Text preview for : frankfurt-c70.pdf part of Blaupunkt frankfurt-c70 frankfurt-c70
Back to : frankfurt-c70.rar | Home
Radio / Cassette
Frankfurt C70
Operating instructions
Bitte aufklappen Open here Ouvrir s.v.p. Aprite la pagina Hier openslaan a.u.b. Öppna Por favor, abrir Favor abrir 2
1
14
2
13 3 12 4 11 10 5
9 8
6
7
3
ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH
PORTUGUÊS
CONTROLS
DEUTSCH
1 2 3 4 5 6 7 8 9 : ; < =
>
39
PORTUGUÊS
ESPAÑOL
SVENSKA
button - opens the operating panel Button - switches the radio and mute function on/off Volume control Soft keys - the function of the soft keys depends on the current content of the display OK button - confirms menu entries and leaves the menu TIM button - selects the TIM function Multifunction rocker switch MENU button - selects the menu for basic settings AUD button - adjusts bass and treble, balance and fader as well as loudness DIS button - changes display contents Display CC button, to start cassette play CDC button - starts CD changer playback (only if connected) or plays an external audio source (only if connected) TUNE button - activates radio mode Selects the radio function menu (only possible in radio mode)
NEDERLANDS
ITALIANO
FRANÇAIS
ENGLISH
TABLE OF CONTENTS
Notes ............................................. 41
Road safety ........................................... 41 Installation ............................................. 41 Accessories ........................................... 41 Guarantee ............................................. 41 International telephone information ....... 41
Cassette mode .............................. 60
Cassette playback ................................. 60 Ejecting a cassette ................................ 60 Changing the playing side ..................... 60 Skipping tracks (S-CPS) ....................... 60 Repeating tracks ................................... 60 Scanning all tracks on a cassette (SCAN) .................................................. 61 Changing the display ............................. 61 Resetting the counter ............................ 61 Fast forward/rewind ............................... 61 Switching radio monitor on/off ............... 61 Skipping blank sections (Blankskip) ...... 61 Dolby* Noise Suppression .................... 62 Traffic announcements in cassette mode ... 62
Theft protection, KeyCard ........... Switching on/off ........................... Using your car radio for the first time ................................................ Volume adjustment ...................... Audio settings .............................. Setting the display ....................... Radio mode ...................................
42 44 45 46 47 48 49
CD changer mode (optional) ....... 62
Switching to CD changer mode ............. 62 Selecting a CD ...................................... 62 Selecting a track .................................... 62 Fast search (audible) ............................. 63 Changing the display ............................. 63 Repeating individual tracks or whole CDs (REPEAT) ...................................... 63 Random play (MIX) ............................... 63 Scanning all tracks on all CDs (SCAN) . 63 Naming CDs .......................................... 64 Programming favourite CD tracks ......... 64
Switching on radio mode ....................... 49 RDS function (AF, REG) ........................ 49 Selecting the frequency range/memory 50 Tuning into a station .............................. 50 Selecting short/long-range reception .... 51 Setting the sensitivity of the station search mode ......................................... 51 Storing stations ..................................... 52 Storing stations automatically (Travelstore) .......................................... 52 Listening to preset stations ................... 52 Scanning stations .................................. 52 Setting the scanning time ...................... 53 Programme type (PTY) ......................... 53 Optimising radio reception .................... 54 Switching between stereo and mono .... 55 Changing the display ............................. 55 Selecting radio text display .................... 55 Naming a station ................................... 56
Clock - Time .................................. 66 Equalizer ....................................... 67
Notes on adjusting the equalizer ........... 67 Switching the equalizer on/off ............... 67 Setting the equalizer ............................. 68 Setting the quality factor of the filter ...... 68 Select sound preset .............................. 68 Setting aid for the equalizer .................. 68
TIM - Traffic Information Memory 57
Switching TIM on/off .............................. 57 Recording traffic announcements ......... 57 Altering TIM record standby time .......... 57 Playback of recorded traffic announcements ..................................... 58 Interrupting TIM record standby (for the time spent at the car wash) ....... 58
Traffic information ........................ 59
40
TMC for dynamic navigation systems ......................................... 70 Pre-amplifiers ............................... 70 Subout/subwoofer ........................ 71 High-pass filter ............................. 71 External audio sources ................ 72 Technical data .............................. 72 Installation instructions ............. 278
NOTES
DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH
Thank you for deciding in favour of a Blaupunkt product. We wish you a great deal of pleasure with your new car radio.
Note
Before using your car radio, please read these instructions carefully and familiarise yourself with the unit. Keep these instructions in your vehicle for later reference.
CD changer The following Blaupunkt CD changers can be connected to the radio: CDC A 06, CDC A 08, CDC A 072 and IDC A 09. The CD changers CDC A 5 and CDC A 071 can also be connected if you use an adapter cable (Blaupunkt no.: 7 607 889 093).
Guarantee
The scope of the guarantee complies with the legal provisions applicable in the country in which the unit was bought. Such legal provisions notwithstanding, Blaupunkt grants a 12-month guarantee. If you have any queries regarding the terms of the guarantee, please consult your authorised Blaupunkt dealer. The purchase receipt applies in all cases as your guarantee slip.
Road safety
Road safety has priority. Only operate your car radio if road and traffic conditions allow. Familiarise yourself with the unit before setting off on your journey. You should always be able to hear police, fire and ambulance sirens in good time. For this reason, set the volume of your car radio at a suitable level.
Installation
If you would like to install your car radio yourself, please read the installation and connection instructions at the end of the manual.
International telephone information
Should you have any questions about how to use the car radio or require any further information, please call us! The telephone information service numbers are printed on the last page of this manual.
Accessories
Please use only Blaupunkt-approved accessories. Remote controls The most important functions can be selected safely from the steering wheel using the optional remote controls RC 08 or RC 10. Amplifiers All Blaupunkt amplifiers are suitable for use with the radio.
41
THEFT PROTECTION
Theft protection, KeyCard
A KeyCard is supplied along with the radio. The car radio can also be used with a second KeyCard. If a KeyCard is lost or damaged, you can obtain a replacement KeyCard through a Blaupunkt dealer. If you use two KeyCards, the settings of the first KeyCard also apply to the second KeyCard. You do, however, have the option of storing the following functions individually: station-button allocation, traffic-information volume, beep volume, equaliser setting. In addition, the last set values for wavelength, station settings, scanning time and switchon volume remain stored. This means that you always have your selected basic setting after inserting the KeyCard.
