Text preview for : DEH-3300R.pdf part of PIONEER DEH-3300 SERVICE MANUAL
Back to : DEH-3300R.part1.rar | Home
Service Manual
DEH-3300R/X1N/EW
ORDER NO.
CRT2574
HIGH POWER CD PLAYER WITH RDS TUNER
DEH-3300R
DEH-3330R
Model No. CX-958 Order No. CRT2423 Mech. Module S8.1
X1N/EW
X1N/EW
- This service manual should be used together with the following manual(s):
Remarks
CD Mech. Module:Circuit Description, Mech. Description, Disassembly
CONTENTS
1. 2. 3. 4. 5. 6. SAFETY INFORMATION ............................................2 EXPLODED VIEWS AND PARTS LIST .......................3 BLOCK DIAGRAM AND SCHEMATIC DIAGRAM .....8 PCB CONNECTION DIAGRAM ................................26 ELECTRICAL PARTS LIST ........................................34 ADJUSTMENT..........................................................39 7. GENERAL INFORMATION .......................................43 7.1 DIAGNOSIS ........................................................43 7.1.1 TEST MODE ..............................................43 7.1.2 DISASSEMBLY .........................................47 7.1.3 CONNECTOR FUNCTION DESCRIPTION ...51 7.2 PARTS .................................................................52 7.2.1 IC................................................................52 7.2.2 DISPLAY ....................................................57 7.3 OPERATIONAL FLOW CHART ...........................58 8. OPERATIONS AND SPECIFICATIONS.....................59
PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS SERVICE INC. P.O.Box 1760, Long Beach, CA 90801-1760 U.S.A. PIONEER EUROPE NV Haven 1087 Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE.LTD. 253 Alexandra Road, #04-01, Singapore 159936
C PIONEER CORPORATION 2000
K-ZZB. DEC. 2000 Printed in Japan
DEH-3300R,3330R
- CD Player Service Precautions
1. For pickup unit(CXX1285) handling, please refer to"Disassembly"(see page 47). During replacement, handling precautions shall be taken to prevent an electrostatic discharge(protection by a short pin). 2. During disassembly, be sure to turn the power off since an internal IC might be destroyed when a connector is plugged or unplugged. 3. Please checking the grating after changing the service pickup unit(see page 41).
1. SAFETY INFORMATION
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair complex products such as those covered by this manual. Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty. If you are not qualified to perform the repair of this product properly and safely; you should not risk trying to do so and refer the repair to a qualified service technician. 1. Safety Precautions for those who Service this Unit. · When checking or adjusting the emitting power of the laser diode exercise caution in order to get safe, reliable results. Caution: 1. During repair or tests, minimum distance of 13cm from the focus lens must be kept. 2. During repair or tests, do not view laser beam for 10 seconds or longer. 2. A "CLASS 1 LASER PRODUCT" label is affixed to the bottom of the player. 3. The triangular label is attached to the mechanism unit frame.
CLASS 1 LASER PRODUCT
4. Specifications of Laser Diode Specifications of laser radiation fields to which human access is possible during service. Wavelength = 800 nanometers
2
DEH-3300R,3330R
2. EXPLODED VIEWS AND PARTS LIST
2.1 PACKING
3 5 4
6
7 2 12 1 10
8
13 11
9
NOTE:
- Parts marked by "*" are generally unavailable because they are not in our Master Spare Parts List. - Screws adjacent to mark on the product are used for disassembly.
- PACKING SECTION PARTS LIST
Mark No. Description 1 2 3 4 5 6 7 8 9 Cord Assy Case Assy Accessory Assy Screw Handle Bush Polyethylene Bag Polyethylene Bag Carton(3300R) Carton(3330R) Part No. CDE6435 CXB3520 CEA2397 CBA1002 CNC5395 CNV3930 E36-615 CEG-162 CHG4270 CHG4271 Mark No. Description 10 Contain Box(3300R) Contain Box(3330R) 11 Protector 12 Protector 13-1 Polyethylene Bag 13-2 13-3 13-4 * 13-5 * 13-6 Owner's Manual Owner's Manual Installation Manual Passport Warranty Card Part No. CHL4270 CHL4271 CHP2251 CHP2252 CEG1116 CRD3304 CRD3305 CRD3313 CRY1013 CRY1157 CRP1241
*
*
* 13-7 Caution Card
- Owner's Manual, Installation Manual
Model DEH-3300R/X1N/EW DEH-3330R/X1N/EW Part No. CRD3304 CRD3305 CRD3313 Language English, Spanish, German French, Italian, Dutch English, Spanish, German, French, Italian, Dutch
3
DEH-3300R,3330R
2.2 EXTERIOR
C A
B
4
DEH-3300R,3330R
- EXTERIOR SECTION PARTS LIST
Mark No. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Screw Screw Screw Screw Cord Assy Cap Cable Cord Assy Fuse(10A) Case Holder Holder Cushion Insulator Panel(3300R) Part No. BMZ30P040FZK BMZ30P100FMC BSZ26P060FMC BSZ30P060FMC CDE6435 CKX-003 CDE6444 CDE6494 CEK1136 CNB2686 CNC5704 CNC8659 CNM4870 CNM6948 CNS6332 CNS6333 CWM7384 CWM7386 ASZ26P060FMC BPZ26P100FMC BSZ26P160FMC CEF1007 CKB1035 CKM1330 CKS3537 CKS3598 CKS4398 CKX1056 CNC5399 CNC8615 CNC9471 CNM6949 CNR1583 CWE1562 CNC8815 CXB6102 CXB6103 CXB6296 CXB6298 BPZ20P100FZK CAC6773 CAC6775 CAC6908 CAC6776 CAC6777 Mark No. Description 41 42 43 44 45 Button(EQ) Button(SFEQ) Button(OPEN) Badge Spring Part No. CAC6778 CAC6779 CAC6780 CAH1754 CBH2430 CBH2431 CBH2491 CNS6282 CNS6283 CNV6505 CNV6506 CWM7406 CWM7408 CAW1627 CKS4205 CNC9053 CNM6969 CNV6440 CNV6441 CXB7157 CXB7158 CAC6839 CBA1176 CBF1038 CBF1039 CBH2428 CBH2429 CBL1512 CNC9096 CNM6854 CNS6278 CNS6281 CNV6486 CNV6487 CNV6507 CNV6508 CWM7375 CKS3550 CKS4206 CXB5070 CXB6356 CXB6357 CXB6358 IMS20P045FZK CXK5201 ISS26P055FUC PAL006A 2SD2396
*
46 Spring 47 Spring 48 Cover(3300R) Cover(3330R) 49 Holder 50 Holder 51 Keyboard Unit(3300R) Keyboard Unit(3330R) 52 LCD 53 Connector(CN1901) 54 55 56 57 58 Holder Sheet Connector Lighting Conductor Sub Grille Assy(3300R) Sub Grille Assy(3330R) Button(EJECT) Screw(M2x2) Washer Washer Spring Spring Spring Holder Cover
Panel(3330R) 16 Tuner Amp Unit(3300R) Tuner Amp Unit(3330R) 17 Screw 18 Screw 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Screw Clamper Pin Jack(CN351) Plug(CN901) Plug(CN750) Connector(CN331) Connector(CN501) Antenna Jack(CN402) Holder(CN403) Holder Holder Insulator Heat Sink FM/AM Tuner Unit Holder
59 60 61 62 63 64 65 66 67
68 Panel(3300R) Panel(3330R) 69 Pin 70 Lighting Conductor 71 Gear 72 73 74 75 76 77 78 79 80 81 Arm Panel Unit Socket(CN1950) Connector(CN1951) Damper Unit Holder Unit Holder Unit Clutch Unit Screw
CD Mechanism Module(S8.1)
34 Chassis Unit(3300R) Chassis Unit(3330R) 35 Detach Grille Assy(3300R)
Detach Grille Assy(3330R)
36 Screw 37 Button(1-6) 38 Knob(VOLUME)(3300R) Knob(VOLUME)(3330R) 39 Button(FUNC/AUDIO) 40 Button(SOURCE/DISP)
82 Screw 83 IC(IC361) 84 Transistor(Q510,Q910)
5
DEH-3300R,3330R
2.3 CD MECHANISM MODULE
E
D
6
DEH-3300R,3330R
- CD MECHANISM MODULE SECTION PARTS LIST
Mark No. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 Control Unit Connector(CN802) Connector(CN801) Connector(CN701) Connector(CN101) Screw Screw Screw(M2x3) Screw(M2x5) Screw Screw(M2x4) Washer Washer Washer ····· Spring Spring Spring Spring Spring Spring ····· Spring Spring Spring Spring Spring Spring Spring Spring Bracket Spring Connector Connector Shaft Screw(M2.6x6) Frame Frame Lever Arm Bracket ····· Spacer Sheet ····· Part No. CWX2411 CKS2192 CKS2193 CKS2773 CKS3486 BMZ20P030FMC BSZ20P040FMC CBA1077 EBA1028 CBA1243 CBA1362 CBF1037 CBF1038 CBF1060 Mark No. Description 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 ····· Ball Belt Roller Arm Arm Arm Arm Guide Guide Gear Gear Guide Damper Arm Arm Arm Guide Guide ····· Guide Clamper Gear Motor Unit(M1) Screw Unit Chassis Unit Gear Unit Arm Unit Motor Unit(M2) Lever Unit Arm Unit Motor Unit(M3) Arm Unit Bracket Unit Screw Screw Washer Pickup Unit(Service)(P8) Screw PCB Photo-transistor(Q1, 2) Damper Rack Spring Part No. CNR1189 CNT1086 CNV4509 CNV6037 CNV5247 CNV5248 CNV5249 CNV5254 CNV5255 CNV5257 CNV5256 CNV6272 CNV6010 CNV6096 CNV6031 CNV6211 CNV6012 CNV5510
CBH2079 CBH2117 CBH2314 CBH2110 CBH2282 CBH2318 CBH2324 CBH2118 CBH2161 CBH2163 CBH2189 CBH2377 CBH2260 CBH2262 CNC8568 CBL1531 CDE5531 CDE5532 CLA3894 CBA1458 CNC8565 CNC8749 CNC9265 CNC8663 CNC8567 CNM3315 CNM6659
CNV5751 CNV6013 CNV5813 CXB2190 CXB5892 CXB4797 CXB4728 CXB5753 CXB2195 CXB4730 CXB4731 CXB2562 CXB4732 CXB4795 JFZ20P025FMC JGZ17P025FZK YE20FUC CXX1285 IMS26P030FMC CNX2982 CPT230SX-TU CNV6011 CNV6014 CBH2315
*
7
1
2
3
4
DEH-3300R,3330R
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM
3.1 BLOCK DIAGRAM
A TUNER AMP UNIT
A
FM/AM TUNER UNIT
AMRF
28
AMANT
FM/AM 1ST IF 10.7MHz T51 Q51 CF51 CF52 CF53
MPXREF 41kHz AMDET
Q420 Q413
Q415
Q414
ATT
IC 2 FM MPX
L ch R ch
6 5
Q411
ANT ADJ
ANT 27 7 WC 9 NC
FMANT
IC1 MIXER, IF AMP, DET.
