Text preview for : LG Monitor M4200C_service.pdf part of LG Flatron M4200C Service Manual - Specs - User - RS232
Back to : LG Monitor-TV LCD M4200C | Home
Website:http://biz.LGservice.com E-mail:http://www.LGEservice.com/techsup.html
COLOR MONITOR SERVICE MANUAL
CHASSIS NO. : CL-70
MODEL:
M4200C (M4200C-SAC.AH**T) M4200C (M4200C-SAFC.AH**T) M4200C (M4200C-BAC.AH**T) M4200C (M4200C-BATC.AH**T) M4200C (M4200C-BAPC.AH**T)
( ) **Same model for Service
CAUTION
BEFORE SERVICING THE UNIT, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
CONTENTS
SPECIFICATIONS ................................................... 2 PRECAUTIONS ....................................................... 3 TIMING CHART ....................................................... 8 BLOCK DIAGRAM ..................................................10 DESCRIPTION OF BLOCK DIAGRAM....................11 ADJUSTMENT ...................................................... 12 SERVICE OSD ...................................................... 14 TROUBLESHOOTING GUIDE .............................. 15 WIRING DIAGRAM ............................................... 21 EXPLODED VIEW...................................................22 REPLACEMENT PARTS LIST ...............................24 SCHEMATIC DIAGRAM ......................................... 35
SPECIFICATIONS
1. LCD CHARACTERISTICS Type : TFT Color LCD Module Active Display Area : 42.02inches(1067.308mm)diagonal Pixel Pitch : 0.227mm x 0.681m x RGB Color Depth : 8-bit, 16,777,216 colors Electrical Interface : LVDS Size : 1006mm(H) x 610(V)x59(D)mm Surface Treatment : Anti-Glare, Hard Coating(3H) Operating Mode : Normally Black Backlight Unit : 20-CCFL(20 lamps) 2. OPTICAL CHARACTERISTICS 2-1. Viewing Angle by Contrast Ratio 10 Left : -85° min., -88°(Typ.) Right : +85° min., +88°(Typ.) Top : +85° min., +88°(Typ.) Bottom : -85° min., -88°(Typ.) 2-2. Luminance 2-3. Contrast Ratio : 400(min), 500(Typ.) : 300(min), 400(Typ.) (Without AI) 700(min), 1000(Typ.) (With AI) 4-2. AV 1)Video Level 2)Sync Level 3)Color Burst 4)Audio Level : Input : 0.7 ± 0.15Vp-p : Input : 0.286 ± 0.075Vp-p : Input : 0.214 ± 0.072Vp-p : NTSC Input : 0.40 ± 0.1Vrms PAL Input : 0.5 ± 0.1Vrms PC Input : 0.7 ± 0.1Vrms 5)Video Cross Talk : 43dB
5. POWER SUPPLY 5-1. Power Adaptor Input : AC 100~240V, 50/60Hz , 2.8A 5-2. Power Consumption
MODE POWER ON (NORMAL) STAND-BY SUSPEND DPMS OFF POWER OFF H/V SYNC VIDEO POWER CONSUMPTION LED COLOR ON/ON ACTIVE OFF/ON OFF ON/OFF OFF OFF/OFF OFF less than 260 W less than 4 W less than 4 W less than 4 W less than 2 W GREEN AMBER AMBER AMBER -
3. SIGNAL (Refer to the Timing Chart) 3-1. PC & Video Input 1)Signal Input : S-video,RCA, Component, AV(CVBS) 2)Input Form : D-SUB Analog, DVI, V1(CVBS) Component1(YCbCr),Component2(YPbPr), TV(NTSC) 3)Resolution(max) : Analog - 1600 x 1200@60Hz Digital - 1280 x 1024@60Hz 3-2. Sync Input Horizontal : 30 ~ 83kHz(Digital: 30~72kHz) Vertical : 56 ~ 85Hz Input Form : Separate, TTL, Positive/Negative Digital 4. SPECIAL FUNCTION 4-1. Audio 1)Output Rating: 10W + 10W(Rated Output ± 10%) 2)Freq. Character : 100Hz~10KHz Range(-3dB) 3)T. H. D : Within 10% 4)Input Sensitivity: 0.700Vrms 4-2. Speaker 1)TYPE 2)Impedance 3)Input
6. ENVIRONMENT 6-1. Operating Temperature : 10°C~35°C 6-2. Operating Humidity : 10%~80% 6-3. MTBF : 50,000 HRS with 90% Confidence level Lamp Life : 50,000 Hours (min) 7. DIMENSIONS M4200C-SAC/M4200C-BAC (without Speaker/Stand) Width : 1057mm (41.61'') Depth : 119.1 mm (4.69'') Height : 653 mm (25.71'') M4200C-BAPC (without Stand) Width : 1259mm (49.57'') Depth : 119.1 mm (4.69'') Height : 653 mm (25.71'') M4200C-BATC (without Speaker) Width : 1057 mm (41.61'') Depth : 294.5 mm (11.59'') Height : 702 mm (27.64'') M4200C-SAFC Width Depth Height
: Detachable : 8 : Max : 15W, Normal : 10W
: 1259 mm (49.57'') : 294.5 mm (11.59'') : 702 mm (27.64'')
-2-
8. WEIGHT M4200C-SAC/M4200C-BAC (without Speaker/Stand) Net. Weight : 30.8 kg (67.91 lbs) Gross Weight : 37.3 kg (82.24 lbs) M4200C-BAPC (without Stand) Net. Weight : 33.6 kg (74.09 lbs) Gross Weight : 40.1 kg (88.42 lbs) M4200C-BATC (without Speaker) Net. Weight : 37.2 kg (82.02 lbs) Gross Weight : 43.7 kg (96.36 lbs) M4200C-SAFC Net. Weight Gross Weight
: 40.0 kg (88.20 lbs) : 46.5 kg (102.53 lbs)
-3-
PRECAUTION
WARNING FOR THE SAFETY-RELATED COMPONENT. · There are some special components used in LCD monitor that are important for safety. These parts are marked on the schematic diagram and the replacement parts list. It is essential that these critical parts should be replaced with the manufacturer's specified parts to prevent electric shock, fire or other hazard. · Do not modify original design without obtaining written permission from manufacturer or you will void the original parts and labor guarantee.
WARNING
BE CAREFUL ELECTRIC SHOCK ! · If you want to replace with the new backlight (CCFL) or inverter circuit, must disconnect the AC adapter because high voltage appears at inverter circuit about 650Vrms. · Handle with care wires or connectors of the inverter circuit. If the wires are pressed cause short and may burn or take fire.
TAKE CARE DURING HANDLING THE LCD MODULE WITH BACKLIGHT UNIT. · Must mount the module using mounting holes arranged in four corners. · Do not press on the panel, edge of the frame strongly or electric shock as this will result in damage to the screen. · Do not scratch or press on the panel with any sharp objects, such as pencil or pen as this may result in damage to the panel. · Protect the module from the ESD as it may damage the electronic circuit (C-MOS). · Make certain that treatment person's body are grounded through wrist band. · Do not leave the module in high temperature and in areas of high humidity for a long time. · The module not be exposed to the direct sunlight. · Avoid contact with water as it may a short circuit within the module. · If the surface of panel become dirty, please wipe it off with a softmaterial. (Cleaning with a dirty or rough cloth may damage the panel.)
Leakage Current Hot Check Circuit
AC Volt-meter
To Instrument's exposed METALLIC PARTS
Good Earth Ground such as WATER PIPE, CONDUIT etc.
1.5 Kohm/10W
CAUTION
Please use only a plastic screwdriver to protect yourself from shock hazard during service operation.
-4-
SERVICING PRECAUTIONS
CAUTION: Before servicing receivers covered by this service manual and its supplements and addenda, read and follow the SAFETY PRECAUTIONS on page 3 of this publication. NOTE: If unforeseen circumstances create conflict between the following servicing precautions and any of the safety precautions on page 3 of this publication, always follow the safety precautions. Remember: Safety First. General Servicing Precautions 1. Always unplug the receiver AC power cord from the AC power source before; a. Removing or reinstalling any component, circuit board module or any other receiver assembly. b. Disconnecting or reconnecting any receiver electrical plug or other electrical connection. c. Connecting a test substitute in parallel with an electrolytic capacitor in the receiver. CAUTION: A wrong part substitution or incorrect polarity installation of electrolytic capacitors may result in an explosion hazard. d. Discharging the picture tube anode. 2. Test high voltage only by measuring it with an appropriate high voltage meter or other voltage measuring device (DVM, FETVOM, etc) equipped with a suitable high voltage probe. Do not test high voltage by "drawing an arc". 3. Discharge the picture tube anode only by (a) first connecting one end of an insulated clip lead to the degaussing or kine aquadag grounding system shield at the point where the picture tube socket ground lead is connected, and then (b) touch the other end of the insulated clip lead to the picture tube anode button, using an insulating handle to avoid personal contact with high voltage. 4. Do not spray chemicals on or near this receiver or any of its assemblies. 5. Unless specified otherwise in this service manual, clean electrical contacts only by applying the following mixture to the contacts with a pipe cleaner, cottontipped stick or comparable non-abrasive applicator; 10% (by volume) Acetone and 90% (by volume) isopropyl alcohol (90%-99% strength) CAUTION: This is a flammable mixture. Unless specified otherwise in this service manual, lubrication of contacts in not required. 6. Do not defeat any plug/socket B+ voltage interlocks with which receivers covered by this service manual might be equipped. 7. Do not apply AC power to this instrument and/or any of its electrical assemblies unless all solid-state device heat sinks are correctly installed. 8. Always connect the test receiver ground lead to the receiver chassis ground before connecting the test receiver positive lead. Always remove the test receiver ground lead last. 9. Use with this receiver only the test fixtures specified in this service manual. CAUTION: Do not connect the test fixture ground strap to any heat sink in this receiver. Electrostatically Sensitive (ES) Devices Some semiconductor (solid-state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip" components. The following techniques should be used to help reduce the incidence of component damage caused by static by static electricity. 1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any electrostatic charge on your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging wrist strap device, which should be removed to prevent potential shock reasons prior to applying power to the unit under test. 2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly. 3. Use only a grounded-tip soldering iron to solder or unsolder ES devices. 4. Use only an anti-static type solder removal device. Some solder removal devices not classified as "antistatic" can generate electrical charges sufficient to damage ES devices. 5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices. 6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive material). 7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the chassis or circuit assembly into which the device will be installed. CAUTION: Be sure no power is applied to the chassis or circuit, and observe all other safety precautions. 8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity sufficient to damage an ES device.)