Note: If a wrong card, e.g. a cash card, is introduced into the car radio, "Wrong KC" will appear on the display. Remove the wrong card and slide in a KeyCard your unit will recognise.
Removing a KeyCard
In order to unlock the operating panel,
press the
button 1.
The operating panel then opens.
Place the card on the carriage and slide
as far to the right as it will go.
Pull the card out of the operating panel. Close the operating panel.
Note: In order to prevent theft, remove the KeyCard when you leave the vehicle and leave the operating panel open. For safety reasons, the operating panel should always be locked when the vehicle is in motion.
Inserting the KeyCard
Press the
button 1. The operating panel opens.
Insert the KeyCard with the contact surfaces facing down as illustrated in the picture (arrow 1).
Making a second KeyCard "learn" the code Replacing a KeyCard
You can use the first KeyCard to make a second KeyCard "learn" to be an additional KeyCard when the car radio is in operation. If you want a second KeyCard to "learn" the code,
2
insert the first KeyCard and switch the
radio on;
1
3
Carefully place the KeyCard on the carriage and slide it in as far as it will go in the direction of the arrow (2).
press the MENU button 8. press the soft key 4 with the display
allocation "KC";
press the soft key 4 with the display
allocation "LRN". "LEARN KC" appears on the display.
Close the operating panel (arrow 3).
42
THEFT PROTECTION
"INSERT" appears on the display.
DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH
Remove the first KeyCard. Insert the new KeyCard.
"LEARN OK" appears on the display. To leave the KeyCard menu,
Making a new KeyCard "learn" the code/entering the master code
If you no longer have a valid KeyCard for your unit and would like to make a new KeyCard learn the code:
press the MENU button 8 once or OK
5 repeatedly until the desired menu appears. The settings are now stored. You can now use your car radio with the new KeyCard. Note: A maximum of two KeyCards can be used for each unit. If you already have two Keycards for your unit and you make a third KeyCard "learn", you will no longer be able to use the unit with the KeyCard not used during the "learning" process.
insert the new KeyCard, which the unit
does not recognise;
close the operating panel; if necessary, switch off the radio; Hold down the TUNE button > and the
second soft key from the top on the left 4 at the same time;
switch the unit on using button 2.
"0000" then appears on the display. Enter the four-digit master code from your car radio pass as follows:
enter the number of the master code
using the and buttons. To do this, press the buttons repeatedly until the desired number appears on the display;
Lost or damaged KeyCard
If all KeyCards belonging to the car radio are damaged or lost, a new KeyCard must first be made to "learn" the unit's master code, which can be found in your car radio pass. Always keep your car radio pass in a safe place, but never in your car. To find out how to prepare a new Keycard for use, please read the section "Making a new KeyCard "learn" the code/entering the master code". If necessary, you can use this KeyCard to make a second KeyCard learn the code. To find out how to do this, please read the section "Making a second KeyCard "learn"/replacing the KeyCard". You can obtain new KeyCards from your specialist dealer.
alter the input position using the
buttons 7;
When the master code is correctly displayed, press the OK button 5. The new KeyCard is accepted when the unit switches to playback..
Optical theft protection display (LED)
The ON button and the drive-compartment lights may flash when the unit is switched off and the KeyCard removed. For this, the "LED" menu setting must be at "on".
Press the MENU button 8. Press the soft key 4 with the display
allocation "KC".
Press the soft key 4 with the display
allocation "LED". The current status "LED ON" or "LED OFF" appears on the display. 43
THEFT PROTECTION
Press the soft key 4 with the display
allocation "LED" to switch between "LED ON" and "LED OFF". To leave the KeyCard menu,
SWITCHING ON/OFF
Switching on/off
There are various ways of switching the car radio on and off.
press the OK button 5 to return to the
previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored.
Switching on/off using the button 2
To switch the unit on, press the button
2. The car radio is now switched on.
Displaying radio pass data
With the KeyCard supplied with your car radio, you can have the data on your radio pass, such as name, type number (7 6 ...) and serial number displayed.
To switch the unit off, hold the button 2
down for more than two seconds. The car radio is now switched off.
Press the MENU button 8. Press the soft key 4 with the display
allocation "KC".
Switching on/off using the ignition
If the car radio is correctly connected to the ignition and has not been switched off using the button 2, it is switched on/off simultaneously with the ignition. You can also switch on your car radio when the vehicle ignition is off.
Press the soft key 4 with the display
allocation "READ". The radio pass data now appear on the display as main text. To leave the KeyCard menu,
press the MENU button 8 or OK 5.
To do so, press the button 2.
Note: To protect the vehicle battery, the unit switches off automatically after one hour.
Taking care of the KeyCard
Your KeyCard will function perfectly if the contacts are kept free of all foreign particles. Avoid direct skin contact. Please clean the KeyCard contacts when necessary with some white spirit on a lintfree cloth.
Switching on/off using the KeyCard
You can switch the car radio on or off by inserting and removing the KeyCard if the unit was previously switched off using the button 2. You can read about inserting/removing the KeyCard in the chapter "Theft protection, KeyCard".
44
USING YOUR CAR RADIO FOR THE FIRST TIME
7.
DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH
Using your car radio for the first time
If the car radio is being connected for the first time or the power supply to the unit has been interrupted, the install menu appears on the display. Please make the following settings in the install menu: select an external audio source instead of a CD changer; set the time; adjust the tuner accordingly for operation in the United States or Europe; revert to manufacturer's setting; switch the internal amplifier on/off. You can go to the install menu at any time:
Set the minutes using the Press the OK button 5.
Setting the tuner
or
button
Press the soft key 4 with the display
allocation "TUNE".
Select "EUROPE" or "US" with the
or button 7.
Press the OK button 5.
Switching the internal amplifier on/off
Press the soft key 4 with the display
allocation "AMP".
Select "AMP ON" or "AMP OFF" with
the or button 7.
Hold down the MENU 8 button until
the install menu appears on the display.
press the OK button 5.
Note: When you set the internal amplifier at "AMP OFF", the loudspeaker directly connected to the unit remains silent. In this case, only an external amplifier produces sound. Reverting to the manufacturer's setting
Entering settings
Selecting an external audio source
Press the soft key 4 with the display
allocation "AUX". If "AUX" appears on the display, the input has already been activated.
Press the soft key 4 with the display
allocation "NORM". "NORMSET" appears on the display. If you really wish to return to the manufacturer's settings,
Press the
or button 7 to switch "AUX" on or off. press the MENU button 8.
When the settings have been entered,
Note: When the AUX input is activated, it can be selected with the CDC = button. Setting the clock
press the OK button 5.
