Text preview for : Readme.txt part of panasonic nv ds Abilitazione ingresso DV videocamere Panasonic
Back to : PanaList.zip | Home
WHAT IS PANALIST?
It is small program for reading codes (addresses 00 to FF, page 0 or 1) from VCR memory of Panasonic cameras. These codes are written (or added) to the file PanaList.txt.
This program IS NOT writing anything to camera's memory.
WHAT DO YOU NEED?
PC with Win95/98 and free serial port
still capture port and cabel (how to make - http://www.cis.tu-graz.ac.at/wb/dvin/panautil.htm)
INSTALLING AND USING
Simply unpack to some directory. Connect PC and cam. Turn on cam and switch to VCR mode. Run and click on button List. Progress is indicated in gray field and you'll see read codes in list box. Before disconnecting turn off cam and close PanaList!
Warning!
Always close program and turn off the cam before connecting or disconecting cable to cam.
Last updated 30.7.2000
1999-2000 Copyright Michal Krejcik
Jablonec nad Nisou
Czech Republic
[email protected]
DVzone
http://www.volny.cz/mkrejcik