-5-
General Soldering Guidelines 1. Use a grounded-tip, low-wattage soldering iron and appropriate tip size and shape that will maintain tip temperature within the range or 500 to 600 F F. 2. Use an appropriate gauge of RMA resin-core solder composed of 60 parts tin/40 parts lead. 3. Keep the soldering iron tip clean and well tinned. 4. Thoroughly clean the surfaces to be soldered. Use a mall wire-bristle (0.5 inch, or 1.25cm) brush with a metal handle. Do not use freon-propelled spray-on cleaners. 5. Use the following unsoldering technique a. Allow the soldering iron tip to reach normal temperature. (500 to 600 F F) b. Heat the component lead until the solder melts. c. Quickly draw the melted solder with an anti-static, suction-type solder removal device or with solder braid. CAUTION: Work quickly to avoid overheating the circuitboard printed foil. 6. Use the following soldering technique. a. Allow the soldering iron tip to reach a normal temperature (500 to 600 F F) b. First, hold the soldering iron tip and solder the strand against the component lead until the solder melts. c. Quickly move the soldering iron tip to the junction of the component lead and the printed circuit foil, and hold it there only until the solder flows onto and around both the component lead and the foil. CAUTION: Work quickly to avoid overheating the circuit board printed foil. d. Closely inspect the solder area and remove any excess or splashed solder with a small wire-bristle brush. IC Remove/Replacement Some chassis circuit boards have slotted holes (oblong) through which the IC leads are inserted and then bent flat against the circuit foil. When holes are the slotted type, the following technique should be used to remove and replace the IC. When working with boards using the familiar round hole, use the standard technique as outlined in paragraphs 5 and 6 above. Removal 1. Desolder and straighten each IC lead in one operation by gently prying up on the lead with the soldering iron tip as the solder melts. 2. Draw away the melted solder with an anti-static suction-type solder removal device (or with solder braid) before removing the IC.
Replacement 1. Carefully insert the replacement IC in the circuit board. 2. Carefully bend each IC lead against the circuit foil pad and solder it. 3. Clean the soldered areas with a small wire-bristle brush. (It is not necessary to reapply acrylic coating to the areas). "Small-Signal" Discrete Transistor Removal/Replacement 1. Remove the defective transistor by clipping its leads as close as possible to the component body. 2. Bend into a "U" shape the end of each of three leads remaining on the circuit board. 3. Bend into a "U" shape the replacement transistor leads. 4. Connect the replacement transistor leads to the corresponding leads extending from the circuit board and crimp the "U" with long nose pliers to insure metal to metal contact then solder each connection. Power Output, Transistor Device Removal/Replacement 1. Heat and remove all solder from around the transistor leads. 2. Remove the heat sink mounting screw (if so equipped). 3. Carefully remove the transistor from the heat sink of the circuit board. 4. Insert new transistor in the circuit board. 5. Solder each transistor lead, and clip off excess lead. 6. Replace heat sink. Diode Removal/Replacement 1. Remove defective diode by clipping its leads as close as possible to diode body. 2. Bend the two remaining leads perpendicular y to the circuit board. 3. Observing diode polarity, wrap each lead of the new diode around the corresponding lead on the circuit board. 4. Securely crimp each connection and solder it. 5. Inspect (on the circuit board copper side) the solder joints of the two "original" leads. If they are not shiny, reheat them and if necessary, apply additional solder. Fuse and Conventional Resistor Removal/Replacement 1. Clip each fuse or resistor lead at top of the circuit board hollow stake. 2. Securely crimp the leads of replacement component around notch at stake top. 3. Solder the connections. CAUTION: Maintain original spacing between the replaced component and adjacent components and the circuit board to prevent excessive component temperatures.
-6-
Circuit Board Foil Repair Excessive heat applied to the copper foil of any printed circuit board will weaken the adhesive that bonds the foil to the circuit board causing the foil to separate from or "lift-off" the board. The following guidelines and procedures should be followed whenever this condition is encountered. At IC Connections To repair a defective copper pattern at IC connections use the following procedure to install a jumper wire on the copper pattern side of the circuit board. (Use this technique only on IC connections). 1. Carefully remove the damaged copper pattern with a sharp knife. (Remove only as much copper as absolutely necessary). 2. carefully scratch away the solder resist and acrylic coating (if used) from the end of the remaining copper pattern. 3. Bend a small "U" in one end of a small gauge jumper wire and carefully crimp it around the IC pin. Solder the IC connection. 4. Route the jumper wire along the path of the out-away copper pattern and let it overlap the previously scraped end of the good copper pattern. Solder the overlapped area and clip off any excess jumper wire.
At Other Connections Use the following technique to repair the defective copper pattern at connections other than IC Pins. This technique involves the installation of a jumper wire on the component side of the circuit board. 1. Remove the defective copper pattern with a sharp knife. Remove at least 1/4 inch of copper, to ensure that a hazardous condition will not exist if the jumper wire opens. 2. Trace along the copper pattern from both sides of the pattern break and locate the nearest component that is directly connected to the affected copper pattern. 3. Connect insulated 20-gauge jumper wire from the lead of the nearest component on one side of the pattern break to the lead of the nearest component on the other side. Carefully crimp and solder the connections. CAUTION: Be sure the insulated jumper wire is dressed so the it does not touch components or sharp edges.
-7-
TIMING CHART
VIDEO
B A
C
E D F
SYNC
<< Dot Clock (MHz), Horizontal Frequency (kHz), Vertical Frequency (Hz), Horizontal etc... (µs), Vertical etc... (ms) >> 1) PC Mode
MODE
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
H/V H(Pixels) V(Lines) H(Pixels) V(Lines) H(Pixels) V(Lines) H(Pixels) V(Lines) H(Pixels) V(Lines) H(Pixels) V(Lines) H(Pixels) V(Lines) H(Pixels) V(Lines) H(Pixels) V(Lines) H(Pixels) V(Lines) H(Pixels) V(Lines) H(Pixels) V(Lines) H(Pixels) V(Lines) H(Pixels) V(Lines) H(Pixels) V(Lines) H(Pixels) V(Lines) H(Pixels) V(Lines)
Sync Polarity + + + + + + + + +/+/+ + + + + + + + + + + +
Dot Clock 25.175 28.321 25.175 31.5 36.0 40.0 49.5 56.25 57.283 65.0 78.75 94.5 74.5 84.75 108.0 135.00 162.00
Frequency 31.469 70.8 31.468 70.8 31.469 59.94 37.5 75 43.269 85.0 37.879 60.317 46.875 75.0 53.674 85.061 49.725 74.55 48.363 60.0 60.123 75.029 68.68 85.00 44.772 59.855 47.72 59.799 63.981 60.02 79.98 75.02 75.00 60
Total Period (E) 800 449 900 449 800 525 840 500 832 509 1056 628 1056 625 1048 631 1152 667 1344 806 1312 800 1376 808 1664 748 1776 798 1688 1066 1688 1066 2160 1250
Video Active Time ( A )
640 350 720 400 640 480 640 480 640 480 800 600 800 600 800 600 832 624 1024 768 1024 768 1024 768 1280 720 1360 768 1280 1024 1280 1024 1600 1200
Front Porch (C) 16 37 18 12 16 10 16 1 56 1 40 1 16 1 32 1 32 1 24 3 16 1 48 1 64 3 72 3 48 1 16 1 90 1
Sync Duration (D) 96 2 108 2 96 2 64 3 56 3 128 4 80 3 64 3 64 3 136 6 96 3 96 3 128 5 136 5 112 3 144 3 30 3
Back Porch (F) 48 60 54 35 48 33 120 16 80 25 88 23 160 21 152 27 224 39 160 29 176 28 208 36 192 20 208 22 248 38 248 38 88 46
Resolution 640 x 350 720 X 400 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 1280 x 720 1360 x 768 1280 x 1024 1280 x 1024 1600 x 1200
1~17 : D-SUB, 1~16 : DVI-D: 1~15
-8-
2) Component Video Mode(Y/Pb/Pr)
MODE
1 2 3 4 5
H/V H(Pixels) V(Lines) H(Pixels) V(Lines) H(Pixels) V(Lines) H(Pixels) V(Lines) H(Pixels) V(Lines)
Sync Polarity -
Dot Clock 25.175 27.027 74.176 74.250 74.176
Frequency 31.469 59.94 31.5 60 44.955 59.94 33.750 60.053 33.716 59.994
Total Period (E) 800 525 858 525 1650 750 2200 562 2200 562
Video Active Time ( A )
640 480 720 480 1280 720 1920 540 1920 540
Front Porch (C) 16 10 16 10 70 5 44 2 44 2
Sync Duration (D) 96 2 62 2 40 5 44 5 44 5
Back Porch (F) 48 33 60 33 260 60 192 15 192 15
Resolution SDTV 480P HDTV 720P (HDCP) HDTV 720P (HDCP) HDTV 1080I (HDCP) HDTV 1080I (HDCP)
-9-
Inverter Assy LCD Module FAN Assy (42 )
Speaker Assy
12P Wafer
30P Wafer
12P Wafer 4P Wafer
24V (K4S643232) SDRAM (U902)
3.3V
Regulator Power FET Block (LM35DT) (U523)
2.5V/3.3V SCL2/SDA2 18V
Temp Sensor Amp (U502)
Left (TPA 3004)
Right
1.5V/1.8V/2.5V/3.3V/5V/ 12V/18V (MDIN150L) De-interlace (U901) PC Audio DTV Audio (Comp1) DVD Audio (Comp2)
SCL/SDA
Power Assy Left LVD S
H/V/CLK SCL2/SDA2
15P Wafer LVD S
H/V/CLK
(HY5DU283222AQ)
Right
5V/8V
2.5V
128Mb DDR FRC Memory (U401)
(MSP3420G) Audio Decoder (U501)
SCL/SDA
1.8V 2.5V 3.3V
4:2:2 (16bit)
SCL2/SDA2
CVBS Audio (UPD64012) Video Decoder (U801) (K4S161622)
3.3V
BLOCK DIAGRAM(uPD64011+gm1501H)
- 10 4:2:2 (16bit) (M29W800DT)
3.3V
(gm1501H-CF-LF) 4:2:2 (16bit) 4:2:2 (16bit)
1.5V/3.3V 3.3V
Video Signal P rocessor (U402)
SDRAM (U802)
5P Wafer
Control Assy ADC (MST9883C) ADC (U303)
SCL/SDA
Logo LED Assy
10P Wafer 8Mb Flash Memory (U403) RGB (SOG) (AD8009) HD-YPbP r (480 i ~ 1080i) PC Audio
SCL SDA H/V (BA7657F)
TMDS
(CXA2040AQ) C OUT Y OUT CVBS OUT YCbCr (480i/576i) Component Audio CVBS IN CVBS OUT S/W (U201) Y/C
9V SCL/SDA
SCL SDA
9P Wafer Signal Selector (U121) Low Distortion Amp
SCL SDA H/V
RS232 In/Out RGB (SOG) RGB (SOG)
SCL SDA H/V
TMDS
SCL SDA H/V
Comp1
Comp2
CVBS Audio
DVI
RGB1 RGB2 RGB Out
PC Sound
Component1 In Component2 In
Component1(2) Sound
CVBS In CVBS Out
S-VIDEO
DESCRIPTION OF BLOCK DIAGRAM
1. INPUT SELECTION CIRCUIT
1) D-SUB RGB INPUT SELECT : This section is composed of Signal selector IC(BA7657F_U121) and peripheral devices. The BA7657F(U121) IC select RGB1 signal or RGB2 signal and the signal is sent to gm1501H (U402). 2) VIDEO INPUT SELECT : This section is composed of Video switching IC(CXA2040AQ_U201) and peripheral devices. Video switching IC(CXA2040AQ_U201) select CVBS video or S-video and the signal is sent to Video decoder (UPD64012) 3) DVI signal input is directly fed to SCALER, DTV(Component1) signal input is given to Scaler IC(U402) via MST9883C(U303). DVD(Component2) signal input is given to Scaler IC via Video Decoder IC(UPD64012_U801).
