Text preview for : Panasonic SJ-MR200 (MiniDisc) Service Manual.pdf part of Panasonic SJ-MR200 Service Manual Portable MD Recorder - Series mech. RAE1630Z-M - pag. 59
Back to : portable_MD_®_.zip | Home
ORDER No.AD0009165C8
Portable MD Recorder
SJ-MR200
MD unit: RAE1630Z-M Mechanism Series Colour (S)...................Silver Type (W)..................White Type Areas EB...................Great Britain. EG...................Europe. GH...................Hong Kong.
SPECIFICATIONS
Specifications
1
Audio System: Laser: Sampling frequency: Coding: No. of channels: Frequency response: Wow and flutter: General Input terminal OPT/LINE IN jack Impedance: Input level: MIC jack Impedance: Input level: Output terminal Output Jack: Power output: Power supply Rechargeable battery: DC 1.2V (included rechargeable battery) Battery: AC adaptor: Dimensions (WxHxD) Cabinet dimensions: incl.projecting parts: Weight: 78.2x71.6x16.8 mm 79.9x73.6x18.6 mm 120 g (with battery) 94 g (without battery) Play time (When used in hold mode, at 25°C, on a flat, stable surface) Battery type: Rechargeable: Panasonic alkaline: Both together: Charger Input: Recharging time: AC 220 V (GH) / AC220-230 V (EG) / AC 230-240V (EB), 50/60 Hz 8W About 3 hours Play time About 15 hours About 21 hours About 38 hours Record time About 7 hours About 3 hours About 15 hours DC 1.5V (One LR6, AA, UM-3 battery) DC 1.8V (included AC adaptor) Phones, 22 3.5 mW+3.5 mW 600 0.4mV 47k SENS H: 178mV SENS L: 500mV MiniDisc digital audio system Semiconductor laser (=780 nm) 44.1 kHz Adaptive Transform Acoustic Coding (ATRAC) 2 (left and right, stereo) 1 (monaural) 20 Hz-20 kHz (+0 dB, -6dB) Below measurable limit
2
Notes:
- The play time may be less depending on the operating conditions. - Specifications are subject to charge without notice. Weight and dimensions are approximate.
2000 Matsushita Electric Industrial Co., Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law.
1. Accessories
- Rechargeable battery with carrying case .............1pc. (RFKFHFAZ01EM) - External battery case...............................................1pc. (RFA1537-S) - Carrying case.........................................................1pc. (RFC0056-K) - Wired remote control.............................................1pc. (N2QCBD000007) - Stereo earphones..................................................1pc. (RFEV335P-SA) - Connection cable..................................................1pc. (K2KA39B00001)
For EB area
- AC adaptor.............................................................1pc. (RFEA003B-S)
For EG area
- AC adaptor.............................................................1pc. (N0JCAD000001)
For GH area
- AC adaptor.............................................................1pc. (RFEA004H-S)
2. Precation of Laser Diode
3
3. Operating Instructions 4. Handling Precautions for Traverse Deck
The laser diode in the traverse deck (optical pickup) may break down due to potential difference caused by static electricity of clothes or human body. So, be careful of electrostatic breakdown during repair of the traverse deck (optical pickup).
4.1. Handling the traverse deck (optical pickup) 1. The traverse deck (optical pickup) is an extremely high-precision construction and must not be subjected to impact, excessive
4
vibration, or other types of rough handling. 2. In order to prevent static electricity damage to the laser diode, use a short pin or similar tool to short the optical pickup's flexible circuit boards after they have been disconnected from the main circuit board. (as shown in Fig. 1 ) 3. Handle the flexible circuit boards with care; excessive force could cause them to be broken. 4. Do not turn the pre-set variable resistor (for adjustment of the laser power); it has been adjusted at the factory. (as shown in Fig. 2 )
Fig. 1
Fig. 2
4.2. Grounding for electrostatic breakdown prevention 1. Human body grounding Use the anti-static wrist strap to discharge the static electricity from your body. (as shown in Fig. 3 ) 2. Work table grounding Put a conductive material (sheet) or steel sheet on the area where the traverse deck (optical pickup) is placed, and ground the sheet.
5
(as shown in Fig. 4 )
Caution
The static electricity of your clothes will not be grounded through the wrist strap. So, take care not to let your clothes touch the traverse deck (optical pickup).
Fig. 3
Fig. 4
5. Operation Checks and Component Replacement Procedures
- This section describes procedures for checking the operation of the major printed circuit boards and replacing the main components. - For reassembly after operation checks or replacement, reverse the respective procedures. Special reassembly procedures are described only when required. - After replacing the main components (optical pickup or traverse motor, etc.) of mechanism unit block, change to the adjust mode, and then perform the "ROM/RAM auto-adjustment". 5.1. Checking for the main P.C.B.
6
- Check the main P.C.B. (A side) as shown below.
[Checking for the main P.C.B. (B side)]
- Each parts on main P.C.B. (B side) can not be checkesd directly, however, for the checking of main component parts on P.C.B., refer to the "Checking procedures of main components parts on the main P.C.B. (B side).
7
5.2. Replacement for the intermediate cabinet - Follow the (Step 1) - (Step 3) of item 5.1.
5.3. Replacement for the open knob and lock unit - Follow the (Step 1) - (Step 3) of item 5.1.
8
- Follow the (Step 1) - (Step 3) of item 5.2.
5.4. Replacement for the traverse motor - Follow the (Step 1) - (Step 3) of item 5.1.
9
5.5. Replacement for the LCD - Follow the (Step 1) - (Step 3) of item 5.1. - Follow the (Step 1) - (Step 3) of item 5.2.
10
11
5.6. Replacement for the lift motor - Follow the (Step 1) - (Step 3) of item 5.1. - Follow the (Step 1) - (Step 3) of item 5.2. - Follow the (Step 1) of item 5.5.
12
5.7. Replacement for the optical pickup - Follow the (Step 1) - (Step 3) of item 5.1. - Follow the (Step 1) - (Step 3) of item 5.2. - Follow the (Step 1) - (Step 4) of item 5.4. - Follow the (Step 1) of item 5.5.
13
14
15
6. Measurements and Adjsutments
Note: After replacing the main components (optical pickup or traverse motor, etc.) of mechanism unit block, change to the adjust mode, and then perform the "ROM/RAM auto-adjustment".
6.1. Instruments to prepare 1. Playback-only disc (Test disc RFKV0006) 2. Commercially available recordable disc (fully recorded with music) (magneto-optical disc) 3. Laser power meter (LE8010 or compatible meter)
16
4. Remote controller 6.2. Laser power adjustment, Playback-only disc/magneto-optical disc automatic adjustment
6.2.1. Enter the adjustment mode
1. Set the battery and connect the remote controller. 2. Turn off the power, and switch main unit's HOLD switch off. 3. Press the VOL+, VOL-, , and buttons on the remote controller within two seconds. (as shown in Fig. 5 )
Fig. 5
4. When the adjustment mode is activated, " T1 EX " will be displayed on the LCD of remote controller. After " T1 EX " is displayed, select the desired adjustment item with the button or button of the remote controller. (If it is not displayed, perform the procedures written above again.)
Adjustment mode
17
Adjustment mode Laser power adjustment Magneto-optical disc automatic adjustment Playback-only disc automatic adjustment EFM jitter meajurement Record inspection REC jitter meajurement Magneto-optical disc automatic adjustment value check Playback-only disc automatic adjustment value check Error rate measurement (double velocity) AD read result confirmation ROM collection check sum DRAM check Reliability test Tilt measurement (disc middle speed) PWB inspection (audio test)
Display T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF
*In the display of T1 ~ TF shown above, you must adjust T1, T2 and TF. You must perform the adjustment by observing the order T1 T2 T3.