COMP LDET
21 18 20 8
RDS DECODER
IC 481 PM4009A
11 12 X481 Q416
Q481
VDD
ATT FMRF CF202 IMG ADJ AM 2ND IF X901 450kHz 10.25MHz RF ADJ
LOCH LOCL CREQ DI/DO VDD VCC
NL2
4
CN402
11 DGND 17 NC 20 NC 24 FMLOCL 26 RFGND 23
IC 3 EEPROM
SDBW FMSD NL1 CE2 CE1 STIND
CK
SL
25
Q410
22 10
19 14
CURRQ
12 15 16 8 13 2
3
1
LOCH
LOCL
VCC
PDIO VDD
B
PICKUP UNIT(SERVICE)(P8)
LD MD LD + MD
D CONTROL UNIT
Q101 14 5 97 PD
RF-AMP,SERVO,DSP,DAC,LPF
98 LD L.OUT 16 6 LOUT
CN501
8 17
IC 201 UPD63711GC
LIMIT CLAMP S802 CLAMP
BZ610 ALARM BUZZER
HOLOGRAM UNIT 23 FOCUS ACT TRACKING ACT FO + TO + 4 3 FO + TO + X201 24 FD/TD/SD/MD
21
4
39 S801 HOME 64 53 63 78 CDLOAD CDEJET CONT EJTSNS DSCSNS CD5VON VD 79 55 57 6 96 95 29 B.U Q510 25 9 4
56 clamp CDLOAD EJECT CONT EJTSNS DSCSNS CD5VON VDCONT LCDPW DPDT KYDT ROT0 ROT1 FLPILM EJECTIN SWVDD ILMPW CSENS
100 PEE MUTE mute X1 72 37 16 X610 X2 15 81 TH601 SYSPW mut
CD DRIVER
16 18 FOP TOP
CN101
C
SPINDLE MOTOR
IC 301 BA5985FM
M
12 11 14 13 10 9
SOP SOM COP COM LOP LOM
6 5 11 22 23 7 24
19 20 14 3 2 18 1
SYSTEM CONTROLLER
IC 601(2/2) PE5202A
CARRIAGE MOTOR
M
1 2 3 4
TEMP
VCC
LOADING MOTOR
F R 28 CDEJET
1
CDLOAD
M
E PHOTO UNIT (S8)
3 1 EJECT SENSE DISC SENSE 2
MUTE 21
21 SYSPW
CN801 5V REGULATOR
VD D802 D801 V+5 4
CN701
IC 701 2 BA05SFP
1 VD 6
23
77 20
CD5VON
CN802
1 Q511 5 Q751
CN750
ILB+ 7
B.U
Q753
CSENS EJECT FILM+
4 8 5
VDD S750
DETACH SENSE SW
B.U SW5V Q750
10
D
Q752 FILM-- DPDT KYDT Q754 B.U ROT1 ROT0 BL+B Q755 6 11 14 12 13 2
8 1 2 3 4
5
6
7
8
DEH-3300R,3330R
RESET
1
A
2 VDD VDD Q913 B.U
IC 603 S-80834ANY
VDD 11 reset 48 adpw 22 tmute Q610
6 Q909
1 5 B.U
CN901
BACK UP GND BACK UP 15 16 15 16 GND
VDD
42
AVREF fM/AM
83 10 93 Q914 B.U Q915 ACC ACC
SYSTEM CONTROLLER
IC 601(1/2) PE5202A
DALMON bsens
asens
92
88 47 32 38 39 46 49 50 51 74 75 97 98 99
13
13
ldet NL2DT pce@ SD st currq SDBW LOCL LOCH SL NL1 PCK PDO PCE1 TELIN 7 isens 8 Q917 ILM 11 11 ILM
CELLULAR MUTE
Q916 TEL 10 10 MUTE
B
ELECTRONIC VOLUME/ SOURCE SELECTOR
41 TUN L
POWER AMP
10 11 14 12 FLIN RLIN RL-- 3 5 23 21 RL-- RL+ FL-- FL+ B.REM 7 5 8 6 12 7 5 8 6 12 RL-- RL+ FL-- FL+ B.REM
IC 301 PML008A
42 CD L MUTE 20
Fout L Rout L
IC 361 PAL006A
STBY 4 SYSPW B.REM 25
RL+ FL-- FL+
MUTE 22
VCC
CN331
1 Q362 mute Q361 Q341 2 FRONT BACK UP ILL B.REM GND ACC Q911 RR-- RR+ FR-- FR+ FL-- FL+ RL-- RL+
C
Q910 VCC 1 W Q918
B.U
CN351
Lch SYSPW Q912 Q359 Q351 REAR/SW
B PANEL UNIT
CN1950 CN1951
7 4 9
C KEYBOARD UNIT
CN1901
IL+B
4 8 5 10
EJECT SENSE SW S1950
3 6
10 7
CSENS µGND
5
8
SW5V
D
23 6 11 14 12 13 2 10 8 7 9 2 3 5 6 4 11 DPDT KYDT S1922 RDT1 RDT0 Q1905 BL+B 2 X1901 X1 DIMMER 7 D1917 D1918 9 DPDT 8 KYDT 3 X0 VDD
KEY MATRIX LCD DRIVER
IC 1903 PD6294A
LCD DATA KEY DATA
LCD
9 5 6 7 8
1
2
3
4
DEH-3300R,3330R
3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE)
Note: When ordering service parts, be sure to refer to "EXPLODED VIEWS AND PARTS LIST" or "ELECTRICAL PARTS LIST".
A
A-a
A-a A-b
Large size SCH diagram
FM/AM TUNER UNIT
FM(100%):-15.5dBs AM(30%): -26dBs
R455 0R0
A-a
A-b
Guide page
A-a
A-b
Detailed page
B
ANTENNA
DSP-201M
PE
SYSTEM
C
DETACH
R789
C KEYBOARD UNIT
R788
EJECT SENSE SW
R787 4
IMH3A
CN701
CL220PGC
R784 392 (1/10W)
D CONTROL UNIT
C799
CN1901
D
B PANEL UNIT
CD:+4.1dBs
For resistors and capacitors in the circuit diagrams, their resistance values or capacitance values are expressed in codes: Ex. *Resistors Code Practical value 123 12k ohms 103 10k ohms *Capacitors Code Practical value 103 0.01uF 101/10 100uF/10V
473
The the The iden
10
A B
1
2
3
4
5
6
7
8
DEH-3300R,3330R
A-b
A TUNER AMP UNIT
A
FM(100%):-15.5dBs AM(30%): -26dBs CD: +4.1dBs
IMH3A
FM(100%): +6.6dBs AM(30%): -3.9dBs CD:+10.2dBs
B
IMH3A
CD:+9.4dBs
PE5202A
600µH
M CONTROLLER
472/16
FM(100%):+32.6dBs AM(30%):+23.1dBs CD:+36.2dBs
> FUSE
CEK1136 10A
C
CH SENSE SW
DTC124EK
152 (1/4W)
Q918 2SC2412K
222 (1/10W)
R934 103 R935 223
222 (1/10W)
R786
R781
104
D320 DAN202U
HZS9L(A2)
R936
D926
472 (1/10W)
RR-- RR+ BACK UP ILL B.REM GND ACC FR-- FR+ FL-- FL+ RL-- RL+
C765 103
D
he > mark found on some component parts indicates e importance of the safety factor of the part. herefore, when replacing, be sure to use parts of entical designation.
5
6
7
A
11
8
B
D A C
12
A-a A-b
1
DEH-3300R,3330R
FM(100%):-15.5dBs AM(30%): -26dBs
FM/AM TUNER UNIT
A-a
R455 0R0
1
PE5202A
2
2
1
3
3
SYSTEM CONTROLLER
ANTENNA
DSP-201M
4
4
5
CN701
C KEYBOARD UNIT
C799
CN1901
473
CD:+4.1dBs
D CONTROL UNIT
5
DETACH SENSE SW
2
R789
222 (1/10W)
R788
222 (1/10W)
3
6
EJECT SENSE SW
R787 472 (1/10W)
6
IMH3A
4
CL220PGC
R784 392 (1/10W)
7
7 C
B PANEL UNIT
For resistors and capacitors in the circuit diagrams, their resistance values or capacitance values are expressed in codes: Ex. *Resistors Code Practical value 123 12k ohms 103 10k ohms *Capacitors Code Practical value 103 0.01uF 101/10 100uF/10V
C765 103
The > mark found the importance of t Therefore, when re identical designatio
DEH-3300R,3330R
A-a B
8
8
A-a A-b
13 B
A
D
B
D A C
14
A-a A-b
1
DEH-3300R,3330R
FM(100%):-15.5dBs AM(30%): -26dBs CD: +4.1dBs
472/16
A-b
A TUNER AMP UNIT
IMH3A
1
FM(100%): +6.6dBs AM(30%): -3.9dBs CD:+10.2dBs
IMH3A
2
600µH
2
1
3
3
CD:+9.4dBs FM(100%):+32.6dBs AM(30%):+23.1dBs CD:+36.2dBs
A
4
4
ROLLER
FM(100%):+32.6dBs AM(30%):+23.1dBs CD:+36.2dBs
>
FUSE CEK1136 10A
5
R936
D926 R934 103 R935 223
D320 DAN202U
3
0W)
Q918 2SC2412K
W)
152 (1/4W)
HZS9L(A2)
R781
104
5
DTC124EK
SW
2
6
6 B C
R786
RR-- RR+ BACK UP ILL B.REM GND ACC FR-- FR+ FL-- FL+ RL-- RL+
4
7
7
C765
103
ark found on some component parts indicates tance of the safety factor of the part. , when replacing, be sure to use parts of designation.
