for the FMT memory bank.
Press MENU ?.
"MENU" will appear in the display.
Press
or > repeatedly until "PTY ON" or "PTY OFF" appears in the display.
Recalling stored radio stations Select the desired station memory
bank or waveband.
Press
or > to switch this function either on or off. setting, press MENU ?.
Once you have made the desired
Selecting the program type and starting seek tuning
Press the station button 1 to 5 @
on which you have stored the desired radio station.
Program Type (PTY)
In addition to the radio station name, a number of FM stations transmit information on the type of program they broadcast. This car audio system has been equipped to receive and display this information.
Press
or
>.
The currently selected program type will appear in the display.
If you would like to select a different program type, press or > to switch to another program type.
Press
or > to start seek tuning. The next radio station broadcasting the program selected will begin to play.
34
RADIO OPERATION
Note: If the radio is not able to find a station broadcasting the program type selected, you will hear a beep and "NO PTY" will appear briefly in the display. The station selected previously will then resume play. Selecting the PTY language It is possible to select the language in which the program type is displayed. "HICUT 0" indicates that the function is switched off; "HICUT 1" means that the treble will be automatically cut as far as possible.
DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH
Once you have completed your
settings, press MENU ?.
Selecting the display of variable text
A number of radio stations use the RDS signal to transmit advertising or other texts in place of their station names. These "variable texts" will appear in the display. It is possible to adjust your radio so that these "variable texts" do not appear.
Press MENU ?.
"MENU" will appear in the display.
Press
or > repeatedly until "PTY LANG" appears in the display. or > to select from among German, English and French.
Press
Press and hold down RDS 5 until
"NAME FIX" appears in the display.
To have the "variable texts" displayed again, press and hold down RDS 5 until "NAME VAR" appears in the display.
When the language you wish to activate appears in the display, press MENU ? twice.
Interference-related treble cut (HICUT)
The HICUT function improves reception when reception begins to deteriorate. If interference occurs, then the treble and the noise is cut automatically. Switching HICUT on/off
Press MENU ?.
"MENU" will appear in the display.
Press Press
or > repeatedly until "HICUT" appears in the display. or on or off. > to switch HICUT
35
TRAFFIC INFORMATION
Traffic information
Switching traffic information priority on/off Press TRAFFIC A.
Traffic information priority is activated when TRAFFIC lights up in the display. Note: You will hear a warning beep q if you leave the reception area of the traffic information station you are tuned into. q if you are listening to a cassette tape or a CD, leave the reception area of the traffic information station you are tuned into and the automatic seek tuning function is unable to find another traffic information station. q if you switch from a traffic information station to a station which does not broadcast traffic information. Then either switch off traffic information priority or switch to a different traffic information station. Interrupting a traffic announcement
Adjusting the volume for traffic announcements Press MENU ?.
"MENU" will appear in the display.
Press
or > repeatedly until "TAVOLUME" appears in the display.
Press
> to adjust the traffic announcement volume.
Once you have adjusted the setting, press MENU ? twice.
Press TRAFFIC A during the traffic announcement to interrupt just this traffic announcement. The car audio system will switch back to the previous setting. Traffic information priority will remain effective for further announcements.
36
TAPE DECK OPERATION
Starting tape deck operation
q
Fast forward
If there is no cassette in the tape deck,
Press FF : until it clicks in.
"FORWARD" will appear in the display. Fast rewind
insert a cassette into the tape deck
with the open side facing towards the right. Cassette playback will begin with the side facing upwards. The cassette symbol will light up in the display. q If there already is a cassette inserted into the tape deck,
Press FR 9 until it clicks in.
"REWIND" will appear in the display. Stopping fast forward/rewind
Press the opposite button.
Playback will resume normally. Note: During fast forward/rewind, the radio station you are currently tuned into will play.
Cassette eject Press 7.
The cassette will eject.
Traffic information during cassette playback
If you activate the "TRAFFIC" function (traffic information priority), your car audio system will always be on standby for traffic information. If a traffic announcement is received, cassette playback will be interrupted and you will hear the message. For more information, refer to the section on "Traffic information".
Changing cassette sides To switch from SIDE A to SIDE B
and vice versa, press FR 9 and FF : at the same time. Note: Once the tape reaches the end, it will automatically switch to the other side (autoreverse).
37
PORTUGUÊS
ESPAÑOL
SVENSKA
NEDERLANDS
"CASSETTE" appears in the display. Playback will resume on the side of the tape which was played last.
