foodprocessor_Ž_.pdf part of Philips HR 7752/01 foodprocessor_Ž_.pdf, Service Manual Foodprocessor Essence 800W (02/06)

Text preview for : foodprocessor_Ž_.pdf part of Philips HR 7752/01 Service Manual Foodprocessor Essence 800W (02/06) - pag. 6

Back to : foodprocessor_Ž_.pdf | Home

Essence

Foodprocessor HR 7752/01

Philips Domestic Appliances and Personal Care

Service Manual
PRODUCT INFORMATION: The Foodprocessor is equipped with mechanical and thermal safety switches. TECHNICAL DATA: Motor : universal, radio / TV interference suppressed Power consumption : 800 Watt max. Voltage & frequency : 230 V, 50 Hz Cordset : 100 cm, double insulated with moulded on plug Speed setting : 2 speeds + pulse Bowl capacity : 2.5 L dry ingredients, 1.7 L liquids Meat mincer capacity : 1.3 kg meat per minute (pork) Speeds unloaded : blender drive shaft 19500 rpm (max) accessories drive shaft 2150 rpm (max at speed 2 + pulse) accessories drive shaft 1700 rpm (min at speed 1) Weight in fancy box : 6.500 g Dimensions fancy box (l x w x h) : 406 mm x 281 mm x 521 mm SAFETY: Automatically resettable : protects motor against overheating thermal cut out Built in safety lock : detects wheter lid & bowl or meat mincer are assembled Motor brake system : stops the appliance wthin 1.5 seconds COLOURS: White with Vapor Dusk accents, clear transparant bowl MATERIALS USED: - Bowl, bowl lid - Housing, screw cap, pushers, inlay bowl handle, switch - Emulsifying disc - Feeding tray, sausage horn - Kneading accessory - Toolholder bowl, sausage seperator - Insert holder - Foodprocessor knife, insert discs - Cutter, grinding discs - Meat mincer processing tube, worm shaft : SAN : PP : : : : : : : : PP ABS PP / 30% chalk POM ABS Stainless steel Metal Alu - alloy

This product meets the requirements regarding interference suppression on radio and TV.

After the product has been repaired, it should function properly and has to meet the safety requirements as officially laid down at this moment.

Published by Philips Domestic Appliances and Personal Care

Printed in the Netherlands

Š Copyright reserved

Subject to modification

4322 277 00894 02/06

SERVICE INFORMATION : - The blender coupling on the motor shaft has been provided with a customary left-handed thread. The drive coupling (item 10) can be detached by means of a hammer and a screwdriver. Strike the screwdriver with a short sharp blow and remove the drive coupling, or block the acc. drive wheel (item 17) and thereby the rotor shaft, by sticking a pin through the hole (5 mm dia. marked with an arrow) in the bottom plate. - The assembly of the accessories depends on the national version. - For specific versions, the component configuration may differ from the one shown on the exploded view. However, the actual components can be distinguished by their code numbers. - Make sure that all functions, including the safety devices, are working correctly after you have completed the repair. Automatic resettable cut-out (part of item 11) To prevent damage due to overheating, the appliance has been equipped with an automatic cut-out system. This system will automatically cut off the power supply when the appliance overheats.
P blue OFF 1 2 R2 white S1 yellow Rotor S2 brown
U

If the appliance suddenly stops running: - Unplug the appliance - Switch off the appliance - Let the appliance cool down for 15 minutes - Plug the appliance in again - Switch the appliance on again Safety lock (item 7) Place the lid on the bowl in the right position. The appliance will only function if the line on the applinace is directly opposite the mark on the lid of the food processor bowl and the same holds for the other accessoires. The built-in safety lock will now be deblocked and you can turn the appliance on. Important: The appliance will not function, when the blender coupling (item 10) has not been protected by the blender cover (item 1). Note: The blender cover can only be removed, when the bowl including the bowl lid or the meat mincer are not mounted on the foodprocessor. How to set the belt tension: Step 1: Give 30 N pretension force on the adjusting plate to minimise the distances between the belt and the belt wheels Step 2: Reduce the tension force from 30 N down to 10 N which is the required belt drive force for the appliance. Step 3: Fix the adjusting screw on the adjusting plate when the tension force reaches the value of 10 N (after coming down from 30 N!)

red F1 D1 red

brown blue F2 black R1 C1

MAINS yellow

Change-over switch in braking position

PARTS LIST 1 2 3 4 6 7 8 10 11 12 13 14 15 16 17 18 19

HR 7752/01 Service Code 4203 065 63470 4203 065 63620 4203 065 63480 4203 065 60630 4203 065 63490 4203 065 63580 4203 065 63510 4203 065 63570 4203 065 63930 4203 065 63590 4203 065 63600 4203 065 63540 4203 065 60310 4203 065 60440 4203 065 63560 4203 065 63610 4203 065 63980 4203 065 63990 4203 065 64010 4203 065 64030 4203 065 63870 4203 065 63800 4203 065 63760 4203 065 63770 4203 065 63780 4203 065 61540 4203 065 61560 Pos. Description 44 46 47 48 49 70 71 72 73 74 75 76 77 78 80 81 82 83 84 85 86 87 88 89 90 A Insert holder Plastic kneader Metal knife (incl. protecting cover) Emulsifing disc Toolholder Housing upper part Housing lower part Mounting plate Gear assy O - ring Release button Coupling part Drive gear Sealing Feeding tube Worm shaft assy Coupling Cutting blade Cutting disc (Dia. 4mm) Cutting disc (Dia. 8mm) Screw ring Sausage horn bearing Sausage horn Feeding tray Pusher Wire connector for 2 wires Service Code 4203 065 61520 4203 065 63970 4203 065 63690 4203 065 63660 4203 065 63680 4203 065 64160 4203 065 64170 4203 065 64180 4203 065 64220 4203 065 64240 4203 065 64230 4203 065 64190 4203 065 64210 4203 065 64200 4203 065 64050 4203 065 64060 4203 065 64070 4203 065 64080 4203 065 64090 4203 065 64100 4203 065 64110 4203 065 64140 4203 065 64150 4203 065 64120 4203 065 64130 4203 065 63190

Pos. Description Blender cover Screw cap Top housing Switch assy Housing parts Safety switch lever PCB brake Blender coupling Motor assy - 230V Motor coupling assy Mounting plate Adjusting piece Motor screw Tooth belt Belt wheel Single speed gear Cordset EURO Cordset UK Cordset SWISS Press cone Sieve Pusher closed bowl Bowl lid Lid bearing Closed bowl Insert slicing medium Insert shredding medium

30 31 32 33 34 35 41 42

1

2

3

4 7

8

6

A

10 19

11

12 18

13

14 15 A 16 17

DAP2285

41 30

42 31

44

32 46

47

33 34 48

35

49

90

89

80

82 70

81 83 85 86

75 72

84 87

77

88

73

76 78

74 71