DEH-3300R,3330R
A-b
8
8
A-a A-b
15
A
D
1
2
3
4
DEH-3300R,3330R
3.3 KEYBOARD UNIT(DEH-3300R/X1N/EW)
A
B
TA
PURE GREEN
C
CAW1627 BAN
PURE GREEN
DOW
D
16
C
1
2
3
4
5
6
7
8
DEH-3300R,3330R
C
KEYBOARD UNIT
A
CN1951
CL170PGCD R1927 472
SFEQ
AUDIO
B
PANEL UNIT
B
FUNC
DISP
PTY
SOURCE EQ
TA
CH3
CH2
CH1
C
BAND CH6 CH5 CH4
DOWN
UP
RIGHT
LEFT
D
5
6
7
C
8
17
1
2
3
4
DEH-3300R,3330R
3.4 KEYBOARD UNIT(DEH-3330R/X1N/EW)
A
201
201
B
TA
AMBER
CAW1627
C
BAND
AMBER
DOWN
D
18
C
1
2
3
4
5
6
7
8
DEH-3300R,3330R
C
KEYBOARD UNIT
A
CN1951
201 CL170DCD R1927 472
SFEQ
AUDIO
B
PANEL UNIT
B
FUNC
DISP
PTY
SOURCE EQ
TA
CH3
CH2
CH1
C
AND CH6 CH5 CH4
WN
UP
RIGHT
LEFT
D
5
6
7
C
8
19
1
2
3
4
DEH-3300R,3330R
3.5 CD MECHANISM MODULE
A
D CONTROL UNIT
PICKUP UNIT (SERVICE)(P8)
CN101
B
RF-AMP, SE
C
CL203IRXTU
CL203IRXTU
E
PHOTO UNIT(S8)
Q1 CPT230SX-TU Q2 CPT230SX-TU
CN802
SPINDLE MOTOR
M3 CXB2562 CARRIAGE MOTOR
M1 CXB2190
D
LOADING MOTOR
CD DRIVER
M2 CXB2195
CN801
20
1
D E
BA05SFP
5V REGULATOR
3 4
2
5
6
7
8
DEH-3300R,3330R
A
SWITCHES: CONTROL UNIT S801 : HOME SWITCH.....ON-OFF S802 : CLAMP SWITCH....ON-OFF The underlined indicates the switch position.
NOTE : Symbol indicates a resistor. No differentiation is made between chip resistors and discrete resistors. Symbol indicates a capacitor. No differentiation is made between chip capacitors and discrete capacitors.
B
MP, SERVO, DSP, DAC, LPF
Decimal points for resistor and capacitor fixed values are expressed as : 2.2 2R2 0.022 R022
16.934MHz
CN701
C
A CN501
D 5 6 7
D
21
8
DEH-3300R,3330R
Note:1. The encircled numbers denote measuring pointes in the circuit diagram. 2. Reference voltage REFO:2.5V 1 CH1: RFI 1V/div. 0.5ms/div. 2 CH2: MIRR 5V/div. Test mode: Tracking open 1 CH1: RFI 1V/div. 0.5ms/div. 2 CH2: MIRR 5V/div. Normal mode: The defect part passes 800µm
- Waveforms
1 RFI 0.5V/div. 0.5µs/div. Normal mode: play
REFO REFO REFO REFO REFO
3 CH1: FD 0.5V/div. 0.2s/div. 4 CH2: FO+ 2V/div. Test mode: No disc, Focus close
3 CH1: FD 0.5V/div. 0.2s/div. 5 CH2: FOK 2V/div. Normal mode: Focus close
6 CH1: FE 0.5V/div. 1ms/div. 7 CH2: XSI 2V/div. Normal mode: Focus close
REFO REFO
REFO
REFO REFO REFO GND
8 CH1: TE 0.5V/div. 0.5ms/div. 9 CH2: TD 0.5V/div. Test mode: 32 tracks jump (FWD)
8 CH1: TE 0.5V/div. 0.5ms/div. 9 CH2: TD 0.5V/div. Test mode: Single jump (FWD)
8 CH1: TE 0.5V/div. 5ms/div. 9 CH2: TD 0.5V/div. Test mode: 100 tracks jump (FWD)
REFO
REFO
REFO
REFO
REFO
REFO
6 CH1: FE 0.1V/div. 3 CH2: FD 0.2V/div. Normal mode: Play
20ms/div.
3 CH1: FD 0.5V/div. 0.5s/div. 0 CH2: MD 1V/div. Normal mode: Focus close (12cm)
3 CH1: FD 0.5V/div. 0.5s/div. 0 CH2: MD 1V/div. Normal mode: Focus close (8cm)
REFO REFO
REFO
REFO
REFO
REFO
22
DEH-3300R,3330R
8 CH1: TE 0.2V/div. 9 CH2: TD 0.2V/div. Normal mode: play
20ms/div.
8 CH1: TE 0.5V/div. 5ms/div. ! CH2: SD 0.5V/div. TEST mode: 100 Tracks jump(FWD)
0 MD
0.5V/div.
0.1s/div.
Normal mode: Play (12cm)
REFO REFO REFO
REFO
REFO
0 MD 1V/div. Normal mode: Long Search (12cm)
10ms/div.
@ EFM
1V/div.
5µs/div.
Normal mode: play
8 CH1: TE 1V/div. 2ms/div. # CH2: TEC 1V/div. Test mode: Focus close Tracking open
REFO REFO REFO REFO GND
8 CH1: TE 0.5V/div. 0.2s/div. 6 CH2: FE 0.5V/div. Normal mode: AGC after focus close
$ PLCK
2V/div.
0.5µs/div.
% SCKO
2V/div.
1µs/div.
Normal mode: play
Normal mode: play
REFO
REFO
REFO GND
REFO GND
^ Dout
2V/div.
10µs/div.
& LRCK
2V/div.
20µs/div.
* VD
5V/div.
50ms/div.
Normal mode: play
Normal mode: play
Normal mode: No disc
GND REFO GND REFO GND
23
DEH-3300R,3330R
( CH1: R OUT 1V/div. 0.2ms/div. ) CH2: L OUT 1V/div. Normal mode: Play (1kHz 0dB)
6 CH1: FE 0.2V/div. 1ms/div. 3 CH2: FD 0.5V/div. Normal mode: During AGC
8 CH1: TE 0.2V/div. 1ms/div. 9 CH2: TD 0.5V/div. Normal mode: During AGC
REFO REFO REFO
REFO
REFO
REFO
1 CH1: RFI 1V/div. 0.5ms/div. / CH2: HOLD 5V/div. Normal mode: The defect part passes 800µm(B.D)
3 CH1: FD 0.5V/div. 0.5ms/div. / CH2: HOLD 5V/div. Normal mode: The defect part passes 800µm(B.D)
9 CH1: TD 0.1V/div. 0.5ms/div. / CH2: HOLD 5V/div. Normal mode: The defect part passes 800µm(B.D)
REFO
REFO
REFO
REFO
REFO
REFO
24
DEH-3300R,3330R
25
1
2
3
4
DEH-3300R,3330R
4. PCB CONNECTION DIAGRAM
4.1 TUNER AMP UNIT
A
CORD ASSY
NOTE FOR PCB DIAGRAMS
1. The parts mounted on this PCB include all necessary parts for several destination. For further information for respective destinations, be sure to check with the schematic diagram. 2. Viewpoint of PCB diagrams
15 16
13 14
11 12
9 10
7 8
5 6
3 4
1 2
Connector
Capacitor
SIDE A
B
P.C.Board
Chip Part
SIDE B
A
TUNER AMP UNIT
C
D
D
CN701
DETACH SENSE SW
26
A
1
2
3
4
5
6
7
8
DEH-3300R,3330R
SIDE A
CORD ASSY REAR OUTPUT
A
ANTENNA JACK
B
FM/AM TUNER UNIT
C
D
B
FRONT
5 6
CN1950
7
A
8
27
1
2
3
4
DEH-3300R,3330R
A
A TUNER AMP UNIT
4 5 6
3 2 1
B
6 5 4 1 2 3
6 5 4
1 2 3
1 2 3
6 5 4
C
D
28
A
1
2
3
4
5
6
7
8
DEH-3300R,3330R
SIDE B
A
B
4 5 6
3 2 1
C
4 5 6
3 2 1
D
5
6
7
A
8
29
1
2
3
4
DEH-3300R,3330R
4.2 PANEL UNIT
A
SIDE A
SIDE B
C
CN1901
B
A
CN750
C
B PANEL UNIT
D
30
B
1
2
B PANEL UNIT
3
EJECT
4
C KEYBOARD UNIT
5 3 1
1
4.3 KEYBOARD UNIT
1
SFEQ
2 4 6 2 4 6 1 3 5 6 4 2 6 4 2 5 3 1 1 3 5
EQ
SOURCE
DISP
1 3 BAND PTY
2 4 TA
5 6
AUDIO FUNC
2
2
SIDE A
C KEYBOARD UNIT
B
CN1951
3
3
DEH-3300R,3330R
C
B C A
4
4
SIDE B
31
D
B
D A C
32
D
PICKUP UNIT(SERVICE)(P8) M1 CARRIAGE MOTOR M2 LOADING MOTOR
HOME
CONTROL UNIT
1
DEH-3300R,3330R
4.4 CD MECHANISM MODULE
1
D E
M3 SPINDLE MOTOR
2
2
E
3
3
E PHOTO UNIT(S8)
A CN501
4
4
3 2 1
SIDE A
D CN802
1
2
3
4
DEH-3300R,3330R
SIDE B
A
CLAMP
B
C
CONTROL UNIT
D
D
D
1 2 3 4
33
DEH-3300R,3330R
5. ELECTRICAL PARTS LIST
NOTES: - Parts whose parts numbers are omitted are subject to being not supplied. - The part numbers shown below indicate chip components. Chip Resistor RS1/_S___J,RS1/__S___J Chip Capacitor (except for CQS.....) CKS....., CCS....., CSZS.....