5. AUDIO DECODER
This section is composed of MSP3420G(U501) and peripheral devices. gm1501H(U402) is controlling MSP3420G through IIC Line. This IC is processing audio signal output of A/V Jack, PC Audio Jack. This IC's output signal is sent to Audio Amplifier IC (TPA3004_U502).
6. AUDIO AMPLIFIER
This section is composed of TPA3004(U502) OR TPA3001(U507) and peripheral devices. Audio Amplifier's function is amplification of sound signal received from Audio Decoder. Input Audio signal is amplified according to the DC Volume control curve.
7. VIDEO SIGNAL PROCESSOR (FORMAT CONVERTER) 2. DDC COTROLLER
This section is composed gm1501H(U402),EEPROM IC (U404, U115, U120) and peripheral devices. gm1501H(U402) is controlling peripheral devices through IIC Line. Major functions of this block are : (1) Controlling of u-COM and Flash memory through DDC-SCLA, DDC-SDAA of D-sub connector. (2) Storage of EDID DATA in the EEPROM(U115, U120). This section is composed of gm1501H(U402) and peripheral devices. gm1501H(SCALER_U402) have in built u-COM in IC. (1) This IC include A/D Converter, Pre-Amp, PLL Circuit. (2) This IC include TMDS Receiver and LVDS Transmitter. TMDS Receiver is decoding input DVI Signal and LVDS Transmitter is encoding the output Signal . also, gm1501H have Format Converter (Scaling) function. This IC convert Various sized Digital signal to LCD Module's resolution (WXGA).
3. ANALOG DIGITAL CONVERTER
This section is composed of MST9883C(U303) and peripheral devices. gm1501H(U402) is controlling MST9883C through IIC Line. This IC is converting DTV(YPbPr) signal in to 16 bit Interlace signal and the signal is sent to De-interlace IC(MDIN150L_U901) This output signal have CONTRAST, BRIHTNESS, SHARPNESS, COLOR, TINT information.
8. DC/DC COVERTER
DC/DC Converters change Power output voltage (DC 5V, 12V, 24V) to 1.5V, 2.5V, 3.3V, 5V, 8V, 9V. (To be used by different IC on the main board.)
9. TEMPERATURE SENSING AND FAN CONTROL
This section is composed of LM35DT(U523), KIA358F(U524) and peripheral devices. The temperature at surface of LM35DT(U523) is sensed and converted to HEX code by KIA358(U524). gm1501H(U402) receives sensing HEX values from KIA358F(U524)and control FAN(42INCH ONLY).
3. VIDEO DECODER
This section is composed of UPD64012(U801) and peripheral devices. gm1501H(U402) is controlling UPD64012 through IIC Line. This IC is controlling CVBS input signal, S-VIDEO(Y/C) input signal and DVD(YCbCr) input signal. and converting input signals in to 16 bit interlace signal and the signal is sent to De-interlace IC(U901). This output signal have CONTRAST, BRIHTNESS, SHARPNESS, COLOR, TINT information.
10. POWER SUPPLY BLOCK
Power supply receives AC voltage (100-240 V, 50/60 Hz,) and converts to System voltage that are 5V, 12V, 18V and 24V DC voltage. These voltages supports main board, inverter board and module;s T-con board. This Circuit contains PFC(Power Factor Correction) circuit. The Minimum Power efficiency is about 75%.
4. DE-INTERLACER
This section is composed of MDIN150L(U901) and peripheral devices. gm1501H(U402) is controlling MDIN150L through IIC Line. This IC is converting 16bit interlace input signal in to 16bit De-interlace signal and the signal is sent to Video Signal Processor IC(gm1501H_U402).Ä
- 11 -
ADJUSTMENT
All adjustment are thoroughly checked and corrected when the monitor leaves the factory, but sometimes several minor adjustment may be required. Adjustment should be following procedure and after warming up for a minimum of 30 minutes. · Alignment appliances and tools. - IBM compatible PC - Programmable Signal Generator. (eg. VG-819 made by Astrodesign Co.) - Oscilloscope. - White Balance Meter. (CA-110) 1. DDC Data Write Procedure-Analog 1) Use this procedure only when there is some problem on Analog EDID data. 2) Run alignment program for M4200C on the IBM compatible PC. 3) Select EEPROM Analog EDID write command and Enter. 4) This will write the Analog EDID data to EEPROM. 2. DDC Data Write Procedure-Digital 1) Use this procedure only when there is some problem on Digital EDID data. 2) Run alignment program for M4200C on the IBM compatible PC. 3) Select EEPROM Digital EDID write command and Enter. 4) This will write the Digital EDID data to EEPROM.
A
RS-232C
EXT.
IBM Compatible PC
9 15 10 5 11 6 1 5
6 1
C
13 1 14 25
tu
se d
Parallel Port
RS 23 2C
No
EL
5V
OFF
ON
Control Line
PA RA
C
F
Power inlet (required)
220
LL
5V ON 4.7K 4.7K 4.7K 74LS06 74LS06
VG
PO
S MO NI
A
CS T
Power Select Switch (110V/220V) Power LED
WE R
5V
E
OFF
R
V-S
TO
YN
B
E ST Switch
B
F V-Sync On/Off Switch (Switch must be ON.)
Figure 1. Cable Connection
- 12 -
Windows EDID V1.0 User Manual Operating System: MS Windows 98, 2000, XP Port Setup: Windows 98 => Don't need setup Windows 2000, XP => Need to Port Setup. This program is available to LCD Monitor only. 1. Port Setup a) Copy "UserPort.sys" file to "c:\WINNT\system32\drivers" folder b) Run Userport.exe
2. EDID Read & Write 1) Run WinEDID.exe
2) Edit Week of Manufacture, Year of Manufacture, Serial Number a) Input User Info Data b) Click "Update" button c) Click " Write" button
c) Remove all default number d) Add 300-3FF
e) Click Start button. f) Click Exit button.
- 13 -
SERVICE OSD
SEREVICE MENU
Engaging the `in-start' key of the remote control lets you into the Service Menu Description of operation
- Elapsed time : Time used for back light - Nvram Initial : EEPROM reset - RS232 Speed : Baud Speed - WB Adjust : Adjusts the white balance - Aging Mode : Sets the aging mode - Model Select : Sets the model name - TV <-> AV : Sets the TV or AV only Model - Country Option : Chooses a country
Model : M4200C Elapsed Time NVram Inatial RS232 Speed WB Adjust Aging Mode Model Select TV <-> AV Contry Option
V1.0 17H OFF 115.2K 0 OFF M4200C AV USA
Caution
- To use the functions of the existing Special Menu, use Power Off/On.
SEREVICE MENU
Description of operation
- Resolution : Adjusts the picture resolution - AI : Function built in panel - Hotel Mode : Function for a Hotel system manager - SVC Display : Adjusts the service screen quality - Video H Position : Adjusts Video H position - Video V Position : Adjusts Video V position - RS232 Select : Adjusts RS232 comunication type.
Model : Elapsed Time Resolution AI Hotel Mode SVC Display Video H Position Video V Position RS232 Select 17H Auto OFF SET SET 50 50 Normal
LG Hotel Mode Set Up
The OSD is displayed when Audio Key is pressed on Nvram Initial in Service Menu.