When you have completed all the settings,
press the OK button 5.
Leaving the install menu
In order to leave the install menu,
Press the soft key 4 with the display
allocation "CLK".
press the OK button 5. The settings
are now stored.
Set the hours using the
7.
or
button
Press the
button 7.
45
VOLUME
Volume adjustment
The system volume can be adjusted in steps from 0 (off) to 50 (maximum).
Press the OK button 5 to go back to
the previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored.
To raise the system volume, turn the
volume control 3 to the right.
Mute setting
This feature enables you to lower the system volume instantaneously (mute).
To lower the system volume, turn the
volume control 3 to the left.
Setting the switch-on volume
It is possible to adjust the volume that will play when you switch the radio on.
Briefly press the button 2.
"MUTE" appears on the display. Deactivating the mute setting
Press the MENU button 8. Press the soft key 4 with the display
allocation "VAR".
Briefly press the button 2
or
turn the volume control 3.
Press the soft key 4 with the display
allocation "VOL".
Mute during telephone
If your car radio is connected to a mobile telephone, the volume will be muted as soon as you "pick up" the telephone. In order for this to work, the mobile telephone has to be connected to the car radio as described in the instructions. If a traffic announcement is received during a telephone call and traffic information priority has been activated, the traffic announcement will be relayed via the system's loudspeakers. For further details, please read the chapter entitled "Traffic information".
Set the volume using volume control 3
or the or buttons 7. If you wish to set the volume active before the unit was last switched off as the switchon volume,
press the
button 7.
"LAST VOL" appears on the display. Risk of serious injury! If the switch-on volume is set at the maximum, the volume can be very high when you switch on your car radio. If the volume was set on maximum before the unit was last switched off and the switch-on volume is set at "LAST VOL", the volume can be very high when you switch on your car radio. In both cases, your hearing may suffer serious damage!
46
VOLUME
Setting the volume for the warning tone (beep)
If you hold down a button for longer than two seconds when using certain functions, e.g. storing a station on a station button, a warning tone (beep) sounds. The volume of this beep is adjustable.
AUDIO SETTINGS
DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH
Audio settings
Note: You can adjust the bass, treble and loudness settings separately for each audio source.
Bass settings
Press the AUD button 9.
"AUDIO 1" appears on the display.
Press the MENU button 8. Press the soft key 4 with the display
allocation "VAR".
Press the soft key 4 with the display
allocation "BASS".
Press the soft key 4 with the display
allocation "BEEP".
Press the
Adjust the volume using the
buttons. If you wish to deactivate the beep,
and
or button 7 to adjust the bass. When the settings have been completed,
press the AUD button 9.
press the
button 7.
Treble settings
Press the AUD button 9.
"AUDIO 1" appears on the display.
"BEEP OFF" appears on the display.
Press the OK button 5 to return to the
previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored.
Press the soft key 4 with the display
allocation "TREB".
Press the
or button 7 to adjust the treble. When the settings have been completed,
press the AUD button 9.
Loudness
Loudness means the bass levels are aurally compensated, i.e. they are increased at lower volume levels.
Press the AUD button 9.
"AUDIO 1" appears on the display.
Press the soft key 4 with the display
allocation "LOUD".
Press the
or the loudness.
button 7 to adjust
47
AUDIO SETTINGS
If you want to deactivate the loudness function,
DISPLAY
Setting the display
You can adjust the display to your needs and the position of the car radio in your vehicle.
press the
button 7.
"LOUD OFF" appears on the display. When the settings have been completed,
Setting the reading angle
Press the MENU button 8. Press the soft key 4 with the display
allocation "DISP".
press the AUD button 9.
Setting the right/left balance
To set the balance, press the AUD button 9. "AUDIO 1" appears on the display.
Press the soft key 4 with the display
allocation "ANGL".
Set the reading angle using the
buttons 7.
or
Press the soft key 4 with the display
allocation "BAL".
Press the OK button 5 to return to the
previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored.
Press the
or button 7 to adjust the right/left balance. When the settings have been completed,
press the AUD button 9.
Setting the display brightness
If your car radio has been connected as described in the instructions, the display brightness will be activated when you turn on the headlights. The display brightness can be set separately in stages from 1 - 9 for day and night. Display brightness - day
Fader settings, front/back
To set the fader, press the AUD button
9. "AUDIO 1" appears on the display.
Press the soft key 4 with the display
allocation "FADE".
Press the
or button 7 to adjust the front/back fader. When the settings have been completed,
Press the MENU button 8. Press the soft key 4 with the display
allocation "DISP".
press the AUD button 9.
Press the soft key 4 with the display
allocation "DAY".
Set the brightness using the
7.
button
Press the OK button 5 to return to the
previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored.
48
DISPLAY
Display brightness - night
RADIO MODE
This unit is equipped with an RDS radio receiver. Many of the receivable FM stations transmit a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). The station name appears on the display as soon as it is received. The programme type can be displayed if required. Read the section entitled "Programme Type (PTY)" for further details.
DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH
Radio mode
Press the MENU button 8. Press the soft key 4 with the display
allocation "DISP".
Press the soft key 4 with the display
allocation "NGHT".
Set the brightness using the
7.
button
Press the OK button 5 to return to the
previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored.
Switching on radio mode
If you are in CD, cassette, MiniDisc (depending on your car radio) or CD changer mode:
Press the TUNE button >.
RDS function (AF, REG)
The RDS functions AF (Alternative Frequency) and REG (Regional) extend your radio's range of functions. AF: If this RDS function is activated, the unit automatically carries out a background search for the best receivable frequency for the station that is currently set. REG: Some radio stations set aside some of their broadcasting time for regional programmes that provide different regional content. With the REG function, your car radio is prevented from switching to alternative frequencies with a different regional content. Note: REG has to be specially activated/deactivated in the unit's menu.
49
RADIO MODE
Switching the RDS function on/off To use the RDS functions AF and REG, Selecting the wavelength To select the wavelength, FM, MW or LW,
press the TUNE button > when in radio
mode. The radio function menu appears on the display.
press the TUNE button > when in radio
mode. The radio function menu appears on the display.
Press the soft key 4 with the display
allocation "RDS". The RDS functions are active when "RDS" lights up on the display. To return to the basic radio menu,
Press the soft key 4 with the display
allocation "FM" for the FM wavelength.