=====Circuit Symbol and No.===Part Name --- ----------------------------------------------Part No. ------------------------=====Circuit Symbol and No.===Part Name --- ----------------------------------------------D D D D D D D D D D L L L L L L L L L L L L TH X X S BZ AR 911 912 913 914 915 916 919 920 925 926 311 361 410 411 412 481 482 489 612 621 750 910 610 481 610 750 610 410 Diode Diode Diode Diode Diode Diode Diode Diode Diode Diode Ferri-Inductor Choke Coil 600µH Ferri-Inductor Ferri-Inductor Ferri-Inductor Inductor Ferri-Inductor Inductor Inductor Inductor Ferri-Inductor Ferri-Inductor Thermistor Crystal Resonator 3.648MHz Radiator 12.5829MHz Switch(DETACH SENSE) Buzzer Arrester FM/AM Tuner Unit Part No. ------------------------HZS6L(B2) S5688G HZS7L(C2) HZS7L(A1) 1SS270 1SS270 S5688G S5688G 1SS270 HZS9L(A2) LAU4R7K CTH1221 LAU4R7K LAU2R2K LAU2R2K LAU100K LAU101K CTF1346 LAU100K CTF1346 LAU2R2K LAU2R2K CCX1037 CSS1447 CSS1495 CSN1039 CPV1050 DSP-201M CWE1562
A
IC IC IC IC IC Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q Q D D D D D D D D D D D D D
Unit Number : CWM7384(DEH-3300R/X1N/EW) Unit Number : CWM7386(DEH-3330R/X1N/EW) Unit Name : Tuner Amp Unit
301 361 481 601 603 341 351 359 361 362 410 411 413 414 415 416 420 481 510 511 610 750 751 752 753 754 755 909 910 911 912 913 914 915 916 917 918 320 361 362 510 750 751 752 753 754 755 762 763 910 IC IC IC IC IC Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Transistor Diode Diode Diode Diode Diode Diode Diode Diode Diode Diode Diode Diode Diode PML008A PAL006A PM4009A PE5202A S-80834ANY IMH3A IMH3A DTA124EK DTC124EK DTC114EK 2SC2412K 2SC2412K DTA114EK 2SD1757K 2SD1757K 2SC2412K RN1610 DTA124EK 2SD2396 RN46A1 DTA114EK 2SA1037K 2SA1036K DTC114EK DTC114EK 2SA1037K DTC114EK RN46A1 2SD2396 2SB1243 DTC114EK 2SD1760F5 2SC2412K 2SC2412K 2SA1037K 2SC2412K 2SC2412K DAN202U S5688G S5688G HZS9L(B1) 1SS270 1SS270 DAP202U DAN202U DAP202U DAN202U DAN202U DAP202U HZS9L(B3)
MISCELLANEOUS
RESISTORS
R R R R R R R R R R R R R R R R R R R R R R R R R 311 312 313 314 327 328 341 342 343 344 351 352 353 354 361 362 363 364 365 409 410 411 412 413 414 RS1/16S101J RS1/16S101J RS1/16S101J RS1/16S101J RS1/16S222J RS1/16S222J RS1/16S223J RS1/16S821J RS1/16S821J RS1/16S223J RS1/16S821J RS1/16S821J RS1/16S223J RS1/16S223J RS1/16S103J RS1/16S103J RS1/16S331J RS1/16S153J RD1/4PU182J RS1/16S0R0J RS1/16S222J RS1/16S222J RS1/16S681J RS1/16S473J RS1/16S473J
34
DEH-3300R,3330R
=====Circuit Symbol and No.===Part Name --- ----------------------------------------------R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 439 440 441 442 443 444 445 446 447 448 449 450 454 455 481 482 483 484 485 486 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 528 531 532 534 535 536 610 611 612 613 614 615 616 620
Part No. ------------------------RS1/16S393J RS1/16S681J RS1/16S681J RS1/16S681J RS1/16S681J RS1/16S103J RS1/16S681J RS1/16S473J RS1/16S472J RS1/16S473J RS1/16S102J RS1/16S473J RS1/16S153J RS1/16S681J RS1/16S681J RS1/16S681J RS1/16S473J RS1/16S473J RS1/16S474J RS1/16S473J RS1/16S472J RS1/16S222J RS1/16S222J RS1/16S223J RS1/16S223J RS1/16S224J RS1/16S224J RS1/16S162J RS1/16S162J RS1/16S272J RS1/16S272J RS1/16S224J RS1/16S681J RS1/16S0R0J RS1/16S0R0J RS1/16S102J RS1/16S225J RS1/16S681J RS1/16S102J RS1/16S102J RS1/16S102J RD1/4PU221J RD1/4PU221J RS1/16S472J RS1/16S222J RS1/16S473J RS1/16S473J RS1/16S473J RS1/16S222J RS1/16S222J RS1/16S222J RS1/16S681J RS1/16S102J RS1/16S0R0J RS1/16S102J RS1/16S0R0J RD1/4PU0R0J RS1/16S0R0J RS1/16S0R0J RS1/16S0R0J RS1/16S0R0J RS1/16S0R0J RS1/16S473J RS1/16S473J RS1/16S2202F RS1/16S102J RS1/16S821J RS1/16S102J RS1/16S0R0J RS1/16S473J
=====Circuit Symbol and No.===Part Name --- ----------------------------------------------R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R R 621 622 624 625 630 631 750 751 752 753 754 756 757 758 759 760 763 764 765 766 767 768 769 771 773 774 775 776 777 778 779 781 782 783 784 786 787 788 789 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936
Part No. ------------------------RS1/16S331J RS1/16S101J RS1/16S104J RS1/16S0R0J RAB4C102J RS1/16S0R0J RS1/16S104J RS1/16S103J RS1/16S153J RS1/16S153J RS1/16S222J RS1/16S433J RS1/16S473J RS1/16S102J RD1/4PU222J RS1/16S102J RS1/16S222J RS1/16S131J RS1PMF390J RS1/10S270J RS1/16S103J RS1/16S152J RS1/16S152J RS1/16S473J RD1/4PU222J RS1/16S102J RS1/16S102J RS1/16S220J RS1/16S0R0J RS1/16S103J RS1/16S472J RS1/16S104J RS1/16S131J RS1/16S131J RS1/10S392J RS1/16S102J RS1/10S472J RS1/10S222J RS1/10S222J RD1/4PU0R0J RS1/16S0R0J RD1/4PU121J RS1/16S102J RD1/4PU102J RS1/16S103J RS1/16S222J RS1/16S133J RS1/16S104J RS1/16S104J RS1/16S223J RS1/16S473J RS1/16S103J RS1/16S473J RD1/4PU102J RS1/16S472J RD1/4PU153J RS1/16S472J RS1/16S102J RS1/16S473J RS1/16S104J RS1/16S103J RS1/16S103J RD1/4PU102J RS1/16S473J RS1/16S103J RS1/16S223J RD1/4PU152J
35
DEH-3300R,3330R
=====Circuit Symbol and No.===Part Name --- ----------------------------------------------Part No. ------------------------=====Circuit Symbol and No.===Part Name --- ----------------------------------------------C C C C C C C C C C C C C C C C C C C C 621 624 629 630 631 632 633 634 750 751 765 799 910 911 912 913 914 915 916 920 Part No. ------------------------CCSRCH101J50 CKSRYB223K25 CCSRCH101J50 CKSRYB103K50 CCSRCH101J50 CCSRCH101J50 CKSRYB103K50 CKSRYB472K50 CKSRYB103K25 CKSQYB104K16 CKSQYB103K50 CKSQYB473K16 CCH1326 CKSRYB103K25 CEJA101M16 CEJA101M10 CKSRYB473K16 CKSRYB103K25 CCH1331 CKSRYB104K16
CAPACITORS
C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C 310 311 312 314 315 316 317 318 319 320 321 325 326 328 329 342 343 351 352 361 362 363 364 365 366 367 368 369 370 371 373 374 375 410 412 413 414 415 418 419 420 421 422 423 424 425 426 481 482 483 484 485 486 487 488 489 510 511 512 615 616 617 618 619 620 CKSRYB102K50 CEJA1R0M50 CEJA1R0M50 CKSRYB105K6R3 CKSRYB105K6R3 CKSRYB104K16 CKSRYB104K16 CKSRYB105K6R3 CKSRYB105K6R3 CKSRYB105K6R3 CKSRYB105K6R3 CKSRYB102K50 CEJA100M16 CKSRYB104K16 CEJA470M10 CEJA2R2M50 CEJA2R2M50 CEJA2R2M50 CEJA2R2M50 CCH1367 CKSQYB104K16 CKSQYB474K16 CKSQYB474K16 CKSQYB474K16 CKSQYB474K16 CKSQYB474K16 CKSQYB474K16 CKSQYB474K16 CKSQYB474K16 CEJA330M10 CKSQYB225K10 CKSQYB225K10 CEJA100M16 CKSQYB103K50 CKSRYB223K25 CKSRYB102K50 CEJA220M10 CKSRYB223K25 CEAL101M10 CKSRYB473K16 CKSRYB472K50 CKSRYB223K25 CEJA1R0M50 CEJA1R0M50 CKSRYB123K25 CKSRYB123K25 CKSRYB182K50 CCSRCH471J50 CKSRYB104K16 CKSRYB471K50 CKSRYB104K16 CEAL220M6R3 CCSRCH270J50 CCSRCH270J50 CKSRYB104K16 CEAL220M6R3 CKSRYB473K16 CKSRYB102K50 CEJA101M16 CEAL2R2M50 CCSRCH270J50 CCSRCH330J50 CKSRYB105K6R3 CEAL4R7M35 CKSRYB103K50
330µF/16V
470µF/16V
4700µF/16V
CWM7406 C Unit Number :: Keyboard (DEH-3300R/X1N/EW) Unit Name Unit
MISCELLANEOUS
IC Q D D D D D X S S S S S S S S S S S S S S S S S S S S 1903 1905 1901 1902 1903 1917 1918 1901 1901 1902 1903 1904 1905 1906 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1922 IC Transistor Chip Diode Chip Diode LED LED LED Radiator 5.00MHz Push Switch Push Switch Push Switch Push Switch Switch Push Switch Switch Switch Switch Switch Switch Switch Switch Switch Push Switch Push Switch Push Switch Push Switch Push Switch Switch LCD PD6294A DTC114EU MA151WK MA151WA CL170PGCD NSSW440-9159 NSSW440-9159 CSS1423 CSG1112 CSG1112 CSG1112 CSG1112 CSG1107 CSG1112 CSG1107 CSG1107 CSG1107 CSG1107 CSG1107 CSG1107 CSG1107 CSG1107 CSG1112 CSG1112 CSG1112 CSG1112 CSG1111 CSD1061 CAW1627
RESISTORS