YES YES 100 YES YES YES YES YES On 30 On 1 YES YES
Channel Change Input Mode Change Volume Limit Fixed Volume OSD Display Remocon Operation Local Key Operation On Monitor Operation Volume Channel Channel Menu Display Auto Off Operation
Purpose
- Function : The setting can be adjusted when the unit is being used in a hotel. Description of operation - Channel Change : Enables (Yes)/Disables (No) channel change in the TV source mode. - Input Source Change : Enables (Yes)/Disables (No) input source change. - Volume Limit : Sets the maximum volume within the range of 0 ~ 100 when volume control is allowed. - Fixed Volume : Sets Yes (Fixed)/No (Variable) about whether the sound volume will be fixed to the current value or not. - OSD Display : Sets whether the OSD will be displayed (Yes) or not (No). - Remote Control Operation : Activates (Yes)/Deactivates (No) remote control operation. - Local Key Operation : Activates (Yes)/Deactivates (No) local key operation. - On Monitor Operation : Sets Yes (Operation)/No (No operation) about whether the channel and the volume level that will be displayed when the power is turned on. - Channel : Sets Yes (Operation)/No (No operation) about whether the preset channel will be selected or the one memorized last will be selected when the power is turned on. On (Activated) or Off (Deactivated) can be selected. - Channel Menu Display: Enables (Yes)/Disables (No) entry into the Channel menu on the main OSD. - Auto Off Operation : Sets whether the automatic turn-off function will be activated or not with On (Activated) or Off (Deactivated) option, which turns off the TV if no key input is made for 2 hours, using Auto Off operation and On Time on the Time menu.
- 14 -
TROUBLESHOOTING GUIDE
1. NO POWER
NO POWER (POWER INDICATOR OFF)
CHECK J601 VOLTAGE (18V, 12V, 5V)? YES
NO CHECK POWER BOARD
CHECK J603 VOLTAGE (12V, 24V) ? YES
NO
CHECK POWER BOARD
CHECK X401 (14.318MHz) ?
NO CHECK X401
YES
CHECK J601 (SUB POWER) ?
NO
CHECK MICOM(U402) SUB POWER PORT
YES
1. KEY PART IC CHECK (U401, U402,U403) 2. CHECK KEY CONTROL BOARD
- 15 -
2. NO RASTER(OSD IS NOT DISPLAYED)
NO RASTER (OSD IS NOT DISPLAY)
CHECK U402 OUTPUT WAVE?
NO
CHECK THE PERIPHERAL IC U402
YES
CHECK INVERTER VOLTAGE ( 12V,24V)?
NO
CHECK WAFER AND POWER BOARD
YES
CHECK MODULE INPUT WAVE?
NO
CHECK MODULE LINK CABLE
YES
1. CHECK INVERTER 2. CHECK T-CON BOARD
- 16 -
3. NO RASTER STATE ON VIDEO SIGNAL
NO RASTER STATE ON VIDEO SIGNAL
REMARK : POWER CHECK POWER CHECK OF CXA2040 (U201) : U204(9V) POWER CHECK OF UPD64012 (U801) : U803(3.3V), U804(1.5V) POWER CHECK OF MST9883C (U303) : U304(3.3V) POWER CHECK OF MDIN150L (U901) : U907(3.3V), U908(2.5V) POWER CHECK OF GM1501H (U402)
YES NO RASTER IS COMPONENT1 NO
CHECK THE PERIPHERAL IC U303 AND COMPONENT1 CABLE
CHECK CABLE OF VIDEO AND COMP2 NO
CHECK CXA2040(U201) I/O SIGNAL? NO PROBLEM
NO IN / OUTPUT SIGNAL
CHECK THE PERIPHERAL CX2040(U201)
CHECK UPD64012(U801) I/O SIGNAL? NO PROBLEM
NO IN / OUTPUT SIGNAL
CHECK THE PERIPHERAL UPD 64012(U801)
CHECK MDIN150L(U901) I/O SIGNAL? NO PROBLEM
NO IN / OUTPUT SIGNAL
CHECK THE PERIPHERAL MDIN150L(U901)
CHECK gm1501H(U402) I/O SIGNAL?
NO IN / OUTPUT SIGNAL
CHECK THE PERIPHERAL gm1501H(U402) AND SDRAM(U401)
- 17 -
4. NO RASTER STATE ON RGB SIGNAL
NO RASTER STATE ON RGB SIGNAL
REMARK : POWER CHECK POWER CHECK OF BA7657F (U121) : 5VP POWER CHECK OF SCHMITT TRIGGER (U123, U124) : 5VP POWER CHECK OF MC14066B (U122) : 5VP POWER CHECK OF GM1501H (U402)
INPUT WAFER CHECK (J101)
CHECK BA7657F(U121) I/O SIGNAL? NO PROBLEM
NO IN / OUTPUT SIGNAL
CHECK THE PERIPHERAL BA7657F(U121)
CHECK BA7657F(U121) I/O SYNC? NO PROBLEM
NO IN / OUTPUT SIGNAL
CHECK THE PERIPHERAL SCHMITT TRIGGER (U123,U124)
CHECK gm1501H(U402) I/O SIGNAL? NO PROBLEM
NO IN / OUTPUT SIGNAL
CHECK THE PERIPHERAL gm1501H(U402) AND SDRAM(U401)
CHECK THE MODULE CHECK THE INVERTER
- 18 -
5. NO RASTER STATE ON DVI SIGNAL
NO RASTER STATE ON DVI SIGNAL
REMARK : POWER CHECK POWER CHECK OF GM1501H (U402)
INPUT WAFER CHECK (J102)
CHECK gm1501H(U402) I/O SIGNAL? NO PROBLEM
NO IN / OUTPUT SIGNAL
CHECK THE PERIPHERAL gm1501H(U402) AND SDRAM(U401)
CHECK THE MODULE CHECK THE INVERTER
- 19 -
6. SOUND TROUBLE SHOOTING
REMARK : POWER CHECK POWER CHECK OF MSP3420G (U501) : U522(8V), L502(8V), L501(5V), L505(5V) POWER CHECK OF TPA3004 (U502) : 18V
CHECK SOUND OF VCR,DVD,PC,SETOP BOX...
CHECK gMSP3420G(U501) I/O SIGNAL? NO PROBLEM
NO IN / OUTPUT SIGNAL
CHECK SOUND INPUT = PC (J707) = DTV / DVD (J702) = VIDEO (SVBS, S-VIDEO) (J701) CHECK THE PERIPHERAL MSP3420G (U501)
CHECK TPA3004(U502) I/O SIGNAL? NO PROBLEM
NO IN / OUTPUT SIGNAL
CHECK THE PERIPHERAL TPA3004 (U502)
1. CHECK OUTPUT WAFER(J501) 2. CHECK CONNECTOR CABLE 3. CHECK SPEAKER
- 20 -
Connector Ass'y P/N: 6631T12006P
J501 J1001
Connector Ass'y P/N: 6631T25019G Connector Ass'y P/N: 6631T11020M
J802(30Pin) to Module Link
J610
WIRING DIAGRAM
Connector Ass'y P/N: 6631T20029M
Connector Ass'y P/N: 6631T20032H
J605 J604
12P
MAIN
4P
J603
J601
J502
J402
15P
15P
12P
POWER
9P
Connector Ass'y P/N: 6631T20029C Connector Ass'y P/N: 6631T20034J
10P
- 21 -
CONTROL
LED
EXPLODED VIEW
*
210 230 250
220
240
010 020 130 070 090 100 180 170 190 140 080
030
110
- 22 120 200 160 120 150 130
060
050
040
EXPLODED VIEW PARTS LIST
Ref. No.
010
Part No.
