Text preview for : fryer_©_.pdf part of Philips HD6160/A Service Manual Metal Line Fryer 2200W 02/03 - pag. 2
Back to : fryer_©_.pdf | Home
Metal Line Fryer
Service Service Service
!
Service Information
HD 6160/A
Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION Voltage Frequency Power consumption Coloursetting Contents of oil Basket (mesh) SERVICE INFORMATION Thermal fuse cut-off temp. Oil temperature REPAIR INSTRUCTIONS 1. Front and rear shell of the portable heating unit are held together by means of 4 Torx screws. A suitable screwdriver can be ordered from Customer Service under 4822 395 50145. (this consist of a set of the Torx screwdrivers T6, T7, T8, T9, T10, T15 and T20). : 280°C : 160 - 190°C : : : : : : 220-240 V 50/60 Hz 2200 W coated steel, white 4000 cc 6x6 mm
SAP coding HD 6160
TH. FUSE
L
TH. STAT
SAFETY SW.
PRODUCTS MEETS THE REQUIREMENTS REGARDING INTERFERENCE SUPPRESION ON RADIO AND TELEVISION. - AFTER THE PRODUCT HAS BEEN REPAIRED IT SHOULD FUNCTION PROPERLY AND HAS TO MEET THE SAFETY REQUIREMENTS AS LAID DOWN OFFICIALLY ESTABLISHED AT THIS MOMENT.
Published by Philips Domestic Appliances and Personal Care
Printed in The Netherlands
©
Copyright reserved
Subject to modification
4322 277 00119 02/03
PCS 104 716
HD 6160/A
2 1
3 18
4 21
5 6 12 19
21 20
11
10 8 9 7
13
15 14
16 17
1 2 3 4 5 6 7 8 9 10 11 12 13 21 14 15 16 17 18 19 20 ***
9965 000 01816 9965 000 01817 9965 000 01827 9965 000 01828 9965 000 01829 9965 000 01830 9965 000 01831 9965 000 01832 9965 000 01836 9965 000 01837 9965 000 01838 9965 000 01842 9965 000 01843 9965 000 01844 9965 000 01845 9965 000 01846 9965 000 01849 9965 000 01847 9965 000 01848 4222 001 92051
Holder top cover Top cover Basket Back plastic part Thermostat Capilary fuse on-off switch Knob Microswitch Cover of pilot lamp Front plastic part Pilot lamp with wires not availble Cord set Holder control unit not availble Side holder Foot Handgrip Heating element Holder of bulbs DFU
green white white
orange
white
white green green green
GBR/FRA/ESP
For opening is needed: screwdriver 362/TRT 10x80
PCS 104 716