R R R R R R R R R R R R R R R 1900 1901 1902 1903 1904 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 RS1/16S473J RS1/10S222J RS1/10S222J RS1/16S470J RS1/16S470J RS1/16S201J RS1/16S121J RS1/16S121J RS1/16S121J RS1/16S121J RS1/16S121J RS1/16S121J RS1/16S121J RS1/16S131J RS1/16S151J
36
DEH-3300R,3330R
=====Circuit Symbol and No.===Part Name --- ----------------------------------------------R R R R R R R R R R R R R R R R R 1919 1920 1927 1929 1930 1931 1933 1935 1936 1938 1939 1941 1942 1943 1945 1946 1949 Part No. ------------------------RS1/16S131J RS1/16S131J RS1/16S472J RS1/16S0R0J RS1/16S101J RS1/16S101J RS1/16S201J RS1/16S393J RS1/16S131J RS1/16S151J RS1/16S131J RS1/16S131J RS1/16S131J RS1/16S131J RS1/16S121J RS1/16S0R0J RS1/16S151J =====Circuit Symbol and No.===Part Name --- ----------------------------------------------R R R R R R R R R R R R R R R R R R R R R R 1914 1915 1916 1917 1918 1919 1920 1927 1929 1930 1931 1933 1935 1936 1938 1939 1941 1942 1943 1945 1946 1949 Part No. ------------------------RS1/16S121J RS1/16S121J RS1/16S121J RS1/16S131J RS1/16S151J RS1/16S131J RS1/16S131J RS1/16S472J RS1/16S0R0J RS1/16S101J RS1/16S101J RS1/16S201J RS1/16S393J RS1/16S131J RS1/16S151J RS1/16S131J RS1/16S131J RS1/16S131J RS1/16S131J RS1/16S121J RS1/16S0R0J RS1/16S151J
CAPACITORS
C C C C C C 1902 1905 1906 1907 1923 1930 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSQYB104K16 CKSQYB104K16
CAPACITORS
C C C C C C 1902 1905 1906 1907 1923 1930 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSQYB104K16 CKSQYB104K16
CWM7408 C Unit Number :: Keyboard (DEH-3330R/X1N/EW) Unit Name Unit
MISCELLANEOUS
IC Q D D D D D X S S S S S S S S S S S S S S S S S S S S 1903 1905 1901 1902 1903 1917 1918 1901 1901 1902 1903 1904 1905 1906 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1922 IC Transistor Chip Diode Chip Diode LED LED LED Radiator 5.00MHz Push Switch Push Switch Push Switch Push Switch Push Switch Push Switch Push Switch Push Switch Push Switch Push Switch Push Switch Push Switch Push Switch Push Switch Push Switch Push Switch Push Switch Push Switch Push Switch Switch LCD PD6294A DTC114EU MA151WK MA151WA CL170DCD NSSW440-9159 NSSW440-9159 CSS1423 CSG1114 CSG1114 CSG1114 CSG1114 CSG1117 CSG1114 CSG1117 CSG1117 CSG1117 CSG1117 CSG1117 CSG1117 CSG1117 CSG1117 CSG1114 CSG1114 CSG1114 CSG1114 CSG1111 CSD1061 CAW1627
CWM7375 B Unit Number :: Panel Unit Unit Name
MISCELLANEOUS
D S 1950 1950 LED Push Switch CL220PGC CSG1112
RESISTORS
R R 1952 1953 RS1/16S101J RS1/16S101J
CWX2411 D Unit Number :: Control Unit Unit Name
MISCELLANEOUS
IC IC IC Q D D X S S 201 301 701 101 801 802 201 801 802 IC IC IC Transistor Chip LED Chip LED Ceramic Resonator 16.934MHz Spring Switch(HOME) Spring Switch(CLAMP) UPD63711GC BA5985FM BA05SFP 2SB1132 CL203IRXTU CL203IRXTU CSS1456 CSN1051 CSN1052
RESISTORS
R R R R R R R R R R 101 102 103 201 202 203 204 205 206 207 RS1/8S120J RS1/8S100J RS1/16S222J RS1/16S104J RS1/16S103J RS1/16S393J RS1/16S103J RS1/16S103J RS1/16S182J RS1/16S123J
RESISTORS
R R R R R R R R R R 1900 1901 1902 1903 1904 1909 1910 1911 1912 1913 RS1/16S473J RS1/10S222J RS1/10S222J RS1/16S470J RS1/16S470J RS1/16S201J RS1/16S121J RS1/16S121J RS1/16S121J RS1/16S121J
37
DEH-3300R,3330R
=====Circuit Symbol and No.===Part Name --- ----------------------------------------------R R R R R R R R R R R R 302 303 501 502 601 602 605 606 801 803 902 906
Part No. ------------------------RS1/16S153J RS1/16S103J RS1/16S102J RA4C681J RS1/16S102J RS1/16S102J RS1/16S0R0J RS1/16S0R0J RS1/8S751J RS1/8S751J RS1/16S0R0J RS1/16S0R0J
=====Circuit Symbol and No.===Part Name --- -----------------------------------------------
Part No. -------------------------
E
Q Q
Unit Number : Unit Name : Photo Unit(S8)
1 2 Photo-transistor Photo-transistor CPT230SX-TU CPT230SX-TU
Miscellaneous Parts List
M M M 1 2 3 Pickup Unit(Service)(P8) Motor Unit(CARRIAGE) Motor Unit(LOADING) Motor Unit(SPINDLE) CXX1285 CXB2190 CXB2195 CXB2562
CAPACITORS
C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C 101 102 103 104 105 106 107 201 202 203 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 301 603 604 702 703 CKSRYB102K50 CKSRYB104K16 CEV101M6R3 CEV470M6R3 CKSQYB334K16 CKSQYB334K16 CKSQYB334K16 CKSRYB104K16 CKSRYB471K50 CKSRYB104K16 CEV101M6R3 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16 CKSRYB332K50 CKSRYB104K16 CKSRYB104K16 CKSRYB392K50 CKSRYB104K16 CKSRYB104K16 CCSRCJ3R0C50 CCSRCH270J50 CKSRYB104K16 CCSRCH181J50 CCSRCH510J50 CKSRYB682K25 CEV220M6R3 CKSRYB103K25 CKSRYB224K10 CEV101M10 CCSQSL152J50 CCSQSL152J50 CCH1349 CKSQYB334K16
10µF/10V
38
DEH-3300R,3330R
6. ADJUSTMENT
6.1 CD ADJUSTMENT
1) Precautions · This unit uses a single power supply (+5V) for the regulator. The signal reference potential, therefore, is connected to REFO(approx. 2.5V) instead of GND. If REFO and GND are connected to each other by mistake during adjustments, not only will it be impossible to measure the potential correctly, but the servo will malfunction and a severe shock will be applied to the pick-up. To avoid this, take special note of the following. Do not connect the negative probe of the measuring equipment to REFO and GND together. It is especially important not to connect the channel 1 negative probe of the oscilloscope to REFO with the channel 2 negative probe connected to GND. Since the frame of the measuring instrument is usually at the same potential as the negative probe, change the frame of the measuring instrument to floating status. If by accident REFO comes in contact with GND, immediately switch the regulator or power OFF. · Always make sure the regulator is OFF when connecting and disconnecting the various filters and wiring required for measurements. · Before proceeding to further adjustments and measurements after switching regulator ON, let the player run for about one minute to allow the circuits to stabilize. · Since the protective systems in the unit's software are rendered inoperative in test mode, be very careful to avoid mechanical and /or electrical shocks to the system when making adjustment. · Disc detection during loading and eject operations is performed by means of a photo transistor in this unit.Consequently, if the inside of the unit is exposed to a strong light source when the outer casing is removed for repairs or adjustment, the following malfunctions may occur. *During PLAY, even if the eject button is pressed,the disc will not be ejected and the unit will remain in the PLAY mode. *The unit will not load a disc. When the unit malfunctions this way, either re-position the light source, move the unit or cover the photo transistor. 2) Test Mode This mode is used for adjusting the CD mechanism module of the device. · Test mode starting procedure Reset while pressing the 4 and 6 keys together. · Test mode cancellation Switch ACC, back-up OFF. · After pressing the EJECT key, do not press any other key until the disk is completely ejected. · If the ] or [ key is pressed while focus search is in progress, immediately turn the power off (otherwise the actuator may be damaged due to adhesion of the lenses). · Jump operation of TRs other than 100TR continues after releasing the key. CRG move and 100TR jump operations are brought into the "Tracking close" status when the key is released. · Powering Off/On resets the jump mode to "Single TR (91)", the RF AMP gain setting to 0 dB, and the automatic adjustment value to the initial value.