6.2.2. Laser Power Adjustment
Adjust each laser power: read power for reading (play) and write power for writing (record). 6.2.2.1. Set the Unit to the Adjustment Mode Cautions
About handling the optical pickup and the magnetic head. - The optical pickup and the magnetic head are structured precisely; therefore, they are very fragile. Be careful not to touch them with the edge of the laser power meter. Do not touch the lens. - The sensor of the laser power meter is a very fine part. Be careful not to touch it to the optical pickup lens. - Do not loosen or remove the magnetic head installing screw. - The focus point of the laser reaches to 356°F. Therefore, avoid adjusting using laser power for a long time because the sensor of the laser power meter may be burned. - Do not allow the write power to even momentarily reach or exceed 5 mW. Doing so will result in damage to the optical pickup. - Do not set the unit to the laser power adjustment mode with the MD loaded. Doing so may result in damage to the MD. - Laser diode in the optical pickup may be destroyed by the
18
staticelectricity generated in your clothes or body. Be especially careful with the static electricity.
6.2.2.2. Adjustment Procedure
1. Have " T1 EX " indicated on display, and move the optical pickup to the most inside (only when a MD cartridge type laser power meter is used). 2. Uncover the laser power meter. (as shown in Fig. 6 )
Fig. 6
3. Locate the sensor of the laser power meter at a position above the optical pickup (horizontally at a level of the disc position). (as shown in Fig. 7 )
Fig. 7
4. Press the PLAY key of the remote controller (" T1 EX " changes to " LD " of the LCD). 5. Press the key of the remote controller (" LD " changes to " LP " of the LCD). 6. Perform the read power adjustment. Set the light power at 600 ±10% by using VOL+ and VOL- key of the remote controller.
Caution:
W
Proceeding on to the subsequent adjustment procedure with the read power exceeding 600 W±10% will result in damage to the optical pickup. 7. Press the key of the remote controller (" LP " changes to "
19
RLDA " in the LCD). Specified range (read power): 600
W±10% or lower
8. Perfome the light power adjustment. Set the light power at 4.55mW by using VOL+ and VOL- key of the remote controller. If at this time the amperage between TP405 and TP406 (laser current) is 70mA or higher, it is conceivable that theoptical pickup is defective. Specified range (light power): 4.5mW
Caution:
Do not allow the write power to even momentarily reach or exceed 5 mW. Doing so will result in damage to the optical pickup. 9. Press the key of the remote controller (" RLDA " changes to " LP " on the LDC. At this time, the data is written to EEPROM.). 10. Press the PLAY key on the remote controller (" LP " changes to " T1 EX " on the LCD.). 11. Remove the laser power meter. Laser power adjustment is finished.
[REFERENCE] For use of MD cartridge type laser power meter: / We recommend you to use a stick type laser power meter for laser power adjustment of this set. / But if available is a MD cartridge type only, arrange the set as shown in Fig. 9 , and from the state of "6.2.1. Enter the adjustment mode", start the laser power adjustment. / (As for the method of disassembly, refer to "5. Operation checks and main component replacementprocedures".) Fig. 8
6.2.3. Magneto-optical disc automatically adjustment
1. Have " T2 EX " indicated on display, and move the optical pickup to around the center (only when a MD cartridge type laser power meter is used).
20
2. Set the full-recorded magneto-optical disc with the prevention erase situation. 3. Press the PLAY key of the remote controller (" T2 EX " changes to " 1AADJ " on the LCD, adjustment is started.). 4. If it has been finished normally, " 1ADDJ " changes to " 1AOK " on LCD. If it is abnormally, it changes to " 1ANG ". 5. Press the PLAY key (" 1AOK " or " 1ANG " changes to " T2 EX ", magneto-optical disc adjusment is finished.).
Note: If it is displayed " 0ANG ", check the "Troubleshooting Procedures" in the order.
6.2.4. Playback-only disc automatically adjustment
1. Have " T3 EX " indicated on display, and move the optical pickup to around center (only when a MD cartridge type laser power meter is used). 2. Set the playback-only disc. 3. Press the PLAY key of the remote controller (" T1 EX " changes to " 00ADJ " (or " 10ADJ ") on the LCD, adjusment is started.). 4. If it has been finished normally, " 0AADJ " (or " 10ADJ ") changes to " 00OK " (or " 10OK ") on LCD. If it is abnormally, it changes to " 00NG " (or " 10NG "). 5. Press the PLAY key [" 00OK " (or " 10OK ") or " 00NG " (or " 10NG ") changes to " T3 EX ", playback-only discadjustment is finished.]
Note: If it is displayed " 00NG " (or " 10NG "), check the "Troubleshooting Procedures" in the order.
6.2.5. How to get out the adjustment mode
Remove the battery when you finish the adjustment mode.
6.3. Checking the main unit's keys 1. Set the battery and connect the remote controller. 2. Turn off the power. Then, with the main unit's HOLD switch at
21
OFF, press the VOL+, VOL-, , and buttonson the remote controller within two seconds. (as shown in Fig. 5 ) 3. When entering the main unit's key check mode, " KEY EX " will be displayed on the LCD of main unit and " T KEX " will be displayed on the LCD of remote controller. (If it is notdisplayed, perform the procedures written above again.) 4. Confirm the display of LCD by pressing any keys on the main unit. There is no order to press the keys.
Mian unit's keys LCD display positions and letters HOLD OFF REC PAUSE EDIT STOP PLAY 1st. 2nd. letters are AA 3rd. 4th. letters are BB 5th. 6th. letters are CC 7th. 8th. letters are DD 9th. 10th. letters are EE
5. Remote controller's LCD lights " T lights all when you can detect all keys.
" and main unit's LCD
6. Perform below voltage check about the keys come under if you cannot detect the key.
Main unit's keys HOLD REC PAUSE EDIT STOP PLAY Check points IC501 55pin IC501 49pin IC501 3pin IC501 3pin IC501 48pin ON 0V 0V 1.94V 0V 0V OFF 2.4V 2.4V 2.4V 2.4V 2.4V
7. When the keys are ready for detection, press the PLAY key of the remote control. 8. Pressing each key mounted to the main body, make sure of displayed three letters (4th ~ 6th letters) on the right side of the remote control. / Keys to be pressed are not in order. / When the 3 keys apportioned to the respective letters asshown below are all OK, " 0 " is displayed.
22
Display position 4th. letter 5th. letter 6th. letter
Main unit's keys DISPLAY, PLAYMODE, EQ Flat pad lower rank 3 key Flat pad upper rank 3 key
9. Upon detection of all keys, " 000 " is shown on the right side of LCD of the remote control. 10. Perform below voltage check about the keys come under if you cannot detect the key.
Main unit's keys DISPLAY PLAYMODE EQ Flat pad (*1) Check points IC501 3pin IC501 3pin IC501 3pin IC501 6~8pin ON 1.45V 0.44V 1.0V 2.4V OFF 2.4V 2.4V 2.4V 0V
11. Remove the battery when you exit from this mode.
Note: Refer to "Printed Circuit Board and Wiring Connection Diagram" for the test points.
7. Troubleshooting Guide
23
24
25
26
27
28
29
30
31
8. Checking Procedures of Main Components Parts on the Main P.C.B. (B side)
As it cannot meajure the mechanism side of MAIN P.C.B. directly, refer to the table shown below for the criterion in the time of repairing or checking.
32
Circuit No.
Part No.
Function
Symptom
Check point Confirm the voltage of IC403 (pin 14) or (TP137) Confirm the voltage of IC501 (pin 74)
Result and measure If voltage at TP137 normal and voltage IC501 is unusual, IC501 and switch periphery. If voltage at TP137 unusual, replace
IC304C0DBAGZ00006DC-DC Recording is converter / 3.5V impracticable. / Power IC for magnetic head driver control
IC401 C0GBE000003 Optical head lift motor drive
Recording is impracticable. Magnetic head fails to descend.