3091TKE029L 3091TKE029N 3091TKE029M 3091TKE029K
Description
CABINET ASSEMBLY, L4200TC BRAND 3090TKE005A AV ONLY-SILVER-M4200C-SAFC CABINET ASSEMBLY, L4200TC BRAND 3090TKE005A AV ONLY-SILVER-C/SKD-M4200C-SAC/SAFC CABINET ASSEMBLY, L4200TC BRAND 3090TKE005A AV ONLY-BLACK-C/SKD-M4200C-BAC CABINET ASSEMBLY, L4200TC BRAND 3090TKE005A AV ONLY-BLACK-M4200C-BATC/BAPC LCD(LIQUID CRYSTAL DISPLAY), LC420W02-B4K4 LG PHILPS TFT COLOR B4K3 REV. LCD(LIQUID CRYSTAL DISPLAY), LC420W02-B6 LG PHILPS TFT COLOR MINI LVDS, P6 BACK COVER ASSEMBLY, L4200TC 3808TKE004A BACK COVER SPRAYED COMMERCIAL-CKD-M4200C-SAC/SAFC/BAC BACK COVER ASSEMBLY, L4200TC 3808TKE004A BACK COVER SPRAYED COMMERCIAL,EXPORT- M4200C-BATC/BAPC TILT SWIVEL ASSEMBLY, L4200TC (SILVER TOP) 4950TKK758A STAND BODY/REAR COLOR : PEARL BLACK-M4200C-SAFC TILT SWIVEL ASSEMBLY, L4200TC (SILVER TOP, C/SKD) 4950TKK758A STAND BODY/REAR COLOR : PEARL BLACK-Only M4200C-SAFC TILT SWIVEL ASSEMBLY, L4200TC 4950TKK758A PEARL BLACK,BK TOP-Only M4200C-BATC PWB(PCB) ASSEMBLY,SUB, L3700TC (PB FREE) CONTROL TOTAL BRAND CL-70 (WITHOUT COIL - FOR CHAMELEON) PWB(PCB) ASSEMBLY,SUB, L4200TC (PB FREE) LED & P/SW TOTAL BRAND (42INCH 46INCH) METAL ASSEMBLY, FRAME CENTER (L4200A) METAL ASSEMBLY, FRAME SIDE(L) METAL ASSEMBLY, FRAME SIDE (R) METAL ASSEMBLY, FRAME MAIN ASSY (COMMERCIAL) COVER ASSEMBLY, L4200AL REAR 3550TKK501A -CKD-Only M4200C-SAFC COVER ASSEMBLY, L4200 REAR 3550TKK501A DECO-Only L4200C-BATC METAL, FRAME SUPPORT SIDE (L4200A) METAL, SUPPORT SIDE (L4200A) METAL, SUPPORT CENTER TOP (L4200A) METAL, SUPPORT CENTER BOTTOM (L4200A) METAL, PLATE AC-SOCKET-DUMMY (L4200TC) PWB(PCB) ASSEMBLY,POWER, 37-42 CHAMELRON CHASSIS PSU POWER TOTAL BRAND KN-POWERTEK MAIN TOTAL ASSEMBLY, M4200C (PB FREE) BRAND CL-70 METAL ASSEMBLY, SHIELD REAR ASSY (L4200TC) COVER ASSEMBLY, L4200A SPEAKER . FRONT-SILVER, BACK-PEARL BACK (SP4200S)-Only M4200C-SAFC COVER ASSEMBLY, L4200A SPEAKER . FRONT-BLACK, BACK-PEARL BACK-Only M4200C-BAPC CABLE,D-SUB, UL20276-9C(5.8MM) DT L1800,CORE POS400,,S/HEADMM GRAY(85964) BRAND DM-SILVER CABLE,D-SUB, UL20276-9C(5.8MM) DT L1800,CORE POS400,,S/HEAD 1.8MM BLACK(9930) DELL 20.1 DM CABLE,DVI, UL20276(7.5MM) DT 2000MM GRAY(85964) 20 MODEL DM-SILVER CABLE,DVI, UL20276 DT 2000MM BLACK(9930) LG883D DM REMOTE CONTROLLER RECEIVER, TSOP4838SO1 VISHAY 38.0KHZ LF,HOLDERLESS CORD,A/V, A/V KHC-LG-3-0010 UL 2851 #28-2C 1500MM BLACK(9930) KSD WITH CORE LM295B CORD,A/V, RCA TO STEREO CABLE KCA-ET-0-0043 UL2863AWG25 TWI 1870MM WHITE WH/RED-WH
020
6304FLP286A or 6304FLP208A
030
3809TKE027E 3809TKE027D
040
3043TKK157K 3043TKK157L 3043TKK157G
050 060 070 080 090 100 110
6871TST481G 6871TST928C 4951TKS144A 4951TKS142A 4951TKS142B 4951TKS195B 3551TKK511B 3551TKK511A
120 130 140 150 160 170 180 190 200
4950TKK760A 4950TKK760B 4950TKK774A 4950TKK775A 4950TKA145A 6871TPT292B 3313TL4008A 4951TKK226A 3551TKS050E 3551TKS050F
210
6850TD9007E 6850TD9007D
220
6866TDV004R 6866TDV004J
230 240 250
6726TV0001A 6852TAZ006J 6852TAZ006V
- 23 -
REPLACEMENT PARTS LIST
CAUTION: BEFORE REPLACING ANY OF THESE COMPONENTS, READ CAREFULLY THE SAFETY PRECAUTIONS IN THIS MANUAL. * NOTE : S SAFETY Mark AL ALTERNATIVE PARTS
*S *AL LOC. NO.
PART NO.
DATE: 2005. 05. 20. DESCRIPTION / SPECIFICATION
*S *AL LOC. NO. C212 C222 C225 C226 C227 C228 C229 C231 C233 C234 C238 C243 C244 C288 C289 C291 C292 C304 C305 C306 C316 C317 C318 C319 C320 C340 C341 C342 C346 C347 C348 C349 C358 C360 C365 C366 C368 C369 C370 C373 C376 C377 C379 C381 C382 C401 C402 C403 C404 C405 C406 C407 C408 C409
PART NO. 0CE225VK6DC 0CE335VK6DC 0CH8336H611 0CH3103K516 0CE225VK6DC 0CE225VK6DC 0CK104CK56A 0CC680CK41A 0CE227VF6DC 0CH3103K516 0CE227VF6DC 0CK103CK51A 0CK104CK56A 0CH8226F691 0CH3104K566 0CH8226F691 0CH3104K566 0CH8106F691 0CE227VF6DC 0CH3104K566 0CK104CK56A 0CK104CK56A 0CK473CK56A 0CK473CK56A 0CH3104K566 0CC102CK41A 0CK473CK56A 0CK473CK56A 0CK104CK56A 0CK473CK56A 0CK473CK56A 0CH8106F691 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CH8106F691 0CK104CK56A 0CH3104K566 0CH3104K566 0CH3104K566 0CK104CK56A 0CH3104K566 0CH3104K566 0CK104CK56A 0CK104CK56A 0CH3104K566 0CK104CK56A 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CK104CK56A 0CH8226F691 0CH3104K566 0CK104CK56A
DATE: 2005. 05. 20. DESCRIPTION / SPECIFICATION 2.2UF MV 50V 20% R/TP(SMD) S 3.3UF MV 50V 20% R/TP(SMD) S 33UF 25V M 85STD(CYL) R/TP 10000PF 50V 10% B(Y5P) 2012 2.2UF MV 50V 20% R/TP(SMD) S 2.2UF MV 50V 20% R/TP(SMD) S 0.1UF 1608 50V 10% R/TP X7R 68PF 1608 50V 5% R/TP NP0 220UF MV 16V 20% R/TP(SMD) S 10000PF 50V 10% B(Y5P) 2012 220UF MV 16V 20% R/TP(SMD) S 0.01UF 1608 50V 10% R/TP B(Y 0.1UF 1608 50V 10% R/TP X7R 22UF 16V 20% 105STD (CYL) R/ 0.1UF 50V 10% X7R 2012 R/TP 22UF 16V 20% 105STD (CYL) R/ 0.1UF 50V 10% X7R 2012 R/TP 10UF 16V 20% 105STD (CYL) R/ 220UF MV 16V 20% R/TP(SMD) S 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 47000PF 1608 50V 10% R/TP X7 47000PF 1608 50V 10% R/TP X7 0.1UF 50V 10% X7R 2012 R/TP 1000PF 1608 50V 5% R/TP NP0 47000PF 1608 50V 10% R/TP X7 47000PF 1608 50V 10% R/TP X7 0.1UF 1608 50V 10% R/TP X7R 47000PF 1608 50V 10% R/TP X7 47000PF 1608 50V 10% R/TP X7 10UF 16V 20% 105STD (CYL) R/ 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 10UF 16V 20% 105STD (CYL) R/ 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 0.01UF 1608 50V 10% R/TP B(Y 0.01UF 1608 50V 10% R/TP B(Y 0.01UF 1608 50V 10% R/TP B(Y 0.1UF 1608 50V 10% R/TP X7R 22UF 16V 20% 105STD (CYL) R/ 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R
MAIN BOARD CAPACITORS
C1002 C102 C103 C1049 C105 C1059 C106 C1061 C110 C112 C113 C114 C116 C117 C118 C119 C120 C121 C122 C123 C124 C125 C126 C127 C128 C129 C130 C131 C132 C133 C134 C135 C136 C137 C138 C139 C140 C141 C142 C143 C144 C145 C146 C147 C148 C149 C150 C151 C152 C153 C205 C206 0CE107WF6DC 0CE477EF638 0CK104CK56A 0CK104CK56A 0CE477EF638 0CK104CK56A 0CK104CK56A 0CE107WF6DC 0CE477EF638 0CC101CK41A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CC101CK41A 0CH3104K566 0CC101CK41A 0CC101CK41A 0CC101CK41A 0CK104CK56A 0CC101CK41A 0CK104CK56A 0CE476VC6DC 0CK103CK51A 0CE476VC6DC 0CK224CF56A 0CK224CF56A 0CK224CF56A 0CK224CF56A 0CK103CK51A 0CE476VC6DC 0CK224CF56A 0CK224CF56A 0CK103CK51A 0CK224CF56A 0CK224CF56A 0CE476VC6DC 0CC101CK41A 0CK104CK56A 0CK104CK56A 0CC101CK41A 0CK103CK51A 0CE476VC6DC 0CK103CK51A 0CE476VC6DC 0CK103CK51A 0CH5471K416 0CK103CK51A 0CE477EF638 0CK474CH94A 0CK104CK56A 0CH8226F691 0CH3104K566 100UF MVK 16V 20% R/TP(SMD) 470UF KMG 16V M FM5 TP 5 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 