39
DEH-3300R,3330R
- Flow Chart
4
Test Mode In Acc on
6
Sourse CD
SOURCE
New test mode
BAND
Power ON (Adjustment for T.Offset)
TRK MIN SEC
3
2 *1
6
Display
00 00 00
Power ON (Not adjustment for T.Offset)
TRK MIN SEC
RF AMP Gain Select
TRK MIN SEC
Display Power OFF
99 99 99
GG GG GG
BAND
Focus Close/ S Curve Check
TRK MIN SEC
3
Focus Mode Select
6 *2
1
] *8
[ *8
CRGSEC TRK MIN SEC
2 *3
Auto Adjustment Display Select
SEC TRK MIN SEC TRK
CRG+
MIN
TRK
MIN
Display
91 91 91
Display
0x 0x 0x
00 00 00
or
TRK MIN SEC
00 00 00
or
TRK MIN SEC
00 00 00
or
TRK MIN SEC
99 99 99
Power OFF
99 99 99
99 99 99
BAND
T.Close and F,T AGC and RF AGC and Fit Servo
1
6
3
]
[
2
T. Close and Fit Servo
RF AGC Coefficient Display/ Rough Servo and RF AGC
TRK
CRG+
MIN SEC
CRGTRK MIN SEC
T.Balance Adjustment
Display
8x 8x 8x
or
TRK MIN SEC
8x 8x 8x
or
TRK MIN SEC
9x 9x 9x
Power OFF
9x 9x 9x
Tracking Open
BAND
1 *7
F, T, RF AGC/ F.Bias Display Select
3
6 *5
]
[
2
*4 CRG-/TR Jump- *4
CRG+/TR Jump+
F, T AGC and RF AGC
CRG/TR Jump NO. Select
*6
TRK MIN SEC
Power OFF
Display
8x 8x 8x
or
TRK MIN SEC
BAND
Tracking Open
2
9x 9x 9x
SEC
*1 Display *2 Display
TYP
+6dB 06 06 06
+12dB 12 12 12
Display
TRK
MIN
8x 8x 8x
or
TRK MIN SEC
Focus Close 00 00 00 (99 99 99)
S Curve Check 01 01 01
9x 9x 9x
F.Cansel Display
*3
F.Offset Display
RF.Offset Display
F.Cancel Value = {Top Rank 8bit of Set Value (7F [H] to 80 [H] ) + 128} / 4 = 63 [D] to (32 [D] ) to 00 [D] *4 Single TR/32TR/100TR *5 Single TR Display 9x(8x):91(81) 32TRK 92(82) 100TRK 93(83) CRG Move 94(84)
*6 CRG Move, 100TR Jump Only *7 TRK, MIN, SEC F.AGC Gain T.AGC Gain RF AGC Gain
(F,T.AGC Gain = (Present Value/Initial Value) x 20) *8 Voltage of CRG Motor = 2 [V]
40
DEH-3300R,3330R
6.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT
· Note : The grating angle of the PU unit cannot be adjusted after the PU unit is changed. The PU unit in the CD mechanism module is adjusted on the production line to match the CD mechanism module and is thus the best adjusted PU unit for the CD mechanism module. Changing the PU unit is thus best considered as a last resort. However, if the PU unit must be changed, the grating should be checked using the procedure below.
· Purpose : To check that the grating is within an acceptable range when the PU unit is changed. · Symptoms of Mal-adjustment : If the grating is off by a large amount symptoms such as being unable to close tracking, being unable to perform track search operations, or taking a long time for track searching. · Method : · Measuring Equipment · Measuring Points · Disc · Mode
· Oscilloscope, Two L.P.F. · E, F, REFO · ABEX TCD-784 · TEST MODE
CONTROL UNIT
E F
E REFO
L.P.F. Xch 100k 390pF Ych
Oscilloscope
REFO
F REFO
100k 390pF L.P.F.
· Checking Procedure 1. In test mode, load the disc and switch the 5V regulator on. 2. Using the ] and [ buttons, move the PU unit to the innermost track. 3. Press key 3 to close focus, the display should read "91". Press key 2 to implement the tracking balance adjustment the display should now read "81". Press key 3 2 times. The display will change, returning to "81" on the fourth press. 4. As shown in the diagram above, monitor the LPF outputs using the oscilloscope and check that the phase difference is within 75° . Refer to the photographs supplied to determine the phase angle. 5. If the phase difference is determined to be greater than 75° try changing the PU unit to see if there is any improvement. If, after trying this a number of times, the grating angle does not become less than 75° then the mechanism should be judged to be at fault. · Note Because of eccentricity in the disc and a slight misalignment of the clamping center the grating waveform may be seen to "wobble" ( the phase difference changes as the disc rotates). The angle specified above indicates the average angle. · Hint Reloading the disc changes the clamp position and may decrease the "wobble".
41
DEH-3300R,3330R
Grating waveform
Ech Xch 20mV/div, AC Fch Ych 20mV/div, AC 30°
0°
45°
60°
75°
90°
42
DEH-3300R,3330R
7. GENERAL INFORMATION
7.1 DIAGNOSIS 7.1.1 TEST MODE
- Error Messages
If a CD is not operative or stopped during operation due to an error, the error mode is turned on and cause(s) of the error is indicated with a corresponding number. This arrangement is intended at reducing nonsense calls from the users and also for facilitating trouble analysis and repair work in servicing. (1) Basic Indication Method 1) When SERRORM is selected for the CSMOD (CD mode area for the system), error codes are written to DMIN (minutes display area) and DSEC (seconds display area). The same data is written to DMIN and DSEC. DTNO remains in blank as before. 2) Main unit display examples Depending on display capability of LCD used, display will vary as shown below. xx contains the error number. 8-digit display ERRORxx 6-digit display ERRxx OR Errxx 4-digit display Exx
(2) Error Code List Code Class Displayed error code Description of the code and potential cause(s) 10 Electricity Carriage Home NG CRG can't be moved to inner diameter. CRG can't be moved from inner diameter. Failure on home switch or CRG move mechanism. 11 12 Electricity Electricity Focus Servo NG Spindle Lock NG Subcode NG Focusing not available. Stains on rear side of disc or excessive vibrations on REWRITABLE. Spindle not locked. Sub-code is strange (not readable). Failure on spindle, stains or damages on disc, or excessive vibrations. A disc not containing CD-R data is found. Turned over disc are found, though rarely. Failure on home switch or CRG move mechanism. An appropriate RF AMP gain can't be determined. CD signal error. APC protection doesn't work. Focus can be easily lost. Damages or stains on disc, or excessive vibrations. Failed to reach target address. CRG tracking error or damages on disc. Power (VD) is ground faulted. Failure on SW transistor or power supply (failure on connector).
RF AMP NG 17 30 A0 Electricity Electricity System Setup NG Search Time Out Power Supply NG
Remarks: Mechanical errors are not displayed (because a CD is turned off in these errors). Unreadable TOC does not constitute an error. An intended operation continues in this case. A newly designed main unit must conform to the example given above. Upper digits of an error code are subdivided as shown below: 1x: Setup relevant errors, 3x: Search relevant errors, 3x: Search relevant errors, Ax: Other errors.
43
DEH-3300R,3330R
- New Test Mode
S-CD plays the same way as before. If an error such as off focus, spindle unlocking, unreadable sub-code, or sound skipping occurs after setup, its cause and time occurred (in absolute time) are displayed. During setup, operational status of the control software (internal RAM: CPOINT) is displayed. These displays and functions are prepared for enhancing aging in the servicing and efficiency of trouble analysis. (1) Shifting to the New Test Mode 1 Turn on the current test mode. 2 Select S-CD for the source through the specified procedure including use of the [SOURCE] key, and inserting the disc. Then, press the [ 6 ] key while maintaining the regulator turned off. 3 After the above operations, the new test mode remains on irrespective of whether the S-CD is turned on or off. You can reset the new test mode by turning on the reset start. * With some products, the new test mode can be reset through the same operations as that employed for shifting to the STBY mode (while maintaining the Acc turned off). (2) Key Correspondence Key Test mode Power Off Power On BAND To power on To power off (offset adjustment performed) ] [ 1 2 3 RF AMP gain switching FWD-Kick REV-Kick T.Close (AGC performed) /parameter display switching Parameter display switching /T.BAL adjustment/T.Open F.Close/RF AGC/F.T.AGC
In-play FF/TR+ REV/TRScan Mode
New test mode Error Production Time/Err.No. switching
To power on (offset adjustment not performed) 6 F.Mode switching Auto/Manu T.No./Time switching /T.Close (no AGC)/Jump switching Note: Eject and CD on/off is performed in the same procedure as that for the normal mode. (3) Cause of Error and Error Code Code Class Contents 40 Electricity Off focus detected. 41 42 43 Electricity Electricity Electricity Spindle unlocked. Sub-code unreadable. Sound skipping detected.
Description and cause FOK goes low. Damages/stains on disc, vibrations or failure on servo. FOK = Low continued for 50 msec. Damages/stains on disc, vibrations or failure on servo. Sub-code was unreadable for 50 msec. Damages/stains on disc, vibrations or failure on servo. Last address memory function was activated. Damages/stains on disc, vibrations or failure on servo.
Note: Mechanical errors during aging are not displayed. The error codes should be indicated in the same way as in the normal mode.