Press the soft key 4 with the display
allocation "AM" for the MW and LW wavelengths. To return to the basic radio menu,
press the TUNE button > or wait 8 seconds. The settings are now stored. Switching REG on/off To use the RDS function REG,
press the TUNE button > or wait 8 seconds. The settings are now stored. Selecting the FM memory To switch between the FM memory levels, FM1, FM2, FM3 or FMT,
press the TUNE button > when in radio
mode. The radio function menu appears on the display.
press the soft key 4 with the display
allocation "NEXT" repeatedly when in FM radio mode until the desired memory level appears on the display. The memory levels are called up in the following order: FM1, FM2, FM3, FMT. Selecting MW or LW To select an AM wavelength, MW or LW,
Press the soft key 4 with the display
allocation "NEXT". The "second page" of the radio function menu appears on the display.
Press the soft key 4 with the display
allocation "REG". When the REG function is switched on or off, "REG ON" or "REG OFF" appears on the display. When the REG function is activated, an arrow symbol lights up alongside "REG".
first of all select the AM wavelength; press the soft key 4 with the display
allocation "NEXT" repeatedly until the desired wavelength, MW or LW, appears on the display.
Press the TUNE button > or wait
8 seconds. The settings are now stored.
Tuning into a station Selecting the frequency range/ memory
This unit can receive programmes broadcast over the FM as well as MW and LW (AM) frequency ranges. There are four preset memory levels for the FM range and one each for the MW and LW ranges. Six stations can be stored on each memory level. 50 There are various methods available for tuning into a station. Automatic station search mode
Press the
or
button 7.
The unit tunes into the next receivable station.
RADIO MODE
press the TUNE button > or wait 8 seconds. The settings are now stored.
DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH
Tuning into stations manually You can also tune into stations manually.
To return to the basic radio menu,
Press either the
or
button 7.
Note: You can only tune into stations manually if the RDS function is first deactivated. Browsing through broadcasting networks (only FM) If a radio station provides several programmes, you have the option of browsing through its so-called "broadcasting network".
Setting the sensitivity of the station search mode
You can set the sensitivity of short and longrange reception for AM and FM separately. Short-range reception sensitivity (S-LO)
Press the MENU button 8. Press the soft key 4 with the display
allocation "TUN".
Press the
or button 7 to move to the next station on the broadcasting network.
Press the soft key 4 with the display
allocation "S-LO".
Note: If you want to use this feature, the RDS function must first be activated. You will then only be able to switch to stations that you have received once already. To do so, use the Scan or Travelstore function.
Use the
buttons 7 to choose between setting the sensitivity for the AM or FM wavelength.
Selecting short/long-range reception
You can choose whether you wish to select only short-range or also long-range stations.
or buttons 7 to set the sensitivity. The display shows the currently set value for sensitivity. "LO 3" denotes maximum sensitivity for short-range reception. "LO 1" is the minimum.
Press the
Press the OK button 5 to return to the
previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored. Long-range reception sensitivity (S-DX)
Press the TUNE button > when in radio mode. The radio function menu appears on the display.
Press the soft key 4 with the display
allocation "NEXT". The "second page" of the radio function menu appears on the display.
Press the MENU button 8. Press the soft key 4 with the display
allocation "TUN".
Press the soft key 4 with the display
allocation "S-DX".
Press the soft key 4 with the display
allocation "LOC". The current status "LOCAL" (short-range reception) or "DISTANCE" (long-range reception) appears briefly on the display. When "LOCAL" is activated, an arrow symbol lights up alongside "LOC".
Use the
buttons 7 to choose between setting the sensitivity for wavelength AM or FM. or buttons 7 to set the
Press the
sensitivity.
51
RADIO MODE
The display shows the currently set value for sensitivity. "DX 3" denotes maximum sensitivity for long-range reception. "DX 1" is the minimum.
Listening to preset stations
Select the memory or frequency range
in which the station was stored.
Press the MENU button 8 once or OK
5 repeatedly until the desired menu appears on the display. The settings are now stored.
Press the soft key 4 with the display
allocation of the name of the desired station.
Scanning stations
Scanning receivable stations (RadioSCAN) You can briefly listen in to all receivable stations. The scanning time can be set in the menu at between 5 and 30 seconds. Starting Radio-SCAN To start the Radio-SCAN function,
Storing stations
Storing stations manually
Select the required FM memory level,
FM1, FM2, FM3, FMT or either wavelength MW or LW.
Tune into the desired station as described under "Tuning into a station".
Hold down one of the six soft keys 4
on which you wish to store the station for more than two seconds.
press the TUNE button > when in radio
mode. The radio menu function appears on the display.
Storing stations automatically (Travelstore)
You can automatically store the six stations with the strongest reception in the region (only FM). The stations are stored in the FMT memory. Note: Stations that were previously stored in this memory are deleted in the process. To use the Travelstore function,
Press the soft key 4 with the display
allocation "SCAN". The scanning process begins. The next receivable station is briefly played. The stations are scanned in ascending order. Scanning stored stations (Preset Scan) You can listen in to all currently receivable stations on all memory levels. The scanning time can be set in the menu at between 5 and 30 seconds. Starting preset scan To start preset scan,
press the TUNE button > when in radio
mode. The radio function menu appears on the display.
press the TUNE button > when in radio
mode. The radio function menu appears on the display.
Press the soft key 4 with the display
allocation "TS". The automatic station storing procedure begins. "T-STORE" appears on the display. After the process is completed, the station stored in FMT memory location 1 is played.
Press the soft key 4 with the display
allocation "PS". The scanning process begins. The memory levels are scanned consecutively beginning with memory level FM1. An arrow symbol
52
RADIO MODE
DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH
lights up alongside the scanned memory position. Ending SCAN, continuing to listen to a station
Press the OK button 5.
The scanning process is completed, the station last scanned remains active.
tion of the selected programme type is received, the unit automatically switches from the current station, CD or CD changer mode to the station with the selected programme type. Switching PTY on/off To use the PTY function,
press the TUNE button > when in radio
mode. The radio function appears on the display.
Setting the scanning time
Press the MENU button 8. Press the soft key 4 with the display
allocation "VAR".
Press the soft key 4 with the display
allocation "NEXT". The "second page" of the radio function menu appears on the display.
Press the soft key 4 with the display
allocation "SCAN". or button 7 repeatedly until the desired scanning time appears on the display. Press the MENU button 8 once or OK 5 repeatedly until the desired menu appears on the display. The settings are now stored.
Press the
Press the soft key 4 with the display
allocation "PTY". "PTY" appears on the display.
Press the TUNE button > or wait
8 seconds. The settings are now stored. Selecting programme type and starting a search
Note: The set scanning time also applies to scanning in the CD, cassette, MiniDisc (depending on your car radio) and CD changer mode.