470UF KMG 16V M FM5 TP 5 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 100UF MVK 16V 20% R/TP(SMD) 470UF KMG 16V M FM5 TP 5 100PF 1608 50V 5% R/TP NP0 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 100PF 1608 50V 5% R/TP NP0 0.1UF 50V 10% X7R 2012 R/TP 100PF 1608 50V 5% R/TP NP0 100PF 1608 50V 5% R/TP NP0 100PF 1608 50V 5% R/TP NP0 0.1UF 1608 50V 10% R/TP X7R 100PF 1608 50V 5% R/TP NP0 0.1UF 1608 50V 10% R/TP X7R 47UF MV 6.3V 20% R/TP(SMD) S 0.01UF 1608 50V 10% R/TP B(Y 47UF MV 6.3V 20% R/TP(SMD) S 0.22UF 1608 16V 10% R/TP X7R 0.22UF 1608 16V 10% R/TP X7R 0.22UF 1608 16V 10% R/TP X7R 0.22UF 1608 16V 10% R/TP X7R 0.01UF 1608 50V 10% R/TP B(Y 47UF MV 6.3V 20% R/TP(SMD) S 0.22UF 1608 16V 10% R/TP X7R 0.22UF 1608 16V 10% R/TP X7R 0.01UF 1608 50V 10% R/TP B(Y 0.22UF 1608 16V 10% R/TP X7R 0.22UF 1608 16V 10% R/TP X7R 47UF MV 6.3V 20% R/TP(SMD) S 100PF 1608 50V 5% R/TP NP0 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 100PF 1608 50V 5% R/TP NP0 0.01UF 1608 50V 10% R/TP B(Y 47UF MV 6.3V 20% R/TP(SMD) S 0.01UF 1608 50V 10% R/TP B(Y 47UF MV 6.3V 20% R/TP(SMD) S 0.01UF 1608 50V 10% R/TP B(Y 470PF 50V 5% NP0 2012 R/TP 0.01UF 1608 50V 10% R/TP B(Y 470UF KMG 16V M FM5 TP 5 "0.47UF 1608 25V 80%,-20% R/T" 0.1UF 1608 50V 10% R/TP X7R 22UF 16V 20% 105STD (CYL) R/ 0.1UF 50V 10% X7R 2012 R/TP
- 24 -
*S *AL LOC. NO. C410 C4101 C411 C412 C413 C414 C415 C416 C417 C418 C420 C421 C422 C423 C424 C425 C426 C427 C428 C429 C430 C435 C459 C460 C461 C462 C463 C464 C468 C469 C470 C471 C472 C473 C474 C475 C476 C477 C478 C479 C480 C481 C482 C483 C484 C487 C488 C489 C490 C491 C492 C493 C494 C495 C496 C497 C498 C499 C501 C5012 C5013 C5014
PART NO. 0CE335VK6DC 0CH3104K566 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CH3104K566 0CK104CK56A 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CC270CK41A 0CC270CK41A 0CK104CK56A 0CK104CK56A 0CC150CK41A 0CC270CK41A 0CK104CK56A 0CK104CK56A 0CH3104K566 0CK104CK56A 0CK104CK56A 0CC220CK41A 0CC220CK41A 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CK224CF56A 0CK474CH94A 0CK474CH94A 0CK474CH94A
DATE: 2005. 05. 20. DESCRIPTION / SPECIFICATION 3.3UF MV 50V 20% R/TP(SMD) S 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 0.01UF 1608 50V 10% R/TP B(Y 0.01UF 1608 50V 10% R/TP B(Y 0.01UF 1608 50V 10% R/TP B(Y 0.01UF 1608 50V 10% R/TP B(Y 27PF 1608 50V 5% R/TP NP0 27PF 1608 50V 5% R/TP NP0 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 15PF 1608 50V 5% R/TP NP0 27PF 1608 50V 5% R/TP NP0 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 22PF 1608 50V 5% R/TP NP0 22PF 1608 50V 5% R/TP NP0 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.22UF 1608 16V 10% R/TP X7R "0.47UF 1608 25V 80%,-20% R/T" "0.47UF 1608 25V 80%,-20% R/T" "0.47UF 1608 25V 80%,-20% R/T"
*S *AL LOC. NO. C5015 C5019 C502 C5020 C5021 C5022 C503 C504 C505 C506 C507 C508 C509 C510 C511 C512 C513 C514 C515 C516 C517 C519 C523 C524 C525 C526 C527 C528 C529 C530 C531 C532 C533 C534 C535 C536 C537 C538 C539 C540 C541 C542 C543 C544 C545 C546 C547 C548 C549 C550 C551 C552 C553 C554 C555 C556 C557 C558 C559 C560 C561 C562
PART NO. 0CH8106F691 0CH8106F691 0CK224CF56A 0CK103CK51A 0CK105CF94A 0CK474CH94A 0CC102CK41A 0CC102CK41A 0CE227VF6DC 0CK224CF56A 0CK104CK56A 0CK224CF56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK224CF56A 0CK224CF56A 0CK224CF56A 0CE107WF6DC 0CE107WF6DC 0CK224CF56A 0CH3103K516 0CH8106F691 0CH8106F691 0CH8106F691 0CE476WF6DC 0CE475VK6DC 0CK103CK51A 0CH3104K566 0CH3104K566 0CH3104K566 0CK104CK56A 0CH8476H691 0CK103CK51A 0CE107WF6DC 0CH3104K566 0CH8476H691 0CC102CK41A 0CC102CK41A 0CC101CK41A 0CK474CH94A 0CK104CK56A 0CC560CK41A 0CK104CK56A 0CH5560K416 0CH3105H946 0CH5560K416 0CK474CH94A 0CK105CF94A 0CK474CH94A 0CC3R3CK01A 0CK105CF94A 0CK105CF94A 0CK105CF94A 0CK105CF94A 0CK152CK51A 0CK474CH94A 0CK104CK56A 0CK152CK51A 0CC271CK41A 0CC3R3CK01A
DATE: 2005. 05. 20. DESCRIPTION / SPECIFICATION 10UF 16V 20% 105STD (CYL) R/ 10UF 16V 20% 105STD (CYL) R/ 0.22UF 1608 16V 10% R/TP X7R 0.01UF 1608 50V 10% R/TP B(Y "1UF 1608 16V 80%,-20% R/TP F" "0.47UF 1608 25V 80%,-20% R/T" 1000PF 1608 50V 5% R/TP NP0 1000PF 1608 50V 5% R/TP NP0 220UF MV 16V 20% R/TP(SMD) S 0.22UF 1608 16V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.22UF 1608 16V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.22UF 1608 16V 10% R/TP X7R 0.22UF 1608 16V 10% R/TP X7R 0.22UF 1608 16V 10% R/TP X7R 100UF MVK 16V 20% R/TP(SMD) 100UF MVK 16V 20% R/TP(SMD) 0.22UF 1608 16V 10% R/TP X7R 10000PF 50V 10% B(Y5P) 2012 10UF 16V 20% 105STD (CYL) R/ 10UF 16V 20% 105STD (CYL) R/ 10UF 16V 20% 105STD (CYL) R/ 47UF MVK 16V 20% R/TP(SMD) S 4.7UF MV 50V 20% R/TP(SMD) S 0.01UF 1608 50V 10% R/TP B(Y 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 47UF 25V 20% 105STD (CYL) R/ 0.01UF 1608 50V 10% R/TP B(Y 100UF MVK 16V 20% R/TP(SMD) 0.1UF 50V 10% X7R 2012 R/TP 47UF 25V 20% 105STD (CYL) R/ 1000PF 1608 50V 5% R/TP NP0 1000PF 1608 50V 5% R/TP NP0 100PF 1608 50V 5% R/TP NP0 "0.47UF 1608 25V 80%,-20% R/T" 0.1UF 1608 50V 10% R/TP X7R 56PF 1608 50V 5% R/TP NP0 0.1UF 1608 50V 10% R/TP X7R 56PF 50V 5% NP0 2012 R/TP "1UF 25V 80%,-20% F(Y5V) 2012" 56PF 50V 5% NP0 2012 R/TP "0.47UF 1608 25V 80%,-20% R/T" "1UF 1608 16V 80%,-20% R/TP F" "0.47UF 1608 25V 80%,-20% R/T" 3.3PF 1608 50V 0.25 PF R/TP "1UF 1608 16V 80%,-20% R/TP F" "1UF 1608 16V 80%,-20% R/TP F" "1UF 1608 16V 80%,-20% R/TP F" "1UF 1608 16V 80%,-20% R/TP F" 1500PF 1608 50V 10% R/TP B(Y "0.47UF 1608 25V 80%,-20% R/T" 0.1UF 1608 50V 10% R/TP X7R 1500PF 1608 50V 10% R/TP B(Y 270PF 1608 50V 5% R/TP NP0 3.3PF 1608 50V 0.25 PF R/TP
- 25 -
*S *AL LOC. NO. C563 C564 C565 C566 C567 C568 C569 C570 C571 C572 C573 C574 C575 C576 C577 C578 C579 C580 C581 C582 C583 C584 C585 C586 C587 C588 C602 C603 C604 C605 C606 C607 C608 C609 C610 C611 C612 C614 C615 C616 C617 C618 C619 C620 C621 C622 C623 C624 C625 C627 C629 C632 C636 C639 C642 C645 C646 C648 C651 C654 C655 C656
PART NO. 0CH3105H946 0CH8476H691 0CK104CK56A 0CK104CK56A 0CK474CH94A 0CK103CK51A 0CC102CK41A 0CK474CH94A 0CK474CH94A 0CK103CK51A 0CC102CK41A 0CK332CK51A 0CK332CK51A 0CK474CH94A 0CE107WF6DC 0CH3103K516 0CK104CK56A 0CK104CK56A 0CE107WF6DC 0CK104CK56A 0CH3105H946 0CH3103K516 0CE107WF6DC 0CK105CF94A 0CH8106F691 0CH8106F691 0CH3103K516 0CE227VF6DC 0CK105CF94A 0CC102CK41A 0CK103CK51A 0CK104CK56A 0CH8476K611 0CK104CK56A 0CK104CK56A 0CK103CK51A 0CE477EF638 0CH3103K516 0CK105CF94A 0CE227VF6DC 0CK104CK56A 0CC102CK41A 0CE477EF638 0CK103CK51A 0CK104CK56A 0CK103CK51A 0CE477EF638 0CH8226F691 0CH3104K566 0CH8476K611 0CK103CK51A 0CE227VF6DC 0CC102CK41A 0CK105CF94A 0CE107WF6DC 0CH3104K566 0CH8226F691 0CH3104K566 0CE227VF6DC 0CK104CK56A 0CH3104K566 0CK104CK56A