44
DEH-3300R,3330R
(4) Display of Operational Status (CPOINT) during Setup Status No. Contents 00 CD+5V ON process in progress. 01 Servo LSI initialization (1/3) in progress. 02 Servo LSI CRAM initialization in progress. 03 Servo LSI initialization (2/3) in progress. 04 Offset adjustment (1/3) in progress. 05 Offset adjustment (2/3) in progress. 06 Offset adjustment (3/3) in progress. 07 FZD adjustment in progress. 08 Servo LSI initialization (3/3) in progress. 10 Carriage move to home position started. 11 Carriage move to home position started. 12 Carriage is moving toward inner diameter. 13 14 15 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 Carriage is moving toward outer diameter. Carriage outer kick in progress. Carriage outer diameter feed (1 second) in progress. Servo close started. Pre-processing for focus search started. Spindle rotation and focus search started. Waiting for focus close (XSI=Low). Standing by after focus close is over. Focus search preprocessing is in progress while setup protection is turned on. Focus search preprocessing is in progress while focus recovery is turned on. Wait time after focus close is set up. Standing by after focus close is over. Setup (1/2) before T balance adjustment is started. Setup (2/2) before T balance adjustment is started. T balance adjustment started. T balance adjustment (1/2). T balance adjustment (2/2). Waiting for spindle rotation to end. Spindle rough servo. Standing by after spindle rough servo is over. RF AGC started. RF AGC started. RF AGC ending process in progress. Tracking close in progress. Standing by after tracking is closed. Carriage closing in progress. Focus/tracking AGC started. Focus AGC started. Focus AGC in progress. Tracking AGC in progress. Standing by after focus/tracking AGC are over. Spindle processes applicable servo. Check for servo close is started. Check of LOCK pin started. RF AGC started. RF AGC in progress. Standing by after RF AGC is over.
Protective action None None None None None None None None None None None Specified 10 seconds has been passed or failure on home switch. Specified 10 seconds has been passed or failure on home switch. None None None None None Specified focus search time has been passed. Specified focus search time has been passed. None None Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus or spindle not locked. Off focus. Off focus. Off focus.
45
DEH-3300R,3330R
(5) Display Examples 1) During Setup (When status no. = 11) TRK No. MIN. SEC. 11 11' 11" 2) During Operation (TOC read, TRK search, Play, FF and REV) The same as in the normal mode. 3) When a Protection Error Occurred Switch to the following displays (A) and (B) using the [BAND] switch: (A) Error occurrence timing display in absolute time. An example: Error occurred in 12th tune at 34'56" in absolute time. TRK No. 12 MIN. 34' SEC. 56"
(B) Error No. display An example: Error #40 (Off focus is detected) ERROR-40
46
DEH-3300R,3330R
7.1.2 DISASSEMBLY
- Removing the Case (not shown) 1. Remove the Case.
CD Mechanism Module
- Removing the CD Mechanism Module (Fig.1) Remove the four screws. Disconnect the connector and then remove the CD Mechanism Module. - Removing the Grille Panel Assy (Fig.1) Remove the two screws and then remove the Grille Panel Assy.
Grille Panel Assy
Fig.1
- Removing the Tuner Amp Unit (Fig.2) Remove the two screws. Straight the tabs at three locations indicated. Remove the screw. Remove the three screws and then remove the Tuner Amp Unit.
*) Tuner Amp Unit is different partially from this photo.
Tuner Amp Unit
Fig.2
47
DEH-3300R,3330R
- Removing the Upper Frame
1. Remove six Springs A, two Springs B and four Screws. 2. Remove two Tabs situated on rear side of the Upper Frame, remove two Arms on the front side, then remove two Tabs on the front side.
A Upper Frame A A
B
A
Arm
A
Arm
- Removing the Carriage Mechanism
1. Disengage the Carriage Mechanism from the two dampers situated in the front side by driving it up, then disengage and remove the mechanism from the two dampers by driving it up aslant into front side direction. Note : When assembling the Carriage Mechanism, coat the dampers with alcohol prior to the assembly.
B
A
Carriage Mechanism Section
- Removing the Clamp Arm Assy
1. Remove a Spring A, a B and a Spring C. 2. Drive the Clamp Arm Assy up into rear side direction, then disengage the arm from its current position Finally, drive the assembly approximately 45 degrees upward, then slide the assembly toward right side to remove it.
A Clamp Arm Assy Section B
C
48
DEH-3300R,3330R
- Removing the Guide Arm Assy
1. Remove a connector, a spring A and B 2. Drive the Guide Arm Assy up aslant into rear side direction, then remove it from a Pin. Finally, drive the assembly approximately 45 degrees upward, then slide the assembly toward left side to remove it. Note : When assembling the guide arm assembly, route the cord inside the assembly. In this operation, care must be exercised so that cord may be caught by the gear.
Guide Arm Assy Section
A
B Pin
- Removing the LO Arm Assy
1. Remove two Pins to dismount the LO Arm Assy.
LO Arm Assy Section
- Removing the Control Unit and the Spindle Motor
1. Remove from the connector after mounting the short pin on the flexible PCB of the pickup unit. 2. Remove two Soldered joints, then remove two Screws A. 3. Remove two connectors and a Screw B. 4. Disengage the Control Unit from two Tabs, then dismount the unit by sliding it toward left. 5. Dismount the Spindle Motor.
Short Pin
Spindle Motor
B
Control Unit
A
A
49
DEH-3300R,3330R
- Removing the Loading Motor and Carriage Motor
1. Remove the Spring and two Screws A. 2. Dismount the Loading Motor. 3. Remove the Belt, a Screw B, two Screws C, a Guide and a Screw Unit. 4. Dismount the Carriage Motor. Note : When assembling the Belt, use care so that it may not be contaminated by grease.
C Guide
B Screw Unit Carriage Motor
Belt
C
A
A Loading Motor
- Removing the Pickup Unit
1. Remove two Screws and a Shaft. 2. Dismount the Pickup Unit.
Pickup Unit
Shaft
50
DEH-3300R,3330R
7.1.3 CONNECTOR FUNCTION DESCRIPTION
FRONT OUTPUT
FUSE 10A
2 1
10
16 15
REAR OUTPUT ANTENNA JACK
1. RR+ 2. FR+ 3. RR4. FR5. RL+ 6. FL+ 7. RL8. FL9. NC 10. TEL 11. ILM 12. B.REM 13. ACC 14. NC 15. B.UP 16. GND
51
DEH-3300R,3330R
7.2 PARTS 7.2.1 IC
PAL006A
sw_vcc
Protector; Over voltage
1
amp_vcc Stand-by Circuit
TAB P-GND2 OUT2STBY OUT2+ VCC OUT1P-GND1 OUT1+ SVR IN1 IN2 S-GND IN4 IN3 AC-GND OUT3+ P-GND3 OUT3VCC OUT4+ MUTE OUT4P-GND4 SWITCH
Reference
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Mute circuit
+-
Offset Detection
Protector; Thermal
-+ +-
Offset Detection
-+
amp_vcc
Protector; Short circuit
+-
Offset Detection
-+ +-
Offset Detection
-+
sw_vcc
stby
Protector; Over current limit
52
DEH-3300R,3330R
PML008A
IN4 -_R
34 33 Sel_out_R 32 PV_in_R
fromRch to Rch
44
43
42
41
40
39
38
37
36
Sel_out_L 1 PV_in_L
2
Isolator circuit
Rch block (same as Lch)
Source Gain adjuster
Tone_out_FL 3
Primary volume
IN4+_R
35
IN4 -_L
IN4+_L
IN1_R
IN2_R
IN3_R
IN3_L
IN2_L
IN1_L
Vcc
31 Tone_out_FR 30 SV_in_FR 29 Tone_out_RR 28 SV_in_RR
SV_in_FL 4
Treble Middle Bass Loudness volume
LPF (L+R)
Tone_out_RL 5 SV_in_RL 6 NC 7 NC 8 AGND_L
9
Anti Alias filter
Anti radiation filter Anti radiation filter
Treble2
27 NC 26 NC 25 AGND_R
Bass2
MUTE
Front_out_L 10 Rear_out_L 11
12
Secondary volume
Zero cross detect circuit
Digital block
24 Front_out_R 23 Rear_out_R
Secondary volume
13
14
15
16
17
18
19
20
21
22
MUTE
DGND
DATA
STB
CLK
Vref
NC
NC
NC
NC
NC
*PD6294A 80 1 61 60
IC's marked by* are MOS type. Be careful in handing them because they are very liable to be damaged by electrostatic induction. 20 21 40 41
- Pin Functions (PD6294A)
Pin No. 1 2 3 4 5,6 7 8 9 10 11 12 1316 17-22 23 24-73 7477 78 79,80 Pin Name VSS X1 X0 NC MOD1,0 DIMMER KYDT DPDT REMIN GRN AMB KD41 KST61 VDD SEG490 COM30 VLCD V2,1 I/O Function and Operation GND Crystal oscillator connection pin Crystal oscillator connection pin Not used Connect to GND Dimmer select output Key data output Display data input Remote control pulse input Dual Illumination (Green) Dual Illumination (Amber) Key data input Key strobe output VDD LCD segment output LCD common output LCD voltage input Power supply terminal
53
I O O I I
I O O O I
DEH-3300R,3330R
- Pin Functions (PE5202A)
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27,28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 Pin Name HFPW dsens NC EJECTIN TESTIN LCDPW TELIN isens FLPILM DALMON reset XT2 XT1 VSS(GND) X2 X1 REGOFF REGC VDD ILMPW SYSPW adpw SWVDD IPPW ROT1 ROMDATA NC ROT0 RECIVE NC pce2 STB CLK DATA NC MUTE SD ST VSS(GND) VDD fm/AM drst rdslk RDT currq NL2DT tmute SDBW LOCL LOCH NC EJECT LOCK CD5VON clamp VDCONT NC FOK I/O O I I I O I I O I Function and Operation Hands free circuit ON output Grille detach sense input Not used Eject sense input Test program mode input LCD back light power supply control output Telephone mute input Illumination sense input Flap illumination input For consumption low-current Reset input Not used (open) Clock connection pin GND Crystal oscillator connection pin Crystal oscillator connection pin Regulator operation specification signal Capacitor for regulator connect pin Power supply Illumination power supply control output System power control output A/D converter power supply control output Grille:Chip enable output Power supply control output for IP BUS interface IC Rotary input 1 ROM collection data output Not used Rotary input 0 During RDS data reception output Not used EEPROM chip enable output Strobe pulse output for electronic volume Clock output for electronic volume Data output for electronic volume Not used System mute output Station detector input FM stereo input GND Power supply TUNER:Decoder power supply control output RDS:Decoder reset output RDS:Decoder clock input RDS:Decoder data input RDS:Tuner voltage FIX output RDS:Noise level input 2 RDS:Tuner mute output RDS:SD input Local L output Local H output Not used CD:Load motor eject output CD:Disc spindle lock input CD:+5V power supply control output CD:Disc clamp input CD:VD power control output Not used CD:Focus OK signal input
O O O O O I O I O O O O O O I I
O O I I O I O I O O O I O I O I
54
DEH-3300R,3330R
Pin No. 60,61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85,86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
Pin Name NC PCL CONT CDLOAD xsck XSI XSO XA0 xrst xstb NC MUTE TEST(GND) SL NL1 MODELIN CSENS EJTSNS DSCSNS VDSENS TEMP AVDD AVREF AVSS NC NMI ldet rck RDS57K NC asens bsens TUNPDI KYDT DPDT PCK PDO PCE PEE
I/O
O O O I O O O O O I I I I I I I I I
I I I I I I I O O O O O
Function and Operation Not used Clock adjustment CD:Servo driver power supply control output CD:LOAD motor loading control output CD:LSI clock output CD:LSI data input CD:LSI data output CD:LSI command / data control output CD:LSI reset control output CD:LSI strobe output Not used E.VOL:Mute control output GND TUNER:Signal level input RDS:Noise level input 1 Model select input Flap close sense input CD:Eject sense input CD:Disc insert sense input CD:VD voltage sense input CD:Temperature sense input A/D converter power supply terminal A/D converter reference voltage terminal GND Not used GND PLL lock sense input RDS:clock input RDS:57kHz count pulse input Not used ACC power sense input Back up power sense input PLL IC data input Grille data input Grille data output PLL IC clock output PLL IC data output PLL IC chip enable output Beep tone output
*PE5202A 30 1 100 81 51 80 31
50
55
DEH-3300R,3330R
FM/AM TUNER UNIT
AMRF
28 AMANT
FM/AM 1ST IF 10.7MHz T51 Q51 CF51 CF52 CF53
MPXREF 41kHz AMDET IC 2 FM MPX
L ch 6 R ch 5
ATT
ANT ADJ
FMANT 27 RFGND 26
IC1 MIXER, IF AMP, DET.