Confirm the If drive wave normal, check FPC motor drive wave form of TP144 ~ 147 condition of solder around lift motor, (CN402 pins 1 ~ 4) nothing unusual found, replace the motor. If drive wave unusual, check supplyvoltage of and peripheral solder, and if nothing unusual found, replace IC401. Make sure of IC601 (pins 2, 3) input wave form (during MIC/LINE input time). If input wave IC601 is unusual, supply voltage of and peripheral solder, and if nothing unusual found, replace IC701. If input wave IC601 is normal, checkIC601 and perihperal circuit.
IC701 AN7635SH-E1 MIC/LINE AMP
Optical input permits recording, but line input does not. MIC recording is impracticable.
9. Display of Self-Diagnostic Function
This model is equipped with a self-diagnosis function and shows, when necessary, the following indication in the LCD section of the set.
"F17"---This indication appears when the Down switch fails to turn ON since the magnetic head
33
fails to move up/down normally (Due to trouble of the magnetic head or trouble of the magnetic head up/down motor)or the magnetic head P.C.B. is out of position or a foreign matter has mixed in or for some other reason. In such a case, check the peripheral parts of the magnetic head, repair or replace defective parts with normal ones.
10. Schematic Diagram Notes
10.1. Schemtic Diagram Notes
This schematic diagram may be modified at any time with the development of new technology. Notes: : Magnetic head up switch (M.HEAD UP) S1 S501 S502 : PROTECT det. switch S503 : Play / record / pause / operation on / S801 character type button ( , CHARA) : Recording pause / operation on switch S802 (REC ) S803 : Stop / operation off / edit cancel button ( OPR OFF) , : Open det. switch (OPEN ) )
: Hold swithc in "OFF" position. (HOLD
: Play and record mode / character delete S804 button (MODE, DELETE) : Tone / recording sensitivity / space button S805 (EQ / REC SENS, SPACE) : Display, capital / lower case button (DISP, S806 CAPS) : Changing edit mode, changing track mark S807 mode, completing edit button (EDIT, MARK MODE)
- Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance) with the chassis taken as standard. Therefore, there may exist some errors in the voltage values, depending on theinternal impedance of the DC circuit tester.
No mark: MD STOP ( ): MD play [1kHz, L+R, 0dB] Important safety notice:
34
Components identified by mark have special characteristics important for safety. Furthermore, special parts which have purpose of fire-retardant (resistors), high-quality sound (capacitors), low-noise (resistors), etc. are used. When replacing any of components, be sure to use only manufacture's specified parts shown in theparts list. Caution!
IC and LSI are sensitive to static electricity. Secondary trouble can be prevented by taking care during repair. Cover the parts boxes made of plastics with aluminum foil. Ground the soldering iron. Put a conductive mat on the work table. Do not touch the legs of IC or LSI with the fingers directly.
Voltage and signal line : Positive voltage line : Playback signal line : Recording signal "digital" line : Recording signal "analog" line : Mic signal line
10.2. Type Illustration of IC's, Transistors and Diodes
11. Schematic Diagram 12. Printed Circuit Board Diagram 13. Block Diagram 14. Wiring Connection Diagram 15. Terminal Function of IC's
15.1. IC1 (AN8772FHKEBV) : RF AMP
35
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Mark CENVD LDO APCPD LD IN APC REF TEMP IN TEMP ADIP TOFS TBAL TE CRS IN TGAIN LNP AB GAIN FE AS GAIN FBAL AS/ MON3T CEA
I/O Division I O I I I I O O I I O I I O I O I I O I
Function D signal det. capacitor input terminal Laser amp output terminal Photo diode light quantity det. input terminal Laser amp reverse input terminal APC amp reference voltage input terminal Temperature sensor amp input terminal Temperature sensor amp output terminal ADIP signal output terminal Tracking error offset adjustment terminal Tracking ballance adjustment input terminal Tracking error signal output terminal Track cross input terminal Tracking gain adjustment input terminal Lens position signal output terminal APP compensation signal gain adjustment terminal Focus error signal output terminal AS gain adjustment input terminal Focus ballance adjustment input terminal AS/3TMON signal output terminal 3T envelope det. capacitor connection terminal (Connected to power supply through capacitor) BDO/Track cross signal output terminal
21
BDO/ / TRCRS
O
36
Pin No. 22
Mark CBD O
I/O Division O
Function BDO detection capacitor connection terminal (Connected to GND through capacitor) Off track detection signal output terminal GND terminal Off track detection signal input terminal Power supply terminal (+ 3V) NRFDET/off track signal output terminal Serial command latch signal input terminal Serial command data signal input terminal Serial command clock input terminal Standby control signal input terminal EFM signal output terminal RFAGC capacitor connection terminal (Connected to GND through capacitor) EQ input terminal RF amp. output terminal Reference voltage input terminal Reference voltage input terminal RF1 signal input terminal RF2 signal input terminal F1 signal input terminal F2 signal input terminal APP compensation LPF capacitor input terminal RF equalizer adjustment resistor connection terminal (Connected to power supply through resistor)
23 24 25 26 27 28 29 30
OFT O GND OFT IN V CC NRFDET/ / OFTR NRFLD RF DATA RFCK
O -- I I O I I I I O --
31 NRFSTBY 32 33 OUT RF CRF AGC
34 35 36 37 38 39 40 41 42 43
EQ IN ARFO SVREF VREF RF1 RF2 F1 F2 CLPF1 EQADJ
I O I I I I I I I --
37
Pin No.