DATE: 2005. 05. 20. DESCRIPTION / SPECIFICATION "1UF 25V 80%,-20% F(Y5V) 2012" 47UF 25V 20% 105STD (CYL) R/ 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R "0.47UF 1608 25V 80%,-20% R/T" 0.01UF 1608 50V 10% R/TP B(Y 1000PF 1608 50V 5% R/TP NP0 "0.47UF 1608 25V 80%,-20% R/T" "0.47UF 1608 25V 80%,-20% R/T" 0.01UF 1608 50V 10% R/TP B(Y 1000PF 1608 50V 5% R/TP NP0 3300PF 1608 50V 10% R/TP B(Y 3300PF 1608 50V 10% R/TP B(Y "0.47UF 1608 25V 80%,-20% R/T" 100UF MVK 16V 20% R/TP(SMD) 10000PF 50V 10% B(Y5P) 2012 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 100UF MVK 16V 20% R/TP(SMD) 0.1UF 1608 50V 10% R/TP X7R "1UF 25V 80%,-20% F(Y5V) 2012" 10000PF 50V 10% B(Y5P) 2012 100UF MVK 16V 20% R/TP(SMD) "1UF 1608 16V 80%,-20% R/TP F" 10UF 16V 20% 105STD (CYL) R/ 10UF 16V 20% 105STD (CYL) R/ 10000PF 50V 10% B(Y5P) 2012 220UF MV 16V 20% R/TP(SMD) S "1UF 1608 16V 80%,-20% R/TP F" 1000PF 1608 50V 5% R/TP NP0 0.01UF 1608 50V 10% R/TP B(Y 0.1UF 1608 50V 10% R/TP X7R 47UF 50V 20% 85STD (CYL) R/T 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.01UF 1608 50V 10% R/TP B(Y 470UF KMG 16V M FM5 TP 5 10000PF 50V 10% B(Y5P) 2012 "1UF 1608 16V 80%,-20% R/TP F" 220UF MV 16V 20% R/TP(SMD) S 0.1UF 1608 50V 10% R/TP X7R 1000PF 1608 50V 5% R/TP NP0 470UF KMG 16V M FM5 TP 5 0.01UF 1608 50V 10% R/TP B(Y 0.1UF 1608 50V 10% R/TP X7R 0.01UF 1608 50V 10% R/TP B(Y 470UF KMG 16V M FM5 TP 5 22UF 16V 20% 105STD (CYL) R/ 0.1UF 50V 10% X7R 2012 R/TP 47UF 50V 20% 85STD (CYL) R/T 0.01UF 1608 50V 10% R/TP B(Y 220UF MV 16V 20% R/TP(SMD) S 1000PF 1608 50V 5% R/TP NP0 "1UF 1608 16V 80%,-20% R/TP F" 100UF MVK 16V 20% R/TP(SMD) 0.1UF 50V 10% X7R 2012 R/TP 22UF 16V 20% 105STD (CYL) R/ 0.1UF 50V 10% X7R 2012 R/TP 220UF MV 16V 20% R/TP(SMD) S 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R
*S *AL LOC. NO. C659 C660 C661 C662 C664 C666 C667 C669 C671 C678 C679 C680 C681 C682 C683 C702 C704 C706 C708 C713 C714 C720 C725 C726 C727 C728 C730 C732 C735 C801 C802 C803 C804 C805 C806 C807 C808 C809 C810 C811 C812 C813 C814 C815 C816 C817 C818 C819 C820 C821 C822 C823 C824 C825 C826 C827 C828 C829 C830 C831 C832 C833
PART NO. 0CE227VF6DC 0CK104CK56A 0CK103CK51A 0CH8476K611 0CH3104K566 0CH8226F691 0CH8226F691 0CH3104K566 0CE107WF6DC 0CH8106F691 0CK103CK51A 0CE477EF638 0CE477EF638 0CK104CK56A 0CK104CK56A 0CC471CK41A 0CC471CK41A 0CC471CK41A 0CC471CK41A 0CC471CK41A 0CC471CK41A 0CC331CK41A 0CC101CK41A 0CC471CK41A 0CC101CK41A 0CC471CK41A 0CC471CK41A 0CC471CK41A 0CE227VF6DC 0CK104CK56A 0CH3104K566 0CK104CK56A 0CK104CK56A 0CH3104K566 0CK104CK56A 0CH3104K566 0CK104CK56A 0CH3104K566 0CK104CK56A 0CH3104K566 0CK104CK56A 0CK106EF56A 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CH3104K566 0CH3104K566 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566
DATE: 2005. 05. 20. DESCRIPTION / SPECIFICATION 220UF MV 16V 20% R/TP(SMD) S 0.1UF 1608 50V 10% R/TP X7R 0.01UF 1608 50V 10% R/TP B(Y 47UF 50V 20% 85STD (CYL) R/T 0.1UF 50V 10% X7R 2012 R/TP 22UF 16V 20% 105STD (CYL) R/ 22UF 16V 20% 105STD (CYL) R/ 0.1UF 50V 10% X7R 2012 R/TP 100UF MVK 16V 20% R/TP(SMD) 10UF 16V 20% 105STD (CYL) R/ 0.01UF 1608 50V 10% R/TP B(Y 470UF KMG 16V M FM5 TP 5 470UF KMG 16V M FM5 TP 5 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 470PF 1608 50V 5% R/TP NP0 470PF 1608 50V 5% R/TP NP0 470PF 1608 50V 5% R/TP NP0 470PF 1608 50V 5% R/TP NP0 470PF 1608 50V 5% R/TP NP0 470PF 1608 50V 5% R/TP NP0 330PF 1608 50V 5% R/TP NP0 100PF 1608 50V 5% R/TP NP0 470PF 1608 50V 5% R/TP NP0 100PF 1608 50V 5% R/TP NP0 470PF 1608 50V 5% R/TP NP0 470PF 1608 50V 5% R/TP NP0 470PF 1608 50V 5% R/TP NP0 220UF MV 16V 20% R/TP(SMD) S 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 10UF 3216 16V 10% X7R R/TP 0.01UF 1608 50V 10% R/TP B(Y 0.01UF 1608 50V 10% R/TP B(Y 0.01UF 1608 50V 10% R/TP B(Y 0.01UF 1608 50V 10% R/TP B(Y 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP
- 26 -
*S *AL LOC. NO. C834 C835 C836 C837 C838 C839 C840 C841 C842 C843 C844 C846 C847 C848 C849 C850 C852 C853 C854 C860 C861 C862 C901 C9010 C9011 C9012 C902 C904 C905 C906 C907 C908 C909 C910 C911 C912 C913 C914 C915 C916 C917 C918 C919 C920 C921 C922 C923 C924 C925 C926 C927 C928 C929 C930 C931 C932 C933 C934 C935 C936 C937 C938
PART NO. 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CE227VF6DC 0CE227VF6DC 0CC220CK41A 0CC220CK41A 0CE227VF6DC 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CK103CK51A 0CC3R3CK01A 0CK104CK56A 0CK104CK56A 0CC821CK41A 0CC3R3CK01A 0CH8226F691 0CK104CK56A 0CK104CK56A 0CH3104K566 0CH3104K566 0CK104CK56A 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CE227VF6DC 0CE227VF6DC 0CH8226F691 0CH3104K566 0CK104CK56A 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH8226F691 0CK104CK56A 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH8226F691 0CH3104K566 0CH3104K566 0CK104CK56A 0CK104CK56A 0CH8226F691 0CH3104K566 0CH3104K566
DATE: 2005. 05. 20. DESCRIPTION / SPECIFICATION 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 220UF MV 16V 20% R/TP(SMD) S 220UF MV 16V 20% R/TP(SMD) S 22PF 1608 50V 5% R/TP NP0 22PF 1608 50V 5% R/TP NP0 220UF MV 16V 20% R/TP(SMD) S 0.01UF 1608 50V 10% R/TP B(Y 0.01UF 1608 50V 10% R/TP B(Y 0.01UF 1608 50V 10% R/TP B(Y 0.01UF 1608 50V 10% R/TP B(Y 0.01UF 1608 50V 10% R/TP B(Y 0.01UF 1608 50V 10% R/TP B(Y 3.3PF 1608 50V 0.25 PF R/TP 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 820PF 1608 50V 5% R/TP NP0 3.3PF 1608 50V 0.25 PF R/TP 22UF 16V 20% 105STD (CYL) R/ 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 220UF MV 16V 20% R/TP(SMD) S 220UF MV 16V 20% R/TP(SMD) S 22UF 16V 20% 105STD (CYL) R/ 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 22UF 16V 20% 105STD (CYL) R/ 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 22UF 16V 20% 105STD (CYL) R/ 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 22UF 16V 20% 105STD (CYL) R/ 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP
*S *AL LOC. NO. C939 C940 C941 C942 C943 C944 C945 C946 C948 C953 C954 C955 C956 C957 C971 C972 C973 C985 C986 C987
PART NO. 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CC821CK41A 0CH8226F691 0CK104CK56A 0CK104CK56A 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566 0CH3104K566
