Text preview for : rechargeable_shaver_®_.pdf part of Philips HQ 488/A NiMH Service Manual Rechargeable Shaver (98/07) - pag. 2
Back to : rechargeable_shaver_®_.pd | Home
Rechargeable shaver HQ 488/A NiMH HQ 488/B NiCd
Domestic Appliances and Personal Care
D
R
GENERAL The HQ488 shaver can be recharged in 1 hour by means of a 'Fly Back Self Oscillating Power supply'. This electronic circuit enables the cell to be charged at 100-240 V, 50/60 Hz. It is possible to have a shave directly from the mains. The green LED only illuminates when the shaver is connected to the mains. The electronic circuit incorporates the following functions and controls: - a 1200 mA Quick Charge supply. - a 35 mA Trickle Charge supply. - a 1.25 V / 2.1 A Dynamic supply when shaving from the mains. - an open cell protection (Vbat >1.8V). - a temperature protection of the cell. (if Tcell - Tamb >7C, charging will switch-over from Quick Charge to Trickle Charge). HINTS FOR REPAIRS - Remove the shaving unit, to prevent damages during repairs. - While assembling the shaver the sides panels (item 17) have to be removed. The side panels must be snapped into the body last.
C 100-240 V V R A M
t cell
SK
R
t amb.
TECHNICAL DATA Input voltage Motor voltage Cell Cell capacity Charging system Charge indicator Charging time Charging current Shaving heads Comfort control Screwdriver 100 - 240 V, 50/60 Hz 1.2 V 1x AA NiMH or NiCd approx. 1000 mAH SOPS 1x green LED approx 1H 1200 mA Quick Charge 35 mA Trickle Charge : HQ4 - 4822 690 30468 : 5 settings : 4822 395 50263 : : : : : : : :
MSH CODING 8851 488 00000 HQ 488
Published by Philips Domestic Appliances and Personal Care
Printed in The Netherlands
©
Copyright reserved
Subject to modification
4822 729 22003 98/07
PCS 99 510
HQ 488/A NiMH HQ 488/B NiCd
15 X 7 16 Y
1 2
8
1234 5
9
3 10 4 5 11 Z 17 18 19 20 21 22 12 6
+
A 1.8 x 10/T8
23 24 24+25
1 4822 479 20198 2 4822 321 10095 4822 321 10096 4822 321 10148 4822 321 10344 3 4822 138 10584 4822 138 10633 4 4822 214 12213 4822 214 12214 5 4822 441 12231
cleaning brush flex EU flex GB flex AUS/NZ flex USA/CDN NiMH cell AA NiCd cell AA power supply NiMH power supply NiCd housing PH
6 7 8 9 10 11 12 15 16 17
4822 268 10348 4822 462 10905 4822 441 11957 4822 690 30468 4822 256 10352 4822 442 00855 4822 492 63165 4822 690 10112 4822 442 01515 4822 441 12229
inlet protecting cap adj. head housing HQ4 shaving head head holder cover/hairseal motor clamp trimmer cover side panels
18 19 20 21 22
4822 522 33551 4822 404 40647 4822 441 11526 4822 466 11391 4822 522 33547
gearwheel lever frame sealing plate pinion
23 4822 361 21752 motor 1.2V 24 4822 130 32173 OF217 diode 25 4822 265 10924 connector A 4822 502 30526 s.t. screw 1.8x10/T8
PCS 99 511