Press the
or
button 7.
Programme type (PTY)
Besides transmitting the station name, some FM stations also provide information on the type of programme they are broadcasting. This information can be received and displayed by your car radio. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS You can use the PTY function to select stations of a particular programme type. When a PTY search has been started and no station has been found, the search is continued in the background. As soon as a sta-
The current programme type appears on the display. If you would like to select a different programme type,
press the
buttons 7 repeatedly until the desired programme type is displayed.
Or to select a preset programme type,
press the soft key 4 with the display
allocation of the desired programme type; or button 7 to start the search. The next station corresponding to your selected programme type will be tuned into.
press the
53
RADIO MODE
Note: If no station corresponding to the selected programme type is found, "NO PTY" appears briefly on the display. The unit then tunes in automatically to the station last received. Storing the programme type on the station buttons or button 7 to select a programme type. To store a programme type,
Optimising radio reception
High-frequency cut-off feature (HICUT) The HiCut function improves the sound during poor radio reception. If interference occurs, the treble is automatically reduced and thus also the interference level. Switching HiCut on/off To switch HiCut on or off,
Use the
hold down for more than one second
one of the soft keys 4 with the display allocation of a programme type. The programme type is now stored in the selected position. Selecting a PTY language You can set the language in which you wish the programme type to appear.
press the MENU button 8; press the soft key 4 with the display
allocation "TUN";
press the soft key 4 with the display
allocation "HCUT";
press the
or
button 7.
When HiCut is deactivated, "NO HICUT" appears on the display.
Press the OK button 5 to return to the
previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored. Setting the HiCut function
Press the MENU button 8. Press the soft key 4 with the display
allocation "TUN".
Press the soft key 4 with the display
allocation "PTY".
Press the
or button 7 repeatedly until the desired language, "DEUTSCH", "ENGLISH" or "FRANCAIS", appears on the display.
Press the MENU button 8. Press the soft key 4 with the display
allocation "TUN".
Press the soft key 4 with the display
allocation "HCUT".
Press the OK button 5 to return to the
previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored.
Press the
or button 7 repeatedly until the desired HICUT reduction appears on the display. "HICUT 3" denotes the largest automatic treble and interference-level reduction. previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored.
Press the OK button 5 to return to the
54
RADIO MODE
Interference-related wavelength change (SHARX) With the SHARX function you can eliminate interference from neighbouring stations almost completely. Activate the SHARX function in an area of high transmitter density. Switching SHARX on/off To switch SHARX on/off, allocation "MONO". The current status "MONO" or "STEREO" appears briefly on the display. When mono is activated, an arrow symbol lights up alongside "MONO".
DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH
Press the soft key 4 with the display
Press the TUNE button > or wait 8 seconds. The settings are now stored.
press the MENU button 8; press the soft key 4 with the display
allocation "TUN";
Changing the display
You can select the content of the display. In the top display line (lead line) you can switch between the station name, frequency, programme type and time. In the bottom display line (DOT field) you can switch between the time and the memory level.
press the soft key 4 with the display
allocation "SHRX". The current status, "SHARX ON" or "NO SHARX", appears briefly on the display. When SHARX is activated, an arrow symbol lights up on the display alongside "SHRX".
Press the DIS button : repeatedly until
the desired information - station name, frequency, programme type or time - appears in the lead line.
Press the OK button 5 to return to the
previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored.
Selecting radio text display
Some radio stations use the RDS signal to broadcast "main texts", so-called radio texts. You can allow or block the display of radio text.
Switching between stereo and mono
When radio reception is poor, you can select the mono radio mode. The transition from stereo to mono is gradual and the car radio will revert to the stereo mode when switched on once again.
Press the TUNE button > when in radio
mode. The radio function menu appears on the display.
Press the TUNE button > when in radio mode. The radio function menu appears on the display.
Press the soft key 4 with the display
allocation "NEXT". The "second page" of the radio function menu appears on the display.
Press the soft key 4 with the display
allocation "NEXT". The "second page" of the radio function menu appears on the display.
Press the soft key 4 with the display
allocation "RTXT".
Press the TUNE button > or wait 8 seconds. The settings are now stored.
55
RADIO MODE
Naming a station
You have the option of giving a preset station a four-digit name to appear on the display.
Select the station name you would like
to clear by pressing the soft key 4 with the display allocation "PREV" or "NEXT" for the previous or next preset station on that memory level.
Press the MENU button 8. Press the soft key 4 with the display
allocation "TUN".
Press the soft key 4 with the display
allocation "CLR". The station name is now cleared. Resetting station names to RDS names
Press the soft key 4 with the display
allocation "NAME". This brings you to the edit mode. If the selected station is still unnamed, four underlines appear on the display. The current input position flashes.
Press the MENU button 8. Press the soft key 4 with the display
allocation "TUN".
Select the station you would like to
name by pressing the soft key 4 with the display allocation "PREV" or "NEXT" for the previous or next preset station on that memory level.
Press the soft key 4 with the display
allocation "NAME". This brings you to the edit mode.
Select the station name you would like
to reset by pressing the soft key 4 with the display allocation "PREV" or "NEXT" for the previous or next preset station on that memory level.
Use the
/ buttons 7 to select your characters. If a position remains blank, you select the underline. or button.
You can change the input position using
the
Press the soft key 4 with the display
allocation "DEF". The station name is reset to the abbreviation of the RDS station name.
Press the OK button 5 to store the
name.
Press the OK button 5 to return to the
previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored. Clearing station names
Press the MENU button 8. Press the soft key 4 with the display
allocation "TUN".
Press the soft key 4 with the display
allocation "NAME". This brings you to the edit mode.
56
TIM
DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH
TIM - Traffic Information Memory
The unit has a digital voice memory in which up to four traffic announcements with a duration of max. four minutes in all are automatically recorded. The oldest announcements are deleted depending on the space needed for the latest announcement. If an announcement is longer than four minutes, "Overflow" appears on the display at the end of four minutes to indicate that the entire announcement could not be recorded. If a new traffic announcement is made during playback of the TIM, playback is interrupted and the new announcement recorded. Traffic announcements more than four hours old when the unit is switched on are automatically deleted. Danger of damage to the remote antenna at the car wash. An automatic remote antenna stays fully extended when TIM is activated even when the car radio is switched off. Damage can be caused if the remote antenna remains extended at a car wash. Please read the section "Interrupt TIM record standby".
When TIM is switched on, the traffic announcements of a set traffic radio station are recorded for two hours after the unit is switched off.