Mark
I/O Division I
Function Main beam A~D signal input terminal Beam E signal detection capacitor input terminal
44 / A / ~ / D ~ / 47 48 CENVC
I
15.2. IC101 (M66616RB2) : ATRAC ENCORDER/DECORDER, SERVO SIGNAL PROCESSOR
Pin No. 1 2 3 4 5 6 7 8 Mark ADIP LNP FE TE AS DRMONI BAT AMONI I/O Division I I I I I I I -- Function ADIP FM signal input terminal Lens position signal input terminal Focus error signal input terminal Tracking error signal input terminal AS signal input terminal Drive voltage monitor input terminal Battery power supply terminal Servo analog monitor signal output (Not used, open) Reference voltage input terminal Tracking off-set adjustment output terminal Focus balance adjustment output terminal Tracking balance adjustment output terminal TE error gain adjustment output terminal Main beam amp gain adjustment output terminal APP adjustment output terminal Power supply terminal GND terminal
9 10 11 12 13 14 15 16 17
VREFI TOFS FBAL TBAL TGAIN ASGAIN ABGAIN AV DD 1 AV SS 1
I O O O O O O I --
38
Pin No. 18 19 20 21
Mark TRDP TRDM FODP FODM
I/O Division O O O O
Function Tracking drive (+) PWM signal output terminal Tracking drive (-) PWM signal output terminal Focus drive (+) PWM signal ouutput terminal Focus drive (-) PWM signal/ focus, tracking ON/OFF signal output terminal Spindle drive (+) PWM signal output terminal Spindle drive (-) PWM signal output terminal Power supply terminal FG input terminal Stepper drive signal 0 output terminal Stepper drive signal 1 output terminal Power supply terminal for I/ O pad GND terminal DRAM address output terminal (Not used, open) DRAM address output terminal DRAM data input/output terminal DRAM row address strobe output terminal DRAM culum address strobe output terminal DRAM write enable output terminal Reset signal input terminal MSP/MDA,I/F address select input terminal ("H" Address) MSP/MDA,I/F clock input terminal MSP/MDA,I/F write data input terminal
22 23 24 25 26 27 28 29 30 31
SPDP DIR DV DD 0 FG STPO0 STPO1 IV DD 0 DV ss 0 RAD12 RAD11
O O I I O O I -- O O I/O
32 / RAD10 / ~42 ~RAD0 43 / RDT3 / ~ / ~ / RDT0 46 47 48 49 50 51 NRAS NCAS NWE NRST SELAD
O O O I I
52 53
SSCK SSDW
I I
39
Pin No. 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78
Mark SSDR MDISY SCTSY SGSYNC DV DD 1 IV DD 1 DV ss 1 FS384 SCL SWS SDAP SDAR STPI1 STPI2 STPI0 STPO2 RX1 NRECP NREFM REFM MONI3 MONI2 MONI1 MONI0 TS3
I/O Division O O O O I -- -- O O O O I I I I O I I O O O O O O --
Function MSP/MDA,I/F read data output terminal Leader synchronous signal output ADIP synchronous noise output terminal Frame synchronous signal output terminal Power supply terminal Power supply terminal for I/ O pad GND terminal 384 Fs output terminal Bit clock output terminal Word clock output terminal Audio data output terminal Audio data input terminal Stepper status 1 input terminal Stepper status 2 input terminal Stepper status 0 input terminal Stepper drive signal 2 output terminal Digital audio interface signal 1 input terminal Amp. Play/Rec switching signal input terminal EFM modulation inverted output EFM modulation inverted output terminal Monitor signal output (Not used) Monitor signal output (Not used) Monitor signal output (Not used) Monitor signal output (Not used) Not used, connected to GND
40
Pin No. 79 80 81
Mark TS2 TS1 TS0
I/O Division -- -- -- I
Function Not used, connected to GND Not used, connected to GND Not used, connected to GND External system clock input terminal (Not used, connected to GND) Power supply terminal Crystal oscillator input terminal (F=16.9344MHz) Crystal oscillator output terminal (F=16.9344MHz) GND terminal RF serial data output terminal RF serial clock output terminal RF serial load output terminal Track cross input terminal Off-track signal input terminal Laser power PWM output terminal External FM clock input terminal (Not used, connected to GND through registor) EFM loop filter output terminal EFM PLL reference current input terminal EFM PLL filter output terminal EFM signal input terminal Power supply terminal GND terminal Tracking error signal output terminal
82 EXSYSCK
83 84 85 86 87 88 89 90 91 92
DV DD 2 XI XO VDss2 RFDAT RFCK NRFLD TRCRS OFTR APCD
I I O -- O O O I I O I
93 EXEFMCK
94 95
PEFM1 EFMIREF
O I O I I -- --
96 EFMPLLF 97 98 99 100 PEFMS AV DD 0 AVss0 TEFSEL
15.3. IC402 (BD6605KVT) : FOCUS/TRACKING COIL, TRAVERSE
41
MOTOR DRIVE, SPINDLE MOTOR DRIVE, ROTARY DETECTOR
Pin No. 1 Mark SPWIN I/O Division I Function Roter position detect comparater(W) input terminal Spindle motor coil center input terminal Not used, open Charge pump capacitor 1(+) connect terminal Charge pump capacitor 1(-) connect terminal Charge pump capacitor 2(+) connect terminal Charge pump capacitor 2(-) connect terminal Charge pump output terminal Power supply terminal Stepping motor (U) output terminal GND termial Stepping motor (V) output terminal Power supply terminal Stepping motor (W) output terminal GND terminal Step motor coil center input terminal Step detect comparater (W) output terminal Step detect comparater (V) output terminal Step detect comparater (U) output terminal Stepping decorder 3 input terminal Stepping decorder 2 input terminal Stepping decorder 1 input terminal GND terminal
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
SPCOM EXTCLK C1P C1M C2P C2M VG SLVM1 SLUOUT SLPG1 SLVOUT SLVM2 SLWOUT SLPG2 SLCOM BEMFW BEMFV BEMFU S3 S2 S1 SGND
I I -- -- -- -- O I O -- O I O -- I O O O I I I --
42
Pin No. 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
Mark ASGND STHB STALL PW1VM PW1OUT PWPG PW2OUT PW2VM PWIN2 PWIN1 IN 2R IN 2F IN 1R IN 1F H2 PG2 H2 R OUT H2 VM H2 F OUT H2 PG1 H1 PG2 H1 R OUT H1 VM H1 F OUT H1 PG1 CST CSL1 CSL2 FG
I/O Division -- I I I O -- O I I -- I I I I -- O I O -- -- O I O -- -- I