ITALIANO
press CD·C < repeatedly until
FRANÇAIS
ENGLISH
DEUTSCH
Tape deck operation
Fast forward/rewind
CD CHANGER OPERATION
CD changer operation
The Minnesota DJ30 and the Ontario DJ30 come included with the CDC A 08 CD changer. All of the CD changers listed in the section on "Accessories" can be used in combination with the Augsburg C30, the Boston C30, the Dublin C30 and the Montreux C30. Note: For information on how to handle CDs, how to insert CDs into the changer and how to operate the changer, please refer to the instructions included with the CD changer.
Switching the display mode
To switch the display between the track number and CD number or the track number and elapsed playing time,
press MENU ?.
"MENU" will appear in the display.
Press Press
or > repeatedly until "CDC DISP" appears in the display. or >.
Starting CD changer operation Press CD·C < repeatedly until
"CHANGER" appears in the display. Playback will begin with the first CD the changer detects in the magazine.
The display setting currently selected will appear: "TIME" for the display of the track number and playing time or "CD NO" for the track number and CD number.
Press
or > to make the desired setting.
Once you have made your settings, press MENU ? twice.
Selecting CDs To select a CD up or down in the
magazine, press or > the required number of times.
Repeating individual tracks or entire CDs (REPEAT) To repeat the track currently playing, press 3 (RPT) @ briefly. "RPT TRCK" will appear briefly in the display, RPT will light up in the display.
Selecting tracks To select a different track on the
CD currently playing, press or > the required number of times.
To repeat the entire CD currently
playing, press 3 (RPT) @ again. "RPT DISC" will appear briefly in the display, RPT will light up in the display. Stopping the REPEAT function
Audible fast forward/reverse (CUE/REVIEW)
To start Cue or Review,
To stop the REPEAT function for
the current track or CD, press 3 (RPT) @ repeatedly until "RPT OFF" appears in the display and RPT no longer lights up.
press and hold down either
>.
or
38
CD CHANGER OPERATION
DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH
Playing tracks in random order (MIX) To play the tracks of the currently
selected CD in random order, press 4 (MIX) @ briefly. "MIX CD" will appear briefly in the display, MIX will light up in the display.
Note: It is possible to adjust the scan time from between 5 and 30 seconds in the menu.
Adjusting Scantime Press MENU ?.
"MENU" will appear in the display.
To play the tracks of all of the CDs
in random order, press 4 (MIX) @ again. "MIX ALL" will appear briefly in the display, MIX will light up in the display. Note: The CDC A 08 and the IDC A 09 are also able to play all of the CDs in the changer in random order. The other CD changers first play all of the tracks on a CD in random order and then select the next CD in the changer.
Press
or > repeatedly until "SCANTIME" appears in the display. > to select the desired
Press
scan time.
Once you have made the settings,
press MENU ? twice. Interrupting playback (PAUSE)
Press 2 ( ) @.
"PAUSE" will appear in the display. Stopping PAUSE
Stopping the MIX function To stop the MIX function, press
4 (MIX) @ repeatedly until "MIX OFF" appears briefly in the display and MIX no longer lights up.
Press 2 ( ) @ during the pause.
Playback will resume.
Scanning all of the tracks on all of the CDs (SCAN) To scan all of the tracks on all of
the CDs in ascending order, press 5 (SCAN) @. "SCAN" will appear in the display. Stopping the SCAN function
To stop the SCAN function, press
5 (SCAN) @. The track currently scanned will continue playing. 39
CLOCK
CLOCK
Displaying the clock briefly Press and hold down MENU ( )
? until the time appears in the display.
Once you have selected the mode,
press MENU ?.
Activating the clock for display when the car audio system is switched off
When the car audio system is switched off, but the vehicle ignition is switched on, you can activate the clock display.
Setting the time To set the time, press MENU ?.
"MENU" will appear in the display.
Press
or > repeatedly until "CLOCKSET" appears in the display. >.
Press MENU ?.
"MENU" will appear in the display.
Press
Press
The time will appear in the display. The minutes will flash and can be altered.
or > repeatedly until "CLOCKOFF" or "CLOCK ON" appears in the display.
Press
Press
utes.
or
> to alter the min-
or > to switch the clock display on or off. press MENU ?.
Once you have made the setting, Displaying the time briefly when the car audio system is switched off
To display the time briefly when the car audio system is switched off,
Once you have altered the minutes, press >. The hours will begin to flash.