Recording traffic announcements
When the unit is switched on, traffic announcements are automatically recorded if a traffic information station is tuned in. When the unit is switched off, traffic announcements are recorded for two hours if TIM is switched on and a traffic information station is tuned in. If, when you switch on your radio, it is tuned to a station which does not itself broadcast traffic information and the TIM function is activated, it will automatically search for a traffic information station.
Altering TIM record standby time
You can alter the time your unit is on record standby when switched off from two to 24 hours. When TIM is activated, "TIM 2 H" will always appear on the display when the car radio is switched off. In order to alter the TIM record standby time to 24 hours,
press the TIM button 6 when the car
radio is off. "TIM 24H" will appear briefly on the display. This indicates that the TIM function has been set at max 24 hours for one single occasion. A remote antenna remains extended for as long as the TIM function is activated. Each time the car radio is switched off, the record standby time is reduced to 2 hours, to protect the vehicle battery. The connected remote antenna remains extended while the TIM function is activated.
Switching TIM on/off
You can switch the TIM function on and off when the car radio is on.
Press the TIM button 6 for approx. one
second. The current status appears briefly on the display: "TIM 2H" = TIM is switched on "TIM OFF" = TIM is switched off.
57
TIM
Playback of recorded traffic announcements
Four traffic announcements can be recorded. If no announcement has been recorded, "NO TIM" will appear on the display. In order to listen to the recorded traffic announcements In order to deactivate TIM record standby,
press the TIM button 6 until "TIM OFF"
appears briefly on the display. TIM record standby is now deactivated and the antenna is pulled in (make sure to check this) and remains pulled in until the car radio is switched on again.
You can now drive into the car wash.
As soon as you switch on the radio, the TIM function is immediately reactivated and the remote antenna extended once more. Note: To prevent damage, do not switch the radio on again until you have driven out of the car wash.
press the TIM button 6. Press the soft key marked for the desired traffic announcement ("TIM1" to "TIM4"). "TIM1" is the latest announcement and will be played back first. The other traffic announcements then follow in ascending order. An arrow symbol flashes on the display alongside the traffic announcement currently being played back. The name of the station which transmitted the traffic announcement appears on the display along with the time of recording. After the last announcement has been played, the unit reverts to the previous mode. In order to continue listening to the last active audio source without listening to all traffic announcements,
press the TIM button 6.
Interrupting TIM record standby
(for the time spent at the car wash) Before you drive into the car wash,
switch the radio off.
If the display disappears immediately, TIM record standby is switched off and the remote antenna is pulled in.
You can now enter the car wash.
If, after switching off the radio, "TIM 2H" appears briefly on the display, TIM record standby is activated.
58
TRAFFIC INFORMATION
Your car radio is equipped with an RDS-EON reception system. EON (Enhanced Other Network) stands for the broadcasting of station information within a broadcasting network. When a traffic announcement (TA) is broadcast, your unit will automatically switch, within a broadcasting network, from a station which does not transmit traffic information to one that does. The unit reverts to the programme previously heard when the traffic announcement is over.
DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH
Traffic information
Setting the traffic announcement volume
Press the MENU button 8. Press the soft key 4 with the display
allocation "VAR".
Press the soft key 4 with the display
allocation "TVOL". To set the desired volume, press the or button 7 or turn the volume control;
press the OK button 5 to return to the
previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored.
Switching traffic information priority on/off
Press the soft key 4 with the display
allocation "TA". Priority for traffic announcements is activated when "TA" lights up on the display. Note: You will hear a warning tone, if you leave the reception area of a traffic information station to which you are currently tuned in; if you leave the reception area of a traffic information station when you are listening to a CD, cassette or MiniDisc (depending on your car radio) and the subsequent automatic search cannot find a new traffic information station; if you retune the radio from a traffic information station to one that does not broadcast traffic information. Either deactivate the priority for traffic information or switch to a station which broadcasts traffic information.
59
CASSETTE MODE
Cassette mode
Cassette playback
Skipping tracks (S-CPS)
To choose the next or any other track, button 7 once or several times until the number of tracks to be skipped appears on the display after "CPS FF". "CPS FF" appears on the display with the number of tracks to be skipped. The cassette is then fast forwarded to the next or corresponding later track. In order to play a previous track,
press the
If there is no cassette in the unit yet button 1.
press the
The operating panel opens at the front.
Place the cassette in the compartment
with the open side pointing right.
Close the operating panel.
The cassette begins to play the side that is facing upwards (SIDE A). If there is already a cassette in the unit,
Press the CC button <.
The cassette is played in the direction last selected.
Ejecting a cassette
Press the Press the
button 1. The operating panel opens to the front. button on the open operating panel. The cassette is ejected.
button 7 once or several times until the number of tracks to be skipped appears on the display behind "CPS FR". "CPS FR" appears on the display with the number of tracks to be skipped. The cassette is rewound to the beginning of the current or corresponding previous track.
press the
Repeating tracks
Press the soft key 4 for display allocation "RPT". The current music track is replayed. "RPT ON" appears briefly on the display and an arrow symbol appears alongside "RPT". While the tape is being rewound after the end of the track, "REWIND" appears in the display. To stop repeating the track,
Remove the cassette
or
place a new cassette in the compartment. Close the operating panel.
Changing the playing side
In order to change the direction of play between SIDE A and SIDE B,
press the softkey, 4, indicating "RPT"
again. Playback continues as usual. "RPT OFF" appears briefly on the display.
press the soft key 4 with the display
allocation "REV". Note: The direction of play changes automatically at the end of one side (Autoreverse).
60
CASSETTE MODE
Fast forward
DEUTSCH
Scanning all tracks on a cassette (SCAN)
Press the soft key 4 with display allocation "SCAN". "FORWARD" appears on the display. Now you can listen in briefly to all tracks on the cassette in ascending order. To stop scanning,
Fast forward/rewind
Press the
Fast rewind button 7.
"FORWARD" appears on the display.
Press the
button 7.
press the soft key 4 with display allocation "SCAN" once again. The track last scanned then continues to play. Notes: The scanning time is adjustable. Please read the section "Setting the scanning time" in the chapter "Radio mode". In order to be able to use the S-CPS, RPT and SCAN functions, there must be an interval of at least three seconds between the individual tracks on the cassette.
"REWIND" appears on the display.
Press the OK button 5 or the button
for the opposite direction 7. Playback is resumed. Note: During fast forward/rewind, the radio station last listened to can be heard. For this, the radio monitor function must activated.
Switching radio monitor on/off
Press the soft key 4 with the display
allocation "RM". When radio monitor is switched on, "RM" appears as an inverse display. The current status "RM ON" or "RM OFF" appears briefly on the display when switched on or off.