Function GND terminal H1, H2 bridge mute input terminal Standby input terminal Power supply terminal Hlaf bridge 1 output terminal / (Not used, open) GND terminal Half bridge 2 output terminal Power supply terminal Half bridge input terminal GND terminal H bridge 2 reverse input terminal H bridge 2 forward input terminal H bridge 1 reverse input terminal H bridge 1 forward input terminal GND terminal H bridge 2 reverse output terminal Power supply terminal H bridge 2 forward output terminal GND terminal GND terminal H bridge 1 reverse output terminal Power supply terminal H bridge 1 forward output terminal GND terminal Connected to GND through capacitor Slope capacitor connection terminal (Connected to GND through capacitor) Speed pulse output terminal
O
43
Pin No. 52 53 54 55 56 57 58 59 60 61 62 63
Mark BRKBRK+ V CC 2 V CC 1 SP VM1 SP U OUT SP PG1 SP V OUT SP VM2 SP W OUT SP PG2 SP U IN
I/O Division I I I I I O -- O I O -- I
Function Brake comparater- input terminal Brake comparater+ input terminal Power supply terminal Power supply terminal Half bridge 1 input terminal Spindle motor coil (U) output terminal GND terminal Spindle motor coil (V) output terminal Half bridge input terminal Spindle motor coil (W) output terminal GND terminal Roter position detect comparater (U) input terminal Roter position detect comparater (V) input terminal
64
SP V IN
I
15.4. IC501 (MN101C32GAD) : SYSTEM CONTROL
Pin No. 1 2 3 4 5 6 7 8 9 10 11 Mark VREFREM KEY KEY IN1 TEMP BATT1 FP IN1 FP IN2 FP IN3 AN7 VREF+ V DD I/O Division I I I I I I I I -- I I Function Reference voltage input terminal Remote cont. key input terminal Unit key1 input terminal Temperature sensor input terminal Battery voltage det. input terminal Flat pad 1 input terminal Flat pad 2 input terminal Flat pad 3 input terminal Connected to power supply Reference voltage input terminal Power supply terminal
44
Pin No. 12 13 14 15
Mark OSC2 OSC1 VSS XI
I/O Division I O -- I
Function System clock input terminal (f=10.02MHz) System clock output terminal (f=10.02MHz) GND terminal Sub clock input terminal (Not used, connected to GND) Sub clock output terminal (Not used, open) Memory mode select input terminal (Connected to GND) LCD driver data output terminal Link serial input terminal Not used MSP/MDA interface writing data output terminal MSP/MDA interface reading data input terminal MSP/MDA interface data forward clock output terminal Buzzer output trminal Reset signal input terminal MSP/MDA interface address signal output terminal ATRAC contorl output terminal ("H":NORMAL, "L" :HiFi) LCD driver strobe signal output terminal REC sensitivity select output terminal REC amp monaural/stereo select terminal Micro computer wake up signal input terminal Leader synchronize signal from IC101 input terminal
16 17
XO MMOD
O --
18 19 20 21 22 23
REM DATA LINK RXD NC SSDW SSDR SSCLK
O I O O I O
24 25 26
BUZZER RST SELAD
O I O
27
ATRAC CNT LCD STB REC SENSE MONO/ ST WAKEUP MDISY
O
28 29 30 31 32
O O O I I
45
Pin No. 33
Mark SCTSY
I/O Division I
Function ADIP/sub A synchronize signal from IC101 input terminal MDA synchronize signal from IC101 input trminal (11.6ms pulse) Disc cover open/close switch det. input terminal ("H":open, "L":close) LCD driver data output terminal Connected to GND LCD driver clock input terminal Micro computer debug output terminal (Not used, open) Doctor mode input terminal Not used, open Recharging control output terminal Track jump det. output terminal EEPROM chip select output terminal EEPROM clock output terminal EEPROM data output terminal EEPROM data input terminal PLAY/PAUSE KEY input terminal REC/PAUSE KEY input terminal DC IN wake up input terminal Area selection input terminal Magnetic head down input terminal Erase prevention switch input terminal
34
CFSYNC
I
35 OPENSW
I
36 37 38 39
LCD DATA -- LCD CK DEBUG
O -- I O
40 41
DOCTOR NC
O -- O O O O O I I I I I I I
42 CHARGE1 43 44 45 NRECP EEPCS EEPCK
46 EEPDATA0 47 EEPDATAI 48 49 50 51 52 PLAY KEY REC KEY DC IN WAKEUP REG MHEAD UP
53 PROTECT
46
Pin No. 54 55
Mark JITTER OK HOLD SW MIC DET INSEL FPOUT1 / JOGA FPOUT2 / JOGB MIC/LINE LOAD0 LOAD1 HFON1 MUTEA MUTEB
I/O Division I I I I I O O O O O I O O O O O O O O O O O I
Function Connected to power supply through resistor HOLD switch input terminal ("H":OFF, "L":ON) DC IN det. input terminal Mic det. input terminal INPUT select det. input terminal Flat pad A output terminal Flat pad B output terminal MIC/LINE select output terminal Magnetic head movement control 0 output terminal Magnetic head movement control 1 output terminal HF module ON 1 input terminal Analog mute A output terminal Analog mute B output terminal RF amp standby output terminal ADC OFF output terminal VMS select output terminal DE enphasis output terminal DAC off output terminal REC control 2 output terminal RF power supply control output terminal REC control 1 output terminal Power supply control output terminal EL display control input terminal
56 DCINDET 57 58 59 60 61 62 63 64 65 66
67 NRFSTBY 68 ADC OFF 69 70 LOW BST DEO
71 DAC OFF 72 RECCNT2 73 RFCNT
74 RECCNT1 75 76 PWRCNT EL ON
47
Pin No. 77 78 79 80
Mark PC STBY2 NC MSP RST
I/O Division O O -- O
Function 4ch driver standby output terminal FD/TR coil power supply control output terminal Not used, open MSP reset output terminal
16. Caution in Use of Rechargeable Battery Ass'y
- Take Rechargeable Battery Ass'y out of Battery Carrying Case and use it. - Be sure to carry Rechargeable Battery Carrying Case. If not, it may either heat or ignite by shorting with a metal. (as shown in Fig. 9 )
Fig. 9
17. Supply of Rechargeable Battery Ass'y as Replacement Parts
Please take note of the following points relating to Battery Carrying Case to be used for protection of Rechargeable Battery Ass'y from shorting. Replacement Parts:
- Rechargeable Battery Ass'y (RFKFBP140HSY) supplied will be provided with Battery Carrying Case (RFA0475-Q). - No replacement parts will be supplied for Rechargeable Battry Ass'y without Battery Carrying Case. - Replacement parts will be supplied for Battery Carrying Case (RFA0475-Q) without Rechargeable Battery Ass'y. - To your customers, delivery Rechargeable Battery Ass'y together with Battery Carrying Case to prevent shorting accidents that may occur when Rechargeable Battery Ass'y is carried about Battery Carrying Case. (as shown in Fig. 10 )
Fig. 10
48
18. Replacement Parts List
Notes: *Important safety notice: / Components identified by mark have special characteristics important for safety. / Funrthermore, special parts which have purposes of fire-retardant (resistors), high-quality sound (capacitors),low-noise (resistors), etc. are used. / When replacing any of components, be sure to use only manufacture's specified parts shown in the parts list. / *Warning: This product uses a laser diode. Refer to caution statements. *ACHTUNG:Die lasereinheit nicht zerlegen.Die lasereinheit darf nur gegen einc vom hersteller spezifizierte einheit ausgetauscht werden. *Capacity values are in microfarads (uF) unless specified otherwise, P=Pico-farads (pF) F= Farads (F) / *Resistance values are in ohms, unless specified otherwise, 1K=1,000 (OHM), 1M= 1,000K (OHM) *The marking indicates that the Retention Time is limited for this item. After the discontinuation of this assembly in production, the item will continue to be available for a specific period of time. The retentionperiod of availability is dependant on the type of assembly , and in accordance with the laws governing part and product retention. After the end of this period, the assembly will no longer be available. *"" "" marks in Remarks indicate languages of instruction manuals. [:English/Spanish/French/German/Netherlands/Swedish/Italian/Danish, :English/ Chinese]
49
Ref. No. 1 1 2 3 4 5 6 7 8 8 8-1 8-2 9 10 10 10 10-1 11 11-1 12 13 13 14 15 16 17 17-1 17-2 17-3 17-4 17-5 17-6 17-7 17-8 17-9 17-10 17-11 17-12 17-13 17-14 17-15 17-16 17-17 17-18 17-19 17-20 17-21 17-22 17-23 17-24 17-25 17-26 17-27
Part No. RGU1915-S1 RGU1915-D2 RHQ0083-S RJB2280A RMN0613 RMQ0916 RMZ0533 RXM0072 RYF0560-S RYF0560-W RGV0266-S RMA1378 XQN14+B2FC RYK1030A-S RYK1030B-S RYK1030B-W RGV0265-S2 RYK1031-S1 RGV0264-S RHD14076-S RKK0140-S RKK0140-W REJ0150 RMX0186 RHD14067 RAE1630Z-M RDG0481 RHD14078 RHD14080 RHW11011 RMC0409 RXJ0028 BRL1A1CWC BTL2A1CRD RHD14067 RHD14082 RJC99040 RMA1364 RMB0655-2 RMK0463 RMX0156-1 RMX0162 RMZ0535 RXA0183 XQN14+B2FC XQN14+C12FZ BRL1A1CWD RDG0482 RHW06001 RMB0650 RMC0232 RML0586-1 RML0587
Part Name & Description OPERATION BUTTON OPERATION BUTTON SCREW OPERATION FPC LCD HOLDER TAPE INSULATING SHEET LINK UNIT DISC COVER DISC COVER REC KNOB REC LEVER SCREW CABINET ASS'Y CABINET ASS'Y CABINET ASS'Y HOLD KNOB INTERMEDIATE CABINET OPEN KNOB SCREW RECHARGEABLE BATT.COVER RECHARGEABLE BATT.COVER R.BATT.TERMINAL(+) JACK SHEET SCREW MECHANISM UNIT INTERMEDIATE GEAR SCREW SCREW WASHER SPRING DRIVE SHAFT TRAVERSE MOTOR SPRING MOTOR SCREW SCREW R.BATT.TERMINAL(-) HOLDER ANGEL DETECT LEVER SPRING TRAVERSE CHASSIS STOPPER RUBBER SPACER INSULATING SHEET DETECTION LEVER UNIT SCREW SCREW LIFT MOTOR REDUCTION GEAR WASHER EJECT SPRING DRIVE ROD LIFTER LINK
Pcs 1 1 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 6 1 1 1 1 5 1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 4 1 1 1 1 2 1 1 1 1 1 1 1 (S) (W) (S) (W) (S) (W)
Remarks
(EB)(EG) (GH-S) (GH-W)
50
Ref. No. 17-28 17-29 17-30 17-31 17-32 17-33 17-34 18 19 20 A1 A1-1 A2 A3 A4 A4 A4 A5 A5-1 A6 A7 A8 A9 A9 A10 C1 C2,C3 C5,C6 C7 C8 C10 C14 C15 C16 C17 C18 C19-21 C22 C23 C24 C27 C28 C29-32 C33 C34 C35 C36,37 C38 C39 C40 C41 RMM0230
Part No. EJECT ROD A ARM RMQ0958-2 RXG0050 RXK0318 RXM0071 XQN14+A12FC RMX0194 RMX0190 RMG0534-K RMX0187 RFKFHFAZ01EM RFA0475-Q RFA1537-S RFC0056-K N0JCAD000001 RFEA003B-S RFEA004H-S N2QCBD000007 RYQ0312-H RFEV335P-SA K2KA39B00001 RQA0117 RQT5606-E RQT5607-G RQCB0169 ECUE1H221KBQ ECUVNA224KBV RCST0GZ106RG ECUENA104KBQ ECUE1C153KBQ ECUE1H181KBQ ECUVNA224KBV ECUVNJ105KBV ECUE1H181KBQ ECUE1C223KBQ ECUE1H101KBQ ECUE1H102KBQ ECUE1E682KBQ ECUENA393KBQ ECUE1E332KBQ ECUENA104KBQ ECUE1E332KBQ ECUE1H102KBQ ECUVNA224KBV ECUE1C103KBQ ECUE1C123KBQ ECUV1C823KBV ECUENA104KBQ RCST0GZ106RG ECUE1H102KBQ ECUE1C183KBQ
Part Name & Description
Pcs 1 1 1 1 1 2 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 3 1 1 1 1 1 4 1 1 1 2 1 1 1 1 (EG) (EB) (GH)
Remarks
TRANSFER GEAR HOLDER UNIT EJECT ROD B SCREW SHEET SPACER SHEET HOLDER SPACER RECHARGEABLE BATT.ASS'Y RECHARGEABLE BATT.CASE EXTERNAL BATTERY CASE CARRYING CASE AC ADAPTOR AC ADAPTOR AC ADAPTOR WIRED REMOTE CONTROL REMOCON.CLIP STEREO EARPHONES LINE CABLE WARRANTY CARD INSTRUCTION MANUAL INSTRUCTION MANUAL SERVICE CENTER LIST 50V 220P 10V 0.22U 4V 10U 10V 0.1U 16V 0.015U 50V 180P 10V 0.22U 63V 1U 50V 180P 16V 0.022U 50V 100P 50V 1000P 25V 6800P 10V 0.039U 25V 3300P 10V 0.1U 25V 3300P 50V 1000P 10V 0.22U 16V 0.01U 16V 0.012U 16V 0.082U 10V 0.1U 4V 10U 50V 1000P 16V 0.018U
L0BAB0000118 (EB)(EG) (EB)(EG) (GH)
F1G1H221A402 F1H1A224A028 F3E0G106A002 F1G1A104A014 F1G1C153A044 F1H1A224A028 F1H0J105A002 F1G1C223A044 F1G1H102A457 F1G1A393A014 F1G1E3320001 F1G1A104A014 F1G1E3320001 F1G1H102A457 F1H1A224A028 F1G1C1230001 F1G1A104A014 F3E0G106A002 F1G1H102A457
51
Ref. No. C42 C44 C101 C102 C104 C105 C107 C108 C109 C111 C112,13 C115 C116 C117 C118 C201 C202 C203 C204 C205 C206 C207 C208 C209 C210 C211-13 C214,15 C218 C219,20 C221 C301 C303 C305 C306 C307 C308 C309 C310 C312 C313 C315 C316 C317 C318 C401 C402 C403 C404 C405 C407 C408-11 C416-18 C423 C424
