Text preview for : instruction Inst Catalog Visa_GB.pdf part of Catalogo VISA Catalogo VISA Catalogo VISA



Back to : Catalogo Visa.part1.rar | Home

Electronic Design and Industrialization

INSTALLATION:
Once downloaded the Visa catalogue will be positioned in the following Path: C:\WINDOWS\Temp\ ,as indicated below:

1) Doubleclick on the Zip-file "VISA APRILE 2005 " 2) Maintain all default settings 3) Click the "Unzip" button

Verify that the Path effectively corresponds with C:\WINDOWS\Temp; otherwise select using the "Browse"-button

Electronic Design and Industrialization

4) Upon completion, you will find a Directory named "VISA APRILE 2005 under "Temp" containing all files

5) Doubleclick on the installation file "InstCatVisa" 6) The following Setup window will appear

Confirm with OK to start the installation of the catalogue

Electronic Design and Industrialization

7) Leave all settings UNCHANGED in the following wjndow

Click on the Icon (top left side) 8) A Window will open showing the status of progression of the installation

Electronic Design and Industrialization

9) Upon completion of the setup, click OK

10) From this point, the installation procedure of images and documents will start

Electronic Design and Industrialization

11) Once finished, the follow window will appear

Press any button on the keyboard to complete the procedure

12) An Icon figuring a Remote Control The catalogne is ready for use

will be positioned on your Desktop

Electronic Design and Industrialization

DISINSTALLATION:
1) Select from the directory C:\WINDOWS\Temp\VISA APRILE 2005 the application "InstCatVisa" and doubleclick on it. Follow window will appear

2) Select from the control pannel "Catalogo VISA" and click on the button Cambia/Rimuovi (Change/Remove) Following window appears:

Electronic Design and Industrialization

Confirm removal of the catalogue by clicking on the "Si" (Yes) button. 3) At the end of the disinstallation, the program will confirm that the procedure has been successfully completed.

Select the OK-button; 4) Exit the control pannel 5) At this point all windows will have closet except the following one

Press any key to continue the disinstallation

Electronic Design and Industrialization

6) All files and Directories will be removed 7) At the end, the window of the installation of the catalogue will appear again as shown:

Select "Exit Setup" 8) Confirm the exit

Electronic Design and Industrialization

9) Error indications will apear

Confirm with OK 10) At the end, following window appears

Confirm with OK

Electronic Design and Industrialization

11) A confirmation message will appear. Press OK to terminate the whole procedure.

UPDATE:
To install an update of the catalogue, please proceed as for the disinstallation procedure points (1) to (6) and onwards points (6) up to (12) from the Installation procedure .

ATTENTION !

Before starting the installation and utilisation of this software, please carefully read the following: 1) This software is developed to assist the end-user to choose a Visa remote control compatible with its original. 2) Its content is purely for information purposes. Visa Electronics declines any responsibility regarding exactness and truthfulness. Visa Electronics reserves the right to introduce any modification of technical nature or of its content at any time without any notice. 3) The complete software and data contained in it are of exclusive proprietary right by Visa.

It is severely prohibited to copy this software, even partilally. Any violation will be punished by law.