Changing the display
When in cassette mode, you can switch between the various display modes: Display of time played ("ELAPSED"); Display of remaining play time ("REMAIN"); Tape counter display ("COUNTER"). Display of the time ("CLOCK").
To switch between the display modes,
press the DIS button : repeatedly until the desired information appears on the display.
Resetting the counter
To reset the counter,
Activating/deactivating the blankskip function
Press the soft key 4 with the display
allocation "BLS". When blankskip is switched on, "BLS" appears as an inverse display. The current status, "BLS ON" or "BLS OFF" appears briefly on the display when switched on or off.
press the DIS button : for more than
two seconds.
61
PORTUGUÊS
If blank sections last longer than ten seconds, you can have them automatically skipped. To do this, the blankskip function must be activated.
ESPAÑOL
Skipping blank sections (Blankskip)
SVENSKA
NEDERLANDS
ITALIANO
FRANÇAIS
Stopping fast forward/rewind
ENGLISH
CASSETTE MODE
Dolby* Noise Suppression
If you are playing a cassette recorded using the Dolby B system, you should activate the Dolby function.
CD CHANGER MODE
CD changer mode (optional)
To find out which CD changer is compatible with this unit, please see page 41 of this manual or consult your Blaupunkt dealer. Note: Information on handling CDs, inserting CDs and operating the CD changer can be found in the operating instructions accompanying your CD changer.
Press the soft key 4 with the display
allocation "DLBY". When the Dolby function is switched on, an arrow symbol appears on the display alongside "DLBY".
* Noise suppression system manufactured under licence from Dolby Laboratories. The word "Dolby" and the double D symbol are the trademark of Dolby Laboratories.
Switching to CD changer mode
Press the CDC button =.
The CD changer menu appears on the display and playback is resumed at the point where it was interrupted. If the magazine has been removed from the CD changer and reinserted, the CD magazine will first be scanned. Playback then begins with the first track of the first CD the CD changer recognises.
Traffic announcements in cassette mode
With the "TRAFFIC" function (priority for traffic information), your car radio is on standby for traffic announcements even when a cassette is being played. When a traffic announcement begins, playback stops and the traffic announcement is made. For further information, please see the chapter "Traffic information".
Selecting a CD
To change up or down to a different CD,
press the soft key 4 with the display
allocation of the desired CD (CD1 CD10). To do this, if necessary press the soft key 4 with the display allocation "NEXT" to access the "second page" of the basic CD changer menu or
press the
or button 7 repeatedly until the number of the desired CD appears on the display.
Selecting a track
In order to change up or down to another track on the CD currently being played, or button 7 repeatedly until the number of the desired track appears on the display. If the button 7 is pressed once, the current track is played again from the beginning.
press the
62
CD CHANGER MODE
For a fast search backwards or forwards To stop the repeat function for the current track or CD,
DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH
Fast search (audible)
keep the
or button 7 pressed until the fast search backwards or forwards begins.
Stopping REPEAT
press the soft key 4 with the display
allocation "RPT" repeatedly until "RPT OFF" appears briefly on the display.
Changing the display
In CD changer mode, you can switch between the various display modes: display of CD number and track number; display of CD number, track number and playing time; display of time and track number. display of CD name and track number. To switch between the different display modes,
Random play (MIX)
To play the tracks on the current CD in random order,
press the CDC button = while in CD
changer mode. The CD changer function menu appears on the display.
Press the soft key 4 with the display
allocation "MIX". "MIX OFF" appears on the display.
press the DIS button : repeatedly until
the desired information appears on the display. Note: A CD name can only be displayed if a name has been allocated to the inserted CD. Please see the section "Naming CDs".
Select "MIX CD" using the
button 7.
To play all tracks of all inserted CDs in random order,
select "MIX ALL" with the
button 7.
Repeating individual tracks or whole CDs (REPEAT)
In CD changer mode, press the CDC
button =. The CD changer function menu appears on the display.
Note: In the case of CD changers CDC A 08 and IDC A 09, all CDs and all tracks in the changer are randomly selected. All other changers first play all the tracks on a CD in random selection before moving to the next CD in the changer. Stopping MIX
Select "MIX OFF" using the
7.
button
Press the soft key 4 with the display
allocation "RPT". "RPT TRCK" appears briefly on the display. To repeat play of the entire CD,
Scanning all tracks on all CDs (SCAN)
To listen in briefly to all the tracks on all inserted CDs in ascending order,
press the soft key 4 with the display
allocation "RPT" once again. "RPT CD" appears briefly on the display.
press the button CDC button = while in
CD changer mode. The CD changer menu appears on the display.
63
CD CHANGER MODE
Press the soft key 4 with the display
allocation "SCAN" "SCAN" appears in the display alongside a flashing arrow symbol. Stopping SCAN To stop scanning,
Press the OK button 5 to store the
name. Clearing a CD name
Press the MENU button 8 when in CD
changer mode.
Press the soft key 4 with the display
allocation "CDC".
press the soft key 4 with the display
allocation "SCAN" once again. The track last scanned then continues to be played. Note: You can set the scanning time as required. Please see the section "Setting the scanning time" in the "Radio mode" chapter.
Select the CD whose name you wish to
choose using the / buttons 7 or the soft keys "PREV" (previous) or "NEXT".
Hold down the soft key 4 with the display allocation "CD" until "CD CLR" appears on the display. The CD name has now been cleared.
Naming CDs
To make it easier for you to recognise your CDs, the car radio offers an individual name option for 99 CDs. The names should have a maximum of seven digits. If you attempt to allocate more than 99 names, "FULL" will appear on the display. Entering/altering CD names
Press the OK button 5 to return to the
previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored. Clearing all CD names
Press the MENU button 8 while in CD
changer mode.
Press the CDC button = when in CD
changer mode. The CD changer function menu is displayed.
Press the soft key 4 with the display
allocation "CDC".
Hold down the soft key 4 with the display allocation "ALL" until "MEMO CLR" appears on the display. All CD names have now been cleared.
Press the soft key 4 with the display
allocation "NAME".
Select the CD you wish to name using
the / buttons 7 or the soft keys 4 "PREV" (previous) or "NEXT. This brings you to the edit mode. If the CD you have selected is not yet known to the unit, seven underlines appear on the display and the current input position flashes.
Press the OK button 5 to return to the
previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored.