Part No. ECUV0J474KBV ECUE1E332KBQ RCST0GZ106RG ECUENA104KBQ ECUE1H102KBQ ECUE1C103KBQ RCST0GZ106RG ECUENA104KBQ RCST0GZ106RG ECUENA104KBQ ECUE1H100DCQ ECUE1C123KBQ ECUE1H221KBQ ECUENA473KBQ ECUENA104KBQ ECUENA104KBQ RCST0GZ475RG ECUVNJ105KBV RCST0GZ475RG RCST0GZ106RG ECUV0J334KBV RCST0GZ475RG ECUV0J334KBV ECUENA104KBQ RCST0GZ106RG ECUENA104KBQ RCST0EX227RE ECUE1H101KBQ ECUE1H102KBQ ECUENA104KBQ RCST0JX107RG RCST0EX227RE RCST0GZ226RG ECUENA104KBQ RCST0EC397RE ECUENA104KBQ ECUE1C103KBQ ECUENA104KBQ ECUENA104KBQ ECUE1C103KBQ ECUENA104KBQ ECUVNJ105KBV ECUVNJ475MBN ECUENA104KBQ ECUVNA224KBV ECUENA473KBQ ECUVNA224KBV ECUVNC104KBV RCST0GZ226RG RCST0GZ106RG ECUENA104KBQ ECUE1H222KBQ RCST0GZ226RG ECUVNJ105KBV 6.3V 0.47U 25V 3300P 4V 10U 10V 0.1U 50V 1000P 16V 0.01U 4V 10U 10V 0.1U 4V 10U 10V 0.1U 50V 10P 16V 0.012U 50V 220P 10V 0.047U 10V 0.1U 10V 0.1U 4V 4.7U 63V 1U 4V 4.7U 4V 10U 16V 0.33U 4V 4.7U 16V 0.33U 10V 0.1U 4V 10U 10V 0.1U 2.5V 220U 50V 100P 50V 1000P 10V 0.1U 6.3V 100U 2.5V 220U 4V 22U 10V 0.1U 2.5V 390U 10V 0.1U 16V 0.01U 10V 0.1U 10V 0.1U 16V 0.01U 10V 0.1U 63V 1U 63V 4.7U 10V 0.1U 10V 0.22U 10V 0.047U 10V 0.22U 16V 0.1U 4V 22U 4V 10U 10V 0.1U 50V 2200P 4V 22U 63V 1U
Part Name & Description
Pcs 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 3 1 1
Remarks F1H0J474A002 F1G1E3320001 F3E0G106A002 F1G1A104A014 F1G1H102A457 F3E0G106A002 F1G1A104A014 F3E0G106A002 F1G1A104A014 F1G1H100A420 F1G1C1230001 F1G1H221A402 F1G1A473A014 F1G1A104A014 F1G1A104A014 F3E0G475A002 F1H0J105A002 F3E0G475A002 F3E0G106A002 F3E0G475A002 F1G1A104A014 F3E0G106A002 F1G1A104A014 F3G0E2270001 F1G1H102A457 F1G1A104A014 F3G0J1070002 F3G0E2270001 F3E0G226A002 F1G1A104A014 F3H0J397A012 F1G1A104A014 F1G1A104A014 F1G1A104A014 F1G1A104A014 F1H0J105A002 F1J0J4750002 F1G1A104A014 F1H1A224A028 F1G1A473A014 F1H1A224A028 F3E0G226A002 F3E0G106A002 F1G1A104A014 F1G1H222A457 F3E0G226A002 F1H0J105A002
52
Ref. No. C425,26 C427 C432-35 C441 C442 C443 C444 C445 C501 C502 C503 C504 C505 C506 C507 C508 C509 C511,12 C516 C601 C606,07 C608 C609 C610 C611 C614,15 C701 C702,03 C704 C705 C706 C707 C708,09 C710,11 C712 C713 C714 C715 C716 C717 C718 C720 C801 C802 C803 CN1 CN2 CN3 CN402 CN403,04 CN701 CP801 CP802
Part No. ECUENC273KBQ ECUV0J334KBV ECUE1C103KBQ RCST0GZ106RG ECUENA104KBQ ECUENA473KBQ ECUENA104KBQ ECUE1H150JCQ ECUE1H101KBQ ECUENA104KBQ ECUE1C103KBQ ECUE1H102KBQ RCST0GZ226RG ECUENA104KBQ ECUE1C103KBQ ECUV0J474KBV ECUE1C103KBQ ECUE1H270JCQ ECUVNJ105KBV ECUE1H470JCQ ECUE1E121KBQ RCST0GZ106RG ECUENA104KBQ RCST0GZ475RG ECUENA104KBQ ECUVNJ105KBV ECUENA104KBQ ECUE1C103KBQ ECUVNA224KBV RCST0GZ106RG ECUVNA224KBV RCST0GZ106RG RCST0GZ335RE ECUVNA224KBV RCST0GZ335RE RCST0GY106RG RCST0GY226RG RCST0GZ226RG ECUENA104KBQ RCST0GZ225RG RCST0GY106RG ECUENA104KBQ ECUENC333KBQ ECUE1E472KBQ ECUE1C103KBQ K1MN26B00047 K1MN06B00069 K1MN04B00034 K1MN10B00064 K1MN04B00034 K1MN13B00043 K1MN13B00042 K1MN07B00049 16V 0.027U 16V 0.33U 16V 0.01U 4V 10U 10V 0.1U 10V 0.047U 10V 0.1U 50V 15P 50V 100P 10V 0.1U 16V 0.01U 50V 1000P 4V 22U 10V 0.1U 16V 0.01U 6.3V 0.47U 16V 0.01U 50V 27P 63V 1U 50V 47P 25V 120P 4V 10U 10V 0.1U 4V 4.7U 10V 0.1U 63V 1U 10V 0.1U 16V 0.01U 10V 0.22U 4V 10U 10V 0.22U 4V 10U 4V 3.3V 10V 0.22U 4V 3.3V 4V 10U 4V 22U 4V 22U 10V 0.1U 4V 2.2U 4V 10U 10V 0.1U 16V 0.033U 25V 4700P 16V 0.01U
Part Name & Description
Pcs 2 1 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 1 1 1 1 2 1 2 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1
Remarks F1G1C273A004
F3E0G106A002 F1G1A104A014 F1G1A473A014 F1G1A104A014
F1G1A104A014 F1G1H102A457 F3E0G226A002 F1G1A104A014 F1H0J474A002 F1G1H270A422 F1H0J105A002 F1G1H470A422 F3E0G106A002 F1G1A104A014 F3E0G475A002 F1G1A104A014 F1H0J105A002 F1G1A104A014 F1H1A224A028 F3E0G106A002 F1H1A224A028 F3E0G106A002 F3E0G335A001 F1H1A224A028 F3E0G335A001 F3F0G1060003 F3F0G2260002 F3E0G226A002 F1G1A104A014 F3E0G225A002 F3F0G1060003 F1G1A104A014 F1G1C333A004 F1G1E4720004
CONNECTOR(26P) CONNECTOR(6P) CONNECTOR(4P) CONNECTOR(10P) CONNECTOR(4P) CONNECTOR(13P) CONNECTOR(13P) CONNECTOR(7P)
53
Ref. No. CP803 D1 D301 D303-05 D401,02 D403,04 D501,02 IC1 IC101 IC102 IC201 IC301 IC302 IC303 IC304 IC401 IC402 IC403 IC404 IC405 IC501 IC502 IC503 IC601 IC701 JK201 JK301 JK701 JK702 L1 L101 L103,04 L201,02 L203 L301 L302 L303 L305 L402 L407 L501 L701-03 L705,06 LCD801 P1 P1 P2
Part No. K1MN05B00042 MA2S111TX MA133TX B0JCMC000006 ZHCS1006TA MA133TX MA741WATX AN8772FHKEBV MN66616RB2 MNA7400CWA1T TA2131FL NJU7015RTE1 C0DBAFZ00016 XC6367A151MR C0DBAGZ00006 C0GBE0000003 BD6605KVT C0JBAB000373 B1MBBDA00002 B1MBBLA00001 MN101C32GAD AK93C45BH-L C0EBC0000032 C0FBZH000011 AN7635SH-E1 K2HC106D0001 RJJ43K10-H RJJ38TW01-H RJJ34R01-1H RLQP100MT-W RLQP100MT-W ERJ8GEY0R00V RLBV601V-W ERJ8GEY0R00V G1A220E00006 G1A100F00002 ELJEA470KF RLM9Z006T-D ERJ8GEY0R00V ELJEA470KF RLQP100MT-W RLBV601V-W J0JAC0000009 L5DCADC00008 RPK1473 RPK1528 RPQ0991
Part Name & Description CONNECTOR(5P) DIODE DIODE DIODE DIODE DIODE DIODE IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC IC JACK,HEADPHONES JACK,DC IN JACK,OPT/LINE IN JACK,MIC COIL COIL COIL COIL COIL COIL COIL COIL COIL COIL COIL COIL COIL COIL LCD PACKING CASE PACKING CASE PAD
Pcs 1 1 1 3 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 3 2 1 1 1 1 (S) (W)
Remarks
MA2S11100L MA3S13300L B0JCLG000001 MA3S13300L MA3J741D0L
C0ABHA000012
C0DBAFZ00012
C1BB00000481
C3EBCG000028
K2EA2B000003 B3MBZ0000002 K2HC103E0012 G1C100M00016 G1C100M00016 J0JCC0000059
G1C100M00016 J0JCC0000059
54
Ref. No. P3 P4 PCB1 PCB2 PCB3 Q1 Q2 Q202 Q203 Q301 Q302 Q303 Q304 Q305 Q306,07 Q308 Q309 Q310 Q311 Q312,13 Q314 Q315 Q401 Q701 Q703 Q705 R1 R2 R5 R10 R11 R14 R15 R16 R18 R20 R21 R22 R23 R24 R25 R29 R30 R32 R34 R35 R107 R108 R110 R111 R113 RPF0257-1 RPQ1004-1
Part No.
