Text preview for : cellesse_®_.pdf part of Philips HP 5215 Service Manual Cellesse 8W (01/05) - pag. 3
Back to : cellesse_®_.pdf | Home
Cellesse HP 5215
Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION Type appliance Voltage (mains) : 13 V adapter from mains (AC/DC) : 220-240 V, 50/60 Hz and 110-127 V, 50/60 Hz : DC type : 8 Watts : settings between 80 mbar to 250 mbar : 2 non-driven rollers : 2.5 m : blue haze & light lilac Motor Max. powerconsumption Underpressure Number of rollers Length cord Colours
Product meets the requirements regarding interference suppression on radio and TV.
Published by Philips Domestic Appliances and Personal Care
Printed in the Netherlands
© Copyright reserved
Subject to modification
4322 277 00386 01/05
DISASSEMBLY ADVICE + ASSEMBLY TIPS
To replace: To replace:
PARTS LIST Pos. description 1 Flexible handstrip 2 Upperhousing 3 Adjusitng knob 4 Switch plate 5 Spring switchplate 7 Pump 8 Adjusting unit 9 O - ring 10 Tube (2x) 11 Micro-switch 12 Adapter + switch (11) EURO 220-240 V Universal adapter + switch (11) 110 -127 V Adapter + switch (11) UK 220 -240 V Adapter + switch (11) Brazil Adapter + switch (11) Korea Adapter + switch (11) Argentina Adapter + switch (11) Australia 13 Support 14 Roller rear side (colour blue) 15 Roller front side (colour pink) 16 Lower housing (suction bell) 17 Filter 18 Pouch (Not shown in the exploded view) service code 4203 035 74320 4203 035 74340 4203 035 74440 4203 035 74400 4203 035 74380 4203 035 80560 4203 035 74430 4203 035 74450 4203 035 70460 4203 035 76600 4203 035 74420 4203 035 74790 4203 035 74780 4203 035 74770 4203 035 74800 4203 035 74760 4203 035 74750 4203 035 74390 4203 035 74370 4203 035 74360 4203 035 74330 4203 035 74350 4203 035 74460
SWITCH PLATE (4) SPRING SWITCH PLATE (5) HOLDER PLATE (6) PUMP (7) ADJUSTING UNIT (8) O-RING (9) TUBE (10) MICRO SWITCH (11)
Remove Flexible Hand-strap (1)
ADAPTER (12) SUPPORT (13) ROLLERS (14 + 15) LOWER HOUSING (16)
Remove Flexible Hand-strap (1) Remove Screw cover A 2x Set Adjusting knob (3) to pos. 5
Remove Adjusting knob (3) Remove Upper housing (2) Remove Tube (10) 2x Remove Screw B 4x Remove Support (13)
2 1
Remove Screw cover A 2x Set Adjusting knob (3) to pos. 5
Remove Adjusting knob (3)
3 2 4
1
5
Cleaning and maintenance
Remove Upperhousing (2)
Assembly tips - Adjusting knob (3) ; Before assembling the adjusting knob (3), set the cam of the adjusting unit (8) to the indicated position.
3 2 4
Never immerse the appliance in water or rinse it. For the best results, clean the appliance after every treatment session with a moist cloth and, if necessary, a drop of washing-up liquid. Make sure the filter does not get damp. Do not use alcohol, acetone, benzine, abrasives, scourers etc., to clean the appliance.
Cleaning the rollers To clean the rollers select Level 1. Switch on the product. Wipe the rollers clean with a damp cloth.
3 2 4
1
5
N.B.
1 5
- To avoid dust from getting into the pump, the suction opening has been closed with a plastic cap. Remove the plastic cap before assembling. - After the product has been repaired, it should function properly and has to meet the safety requirements as laid down and officially established at this moment.
Cleaning the hand-strap (1) The hand-strap with claps can be washed in a washing machine at max.40 °C. Washing may slightly change the colour of the strap
EXPLODED VIEW
1
2 3
A A
7
11
10 C 4 8 9 5 13 B
14 15 12
16
Screws A, B and C 3 x 9
17