COMP LDET
21 18
ATT FMRF CF202 IMG ADJ AM 2ND IF X901 450kHz 10.25MHz
WC NC NC
IC 3 EEPROM
FMLOCL SDBW DGND FMSD DI/DO NL1 NL2 4 CE2 CE1 STIND 1
NC
CK
LOCH 23 25
LOCL
7 17 20 22 10 19 14
24
9
11 12 15 16
8
SL 13
RF ADJ
CREQ
VDD VCC
2
3
- Pin Functions
No. Symbol I/O Explain 1 STIND O stereo indicator 2 FMSD O FM station detector "Low" when the FM stereo signals are received. To be pulled up to the "VDD" at 47k. "High" when signals are received. To be pulled up to the "VDD" at 47k Meanwhile, 10k should be used when taking diver FIX trigger from here and "High: 0.9VDD or more" and "Low: 250mV or less". (Should satisfy the diver IC specifications) 3 NL1 O noise level-1 "High" when noise is received. Output for the RDS. GND at 47k //1,800pF. 4 NL2 O noise level-2 "High" when noise is received. Output for the RDS. GND at 36k //330pF. 5 Rch O R channel FM stereo "R-ch" signal output or AM audio output. output Add the specified di-emphasis constant. 6 Lch O L channel FM stereo "L-ch" signal output or AM audio output. output Add the specified di-emphasis constant. 7 WC write control EEPROM write control. Writing permissible at "Low". Normally open. 8 SDBW O SD bandwidth SD bandwidth signal output. For detection of detuning data for the RDS. 9 NC Not used 10 VDD power Power supply pin for the digital section. supply D.C. 5V +/- 0.25V. Be careful about overlapping noise in the logic section. 11 DGND digital ground Grounding for the digital section. 12 CE2 I chip enable-2 EEPROM chip enable. Active a "Low" To be pulled up to the "VDD" at 47k 13 SL I/O signal level Received FM/AM signal level (strength) output. Connect the specified load resistor and capacitor (10k + 39k //4,700pF) 14 DI/DO I/O data input/ Data input/Data output data output To be pulled up to the "VDD" at 47k 15 CK I clock Clock input To be pulled up to the "VDD" at 47k 16 CE1 I chip enable-1 AF·RF chip enable. Active at "High" To be grounded at 47k 17 NC Not used 18 LDET O lock detector Active at "Low". To be pulled up to the "VDD" at 47k 19 CREQ I current request Active at "Low". To be grounded at 47k 20 NC Not used 21 COMP O composite signal FM composite signal output. r out < 100 22 VCC power supply Analog section power supply pin.D.C.8.4V +/- 0.3V 23 LOCH I local high FM local high pin. When seeking local high, apply 5V together with "LOCL". 24 FMLOCL I FM local low FM local low pin. When seeking local low, apply 5V to the base of the NPN transistor with which the specified resistor is being connected to the emitter. Keep it open in case of ordinary marketed models. 25 LOCL I local low FM/AM local low pin. When seeking local low, apply 5V to the base of the NPN transistor. Since this pin is exclusive for AM when the FMLOCL is in use, do not drive it under FM. 26 RFGND RF ground Grounding for the antenna section. 27 FMANT I FM antenna input FM antenna input. 75. Serge absorber (DSP-201M-S00B) is necessary. 28 AMANT I AM antenna input AM antenna input. High impedance. Connect to the antenna through an L (LAU type) of 4.7µH.To cope with the power transmission line hums, insert a series circuit consisting of an L (a coil of about 100mH) + R (a resistor of 470 to 2.2k) between the GND.
56
- CAW1627
7.2.2 DISPLAY
DEH-3300R,3330R
57
62 61 60 59 58 57 56 55 54 53 (COM3 ) (COM0 ) (COM1 ) (COM2 ) (COM1 ) (COM0 ) (COM1 ) (COM2 ) (COM1 ) (COM0 ) 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 (COM3 ) (COM0 ) (COM1 ) (COM2 ) (COM1 ) (COM0 ) (COM1 ) (COM2 ) (COM1 ) (COM0 ) (SEG49) (SEG45) (SEG48) (SEG47) (SEG46) (SEG45) (SEG44) (SEG43) (SEG42) (SEG41) (SEG40) (SEG39) (SEG38) (SEG37) (SEG36) (SEG35) (SEG34) (SEG33) (SEG32) (SEG31) (SEG30) (SEG29) (SEG28) (SEG27) (SEG26) (SEG25) (SEG24) (SEG23) (SEG22) (SEG21) (SEG20) (SEG19) (SEG18) (SEG17) (SEG16) (SEG15) (SEG14) (SEG13) (SEG12) (SEG11) (SEG10) (SEG 9) (SEG 8) (SEG 7) (SEG 6) (SEG 5) (SEG 4) (SEG11) (SEG 3) (SEG 2) (SEG 1) (SEG 0)
COMMON
SEGMENT
DEH-3300R,3330R
7.3 OPERATIONAL FLOW CHART
Power ON
VDD=5V 19pin
bsens 93pin bsens=L asens 92pin asens=L dsens 2pin dsens=L adpwH 22pin
CSENS 77pin 2VStarts communication with Grille microcomputer.
- 2V
300ms
SWVDDH 23pin Source keys operative
300ms In case of the above signal, the communication with Grille microcomputer may fail. If the time interval is not 300msec, the oscillator may be defective.
Source ON
SYSPWH 21pin
Completes power-on operation. (After that, proceed to each source operation)
58
DEH-3300R,3330R
8. OPERATIONS AND SPECIFICATIONS
8.1 OPERATIONS
Key Finder
Head Unit
EQ button VOLUME 5//2/3 buttons SFEQ button OPEN button
SOURCE button DISPLAY button
Buttons 1-6
TA button PTY button FUNCTION button
AUDIO button
BAND button
59
DEH-3300R,3330R
60
Basic Operation
Basic Operation of Tuner
This product's AF function can be switched ON and OFF. AF should be switched OFF for normal tuning operations.
To Listen to Music
The following explains the initial operations required before you can listen to music.
Note:
· Loading a disc in this product.
1. Select the desired source. (e.g. Tuner)
Manual and Seek Tuning · You can select the tuning method by changing the length of time you press the 2/3 button.
Manual Tuning (step by step) Seek Tuning 0.5 seconds or more 0.5 seconds or less
Each press changes the Source ...
Each press of the SOURCE button selects the desired source in the following order: Built-in CD player = Tuner Note:
Note:
· If you continue pressing the button for longer than 0.5 seconds, you can skip broadcasting stations. Seek Tuning starts as soon as you release the button. · Stereo indicator " " lights when a stereo station is selected.
· The sound source will not change if no disc is set in this product. · When this product's blue/white lead is connected to the car's Auto-antenna relay control terminal, the car's Auto-antenna extends when this product's source is switched ON. To retract the antenna, switch the source OFF.
Frequency Indicator Band Indicator Preset Number Indicator
2. Raise or lower the volume.
Rolling the VOLUME changes the volume level.
Note:
· Roll clockwise to raise the volume level. · Roll counterclockwise to lower the volume level.
3. Turn the source OFF. Preset Tuning · You can memorize broadcast stations in buttons 1 through 6 for easy, one-touch station recall.
Preset station recall Broadcast station preset memory 2 seconds or less 2 seconds or more
Band
F1 (FM1) = F2 (FM2) = F3 (FM3) = MW/LW
Hold for 1 second
Note:
· Up to 18 FM stations (6 in F1 (FM1), F2 (FM2) and F3 (FM3)) and 6 MW/LW stations can be stored in memory. · You can also use the 5 or buttons to recall broadcast stations memorized in buttons 1 through 6.
Basic Operation
Basic Operation of Built-in CD Player
Note:
· Be sure to close the front panel after loading or ejecting a disc.
Open
Note:
· Use to open the front panel when loading or ejecting a CD. (The illustration on the right shows the front panel open.)
CD Loading Slot
Note:
· The Built-in CD player plays one standard 12 cm or 8 cm (single) CD at a time. Do not use an adapter when playing 8 c