DATE: 2005. 05. 20. DESCRIPTION / SPECIFICATION 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 820PF 1608 50V 5% R/TP NP0 22UF 16V 20% 105STD (CYL) R/ 0.1UF 1608 50V 10% R/TP X7R 0.1UF 1608 50V 10% R/TP X7R 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP 0.1UF 50V 10% X7R 2012 R/TP
DIODEs
D1002 D1003 D101 D102 D103 D104 D105 D106 D107 D108 D109 D110 D111 D112 D113 D114 D115 D116 D117 D118 D119 D120 D121 D130 D131 D132 D505 D506 D507 D508 D603 D604 U102 U103 U105 U106 U108 U109 U110 0DD184009AA 0DD184009AA 0DS226009AA 0DS226009AA 0DS226009AA 0DS226009AA 0DS226009AA 0DD184009AA 0DD184009AA 0DD184009AA 0DD184009AA 0DS226009AA 0DS226009AA 0DS226009AA 0DS226009AA 0DS226009AA 0DS226009AA 0DS226009AA 0DS226009AA 0DS226009AA 0DS226009AA 0DD184009AA 0DD184009AA 0DSON00138A 0DSON00138A 0DSON00138A 0DSON00138A 0DSON00138A 0DSON00138A 0DSON00138A 0DS226009AA 0DS226009AA 0DRCE00018A 0DRCE00018A 0DRCE00018A 0DRCE00018A 0DRCE00018A 0DRCE00018A 0DRCE00018A KDS184 TP KEC - 85V - - - 30 KDS184 TP KEC - 85V - - - 30 KDS226 TP KEC - 80V - - 4NSE KDS226 TP KEC - 80V - - 4NSE KDS226 TP KEC - 80V - - 4NSE KDS226 TP KEC - 80V - - 4NSE KDS226 TP KEC - 80V - - 4NSE KDS184 TP KEC - 85V - - - 30 KDS184 TP KEC - 85V - - - 30 KDS184 TP KEC - 85V - - - 30 KDS184 TP KEC - 85V - - - 30 KDS226 TP KEC - 80V - - 4NSE KDS226 TP KEC - 80V - - 4NSE KDS226 TP KEC - 80V - - 4NSE KDS226 TP KEC - 80V - - 4NSE KDS226 TP KEC - 80V - - 4NSE KDS226 TP KEC - 80V - - 4NSE KDS226 TP KEC - 80V - - 4NSE KDS226 TP KEC - 80V - - 4NSE KDS226 TP KEC - 80V - - 4NSE KDS226 TP KEC - 80V - - 4NSE KDS184 TP KEC - 85V - - - 30 KDS184 TP KEC - 85V - - - 30 "MMBD301LT1G,LF ON SEMI R/TP" "MMBD301LT1G,LF ON SEMI R/TP" "MMBD301LT1G,LF ON SEMI R/TP" "MMBD301LT1G,LF ON SEMI R/TP" "MMBD301LT1G,LF ON SEMI R/TP" "MMBD301LT1G,LF ON SEMI R/TP" "MMBD301LT1G,LF ON SEMI R/TP" KDS226 TP KEC - 80V - - 4NSE KDS226 TP KEC - 80V - - 4NSE "PACDN004SR,LF CAMD R/TP SOT1" "PACDN004SR,LF CAMD R/TP SOT1" "PACDN004SR,LF CAMD R/TP SOT1" "PACDN004SR,LF CAMD R/TP SOT1" "PACDN004SR,LF CAMD R/TP SOT1" "PACDN004SR,LF CAMD R/TP SOT1" "PACDN004SR,LF CAMD R/TP SOT1"
- 27 -
*S *AL LOC. NO. U111 ZD1001 ZD101 ZD102 ZD103 ZD104 ZD105 ZD106 ZD107 ZD108 ZD109 ZD110 ZD111 ZD112 ZD113 ZD114 ZD401 ZD402 ZD403 ZD404 ZD501 ZD502 ZD503 ZD504 ZD505 ZD601 ZD701 ZD702 ZD703 ZD704 ZD705 ZD706 ZD707 ZD708 ZD709 ZD710 ZD711 ZD712 ZD713 ZD714 ZD715 ZD716 ZD719 ZD720 ZD721 ZD722 ZD723 ZD724
PART NO. 0DRCE00018A 0DZ360009EB 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ910009FE 0DZ910009FE 0DZ910009FE 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA 0DZ560009DA
DATE: 2005. 05. 20. DESCRIPTION / SPECIFICATION "PACDN004SR,LF CAMD R/TP SOT1" UDZ 3.6B TP ROHM SOD323 200M UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZS 9.1B TP ROHM - - 9.1V UDZS 9.1B TP ROHM - - 9.1V UDZS 9.1B TP ROHM - - 9.1V UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323 UDZ S 5.6B TP ROHM-K SOD323
*S *AL LOC. NO. U122 U123 U124 U201 U203 U204 U303 U304 U401 U402 U403 U404 U501 U502 U503 U504 U505 U506 U522 U523 U524 U608 U609 U611 U612 U614 U616 U801 U802 U803 U804 U901 U902 U907 U908
PART NO. 0ISTL00026A 0ISTLFA058A 0ISTLFA058A 0ISO204000A 0ISS780500H 0IPMGKE036A 0IPRPM3002D 0IPMGNS001E 0IMMRHY051B 0IPRPGN011E 0IZZTSZ716A 0IMMRSS040D 0IPRPMN001C 0IPRPTI036B 0IPRPJR017A 0IPMGFA003B 0IPRPTI015A 0IMCRTI001A 0ISS780800J 0IPRPNS030A 0IKE358000P 0IPMGKE036A 0IPMGSG020A 0IPMGSG020A 0IPMGFA003B 0IPMGNS001E 0IPMGNS001E 0IPRPNE011A 0ISS416162D 0IPMGNS001E 0IPMGRH001D 0IPRPM7001B 0IMMRSS037F 0IPMGNS001E 0IPMGFA003B
DATE: 2005. 05. 20. DESCRIPTION / SPECIFICATION "MC14066BDR2G,LF ON SEMI 14P," "74F14SCX FAIRCHILD 14P,SOIC" "74F14SCX FAIRCHILD 14P,SOIC" "CXA2040AQ 32P,QFP BK IIC BUS" "KA78M05-R 3P,D-PAK TP 5V 0.5" KIA78DL09F KEC DPARK R/TP 9V "MST9883C-LF-110 MSTAR 80P,LQ" "LM1117MPX-3.3,NOPB NATIONAL" "HY5DU283222AQP-4,LF HYNIX 10" GM1501H-CF-LF(ESD ENHANCEMEN STM TSOP 48P 8M FLASH S524A60X51(SC70) SAMSUNG ELE MSP3420G-C12-100 MICRONAS 80 "TPA3004D2PHPRG4,LF TEXAS INS" "NJU26901E2 JRC 8P,EMP R/TP D" RC1117S-2.5 FAIRCHILD SOT-22 MAX232DR TEXAS INSTRUMENT 16 "SN74HCT157DR,LF TEXAS INSTR" "KA78M08R 3P,D-PAK TP VOL. RE" "LM35DZ,NOPB NATIONAL SEMICON" KIA358F 8P FLP-8 TP OP-AMP D KIA78DL09F KEC DPARK R/TP 9V "LD1117DT18TR,LF SGS-THOMSON" "LD1117DT18TR,LF SGS-THOMSON" RC1117S-2.5 FAIRCHILD SOT-22 "LM1117MPX-3.3,NOPB NATIONAL" "LM1117MPX-3.3,NOPB NATIONAL" "UPD64012GJ-8EN-A,PB FREE NEC" K4S161622H-UC80 SAMSUNG ELEC "LM1117MPX-3.3,NOPB NATIONAL" "BA15BC0FP-E2 ROHM 3P,TO252 R" "MDIN-150L,ROHS MIT 256PIN,QF" "K4S643232H-UC60,LF SAMSUNG E" "LM1117MPX-3.3,NOPB NATIONAL" RC1117S-2.5 FAIRCHILD SOT-22
COILs & COREs & FILTERs
L511 L512 L513 L514 L409 L410 L613 L701 L702 L704 L705 L706 L707 L710 L711 L712 L713 L920 R905 L101 L1010 L1012 L103 L104 6140TBZ007E 6140TBZ007E 6140TBZ007E 6140TBZ007E 6210TCE001P 6210TCE001P 6210TCE001H 6210TCE001P 6210TCE001P 6210TCE001P 6210TCE001P 6210TCE001P 6210TCE001P 6210TCE001F 6210TCE001F 6210TCE001H 6210TCE001H 6210TCE001F 6210TCE001F 6210TCE001A 6210TCE001G 6210TCE001G 6210TCE001Y 6210TCE001Y "SLF12575T-330M3R2,TDK SMD CH" "SLF12575T-330M3R2,TDK SMD CH" "SLF12575T-330M3R2,TDK SMD CH" "SLF12575T-330M3R2,TDK SMD CH" HB-1S2012-121JT CERATECH 201 HB-1S2012-121JT CERATECH 201 HB-1T2012-301JT CERATEC 2012 HB-1S2012-121JT CERATECH 201 HB-1S2012-121JT CERATECH 201 HB-1S2012-121JT CERATECH 201 HB-1S2012-121JT CERATECH 201 HB-1S2012-121JT CERATECH 201 HB-1S2012-121JT CERATECH 201 HB-1S2012-800JT CERATEC 2012 HB-1S2012-800JT CERATEC 2012 HB-1T2012-301JT CERATEC 2012 HB-1T2012-301JT CERATEC 2012 HB-1S2012-800JT CERATEC 2012 HB-1S2012-800JT CERATEC 2012 HB-1S2012-080JT CERATEC 2012 HH-1M3216-501 CERATEC 3216MM HH-1M3216-501 CERATEC 3216MM HB-1H2012-320JT CERATEC 2012 HB-1H2012-320JT CERATEC 2012
ICs
Q404 Q506 U101 U114 U115 U116 U117 U118 U119 U120 U121 0IKE704200J 0IKE704200J 0ISS780800J 0ISS524202C 0ISS524202C 0IPRPAD024A 0IPRPAD024A 0IPRPAD024A 0ISTLFA058A 0ISS524202C 0IRH765700B KIA7042AF SOT-89 TP 4.2V VOL KIA7042AF SOT-89 TP 4.2V VOL "KA78M08R 3P,D-PAK TP VOL. RE" S524A40X21(SC70) SAMSUNG ELE S524A40X21(SC70) SAMSUNG ELE "AD8009JRTZ,LF ANALOG DEVICE" "AD8009JRTZ,LF ANALOG DEVICE" "AD8009JRTZ,LF ANALOG DEVICE" "74F14SCX FAIRCHILD 14P,SOIC" S524A40X21(SC70) SAMSUNG ELE "BA7657F 24P,SOP TP INPUT SIG"
- 28 -
*S *AL LOC. NO. L107 L108 L109 L110 L111 L112 L113 L114 L115 L201 L204 L213 L214 L215 L216 L307 L308 L309 L401 L402 L403 L404 L405 L406 L407 L408 L501 L502 L503 L504 L505 L506 L507 L508 L509 L510 L515 L601 L602 L603 L604 L605 L606 L609 L610 L614 L615 L616 L617 L618 L619 L620 L621 L624 L625 L801 L802 L8