AIWA LCX NO POWER.pdf part of aiwa LCX-137/157/337/356/357AC1/DR37 AIWA LCX NO POWER.pdf, Aiwa Service Technical Information text manual preview

Text preview for : AIWA LCX NO POWER.pdf part of aiwa LCX-137/157/337/356/357AC1/DR37 Aiwa Service Technical Information

Back to : AIWA LCX NO POWER.pdf | Home

1/1

Service Technical Information
MODEL NO.

LCX -137 / 157 / 337 / 356 / 357 / AC1 / DR37
SUBJECT

No power

REF.No. :G - A0 - 070 -E0 DATE :22. SEP. 2000

If " No Power " is reported, take the following procedure: The clock is not displayed when AC Plug in, and pressing the power button does not bring any effect. Take the following steps to replace the parts: 1. Remove the P.W.B FRONT from the front cabinet. 2. Change R250 from 3.3 k to 1 k . 3. Check if X202 on the P.W.B FRONT is oscillating. If not oscillating, change X202 to the new one shown in the table below.

PARTS SIDE X202

R250 X202 P. W.B. FRONT PATTERN SIDE

Ref. X202 R250 G - R -

Parts Code 87 -030 -376 -080 88 -108 -102 -080 Code No. -

Description VIB,CER CSA5.76MG200 RESISTOR,1/16W 1K Access Code - Modified Ser. No. S 0810001

Remarks - - Parts Schedule 12.NOV.2000