Press
hours.
or
> to alter the
Once you have made the settings,
press MENU ? twice.
press MENU ( ) ?.
The time will then appear in the display for eight seconds.
Selecting the 12/24-hour time display mode Press MENU ?.
"MENU" will appear in the display.
Press
or > repeatedly until "24 H MODE" or "12 H MODE" appears in the display. or play mode. > to switch the dis-
Press
40
TONE
Adjusting the bass To adjust the bass, press AUDIO
=. "BASS" will appear in the display. Loudness boosts the bass and treble when the volume is low to create a more natural sound.
DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH
Adjusting the tone
Switching Loudness on/off
Press AUDIO (LD) = for more
than two seconds. LD will light up in the display to indicate that Loudness is active. Adjusting Loudness intensity The Loudness boost can be set in stages from one to six.
Press or > to alter the bass. Once you have made the settings,
press AUDIO = twice.
Adjusting the treble To adjust the treble, press AUDIO
= repeatedly until "TREB" appears in the display.
Press MENU ?.
"MENU" will appear in the display.
Press
ble.
or
> to alter the tre-
Press
Once you have made the settings,
press AUDIO =.
or > repeatedly until "LOUDNESS" appears in the display.
or > to alter the Loudness setting. "LOUD 6" is the maximum boost, "LOUD 1" the minimum.
Press
Once you have completed adjusting the settings, press MENU ? twice.
41
BALANCE AND FADER
Adjusting the balance and fader
Adjusting the balance To adjust the balance, press GEO
;. "BAL" will appear in the display.
EXTERNAL AUDIO SOURCES
External audio sources
In stead of the CD changer it is also possible to connect other external audio sources to the line output. These sources can include a portable CD player, MiniDisc player or MP3 player. You must activate the AUX output in the menu. If you would like to connect another external audio source, you will require an adapter cable. This adapter cable can be ordered from any authorized Blaupunkt dealer.
Press
or > to alter the balance right/left. press GEO ; twice.
Once you have made the setting, Adjusting the fader To adjust the fader, press GEO ;
repeatedly until "FADER" appears in the display.
Switching the AUX output on/off Press MENU ?.
"MENU" will appear in the display.
Press
or front/rear.
> to alter the fader
Press
Once you have made the setting,
press GEO ;.
or > repeatedly until "AUX OFF" or "AUX ON" appears in the display. or > to switch AUX on
Press
or off.
Once you have completed your selections, press MENU ?. Note: If the AUX input has been switched ON, you can select it by pressing CD·C <. "AUX" will then appear in the display.
42
SPECIFICATIONS
Amplifier
Output power: 4 x 25 watts RMS acc. to DIN 45 324 at 14.4 V 4 x 40 watts max. power
DEUTSCH
Specifications
Tape deck
Frequency response: 30 - 18000 Hz
Preamp Out
4 channels: 2V
AUX IN
AUX: 2 V / 6 k
Subject to technical modification! 43
PORTUGUÊS
ESPAÑOL
SVENSKA
NEDERLANDS
FM frequency response: 30 - 15000 Hz
ITALIANO
Wavebands: FM : 87.5 - 108 MHz MW : 531 - 1602 kHz LW : 153 - 279 kHz (MW and LW are not available for the Augsburg C30 and the Minnesota DJ30)
FRANÇAIS
Tuner
ENGLISH
Service-Nummern / Service numbers / Numéros du service aprèsvente / Numeri del servizio di assistenza / Servicenummers / Telefonnummer för service / Números de servicio / Número de serviço
Tel.: Deutschland Belgique / België France Nederland Great Britain Ireland Danmark Sverige Norge Suomi Österreich 0 18 05 00 02 25 02.525.54.44 014 010 70 07 023 565 63 48 018 958 383 66 (01) 4149400 44 89 83 60 08 750 15 00 66 81 70 00 094 359 91 01 610 39 0 015 762 241 026 130 04 41 800-266 25 28 006 535 054 47 042 175 873 212 Fax: 0 51 21 49 40 02 02.525.54.48 014 010 73 20 023 565 63 31 018 958 383 94 (01) 4598830 44 89 86 44 08 750 18 10 66 81 71 57 094 359 92 36 01 610 39 391 015 769 473 026 130 05 14 708-681 71 88 006 535 053 12 042 175 873 229
EÏÏ¿~
âeská republika USA Singapore Slovensko
Blaupunkt-Werke GmbH
Bosch Gruppe
06/00 TRO K7/VKD 8 622 402 549