Programming favourite CD tracks
With the TPM function (Track Programme Memory), you can programme, store and play your favourite tracks on a particular CD. No matter what order the tracks are programmed, they will always be played back in ascending order. When playback of favourite tracks is activated, only the previously programmed
Use the
/ buttons 7 to choose your characters. Should a position remain blank, you select the underline. or button 7 to change the input position.
User the
64
CD CHANGER MODE
DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH
tracks of the CD in the drive will be played. Up to 30 CDs with a maximum of 40 tracks each can be handled in CD mode. Programming favourite tracks Proceed as follows to select your favourite tracks on a CD:
Clearing the list of favourite tracks for a CD You can also clear the entire list of favourite tracks for a CD. The CD for which you wish to clear your favourite tracks must be in play at the time of clearance.
in the CD changer mode, select the CD
from which you wish to select your favourite tracks;
Switch on TPM. Hold down the soft key 4 with the display allocation "CLR" until "CD CLR" appears briefly on the display. The list is now cleared.
choose your first favourite track; press the soft key 4 with the display
allocation "TPM" for more than one second. The track is now included in the list of favourite tracks for this CD.
Proceed in exactly the same way with
all your other favourite tracks on the CD. Switching playback of favourite tracks on/off To call up the preset favourite tracks for the inserted CD or to switch off playback of the favourite tracks,
press the soft key 4 with the display
allocation "TPM". The current TPM status ("TPM ON" or "TPM OFF") appears briefly on the display. When playback of favourite tracks is active, an arrow symbol lights up alongside "TPM" on the display. Clearing preset of tracks In order to clear individual tracks from the list of favourite tracks for a CD,
switch on TPM; select the track you wish to clear; hold down the soft key 4 with the display allocation "CLR" until "TR CLR" appears on the display. The track is now cleared from the list.
65
CLOCK
CLOCK - Time
Setting the time
The time can be set automatically using the RDS signal. If no station using this function is available, the unit attempts to receive the DCF-77 signal (radio clock) the next time the unit is switched off. It is also possible for you to set the clock manually. Setting the time automatically To set the time automatically,
Setting the time manually To set the time manually,
press the MENU button 8; press the soft key 4 with the display
allocation "CLK";
press the soft key 4 with the display
allocation "SET". The time appears on the display. The hours flash and can now be set.
Set the hours using the
7.
/
buttons
press the MENU button 8; press the soft key 4 with the display
allocation "CLK";
Once the hours have been set, press
the button 7. The minutes now flash.
press the soft key 4 with the display
allocation "SYNC" repeatedly until "AUTOSYNC" appears on the display. Once "AUTOSYNC" has been selected and a station with the RDS time function (RDSCT) or the DCF-77 signal has been received, the clock is set automatically. Or
Set the minutes using the
7.
/
buttons
Press the OK button 5 to return to the
previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored.
Hold down the DIS button : for more
than five seconds when in radio mode. Note: If it is not possible to receive a DCF-77 signal, "NO DCF" will appear briefly on the display. If you do not wish to set the time automatically (e.g. because you wish to set the clock to a different time zone),
Selecting the 12/24-hour clock mode
Press the MENU button 8. Press the soft key 4 with the display
allocation "CLK".
Press the soft key 4 with the display
allocation "MODE".
Press the
buttons 7 to switch between the 12 and 24-hour mode. previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored.
select "SYNC OFF".
Press the OK button 5 to return to the
66
CLOCK
Viewing the clock even when car radio is switched off
To view the clock when the car radio is switched off and the ignition is switched on,
EQUALIZER
This car radio is fitted with a parametric digital equalizer. In this case, parametric means that for each of the two filters, one frequency can be individually raised or lowered (GAIN +8 to - 8dB). The following filters are available: LOW EQ 32 - 500 Hz High EQ 630- 10 000 Hz These filters can be set without measuring equipment. This means that the sound quality inside the vehicle can be greatly influenced.
DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH
Equalizer
press the MENU button 8; press the soft key 4 with the display
allocation "CLK";
press the soft key 4 with the display
allocation "VIEW";
press the
buttons 7 to switch between "CLK ON" OR "CLK OFF"; previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored.
press the OK button 5 to return to the
Notes on adjusting the equalizer
We recommend you use a CD or cassette you are familiar with (depending on your car radio's capabilities) when adjusting the equalizer. Before adjusting the equalizer, set the tone and volume balance to zero and deactivate the loudness function. To do this, please see the chapter "Tone and volume balance".
Listen to a CD or cassette (depending
on your car radio's capabilities).
Evaluate the tone impression according
to your taste.
Now consult the chart "An aid to adjusting the equalizer" under "Sound impression".
Set the equalizer values as described
under "What to do".
Switching the equalizer on/off
In order to switch off the equalizer,
press the AUD button 9. Press the soft key 4 with display allocation "DEQ". The setting last selected appears on the display.
Press the
button 7.
"DEQ OFF" appears on the display. 67
EQUALIZER
Press the AUD button 9.
In order to switch off the equalizer,
Setting the quality factor of the filter
Press the AUD button 9. Press the soft key 4 with the display
allocation "DEQ".
press the AUD button 9. Press the soft key 4 with the display
allocation "DEQ". "DEQ OFF" appears on the display.
Press the soft key 4 with the display
allocation "LO Q" or "Hi Q" to select the quality factor for the LOW or HIGH filter.
Press the
button 7.
The last active setting appears on the display before the unit is switched off.
To select the quality, press the or
button 7.
Press the AUD button 9.
To select the other quality factor, press
the soft key 4 with the corresponding display allocation.
Setting the equalizer
Press the AUD button 9. Press the soft key 4 with the display
allocation "DEQ".
When all settings have been selected,
press the AUD button 9.
Press the soft key 4 with the display
allocation "LOW" or "HIGH" for the corresponding filter.
Select sound preset
You can preselect sound settings for the following musical styles: ROCK POP JAZZ CLASSIC VOCAL The settings for these musical styles are preprogrammed.
To select the frequency, press the
or 7. button 7. or button
Set the level using the
To select the other filter, press the soft
key 4 with the corresponding display allocation.
When all the settings have been selected, press the AUD button 9.
Press the AUD button 9. Press the soft key 4 with the display
allocation "DEQ".
Press the soft key 4 with the display
allocation "EQ".
Select the desired sound preset using
the or button 7.
When all the settings have been selected, press the AUD button 9.
68
EQUALIZER
Sound impression/problem Bass reproduction too weak What to do Raise bass with frequency: 32 to 160 Hz, filter: "LOW" level: +4 to +6 dB
DEUTSCH
Setting aid for the equalizer
Sound very dominant, aggressive, no stereo