Part Name & Description PROTECTION BAG TRANSPORT SPACER REC.HEAD P.C.B. MAIN P.C.B. OPERATION P.C.B. TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR TRANSISTOR 1/4W 4.7K 1/4W 2.7K 1/4W 10K 1/4W 1 1/4W 10K 1/4W 470 1/4W 47K 1/4W 2.2K 1/4W 470K 1/16W 100K 1/4W 22K 1/4W 1K 1/4W 47K 1/16W 2.7K 1/4W 56K 1/4W 33K 1/16W 47K 1/16W 47K 1/4W 22K 1/4W 47K 1/4W 1M 1/4W 22K 1/4W 33K 1/4W 6.8K 1/4W 1K
Pcs 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Remarks
REP3036A-M REP3038B-M REP3039A-S 2SB1295-6-TB 2SB1462STX 2SB1295-6-TB B1ABDF000001 B1ABDF000001 XP151A12A2MR XP4601TX XP161A1355PR XP152A12C0MR XP151A13A0MR 2SB1462STX XP151A13A0MR DTC144TETL 2SD1979TX XP152A12C0MR DTC144EETL XP152A12C0MR DTC144EETL XP4601TX UMG2NTR B1ABDF000001 ERJ2GEJ472X ERJ2GEJ272X ERJ2GEJ103X ERJ2GEJ1R0X EXB24V103JX ERJ2GEJ471X ERJ2GEJ473X ERJ2GEJ222X ERJ2GEJ474X EXB24V104JX ERJ2GEJ223X ERJ2GEJ102X ERJ2GEJ473X EXB24V272JX ERJ2GEJ563X ERJ2GEJ333X EXB24V473JX EXB24V473JX ERJ2GEJ223X ERJ2GEJ473X ERJ2GEJ105X ERJ2GEJ223X ERJ2GEJ333X ERJ2GEJ682X ERJ2GEJ102X
(RTL) (RTL) (RTL) B1ADKB000001 2SB14620SL B1ADKB000001
B1DFBC000002 XP0460100L B1DFDC000003 B1DHAC000002 B1DFBC000003 2SB14620SL B1DFBC000003 B1GBCFNA0001 2SD1979 B1DHAC000002 B1GBCFNN0001 B1DHAC000002 B1GBCFNN0001 XP0460100L B1GFCFNN0010
ERJ2RMJ472X ERJ2RMJ272X ERJ2RMJ103X ERJ2RMJ1R0X ERJ2RMJ471X ERJ2RMJ473X ERJ2RMJ222X ERJ2RMJ474X ERJ2RMJ223X ERJ2RMJ102X ERJ2RMJ473X
ERJ2RMJ333X
ERJ2RMJ223X ERJ2RMJ473X D0GA105JA001 ERJ2RMJ223X ERJ2RMJ333X ERJ2RMJ682X ERJ2RMJ102X
55
Ref. No. R114 R201 R202 R203 R204 R205 R206 R207 R208 R209 R211 R212,13 R301 R302 R303 R304 R305 R306 R308 R309 R310 R311 R312 R313 R314 R315 R316 R317 R318 R320 R321 R322 R323 R324,25 R326 R327 R401 R402 R403 R406 R408 R410 R411 R412 R413 R414 R501 R502 R504 R506 R507 R509 R513 R516
Part No. ERJ2GEJ473X ERJ2GEJ104X ERJ2GEJ221X ERJ2GEJ102X EXB24V225JX ERJ2GEJ222X EXB24V100JX ERJ2GEJ471X ERJ2GED273X EXB28V103JX EXB24V332JX ERJ2GEJ221X EXB24V334JX EXB24V104JX ERJ2RHD223X ERJ2GEJ103X ERJ2GEJ474X ERJ2GEJ103X EXB24V474JX ERJ2GEJ394X ERJ2GED563X ERJ2GED683X ERJ2GED105X EXB24V104JX ERJ2GEJ154X ERJ2GED104X ERJ2GEJ104X ERJ6RSJR10V ERJ2GED105X ERJ2GEJ474X ERJ2GEJ394X ERJ2GEJ225X ERJ2GED105X ERJ2GEJ474X ERJ2GEJ221X ERJ2GEJ474X ERJ2GEJ6R8X ERJ2GEJ103X EXB24V473JX EXB24V473JX ERJ2GEJ472X ERJ2GEJ153X ERJ2GEJ682X ERJ2GEJ182X ERJ2GEJ471X ERJ2GEJ102X ERJ2GEJ473X ERJ2GEJ103X EXB28V334JX ERJ2GEJ103X EXB28V224JX ERJ2GEJ223X EXB28V334JX ERJ2GEJ221X 1/4W 47K 1/4W 100K 1/4W 220 1/4W 1K 1/16W 2.2M 1/4W 2.2K 1/16W 10 1/4W 470 1/4W 27K 1/32W 10K 1/16W 3.3K 1/4W 220 1/16W 330K 1/16W 100K 1/4W 22K 1/4W 10K 1/4W 470K 1/4W 10K 1/16W 470K 1/4W 390K 1/4W 56K 1/4W 68K 1/4W 1M 1/16W 100K 1/4W 150K 1/4W 100K 1/4W 100K 1/10W 0.1 1/4W 1M 1/4W 470K 1/4W 390K 1/4W 2.2M 1/4W 1M 1/4W 470K 1/4W 220 1/4W 470K 1/4W 6.8 1/4W 10K 1/16W 47K 1/16W 47K 1/4W 4.7K 1/4W 15K 1/4W 6.8K 1/4W 1.8K 1/4W 470 1/4W 1K 1/4W 47K 1/4W 10K 1/32W 330K 1/4W 10K 1/32W 220K 1/4W 22K 1/32W 330K 1/4W 220
Part Name & Description
Pcs 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Remarks ERJ2RMJ473X ERJ2RMJ104X ERJ2RMJ221X ERJ2RMJ102X ERJ2RMJ222X ERJ2RMJ471X ERJ2RHD273X
ERJ2RMJ221X
ERJ2RMJ103X ERJ2RMJ474X ERJ2RMJ103X ERJ2RMJ394X ERJ2RHD683X ERJ2RKD105X ERJ2RMJ154X D0HA104ZA002 ERJ2RMJ104X ERJ2RKD105X ERJ2RMJ474X ERJ2RMJ394X ERJ2RMJ225X ERJ2RKD105X ERJ2RMJ474X ERJ2RMJ221X ERJ2RMJ474X ERJ2RMJ103X
ERJ2RMJ472X ERJ2RMJ153X ERJ2RMJ682X ERJ2RMJ182X ERJ2RMJ471X ERJ2RMJ102X ERJ2RMJ473X ERJ2RMJ103X ERJ2RMJ103X ERJ2RMJ223X ERJ2RMJ221X
56
Ref. No. R518 R602 R603 R604 R605 R701 R702 R703 R704 R705 R706 R707 R708 R709 R710 R712 R713 R714 R715 R716 R717 R801 R802 R803 R804 R807 R808 RX103 RX503 S1 S501 S502 S503 S801 S802 S803-07 TH1 TH401 X101 X501 Z301
Part No. EXB28V104JX ERJ2GEJ5R6X EXB24V123JX ERJ2GEJ470X EXB28V470JX ERJ2GEJ102X ERJ2GEJ103X EXB24V104JX EXB24V333JX EXB24V102JX EXB24V471JX ERJ2GEJ394X EXB24V104JX ERJ2GEJ473X ERJ2GEJ470X ERJ2GEJ104X ERJ2GEJ101X ERJ2GEJ473X ERJ2GEJ155X EXB24V103JX EXB24V223JX ERJ3GEYJ222V ERJ3GEYJ472V ERJ3GEYJ822V ERJ3GEYJ273V ERJ2GEJ473X ERJ2GEJ563X ERJ2GEJ103X ERJ2GEJ334X ABC1111P RSH1A039-A K0D112A00114 RSH1A039-A RSG0051-P K0F111A00335 RSG0051-P RRSP33J103CW RRSP33J103CW H0J169500013 H2C100500005 RJH9209-1 1/32W 100K 1/4W 5.6 1/16W 12K 1/4W 47 1/32W 47 1/4W 1K 1/4W 10K 1/16W 100K 1/16W 33K 1/16W 1K 1/16W 470 1/4W 390K 1/16W 100K 1/4W 47K 1/4W 47 1/4W 100K 1/4W 100 1/4W 47K 1/4W 1.5M 1/4W 10K 1/4W 22K 1/16W 2.2K 1/16W 4.7K 1/16W 8.2K 1/16W 27K 1/4W 47K 1/4W 56K 1/4W 10K 1/4W 330K
Part Name & Description
Pcs 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5 1 1 1 1 1
Remarks ERJ2RMJ5R6X ERJ2RMJ470X ERJ2RMJ102X ERJ2RMJ103X
ERJ2RMJ394X ERJ2RMJ473X ERJ2RMJ470X ERJ2RMJ104X ERJ2RMJ101X ERJ2RMJ473X
D0GB472JA002 D0GB822JA002 D0GB273JA002 ERJ2RMJ473X ERJ2RMJ103X ERJ2RMJ334X K0L1BA000050 K0L1BA000037 K0L1BA000037
SW,MAGNETIC HEAD SW,OPEN DET. SW,HOLD SW,PROTECT SW,PLAY/PAUSE,CHARA SW,REC SW,PUSH THERMISTOR THERMISTOR OSCILLATOR OSCILLATOR BATT.CASE CONNECT.TERMINA
D4CC11730001 D4CC11730001
K4BC02E00005
19. Cabinet Parts Location
57
20. Packaging
58
Printed in Japan (H000900000) SW/HH
59