Text preview for : bulletin_TVP0532_©_.pdf part of Sony KV-36XBR400 Symptom: On limited production, the rear cover is missing a hole for securing a TV stand strap with a screw. The TV still meets the minimum standard for stability even when a
strap is not used - pag. 1
Back to : bulletin_TVP0532_©_.pdf | Home
S
Sony Service Company National Technical Services A Division of Sony Electronics Inc. Park Ridge, New Jersey 07656
CONFIDENTIAL
Service Bulletin TV Products
No.
CSV-1
Model:
KV-36XBR400
532
Subject: Hole For TV Stand Strap Missing From Rear Cover. Symptom: (116B)
Date: April 27, 2001
On limited production, the rear cover is missing a hole for securing a TV stand strap with a screw. The TV still meets the minimum standard for stability even when a strap is not used. If the customer complains that there is no screw hole for securing a TV stand strap, follow the procedure below. 1- Remove the rear cover from the TV. Attempting to add the screw hole to the cover while it is attached to the TV will likely result in internal damage! 2 - Referring to the pictures below, use a 1/8" drill bit (suitable for drilling through plastic) to drill a hole completely through the appropriate area of the rear cover. Be sure to drill the hole straight, not at an angle. Drill from the outside of the cover. Sets possibly affected: serial number range 9068000 - 9081924 Not all sets in this range are missing the screw hole.
Solution:
Drill 1/8" hole here. Reference: SBR0136
Rear cover after 1/8" hole is drilled.
PRINTED IN USA